NEW - 3DMark 11 Compilation

[Fitseries3]

me too, seeing how i have 2x the rig most scores have

is there no SLI profile enabled for this yet?

[DOM]

DOM|HD5770|1100/1420|3258|i7 980 3337MHz

[Bjorn_Of_Iceland]

Originally Posted by rickss69

Yep - Knocked off a little cpu and it scores almost the same. I bet if I disabled HT it would make little difference. What a rotten benchmark...

I think its the inevitable path of gaming.. OCing would yield little boon. At least 3 cores and your good. Majority of game apps is gpu bound nowadays.

[Zubasa]

Zubasa|HD 5870|850/1200(stock)|3942|Phenom II X6 1055T@3.5G (4G Turbo)

[Triton.se]

guys...whatever you do, don't run 3DMark Vantage with 3DMark11 installed, coz:

Vantage will show corrupt graphics you might think your cards gone bad (in SLI atleast, was OK with ONE card..dunno about Crossfire) and still does so even after uninstalling both apps, and re-installing Vantage. Changing drivers won't help, but a System Restore ! google this and you'll find many threads, one at futuremark, one evga etc etc

[Bjorn_Of_Iceland]

buggy pos

[Crusader]

Originally Posted by Bjorn_Of_Iceland

buggy pos

I guess that's why they pushed the release back a bit, huh.

[Mussels]

Edit the code in the first post to look like this:
(Quote this post to copy paste it)
SLI/XFIRE

Name	GPU	Clocks	Score	CPU
Mydog	HD5970 + 2x 5870	Post 107	14774	980X @ 4.3ghz
MetalRacer	Asus 5970	960/1290	8699	i7 980x @ 4412MHz
2DividedbyZero	HD5970	900/1200	8273	980X @ 4.33GHz
johnnyfiive	6870 x2	900/1050	7885	i7 950 @ 4.2
bear jesus	6870 crossfire	1000/1100	7061	phenom II 965 @ 4ghz
Helli	GTX465 SLI	825/1650	6881	E5620 @4.3GHz
MoonPig	ATi HD5870 + HD5850	Stock	6792	i5 760 @ 4.0GHz
TotalChaos	5850x2	765/1125	6257	1055T@3.5Ghz

it will allow it to be sorted by clicking on the heading of each category.

It wont work perfectly since everyone is using various spelling and such, but its better than nothing.

[HammerON]

So trying to run this bench with two GTX 470's:



SLI not working (check out Afterburner).

Tried Vantage and it did show both cards working (Afterburner) however as already noted, had some serious problems (tearing):

[EarthDog]

Try with older drivers if you are on the newest HAmmer...

[Mussels]

Mussels|5870 | stock|P4085|AMD Phenom II x6 1090T @ 3.6GHz



i dont feel like i need CPU and GPU-Z screenies for what is essentially stock clocks.

[Mydog]

Originally Posted by Fitseries3

is there no SLI profile enabled for this yet?

Have you tried the Qadro drivers, I know they work for a few with 480 multi sli setup?

They used this one: quadro 265.90

[Rado D]

Originally Posted by Asylum

GTX 480|936/1113

Holly shit!!Is your GTX 480 water cooled??Still those core clocks are insane.I'd get artifacts above my current speeds.I could push the memory clocks in fact I did with 800core,but then I lowered the memory clocks when rasing the core to 835.this way its nice and stable.

[Mydog]

Improved a little on my score

Mydog |MSI 5970@ 1000/1300 + 2x 5870@ 1020/1330 | p14818 | core I7 980X @ 4.3ghz

[CobraXP]

CobraXP |HD 6870 Crossfire|1090/1185|P9021|i7 990x @ 4.8Ghz
http://3dmark.com/3dm11/36365

[Helli]

Originally Posted by Triton.se

guys...whatever you do, don't run 3DMark Vantage with 3DMark11 installed, coz:

Vantage will show corrupt graphics you might think your cards gone bad (in SLI atleast, was OK with ONE card..dunno about Crossfire) and still does so even after uninstalling both apps, and re-installing Vantage. Changing drivers won't help, but a System Restore ! google this and you'll find many threads, one at futuremark, one evga etc etc

I can not confirm this.

I have both Bench installed and both running fine. Only if i install the Quadro Driver 265.90 with .inf-Mod (for SLI) the Vantage Graphics get corrupt.

Helli

[Rado D]

Originally Posted by Triton.se

guys...whatever you do, don't run 3DMark Vantage with 3DMark11 installed, coz:

Vantage will show corrupt graphics you might think your cards gone bad

Is that so?? Can someone comfirm this?? Altough I have both Vantage and 3dMark11 installed and I did not experience any issues so far..

Originally Posted by Helli

I can not confirm this.

I have both Bench installed and both running fine. Only if i install the Quadro Driver 265.90 with .inf-Mod (for SLI) the Vantage Graphics get corrupt.

Helli

EDIT:I wish I was scrolling down first prior to my post There is still a possibility however,that they might be some hidden (even)small issues when having both benchmarks installed..I'll try to uninstall Vantage and run 3dMark11 and will see whats the score

EDIT 2:so I've uninstalled both Vantage and 3dMark11,did all the cleaning and restarted and the results are that instead of original P5806 now I got P5809 so the conclusion ist that it doesnt make difference wether you have both benchmarks installed at the same system...BUT Attention,first I 've tried to uninstall just the Vantage and even that I did the uninstall process of the application via my Revouninstaller PRO and payd extra attention that it wont delete anything of the 3dMark11 files,uninstalling Vantage did cause instability of 3dMark11

[dir_d]

This benchmark hates AMD CPU chips, the scores are so much higher on intel rigs its ridiculous. I dont really think its an accurate description of how well DX11 works, but hey its just me.

I mean compare these two benches...

Mine http://3dmark.com/3dm11/38097
vs
ricksss69 http://3dmark.com/3dm11/43216

My 5870 beats his in everything except the physics, even beat his in the combined but he still pulls out 200 ahead so weird. The physics part just seems inflated to me. I know he has a 1000 dollar CPU compared to my 150 dollar CPU but im just ranting a lil lol. I guess ill go intel for my next rig for the "Best DX11 Experience".

[AthlonX2]

he has 8 more threads than you.I see no room for complaint there

[groothof22]

Originally Posted by AthlonX2

he has 8 more threads than you.I see no room for complaint there

add my score btw page 2 scroll 6^^ down :P

[AthlonX2]

Originally Posted by groothof22

add my score btw

what post is your score.

[groothof22]

Originally Posted by groothof22

groothof22|6870|900|1050|P3792|Q9400@2.66ghz

here is my score

techPowerUp! Forums

here XD

[AthlonX2]

AthlonX2|GTX470|800/1900|5022|Phenom II 965 @ 4Ghz

[groothof22]

nice but Athlonx2 my score stands not good whit the others :P take a look and you will see it

greetzz

[Helli]

Originally Posted by Helli

I can not confirm this.

I have both Bench installed and both running fine. Only if i install the Quadro Driver 265.90 with .inf-Mod (for SLI) the Vantage Graphics get corrupt.

Helli

Aargh...i have to correct myself. I have not carefully read the posting.
With SLI enabled i got Graphic errors also...

Helli