TPU's F@H Team - Page 498

BUCK NASTY · Jan 4, 2011, 02:25 AM

Quote:

Originally Posted by Josh154

Shoot i don't even care at this point

It's not posting though

Im getting some error code. Wouldn't that suck if the RAM was DOA

Clear the CMOS

(FIH) The Don · Jan 4, 2011, 02:31 AM

Quote:

Originally Posted by BUCK NASTY

Clear the CMOS

and try 1 stick only

Josh154 · Jan 4, 2011, 02:35 AM

Got it! Tried removing all the ram but 1 stick, neither of the blue slots it would post, so i put the ram in the white slot, one stick posted, 2 sticks posted, 3 stricks posted! Look's like the white slot's are the ticket. Already cleared CMOS also.

(FIH) The Don · Jan 4, 2011, 02:38 AM

yeah white slots is what you need for 3 sticks according to the manual

incase you didnt get manual with board http://europe.asrock.com/manual/X58%20Extreme.pdf

xbonez · Jan 4, 2011, 02:43 AM

Just tried OC'ing the Q6600. I'm confused at the BIOs. Whats the relation between FSB and clock speed?

Obviously FS x Multiplier does not equal clock speed, because FSB is 1066, multiplier is 9 and clock speed is 2.4Ghz.

Also, further below, why is CPU voltage at 0.0000?

Josh154 · Jan 4, 2011, 02:46 AM

Quote:

Originally Posted by (FIH) The Don

yeah white slots is what you need for 3 sticks according to the manual

incase you didnt get manual with board http://europe.asrock.com/manual/X58%20Extreme.pdf

Thanks bro! Yeah i got the full retail version except for the manual

Im booting into windows right now actually

What happens if i want to add another 6gb kit later with this board? Am i able to put that kit in the blue slots on my mobo and run everything as tri channel?

Josh154 · Jan 4, 2011, 02:46 AM

Quote:

Originally Posted by xbonez

Just tried OC'ing the Q6600. I'm confused at the BIOs. Whats the relation between FSB and clock speed?

Obviously FS x Multiplier does not equal clock speed, because FSB is 1066, multiplier is 9 and clock speed is 2.4Ghz.

Also, further below, why is CPU voltage at 0.0000?

http://dl.dropbox.com/u/1276196/IMAG0178.jpg

Set it to 1600 for a 400mhz fsb and 1333 for 333mhz. 1800 for 450 fsb.

[H]@RD5TUFF · Jan 4, 2011, 02:49 AM

Quote:

Originally Posted by Josh154

Set it to 1600 for a 400mhz fsb and 1333 for 333mhz. 1800 for 450 fsb.

You seem to be having better luck than I, mine seems to only post sporaticly, and then doesn't like to boot into windows.

I have seriously just about had it with Gigabyte.

Josh154 · Jan 4, 2011, 02:50 AM

Quote:

Originally Posted by [H]@RD5TUFF

You seem to be having better luck than I, mine seems to only post sporaticly, and then doesn't like to boot into windows.

I have seriously just about had it with Gigabyte.

That was in response to xbonez question with my old mobo

So far my i7 rig is running great though! Im actually up and booted right now. Ahh the look of 8 cores in task manager! I think my e-peen is definitely erect right now

(FIH) The Don · Jan 4, 2011, 02:51 AM

Quote:

Originally Posted by [H]@RD5TUFF

You seem to be having better luck than I, mine seems to only post sporaticly, and then doesn't like to boot into windows.

I have seriously just about had it with Gigabyte.

are you running same memory on the boards?

what about the chip?

Quote:

Originally Posted by Josh154

Thanks bro! Yeah i got the full retail version except for the manual

Im booting into windows right now actually

What happens if i want to add another 6gb kit later with this board? Am i able to put that kit in the blue slots on my mobo and run everything as tri channel?

yep just put those in the blue slots, its only when using 3 sticks it has to be the white, kinda the same as with Gigabyte Boards

Josh154 · Jan 4, 2011, 02:54 AM

Quote:

Originally Posted by (FIH) The Don

yep just put those in the blue slots, its only when using 3 sticks it has to be the white, kinda the same as with Gigabyte Boards

Ahh show's my noobness to 1366

[H]@RD5TUFF · Jan 4, 2011, 02:55 AM

Quote:

Originally Posted by (FIH) The Don

are you running same memory on the boards?

what about the chip?

Memory and the chip are the same from the last setup some of the parts were recycled from, and they were both 24/7 stable, it also doesn't explain the sporadic POST.

thebluebumblebee · Jan 4, 2011, 03:00 AM

Quote:

Originally Posted by [H]@RD5TUFF

Memory and the chip are the same from the last setup some of the parts were recycled from, and they were both 24/7 stable, it also doesn't explain the sporadic POST.

move the ram to the outside bank.

