TPU's F@H Team - Page 531

xbonez · Jan 19, 2011, 09:47 PM

Whoa! My 2600K is working on a 2692WU. I'm getting 40K PPD, with a TPF of 29:05.

Josh154 · Jan 19, 2011, 09:51 PM

Quote:

Originally Posted by [H]@RD5TUFF

Well that's up to you, if you use paste I recommend using a non conductive ceramic paste, but I would not reuse those pads.

Quote:

Originally Posted by theonedub

I would take an Xacto knife or any razor and cut off the squished part of those thermal pads (with them still on the sink). You can easily see where the memory is going to be by the depressions. The gap between the sink and the memory might be too wide for paste to fill without going everywhere.

New pads would be great, but you probably have to order them online. Plus the only parts that look awful dont even tough the mem and will be gone after you cut.

Definitely clean that thing out though, its nasty

I just got it all cleaned up. I managed to find something purty underneath that ugly evga sticker! Pics will come later

Anyways, i took the pads off the RAM, which is the 8 large ones correct? I left the other 3 pads on everything else. Should this be okay? I figured past would be easy to put on the ram sinks.

TeXBill · Jan 19, 2011, 10:03 PM

WOW, defiantly clean that cooler. I haven't seen one that dirty in awhile. I bet your temps will drop 20C after you clean it. You can reuse those pads like Dub said but the parts you cut off can be used to replace the ones you take off. Clean that cooler for sure.

Edit use the pads for your memory chips a lot of times the space between the cooler and the memory chips is bigger and the paste will not let the chips touch the cooler.

Josh154 · Jan 19, 2011, 10:06 PM

Quote:

Originally Posted by xbonez

Whoa! My 2600K is working on a 2692WU. I'm getting 40K PPD, with a TPF of 29:05.

Your making me want to do -bigadv again! If i pause it for lets say 3 hours a day will i still make my dead lines?

Quote:

Originally Posted by TeXBill

WOW, defiantly clean that cooler. I haven't seen one that dirty in awhile. I bet your temps will drop 20C after you clean it. You can reuse those pads like Dub said but the parts you cut off can be used to replace the ones you take off. Clean that cooler for sure.

That would be amazing! Yeah, it was so terrible i couldn't believe it. If those goes well i'll probably do this to the second card as well!

I love these cards, there great and perform amazing for the prices. They also put out about 12-13k for 100 bucks. Can't beat that if you have the slots!

TeXBill · Jan 19, 2011, 10:09 PM

You can pause if the dead line is say several days. Keep an eye on your deadline or else you will not get bonus points.

Josh154 · Jan 19, 2011, 10:23 PM

Quote:

Originally Posted by TeXBill

You can pause if the dead line is say several days. Keep an eye on your deadline or else you will not get bonus points.

Ahh okay cool! 4 mem's down and the gpu is done. 4 more to go till test time and see if all went good!

Josh154 · Jan 19, 2011, 11:46 PM

Finished card! Before folding at these clocks i had fan at 100% fan speed and temps were about 72°C. Now i just ran furmark for about 30 mins, and at the same clocks, 70% fan speed max temp was 65°C. What a difference AND 30% fan speed! Should i do the same with the other card now?

Gonna get the clients up and running now. Had the whole pc off while working on the card.

xbonez · Jan 19, 2011, 11:55 PM

woot! Broke 100K for the day.

Josh154 · Jan 20, 2011, 12:00 AM

Quote:

Originally Posted by xbonez

woot! Broke 100K for the day.

Congrats man! I can't wait till the day i do that all on my own!

Folding at these clocks and 70% fan speed im at about 59C

Much lower, me likey!

xbonez · Jan 20, 2011, 12:01 AM

I just had to turn the 470 on my folding rig down to 725Mhz from 750, coz my roommate is bitching about the heat....sigh

Josh154 · Jan 20, 2011, 12:07 AM

Quote:

Originally Posted by xbonez

I just had to turn the 470 on my folding rig down to 725Mhz from 750, coz my roommate is bitching about the heat....sigh

Dang that sucks

Is there a window you can open with a box fan exhausting the heat or something?

