Help Q9550 not stable even in 3.4(F..ing mad) Really. - Page 5

remdiablo · Aug 26, 2010, 08:18 PM

Quote:

Originally Posted by trickson

Were are you at on it right now ? Post your settings all the bios ones please .

there is a pic in above post .can you take a look. please

trickson · Aug 26, 2010, 08:23 PM

NO re-post . I need the BIOS pics Only them .

remdiablo · Aug 26, 2010, 08:39 PM

Quote:

Originally Posted by trickson

NO re-post . I need the BIOS pics Only them .

Ok.

http://forums.techpowerup.com/attach...1&d=1282854935

http://forums.techpowerup.com/attach...1&d=1282855165

trickson · Aug 26, 2010, 08:46 PM

I think I see the problem . these MB don't like going over 450MHz FSB . The Mult on your CPU is at 8.5 can you change it to 9.0 ? If not that is another thing these boards don't like very much . changing the voltage at this point is not going to work . you have hit the wall unless you can get that to a X9 Multiplier !

remdiablo · Aug 26, 2010, 08:48 PM

Quote:

Originally Posted by trickson

I think I see the problem . these MB don't like going over 450MHz FSB . The Mult on your CPU is at 8.5 can you change it to 9.0 ? If not that is another thing these boards don't like very much . changing the voltage at this point is not going to work . you have hit the wall unless you can get that to a X9 Multiplier !

Q9550 has only 8.5 Multiplier or lower .

remdiablo · Aug 26, 2010, 08:49 PM

may be I should try x8 multiplier

trickson · Aug 26, 2010, 08:53 PM

Quote:

Originally Posted by remdiablo

may be I should try x8 multiplier

You can try that it may help .

remdiablo · Aug 26, 2010, 09:12 PM

Quote:

Originally Posted by trickson

You can try that it may help .

Hey Man I got Boot to Windows At 4 Ghz right now.
did not test it yet.

multiplier 8.5 FSB470 Vcore 1.41875 ram 6,6,6,18 NB 1.36 CPU PLL 1.50 ,rest is on AUTO
http://forums.techpowerup.com/attach...1&d=1282857115

remdiablo · Aug 26, 2010, 09:41 PM

Quote:

Originally Posted by trickson

You can try that it may help .

Any suggestion on that ???

http://forums.techpowerup.com/attach...1&d=1282858842
http://forums.techpowerup.com/attach...1&d=1282858842

trickson · Aug 26, 2010, 09:44 PM

Cool ! You can take the GTL ref to 0.65x that would be about it . Is it stable ? run prime 95 and see . Not OCCT not just yet .

remdiablo · Aug 26, 2010, 09:47 PM

Quote:

Originally Posted by trickson

Cool ! You can take the GTL ref to 0.65x that would be about it . Is it stable ? run prime 95 and see . Not OCCT not just yet .

ok i will run prime 95 now let you know

trickson · Aug 26, 2010, 09:48 PM

You can even take the CPU to 1.45 Volts , This may add some stability .

remdiablo · Aug 26, 2010, 09:50 PM

Quote:

Originally Posted by trickson

Cool ! You can take the GTL ref to 0.65x that would be about it . Is it stable ? run prime 95 and see . Not OCCT not just yet .

first attempt of prime95 fail in 5 sec

trickson · Aug 26, 2010, 09:54 PM

Take the Vcore to 1.45 NOT any higher and the GTL ref to 0.65x . That may do the trick .

remdiablo · Aug 26, 2010, 10:42 PM

Just be sure. Do you use all 8 pin to power your CPU or just 4(i'm using all 8) may be that giving me an overvoltage at 1.45v,it looks like over everything is kind of slow. and prime 95 fail in3 min 43 sec.

trickson · Aug 26, 2010, 10:45 PM

Quote:

Originally Posted by remdiablo

Just be sure. Do you use all 8 pin to power your CPU or just 4(i'm using all 8) may be that giving me an overvoltage at 1.45v,it looks like over everything is kind of slow. and prime 95 fail in3 min 43 sec.