Josh154 · Jan 4, 2011, 03:07 AM

Holy shit guys! Check this out! Look at that vcore

Completely stable also. I think im gonna have a great clocking chip. Knock on wood

[H]@RD5TUFF · Jan 4, 2011, 03:08 AM

Quote:

Originally Posted by thebluebumblebee

move the ram to the outside bank.

Trying that now.

Josh154 · Jan 4, 2011, 03:28 AM

Anybody have some good guides to oc'ing 1366 chips? I basically wanna hit 4.0. Cooling should be good also. Ran IBT and maxed at 58C so i have some head room

[H]@RD5TUFF · Jan 4, 2011, 03:28 AM

Quote:

Originally Posted by [H]@RD5TUFF

Trying that now.

Seems to boot into windows okay now, but still POST's randomly, my only geuss is when I restart Windows it doesn't shutdown properly, perhaps windows is corrupted.

Josh154 · Jan 4, 2011, 03:29 AM

Quote:

Originally Posted by [H]@RD5TUFF

Seems to boot into windows okay now, but still POST's randomly, my only geuss is when I restart Windows it doesn't shutdown properly, perhaps windows is corrupted.

Well then, try a fresh isntall?

[H]@RD5TUFF · Jan 4, 2011, 03:41 AM

Quote:

Originally Posted by Josh154

Well then, try a fresh isntall?

I'm going I was procrastinating, oh well I need to upgrade from Vista to Windows 7 on this harddrive anyway.

But I am going to let it do all it's backingupystuffz thingy, sinc ebecause this machine has been down a week a some of my media is not backed up ATM.

bogmali · Jan 4, 2011, 03:44 AM

Quote:

Originally Posted by Josh154

Anybody have some good guides to oc'ing 1366 chips? I basically wanna hit 4.0. Cooling should be good also. Ran IBT and maxed at 58C so i have some head room

IIRC with that board, you have some OC settings pre-loaded in the BIOS so start with that and tweak your settings once you get a stable run. I suggest you start at 3.6Ghz and work your way up

xbonez · Jan 4, 2011, 03:48 AM

Quote:

Originally Posted by Josh154

Anybody have some good guides to oc'ing 1366 chips? I basically wanna hit 4.0. Cooling should be good also. Ran IBT and maxed at 58C so i have some head room

This is an excellent guide to OC'ing the 920. Explains what to do and the mechanisms behind everything.

http://www.xbitlabs.com/articles/cpu...rclocking.html

Josh154 · Jan 4, 2011, 03:51 AM

Quote:

Originally Posted by xbonez

This is an excellent guide to OC'ing the 920. Explains what to do and the mechanisms behind everything.

http://www.xbitlabs.com/articles/cpu...rclocking.html

Thanks man! Ill start working on that now. Does my vcore look good at stock?

Also did you manage to figure out your BIOS settings from my post?

[H]@RD5TUFF · Jan 4, 2011, 03:55 AM

All working ATM will re-install Windows tommarow.

xbonez · Jan 4, 2011, 04:14 AM

Quote:

Originally Posted by Josh154

Thanks man! Ill start working on that now. Does my vcore look good at stock?

Also did you manage to figure out your BIOS settings from my post?

I'm still confused about the voltage showing as 0.00000.

Josh154 · Jan 4, 2011, 04:58 AM

Quote:

Originally Posted by xbonez

I'm still confused about the voltage showing as 0.00000.

yeah i was confused on that also. Basically 0.00000 is your VID. +.250 is added that much voltage. I think for 3.6 i had to add +2.75V to be completely stable while folding at 3.6. I could use less voltage in any other task but then with folding i had to add more. Also i noticed that the NB and VTT FSB voltage needed alot. I just maxed those out as temps were fine on the board but i also had a 40mm fan mounted on the NB.

That board needs quite a bit of voltage for OC's but as long as temps are good it's fine.

Just got done doing some p90x and i need to play some black op's! I've been dying to play the game and now that my rig is finished, i need to play a couple rounds of zombies quick. Ill try OC'ing a little later or may just try tomorrow. I'll see how tired i am later

It feels good to be on a good rig again! Im just hoping my PSU will handle everything. I have loaded the cpu 100% but not either graphics card and the CPU yet.

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

Jan 4, 2011, 02:35 AM	#12428
Josh154 Join Date: Nov 2010 Location: Hartford SD Posts: 1,041 (1.09/day) Thanks: 488 Thanked 325 Times in 218 Posts System Specs	Got it! Tried removing all the ram but 1 stick, neither of the blue slots it would post, so i put the ram in the white slot, one stick posted, 2 sticks posted, 3 stricks posted! Look's like the white slot's are the ticket. Already cleared CMOS also. __________________ Heatware eBay feedback

System Name:	24/7 folder
Processor:	Intel core i7 920 D0 @ 4.0 1.216v
Motherboard:	ASRock X58 Extreme
Cooling:	Corsair H50
Memory:	G.SKILL 6gb 1600Mhz
Video Card:	2x evga 8800GTS 512mb SLI
Hard Disk:	WD Caviar Blue 320gb
Optical Drive:	LG DVD burner
CRT/LCD Model:	Vizo 32"1080p
Case:	NZXT Lexa S
Sound Card:	Onboard
PSU:	PC Power&Cooling Silencer 750w
Software:	Windows 7 home premium 64-bit