BUCK NASTY · Jan 20, 2011, 12:08 AM

Quote:

Originally Posted by Josh154

http://i112.photobucket.com/albums/n...cket_9788_.jpg

Finished card! Before folding at these clocks i had fan at 100% fan speed and temps were about 72°C. Now i just ran furmark for about 30 mins, and at the same clocks, 70% fan speed max temp was 65°C. What a difference AND 30% fan speed! Should i do the same with the other card now?

Gonna get the clients up and running now. Had the whole pc off while working on the card.

Yep, crack the other one open as well. Chances are it's just as clogged. I tear every card down once a year for maintenance.

xbonez · Jan 20, 2011, 12:08 AM

Quote:

Originally Posted by Josh154

Dang that sucks

Is there a window you can open with a box fan exhausting the heat or something?

Nope, no window by my system

BUCK NASTY · Jan 20, 2011, 12:12 AM

Quote:

Originally Posted by xbonez

I just had to turn the 470 on my folding rig down to 725Mhz from 750, coz my roommate is bitching about the heat....sigh

Tell him to man up..... or else. Seriously, open a window if the heat is too much(that's what i do)

Josh154 · Jan 20, 2011, 12:35 AM

Quote:

Originally Posted by BUCK NASTY

Yep, crack the other one open as well. Chances are it's just as clogged. I tear every card down once a year for maintenance.

This card is cracked open as well. Wasn't quite as bad, but it will definitely be a improvement cleaning it out! I need to start doing this, and cleaning my rad much more.

Also why is my smp client only getting 7.5k ppd? It's 13% complete on a project 6069 but it says im only getting 7.5k ppd? Is smp that big of a hit? I am using all 8 threads and im at 4.0ghz.

[Ion] · Jan 20, 2011, 12:48 AM

That's low, it should be getting ~10k IIRC

PVTCaboose1337 · Jan 20, 2011, 12:48 AM

Quote:

Originally Posted by Josh154

This card is cracked open as well. Wasn't quite as bad, but it will definitely be a improvement cleaning it out! I need to start doing this, and cleaning my rad much more.

Also why is my smp client only getting 7.5k ppd? It's 13% complete on a project 6069 but it says im only getting 7.5k ppd? Is smp that big of a hit? I am using all 8 threads and im at 4.0ghz.

Dedicate one thread away from SMP so it can control your graphics.

Josh154 · Jan 20, 2011, 12:57 AM

Quote:

Originally Posted by [Ion]

That's low, it should be getting ~10k IIRC

Yeah, it's up to about 9.7k PPD now. Is that really all a 920 should get at 4.0?

Quote:

Originally Posted by PVTCaboose1337

Dedicate one thread away from SMP so it can control your graphics.

I've ran -bigadv fine with all 8 threads with 2 gpu 2 clients. Im only running 1 gpu client at the moment as im working on my second gpu.

I can try it though. Also remember im only running gpu2 clients which aren't as cpu intensive as gpu3 clients.

[H]@RD5TUFF · Jan 20, 2011, 12:59 AM

Quote:

Originally Posted by xbonez

I just had to turn the 470 on my folding rig down to 725Mhz from 750, coz my roommate is bitching about the heat....sigh

Tell him to open a window or find a new place to live . . . problem solved!

johnspack · Jan 20, 2011, 02:16 AM

I love TPU! Keep folding all. Sorry, a bit buzzed, but dam I love you guys!

hertz9753 · Jan 20, 2011, 02:25 AM

Quote:

Originally Posted by johnspack

I love TPU! Keep folding all. Sorry, a bit buzzed, but dam I love you guys!

I just sold him a q9450, a 750i mb and a GTX 260. That might explain some things.

Josh154 · Jan 20, 2011, 02:38 AM

Got both cards finished and installed. 2nd card turned out much nicer as well

Temps are below 70° on both cards now with fan speeds at 70% and less

Here's a pic of the second card. I love the nvidia tiger claw! Look's much better than that ugly EVGA sticker that was on there.