Yes 8 pin power on mine too . Thing is it may have hit the wall . I am out of ideas now . sorry . Hey but you can over clock better right ? Just keep tinkering with it .

remdiablo · Aug 26, 2010, 10:50 PM

Quote:

Originally Posted by trickson

Yes 8 pin power on mine too . Thing is it may have hit the wall . I am out of ideas now . sorry . Hey but you can over clock better right ? Just keep tinkering with it .

Oh yea. I will working on it, till I break my record.and will post my progress

trickson · Aug 26, 2010, 10:54 PM

Quote:

Originally Posted by remdiablo

Oh yea. I will working on it, till I break my record.and will post my progress

Good luck my friend I am glad I could help what little I did ( If any )

...

remdiablo · Aug 29, 2010, 07:51 AM

Quote:

Originally Posted by trickson

Good luck my friend I am glad I could help what little I did ( If any )

...

is any idea what should I raise ??? it looks not bad ,just one core went down with an error.
can you take a look?

http://forums.techpowerup.com/attach...1&d=1283067688

http://forums.techpowerup.com/attach...1&d=1283067743
i do not know. third pic wont Upload some why? upload of file failed. ok
cpu 1.43125v
cpu gtl ref 0.65x
cpu pll 1.50 v
fsb term volt (auto)
DRAM volt 2.12
NB volt 1.36 v
pcie sata (auto)
LLC (Enebled)
CPU spred sp (disableb)
pcie spred sp (disabled)
cpu clock skew (auto)
nb clock skew (auto)
cpu margin enhanecement (prformance mode)

newtekie1 · Aug 29, 2010, 01:43 PM

I would suggest dropping the multiplier from 8.5 to 6. This will temporarily drop the CPU speed to allow you to run the stress test and see if it is the CPU causing the error, or something else.

The RAM running at 943MHz might be too much for it, even with the loose timings, is there an option to run the RAM at a slower speed?

mm67 · Aug 29, 2010, 02:53 PM

1:1 FSB : DRAM ratio is the lowest you can get on Intel board, only Nvidia boards allow unlinking of memory and FSB

NinkobEi · Aug 29, 2010, 03:07 PM

78 degrees still seems high to me. maybe you should back down the voltage. its very possible that voltage isnt the issue. +1 to newtekie's suggestion.

remdiablo · Aug 29, 2010, 05:47 PM

Quote:

Originally Posted by newtekie1

I would suggest dropping the multiplier from 8.5 to 6. This will temporarily drop the CPU speed to allow you to run the stress test and see if it is the CPU causing the error, or something else.

The RAM running at 943MHz might be too much for it, even with the loose timings, is there an option to run the RAM at a slower speed?

hi thanks for advise I'l give it a shot today.But on 3.6 ghz it works Fine even with prime95.this settings:
FSB : 425
Mulyiplier 8.5
PCI E freguency 100
Dram 851 mhz
strap to NB 333
all timing (auto)
Mem OC charger (enebled)
Ai clock twister (stronger)
cpu 1.31875v
cpu gtl ref (auto)
cpu pll (auto)1.70 v
fsb term volt (auto)
DRAM volt 1.80v
NB volt 1.10 (auto)
pcie sata (auto)
LLC (Enebled)
CPU spred sp (disableb)
pcie spred sp (disabled)
cpu clock skew (auto)
nb clock skew (auto)
cpu margin enhanecement (prformance mode)

remdiablo · Aug 30, 2010, 05:16 PM

Quote:

Originally Posted by newtekie1

I would suggest dropping the multiplier from 8.5 to 6. This will temporarily drop the CPU speed to allow you to run the stress test and see if it is the CPU causing the error, or something else.

The RAM running at 943MHz might be too much for it, even with the loose timings, is there an option to run the RAM at a slower speed?