Jan 4, 2011, 02:38 AM	#12429
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,407 (3.84/day) Thanks: 3,101 Thanked 2,970 Times in 1,835 Posts System Specs	yeah white slots is what you need for 3 sticks according to the manual incase you didnt get manual with board http://europe.asrock.com/manual/X58%20Extreme.pdf __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Jan 4, 2011, 02:43 AM	#12430
xbonez Join Date: Nov 2010 Location: Philly, PA (US) Posts: 1,084 (1.16/day) Thanks: 277 Thanked 323 Times in 197 Posts System Specs	Just tried OC'ing the Q6600. I'm confused at the BIOs. Whats the relation between FSB and clock speed? Obviously FS x Multiplier does not equal clock speed, because FSB is 1066, multiplier is 9 and clock speed is 2.4Ghz. Also, further below, why is CPU voltage at 0.0000? __________________ My Screen Capture Utility Sandy Bridge Worklog

System Name:	Winter
Processor:	AMD Phenom II x4 965 BE @ 4.0Ghz
Motherboard:	MSI 790FX-GD70
Cooling:	Corsair H50 Liquid Cooling
Memory:	2 x 2Gb Gskill Ripjaws 1600Mhz (7-7-7-24@1.6V)
Video Card:	Asus GTX 470 @ Stock (Zalman VF3000 cooler)
Hard Disk:	2 x Samsung Spinpoint F3 500GB (RAID 0)
Optical Drive:	Lite-On Blu-Ray/DVD/CD
CRT/LCD Model:	Hanns G 28" @ 1920x1200
Case:	Antec 1200
Sound Card:	Onboard -- TosLink --> Z5500
PSU:	Corsair 850TX 850W PSU
Software:	Win 7 64-bit Ultimate

System Name:	White Boy
Processor:	Core i7 3770k @4.6 Ghz
Motherboard:	ASUS P8Z77-I Deluxe
Cooling:	CORSAIR H100
Memory:	CORSAIR Vengeance 16GB @ 2177
Video Card:	EVGA GTX 680 CLASSIEFIED @ 1250 Core
Hard Disk:	2 Samsung 830 256 GB (Raid 0) 1 Hitachi 4 TB
Optical Drive:	none
CRT/LCD Model:	1 Dell 30U11 30"
Case:	BIT FENIX Prodigy
Sound Card:	none
PSU:	SeaSonic X750 Gold 750W Modular
Software:	Windows Pro 7 64 bit \|\| Ubuntu 64 Bit
Benchmarks:	2017 Unigine Heaven :: P37239 3D Mark Vantage

System Name:	Current/NEW!
Processor:	AMD Athlon 64 X2-4400+/i7-2600K
Motherboard:	Gigabyte GA-K8NS Ultra-939/GA-P67A-UD4-B3
Cooling:	OCZ Vendetta/H80
Memory:	2GB DDR-400/8GB Corsair DDR3 1600
Video Card:	RADEON 9800 PRO AGP/2x GB GTX 560 Ti
Hard Disk:	Seagate 160GB IDE/120GB Samsung 830 & Seagate 2TB
Optical Drive:	LITE-ON DVDRW LH-20A1L/Pioneer DVR-219LBK
CRT/LCD Model:	Samsung SyncMaster B1940/Asus 24' LED
Case:	Ever Case E4252WSF-F/Antec P280 It's huge!
Sound Card:	SB Audigy 2 ZS/on board
PSU:	Corsair VX550/SeaSonic S12II 620
Software:	XP MCE SP3/Win 7 Home Premiun 64 Bit
Benchmarks:	Are you kidding?/3DMark11 basic P8681

Jan 4, 2011, 03:07 AM	#12439
Josh154 Join Date: Nov 2010 Location: Hartford SD Posts: 1,041 (1.09/day) Thanks: 488 Thanked 325 Times in 218 Posts System Specs	Holy shit guys! Check this out! Look at that vcore Completely stable also. I think im gonna have a great clocking chip. Knock on wood __________________ Heatware eBay feedback

Jan 4, 2011, 03:28 AM	#12441
Josh154 Join Date: Nov 2010 Location: Hartford SD Posts: 1,041 (1.09/day) Thanks: 488 Thanked 325 Times in 218 Posts System Specs	Anybody have some good guides to oc'ing 1366 chips? I basically wanna hit 4.0. Cooling should be good also. Ran IBT and maxed at 58C so i have some head room __________________ Heatware eBay feedback

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

Jan 4, 2011, 03:55 AM	#12448
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.25/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	All working ATM will re-install Windows tommarow. __________________ Stuff 4 Sale! Heat Ware ebay

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)