Also, im gonna need a new NB fan. Mine managed to fall and break a blade and now theres 4 blades left

Idk, if i should fold or not on it right now as this thing gets so stinkin hot without a fan and i don't need to fry my board as this is my only rig.

johnspack · Jan 20, 2011, 03:00 AM

heheh!!!!

xbonez · Jan 20, 2011, 03:00 AM

Oh, wow....not a good day today. The guy I sold the i7 920 / EVGA x58 combo to just PM'ed me saying the motherboard is in a terrible condition and there's a smoking smell coming from it.
Up until ten min before I shipped it to him, I had it folding for me. I don't know what happened. Possibly some charge left on the capacitors (it was in anti-static though)? Maybe an OC'ing attempt gone wrong by him?

Anyways, I told him to ship it back to me and I'll refund him for the motherboard.

Newegg sell the same motherboard recertified for 80 bucks after MIR, so at most, thats the amount I'll have to refund him.

johnspack · Jan 20, 2011, 03:04 AM

Wonder what 2xgtx285s + 3xgtx260s + 1 9800gtx will produce in ppd? And yes, I found out my supposedly dead 260 is still functional. Plus I may try to fold the 9450... homer droolllllll

Jan 19, 2011, 09:47 PM	#13251
xbonez Join Date: Nov 2010 Location: Philly, PA (US) Posts: 1,084 (1.20/day) Thanks: 277 Thanked 323 Times in 197 Posts System Specs	Whoa! My 2600K is working on a 2692WU. I'm getting 40K PPD, with a TPF of 29:05. __________________ My Screen Capture Utility Sandy Bridge Worklog

System Name:	Winter
Processor:	AMD Phenom II x4 965 BE @ 4.0Ghz
Motherboard:	MSI 790FX-GD70
Cooling:	Corsair H50 Liquid Cooling
Memory:	2 x 2Gb Gskill Ripjaws 1600Mhz (7-7-7-24@1.6V)
Video Card:	Asus GTX 470 @ Stock (Zalman VF3000 cooler)
Hard Disk:	2 x Samsung Spinpoint F3 500GB (RAID 0)
Optical Drive:	Lite-On Blu-Ray/DVD/CD
CRT/LCD Model:	Hanns G 28" @ 1920x1200
Case:	Antec 1200
Sound Card:	Onboard -- TosLink --> Z5500
PSU:	Corsair 850TX 850W PSU
Software:	Win 7 64-bit Ultimate

System Name:	24/7 folder
Processor:	Intel core i7 920 D0 @ 4.0 1.216v
Motherboard:	ASRock X58 Extreme
Cooling:	Corsair H50
Memory:	G.SKILL 6gb 1600Mhz
Video Card:	2x evga 8800GTS 512mb SLI
Hard Disk:	WD Caviar Blue 320gb
Optical Drive:	LG DVD burner
CRT/LCD Model:	Vizo 32"1080p
Case:	NZXT Lexa S
Sound Card:	Onboard
PSU:	PC Power&Cooling Silencer 750w
Software:	Windows 7 home premium 64-bit

Jan 19, 2011, 10:03 PM	#13253
TeXBill Join Date: Oct 2009 Location: TX Posts: 1,348 (1.04/day) Thanks: 1,431 Thanked 643 Times in 431 Posts System Specs	WOW, defiantly clean that cooler. I haven't seen one that dirty in awhile. I bet your temps will drop 20C after you clean it. You can reuse those pads like Dub said but the parts you cut off can be used to replace the ones you take off. Clean that cooler for sure. Edit use the pads for your memory chips a lot of times the space between the cooler and the memory chips is bigger and the paste will not let the chips touch the cooler. __________________ heatware:[http://www.heatware.com/eval.php?id=69231]