So I did memtest 86.i left it work over night at FSB 475 and multiplier 6 ,I got 10 Passes with 0 errors,I think my memory is fine.what else I can do?

remdiablo · Aug 30, 2010, 05:23 PM

I think I just have to switch to Asus Rampage III formula and I7 930 .disapointed for now

Now i just out of any Idea,what this chip is wants ???

System Name:	RemDiablo
Processor:	Q9550 2.8 ghz (3.8ghz) C1
Motherboard:	ASUS P5Q PRO TURBO
Cooling:	Corsair H70
Memory:	Kingston HyperX 1100mhz 4GB
Video Card:	EVGA GTX 680 FTW + 4GB
Hard Disk:	SSD 64GB Kingston (boot),WD 1TB 7200 RPM storage
Optical Drive:	Lite On 24x DVD-RW
CRT/LCD Model:	3x Acer 21" monitors
Case:	HAF X Modded
Sound Card:	Corsair H1
PSU:	Corsair 1200W
Software:	WIN 7 Ultimate 64-bit
Benchmarks:	3DMark vintage GPU score-30996, CPU score 15756(3.4ghz) total P25902 3D Mark 11 score 8728

System Name:	RemDiablo
Processor:	Q9550 2.8 ghz (3.8ghz) C1
Motherboard:	ASUS P5Q PRO TURBO
Cooling:	Corsair H70
Memory:	Kingston HyperX 1100mhz 4GB
Video Card:	EVGA GTX 680 FTW + 4GB
Hard Disk:	SSD 64GB Kingston (boot),WD 1TB 7200 RPM storage
Optical Drive:	Lite On 24x DVD-RW
CRT/LCD Model:	3x Acer 21" monitors
Case:	HAF X Modded
Sound Card:	Corsair H1
PSU:	Corsair 1200W
Software:	WIN 7 Ultimate 64-bit
Benchmarks:	3DMark vintage GPU score-30996, CPU score 15756(3.4ghz) total P25902 3D Mark 11 score 8728

System Name:	RemDiablo
Processor:	Q9550 2.8 ghz (3.8ghz) C1
Motherboard:	ASUS P5Q PRO TURBO
Cooling:	Corsair H70
Memory:	Kingston HyperX 1100mhz 4GB
Video Card:	EVGA GTX 680 FTW + 4GB
Hard Disk:	SSD 64GB Kingston (boot),WD 1TB 7200 RPM storage
Optical Drive:	Lite On 24x DVD-RW
CRT/LCD Model:	3x Acer 21" monitors
Case:	HAF X Modded
Sound Card:	Corsair H1
PSU:	Corsair 1200W
Software:	WIN 7 Ultimate 64-bit
Benchmarks:	3DMark vintage GPU score-30996, CPU score 15756(3.4ghz) total P25902 3D Mark 11 score 8728

System Name:	RemDiablo
Processor:	Q9550 2.8 ghz (3.8ghz) C1
Motherboard:	ASUS P5Q PRO TURBO
Cooling:	Corsair H70
Memory:	Kingston HyperX 1100mhz 4GB
Video Card:	EVGA GTX 680 FTW + 4GB
Hard Disk:	SSD 64GB Kingston (boot),WD 1TB 7200 RPM storage
Optical Drive:	Lite On 24x DVD-RW
CRT/LCD Model:	3x Acer 21" monitors
Case:	HAF X Modded
Sound Card:	Corsair H1
PSU:	Corsair 1200W
Software:	WIN 7 Ultimate 64-bit
Benchmarks:	3DMark vintage GPU score-30996, CPU score 15756(3.4ghz) total P25902 3D Mark 11 score 8728

System Name:	RemDiablo
Processor:	Q9550 2.8 ghz (3.8ghz) C1
Motherboard:	ASUS P5Q PRO TURBO
Cooling:	Corsair H70
Memory:	Kingston HyperX 1100mhz 4GB
Video Card:	EVGA GTX 680 FTW + 4GB
Hard Disk:	SSD 64GB Kingston (boot),WD 1TB 7200 RPM storage
Optical Drive:	Lite On 24x DVD-RW
CRT/LCD Model:	3x Acer 21" monitors
Case:	HAF X Modded
Sound Card:	Corsair H1
PSU:	Corsair 1200W
Software:	WIN 7 Ultimate 64-bit
Benchmarks:	3DMark vintage GPU score-30996, CPU score 15756(3.4ghz) total P25902 3D Mark 11 score 8728

