![]() |
|
|
#1 |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
OCing a i7 930
Im not new to overclocking at all but i just messed around with a i7 930 i have and i seem to be getting crazy over clocks on low voltage
example: 4ghz 20x200 @ 1.24v i have even linx tested for 24 hours/ prime 95 100 passes / OCCT Through all that it passed perfectly has anyone else seen clocks like those on that low of volts. I haven not tried to go lower but its performing amazing and i might be able to get it stable even lower example 4.3ghz 21x205 @just over 1.3v (cant remember exact but just one bump) Cooling is the only thing holding me back but i wanted input to see what other people think Thanks
__________________
|
|
|
|
| The Following User Says Thank You to adam99leit For This Useful Post: |
|
|
#2 |
|
Eligible for custom title
Join Date: May 2006
Location: TX, USA
Posts: 6,477 (2.54/day)
Thanks: 293
Thanked 792 Times in 708 Posts
|
im use 1.213v for 4ghz
|
|
|
|
| The Following User Says Thank You to DOM For This Useful Post: |
|
|
#3 |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
tonight i think im gonna try for lower i just set it to 1.24 and kept ocing and got surprised when i got to 4ghz
__________________
|
|
|
|
|
|
#4 |
|
Eligible for custom title
Join Date: May 2006
Location: TX, USA
Posts: 6,477 (2.54/day)
Thanks: 293
Thanked 792 Times in 708 Posts
|
i havent try less also i just set it and ran occt and meh i hope to get to play with the ss this weekend
but my temps are alot lower then the 920 vs 980x but after 4.4ghz + 1.4v + there the same lol |
|
|
|
| The Following User Says Thank You to DOM For This Useful Post: |
|
|
#5 |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
lol yeah after that point its just HOT i wanna tune it in for the best 24/7 settings
__________________
|
|
|
|
|
|
#6 |
![]() |
I need 1.355 or something for 4.2
![]() Its confusing when you get errors and you dont know where its coming from.. |
|
|
|
|
|
#7 |
![]() Join Date: Oct 2008
Location: Australia
Posts: 2,473 (1.47/day)
Thanks: 1,248
Thanked 627 Times in 407 Posts
|
I'm clocking mine right now, I couldn't go below 1.3 vcore setting in bios because my uncore was set to auto -.- ...
but yes people with i7 930 trying to achieve 4ghz with low voltages DO NOT LEAVE UNCORE ON AUTO! It must be 2 times the ram speed only! Unless you want to use 1.5vtt and ruin your mobo . Anyway im at 1.264 vcore atm & 1.295VTT gonna go lower now ![]() I have a batch B number : BX80601930 |
|
|
|
| The Following 2 Users Say Thank You to random For This Useful Post: |
|
|
#8 |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
With my mobo i can basically set anything + i have it on liquid as well so keeps it nice and cool booted 4.5ghz BTW just to see if i could it was hot but with some cooling changes i wonder what i can do with this chip its really impressing me
FYI cpu is on a crap liquid loop so once i do something proper temps will drop a ton to
__________________
|
|
|
|
|
|
#9 |
![]() Join Date: Oct 2008
Location: Australia
Posts: 2,473 (1.47/day)
Thanks: 1,248
Thanked 627 Times in 407 Posts
|
well it seems mine has a default voltage of 1.23vcore, I'm currently running a test on 1.232 vcore so far so good no errors. Its definitely running cool, hasn't passed 60 on my setup just yet but im sure it will, I'll report back with my final settings!
|
|
|
|
| The Following User Says Thank You to random For This Useful Post: |
|
|
#10 | |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
Quote:
__________________
|
|
|
|
|
|
|
#11 |
![]() Join Date: Oct 2008
Location: Australia
Posts: 2,473 (1.47/day)
Thanks: 1,248
Thanked 627 Times in 407 Posts
|
Well in regards to my CPU,
HT OFF = 1.264vcore - 60 Degrees HT ON = 1.280vcore - 70 Degrees Those seem like my choices for 4ghz, I'd say about average, not too bad not too good. Time to overclock my RAM
|
|
|
|
|
|
#12 |
![]() |
|
|
|
|
|
|
#13 |
![]() Join Date: Oct 2008
Location: Australia
Posts: 2,473 (1.47/day)
Thanks: 1,248
Thanked 627 Times in 407 Posts
|
Alright I think I've found my setup, I'm quite confident this is stable since it is after all with Hyper-threading Off.
![]() ![]() Finished stress testing it, Its fine by my standard.
Last edited by random; Aug 11, 2010 at 07:57 AM. Reason: Stress test finished! 25 Passes of Linx at 1.24vcore! Stable enough for me |
|
|
|
| The Following User Says Thank You to random For This Useful Post: |
|
|
#14 |
![]() Join Date: Oct 2007
Location: nunica MI
Posts: 290 (0.14/day)
Thanks: 107
Thanked 71 Times in 52 Posts
|
while i messed with mine a bit more and heres the best so far
http://valid.canardpc.com/show_oc.php?id=1352267 4.2ghz @1.3v
__________________
|
|
|
|
|
|
#15 | |
![]() Join Date: Oct 2009
Location: Republic of Texas
Posts: 1,421 (1.07/day)
Thanks: 334
Thanked 500 Times in 337 Posts
|
Quote:
__________________
*Gaming Rig: i7 2600k | ASUS Maximus IV Gene-Z Intel Z68 | 8gb Corsair Dominator GT | ASUS ENGTX580 DCII | Intel 510 series 120gb | Corsair 650d *Daily Rig: i7 860 | GA-P55A-UD6 | 8gb Corsair Dominator III | HD5770 | x2 250gb WD RE4 Raid0 | Haf932 Modded *Server: i3 540 | GA-H55N-USB3 | 4gb Corsair XMS DDR3 | x4 500gb WD Blue | lian li pc-q08b | My HeatWare | My For Sale | SteamID | |
|
|
|
|
|
|
#16 | |
![]() Join Date: Oct 2008
Location: Australia
Posts: 2,473 (1.47/day)
Thanks: 1,248
Thanked 627 Times in 407 Posts
|
Quote:
![]() That's like asking someone why buy a ferrari when you can buy a camry? They both drive on roads with the same speed limits ![]() And I appreciate having HT there when I need to mass encode some anime etc. But other than that it should stay off :P |
|
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| i7 930 @ 4.2 | travva | Overclocking & Cooling | 3 | May 19, 2010 08:53 AM |
| Overclocked i7 930 | Trudint | Overclocking & Cooling | 6 | May 18, 2010 04:23 PM |
| Overclocking my i7 930 | Aceman.au | General Hardware | 3 | May 17, 2010 04:48 AM |
| O/Cing my 930 | Aceman.au | Overclocking & Cooling | 5 | Apr 7, 2010 11:52 AM |
| First time ocing x1950pro 256mb. gpu temps, ocing, etc.? | panchoman | Graphics Cards | 10 | Oct 29, 2007 08:03 PM |