System Name:	Beast, little beast
Processor:	Core i7 2600K 4.5GHZ 24/7, Core i7 Xeon6 core 3.6GHZ 24/7
Motherboard:	Gigabyte Z68X-UD4-B3 1155Sckt, EVGA X58 sckt 1366
Cooling:	H80, H100
Memory:	24 gigs DDR3 1600Mhz Gskill RipJaws,12 gigs DDR3 1600Mhz Gskill Ripjaws
Video Card:	1 Nvidia 670 eVGA FTW, 1 Nvidia 580 eVGA
Hard Disk:	1- WD Black 640GB, 1X Samsung 1.5TB, 2 X 160 WD Veloc Raptors Raided
Optical Drive:	2 X Asus DVD/RW, LG DVDRW
CRT/LCD Model:	Hanns-G 28" 1920X1200, Acer 24" 1920X1200
Case:	rig#1 Dismatech test bench, rig#2 Made By Bill Tech Bench
Sound Card:	onboard
PSU:	Antec 1000 Watt, PC power&cooling 850 watt
Software:	both Rig's, Win7 64Bit
Benchmarks:	rig #1 4.8GHZ @ 1.375 Volts. running 4.5GHZ 1.272 Volts 24/7. Rig #2 4.6GHZ @ 1.3 Volts 24/7.

Jan 19, 2011, 10:09 PM	#13255
TeXBill Join Date: Oct 2009 Location: TX Posts: 1,348 (1.04/day) Thanks: 1,431 Thanked 643 Times in 431 Posts System Specs	You can pause if the dead line is say several days. Keep an eye on your deadline or else you will not get bonus points. __________________ heatware:[http://www.heatware.com/eval.php?id=69231]

Jan 19, 2011, 11:46 PM	#13257
Josh154 Join Date: Nov 2010 Location: Hartford SD Posts: 1,041 (1.12/day) Thanks: 488 Thanked 325 Times in 218 Posts System Specs	Finished card! Before folding at these clocks i had fan at 100% fan speed and temps were about 72°C. Now i just ran furmark for about 30 mins, and at the same clocks, 70% fan speed max temp was 65°C. What a difference AND 30% fan speed! Should i do the same with the other card now? Gonna get the clients up and running now. Had the whole pc off while working on the card. __________________ Heatware eBay feedback

Jan 19, 2011, 11:55 PM	#13258
xbonez Join Date: Nov 2010 Location: Philly, PA (US) Posts: 1,084 (1.20/day) Thanks: 277 Thanked 323 Times in 197 Posts System Specs	woot! Broke 100K for the day. __________________ My Screen Capture Utility Sandy Bridge Worklog

Jan 20, 2011, 12:01 AM	#13260
xbonez Join Date: Nov 2010 Location: Philly, PA (US) Posts: 1,084 (1.20/day) Thanks: 277 Thanked 323 Times in 197 Posts System Specs	I just had to turn the 470 on my folding rig down to 725Mhz from 750, coz my roommate is bitching about the heat....sigh __________________ My Screen Capture Utility Sandy Bridge Worklog

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

Jan 20, 2011, 12:48 AM	#13266
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,662 (7.93/day) Thanks: 8,247 Thanked 9,324 Times in 4,260 Posts System Specs	That's low, it should be getting ~10k IIRC __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

System Name:	Whim
Processor:	Intel Core i5 2500k @ 4.4ghz
Motherboard:	Gigabyte P67A-D3-B3
Cooling:	Cooler Master Hyper 212+
Memory:	2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card:	Gigabyte GTX 670 2gb
Hard Disk:	WD 640gb Black (Main), WD 2tb Black (Secondary)
Optical Drive:	LG DVD-RW Drive
CRT/LCD Model:	Asus VE228 and Samsung 2053BW
Case:	Cooler Master 430 Elite
Sound Card:	Onboard > PA2V2 Amp > Senn 595's
PSU:	Seasonic 650w
Software:	Windows 7 Ultimate (Tweaked)

System Name:	White Boy
Processor:	Core i7 3770k @4.6 Ghz
Motherboard:	ASUS P8Z77-I Deluxe
Cooling:	CORSAIR H100
Memory:	CORSAIR Vengeance 16GB @ 2177
Video Card:	EVGA GTX 680 CLASSIEFIED @ 1250 Core
Hard Disk:	2 Samsung 830 256 GB (Raid 0) 1 Hitachi 4 TB
Optical Drive:	none
CRT/LCD Model:	1 Dell 30U11 30"
Case:	BIT FENIX Prodigy
Sound Card:	none
PSU:	SeaSonic X750 Gold 750W Modular
Software:	Windows Pro 7 64 bit \|\| Ubuntu 64 Bit
Benchmarks:	2017 Unigine Heaven :: P37239 3D Mark Vantage