Aug 26, 2010, 08:23 PM	#102
trickson OH, I have such a headache Join Date: Dec 2004 Location: Planet Earth. Posts: 6,154 (1.97/day) Thanks: 1,947 Thanked 922 Times in 757 Posts System Specs	NO re-post . I need the BIOS pics Only them .

Aug 26, 2010, 08:46 PM	#104
trickson OH, I have such a headache Join Date: Dec 2004 Location: Planet Earth. Posts: 6,154 (1.97/day) Thanks: 1,947 Thanked 922 Times in 757 Posts System Specs	I think I see the problem . these MB don't like going over 450MHz FSB . The Mult on your CPU is at 8.5 can you change it to 9.0 ? If not that is another thing these boards don't like very much . changing the voltage at this point is not going to work . you have hit the wall unless you can get that to a X9 Multiplier !

Aug 26, 2010, 08:49 PM	#106
remdiablo Join Date: Aug 2010 Location: Seattle,WA Posts: 85 (0.08/day) Thanks: 65 Thanked 1 Time in 1 Post System Specs	may be I should try x8 multiplier

Aug 26, 2010, 09:44 PM	#110
trickson OH, I have such a headache Join Date: Dec 2004 Location: Planet Earth. Posts: 6,154 (1.97/day) Thanks: 1,947 Thanked 922 Times in 757 Posts System Specs	Cool ! You can take the GTL ref to 0.65x that would be about it . Is it stable ? run prime 95 and see . Not OCCT not just yet .

Aug 26, 2010, 09:48 PM	#112
trickson OH, I have such a headache Join Date: Dec 2004 Location: Planet Earth. Posts: 6,154 (1.97/day) Thanks: 1,947 Thanked 922 Times in 757 Posts System Specs	You can even take the CPU to 1.45 Volts , This may add some stability .

Aug 26, 2010, 09:54 PM	#114
trickson OH, I have such a headache Join Date: Dec 2004 Location: Planet Earth. Posts: 6,154 (1.97/day) Thanks: 1,947 Thanked 922 Times in 757 Posts System Specs	Take the Vcore to 1.45 NOT any higher and the GTL ref to 0.65x . That may do the trick .

Aug 26, 2010, 10:42 PM	#115
remdiablo Join Date: Aug 2010 Location: Seattle,WA Posts: 85 (0.08/day) Thanks: 65 Thanked 1 Time in 1 Post System Specs	Just be sure. Do you use all 8 pin to power your CPU or just 4(i'm using all 8) may be that giving me an overvoltage at 1.45v,it looks like over everything is kind of slow. and prime 95 fail in3 min 43 sec.

Aug 29, 2010, 01:43 PM	#120
newtekie1 Semi-Retired Folder Join Date: Nov 2005 Location: Indiana Posts: 17,904 (6.47/day) Thanks: 785 Thanked 5,185 Times in 3,754 Posts System Specs	I would suggest dropping the multiplier from 8.5 to 6. This will temporarily drop the CPU speed to allow you to run the stress test and see if it is the CPU causing the error, or something else. The RAM running at 943MHz might be too much for it, even with the loose timings, is there an option to run the RAM at a slower speed? __________________ Rig1: System Specs. Rig2: A8-5600K@4.4GHz / AsRock FM2A75 Pro4 / 8GB Corsair DDR3-1600 9-9-9-24 / HD7560D / Samsung DVD-Burner / 1.5TB WD Green + 3x3TB WD RED in RAID5 Rig3: Athlon X2 4200+ / M4A79 Deluxe / 4GB G.Skill Pi DDR2-800 4-4-4-12 / GT430 / Sony DVD-Burner / 500GB WD Rig4: Phenom II x6 1605T @ 3.6GHz / Asus M5A99X Evo / 8GB PNY DDR3-1600 9-9-9 / GTX470 & GTX470 / Samsung DVD-Burner / 1.5TB Seagate