Jan 20, 2011, 02:16 AM	#13270
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	I love TPU! Keep folding all. Sorry, a bit buzzed, but dam I love you guys! __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

System Name:	Blacknet
Processor:	i7 950@ 4.1GHz
Motherboard:	Asus Rampage II Gene
Cooling:	Noctua NH-D14, 8 case fans
Memory:	24GB gskill ripjaws@ 1800mhz
Video Card:	Evga GTX480 + GTX260 Physx + TrackIR 5
Hard Disk:	WD Black 1TB 64mb cache + Spinpoint F1 750g backup + 2TB Seagate backup + 320GB Seagate backup
Optical Drive:	LG BH12LS38 Blu Ray burner
CRT/LCD Model:	Syncmaster 2443BW 1920x1200 Lcd + 19" ViewSonic Lcd
Case:	Antec 1200
Sound Card:	Onboard
PSU:	Silverstone 850Watt Strider+ Modular
Software:	Win7 x64 SP1 Ultimate
Benchmarks:	Time to upgrade to 680s....

System Name:	Fuzzy Bunny
Processor:	AMD Phenom II X4 980
Motherboard:	Foxconn Destroyer
Cooling:	Corsair H50
Memory:	OCZ Reaper HPC 4GB (2 x 2GB)
Video Card:	Nvidia GTX 570
Hard Disk:	Western Digital Caviar Black WD7501AALS 750GB
Optical Drive:	Sony
CRT/LCD Model:	ASUS VW222U 22"
Case:	Antec 300
Sound Card:	Stock
PSU:	CoolerMaster Gold 1000 Watt
Software:	Windows 7 64

Jan 20, 2011, 02:38 AM	#13272
Josh154 Join Date: Nov 2010 Location: Hartford SD Posts: 1,041 (1.12/day) Thanks: 488 Thanked 325 Times in 218 Posts System Specs	Got both cards finished and installed. 2nd card turned out much nicer as well Temps are below 70° on both cards now with fan speeds at 70% and less Here's a pic of the second card. I love the nvidia tiger claw! Look's much better than that ugly EVGA sticker that was on there. Also, im gonna need a new NB fan. Mine managed to fall and break a blade and now theres 4 blades left Idk, if i should fold or not on it right now as this thing gets so stinkin hot without a fan and i don't need to fry my board as this is my only rig. __________________ Heatware eBay feedback

Jan 20, 2011, 03:00 AM	#13273
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	heheh!!!! __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Jan 20, 2011, 03:00 AM	#13274
xbonez Join Date: Nov 2010 Location: Philly, PA (US) Posts: 1,084 (1.20/day) Thanks: 277 Thanked 323 Times in 197 Posts System Specs	Oh, wow....not a good day today. The guy I sold the i7 920 / EVGA x58 combo to just PM'ed me saying the motherboard is in a terrible condition and there's a smoking smell coming from it. Up until ten min before I shipped it to him, I had it folding for me. I don't know what happened. Possibly some charge left on the capacitors (it was in anti-static though)? Maybe an OC'ing attempt gone wrong by him? Anyways, I told him to ship it back to me and I'll refund him for the motherboard. Newegg sell the same motherboard recertified for 80 bucks after MIR, so at most, thats the amount I'll have to refund him. __________________ My Screen Capture Utility Sandy Bridge Worklog

Jan 20, 2011, 03:04 AM	#13275
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Wonder what 2xgtx285s + 3xgtx260s + 1 9800gtx will produce in ppd? And yes, I found out my supposedly dead 260 is still functional. Plus I may try to fold the 9450... homer droolllllll __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Currently Active Users Viewing This Thread: 4 (2 members and 2 guests)
msgclb, thebluebumblebee