Processor:	Intel Core i7 875K@4.0GHz(200x20)
Motherboard:	eVGA P55 FTW 200
Cooling:	Thermalright Ultra-120 Extreme w/ Corsair SP120 High Performance Edition
Memory:	8GB Corsair DDR3-1600 7-7-7-20
Video Card:	ASUS GTX 670 4GB DirectCU II @ 1015/3600
Hard Disk:	1TB Seagate 7200.12(OS), 3x 1.5TB Seagate 7200.11 in RAID 5
Optical Drive:	Lite-On Blu-Ray Combo Drive IHES108
CRT/LCD Model:	HP 25" 2509m 1080p LCD
Case:	Lian-Li Lancool Metal Boned K7 w/ Windowed Side Panel
Sound Card:	Onboard is good enough for me
PSU:	Corsair HX850
Software:	Windows 7 x64 Professional

Aug 29, 2010, 02:53 PM	#121
mm67 Join Date: Jul 2010 Posts: 118 (0.11/day) Thanks: 1 Thanked 42 Times in 31 Posts System Specs	1:1 FSB : DRAM ratio is the lowest you can get on Intel board, only Nvidia boards allow unlinking of memory and FSB __________________ CPU-Z validation sig pics temporarily blocked

Processor:	i7-2500K @ 4.5 GHz
Motherboard:	Gigabyte GA-Z68XP-UD4
Cooling:	EK Supreme HF
Memory:	Kingston HyperX Genesis 2 * 4 GB
Video Card:	Radeon HD 7950
Hard Disk:	OCZ Agility 3
Case:	Bitfenix Shinobi XL
PSU:	Super Flower SF-700P14XE

Aug 29, 2010, 03:07 PM	#122
NinkobEi Join Date: Nov 2006 Posts: 1,644 (0.69/day) Thanks: 227 Thanked 302 Times in 218 Posts System Specs	78 degrees still seems high to me. maybe you should back down the voltage. its very possible that voltage isnt the issue. +1 to newtekie's suggestion. __________________

System Name:	Apollo
Processor:	e8400 E0 @ 4.07ghz 1.304vc
Motherboard:	Asus p5q-pro
Cooling:	xigmatek s1283
Memory:	Transcend aXeram pc2 8500 4x2gb
Video Card:	HIS Ice-Q Turbo HD 6850
Hard Disk:	640gig wd black, 640 wd, 300gig
Optical Drive:	asus dvdrw
CRT/LCD Model:	22" samsung T220 20,000:1
Sound Card:	Auzentech Prelude > Audiotechnica AD700 and Grado SR225i cans
PSU:	OCZ GameXStream 700W
Software:	Win 8 Pro 64

Aug 30, 2010, 05:23 PM	#125
remdiablo Join Date: Aug 2010 Location: Seattle,WA Posts: 85 (0.08/day) Thanks: 65 Thanked 1 Time in 1 Post System Specs	I think I just have to switch to Asus Rampage III formula and I7 930 .disapointed for now Now i just out of any Idea,what this chip is wants ???

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Not really stable at 4ghz	IINexusII	Overclocking & Cooling	20	May 29, 2010 09:24 PM
Linpack stable but not prime95 stable?	LifeFlayer	Overclocking & Cooling	2	Jul 23, 2009 01:45 AM
Q9550 at 20% cpu usage even in idle	aimbots	Motherboards & Memory	14	Apr 19, 2009 10:09 PM
OC-ing not really worth it?	Flash	AMD / ATI	11	Feb 4, 2009 05:57 PM
New system build turns on but won't boot, not even bios! help	snbase	Motherboards & Memory	12	Sep 21, 2008 03:16 AM