The AMD Phenom II OC'ers Club - Page 474

Chicken Patty · Mar 5, 2011, 11:22 PM

Can you get it over 4GHz?

Corduroy_Jr · Mar 5, 2011, 11:25 PM

oh hell yea i was at 4.2ghz last night 1.4750v stable for 2 hrs and something i bet i could even run a lower vcore, go back a page i posted my results chicken

cdawall · Mar 6, 2011, 12:10 AM

Quote:

Originally Posted by Corduroy_Jr

oh hell yea i was at 4.2ghz last night 1.4750v stable for 2 hrs and something i bet i could even run a lower vcore, go back a page i posted my results chicken

hit over 4.5ghz and i will be impressed infared on XS's has gone that far on air

Corduroy_Jr · Mar 6, 2011, 12:46 AM

4.4ghz nor 4.5ghz wont go, has o be the board or max of cpu, ill find out when i make it a dual core 4.5ghz if the same results the then i will know if its the board or cpu

Corduroy_Jr · Mar 6, 2011, 12:46 AM

working on 4.3ghz as we speak as a quad core 1.5250v

Corduroy_Jr · Mar 6, 2011, 01:27 AM

this does not seem right 22c as a dual core 4500mhz idle

erocker · Mar 6, 2011, 02:04 AM

Quote:

Originally Posted by Corduroy_Jr

this does not seem right 22c as a dual core 4500mhz idle

It's impossible unless you are really cold in your room right now. Add 10-12c at least.

cdawall · Mar 6, 2011, 02:33 AM

Quote:

Originally Posted by erocker

It's impossible unless you are really cold in your room right now. Add 10-12c at least.

10-12C until you hit 50C then it is closer to correct 62C is exactly correct on them per AMD

claylomax · Mar 6, 2011, 02:44 AM

I finally got over 3.9GHz stable, 3.984MHz exactly, leaving the multiplier on auto. Not bad after trying for 9 months.

Corduroy_Jr · Mar 7, 2011, 01:44 AM

i only had this phenom II 555 for a few days 4.2ghz x4 24/7

Velvet Wafer · Mar 7, 2011, 02:55 AM

Quote:

Originally Posted by Corduroy_Jr

i only had this phenom II 555 for a few days 4.2ghz x4 24/7

Must relatively golden, as till today, i only was able to validate that on my 955... and that after months of tweaking, on a Killer loop

cdawall · Mar 7, 2011, 03:35 AM

Quote:

Originally Posted by Velvet Wafer

Must relatively golden, as till today, i only was able to validate that on my 955... and that after months of tweaking, on a Killer loop

Huge difference between you c2 chip and his c3 chip. Mine on a killer loop did about the same as yours but with 4.1 stable. Downside the these new c3 chips is the imc cannot hold a candle to yours the old c2 chips and first few batches of c3 could handle way higher volts than these new ones.

Velvet Wafer · Mar 7, 2011, 05:22 AM

Quote:

Originally Posted by cdawall

Huge difference between you c2 chip and his c3 chip. Mine on a killer loop did about the same as yours but with 4.1 stable. Downside the these new c3 chips is the imc cannot hold a candle to yours the old c2 chips and first few batches of c3 could handle way higher volts than these new ones.

indeed, as i have one of the VERY early batches, as you once stated...a CACYC 0915 APMW,a batch known to be a good OCer,for a C2 955, from my knowledge, when your own 955,which was an ES was of batch 0918 APMW, and as such, younger than my Retail proc

Thanks for clearing that up,cda!

AthlonX2 · Mar 15, 2011, 05:50 AM

Where the hell did all the AMd OC'ers go? Was playing with the 1090T this evening and this is where im at so far

crunchie · Mar 15, 2011, 10:02 AM

Just a little more

.

http://valid.canardpc.com/show_oc.php?id=1305086

de.das.dude · Mar 15, 2011, 12:18 PM

dude.... you have a NB cooler right??

or it'll fry man... 3GHz!!!

crunchie · Mar 15, 2011, 12:29 PM

Probably not 24/7 frequencies

. Mine aren't.

JrRacinFan · Mar 15, 2011, 12:33 PM

Quote:

Originally Posted by de.das.dude

dude.... you have a NB cooler right??

or it'll fry man... 3GHz!!!

No offense, but what the heck are you talking about? AthlonX2's 3Ghz NB setting is perfectly fine. What you are seeing is the IMC's frequency that's on the chip. It can be clocked the same way as the actual cores, it only adds about a few degrees to the chip's temps itself. It's worth clocking it that high.

HUSKIE · Mar 15, 2011, 12:38 PM

I'm in I'm in.....

Mussels · Mar 15, 2011, 12:50 PM

what settings need to be changed to OC the NB? mines only at 2GHz, so i'd like to know some reccomended settings to get it higher (2.4-2.6 would be fine)

i have the same board as crunchie, so his input would be appreciated

JrRacinFan · Mar 15, 2011, 12:53 PM

Quote:

Originally Posted by Mussels

what settings need to be changed to OC the NB? mines only at 2GHz, so i'd like to know some reccomended settings to get it higher (2.4-2.6 would be fine)

i have the same board as crunchie, so his input would be appreciated

CPU NB Frequency should have an unlocked multiplier. Can up that a few notches and don't go past 1.45v in CPU NB VID.

Mussels · Mar 15, 2011, 01:00 PM

Quote:

Originally Posted by JrRacinFan

CPU NB Frequency should have an unlocked multiplier. Can up that a few notches and don't go past 1.45v in CPU NB VID.

what voltage range is normal, say for 2.6?

JrRacinFan · Mar 15, 2011, 01:10 PM

Quote:

Originally Posted by Mussels

what voltage range is normal, say for 2.6?

On a thuban chip I'd think about 1.3-1.35v. One of those things that "every chip is different" applies here.

Mussels · Mar 15, 2011, 01:16 PM

i tried 1.30v... some impressive boosts to memory speed at 2.6Ghz NB, compared to stock 2Ghz.

if my math holds true, the L1 read is 18% faster now, after a 30% increase in NB clocks. nice improvements, now to test stability.

JrRacinFan · Mar 15, 2011, 01:19 PM

Might be able to get 2.8, my lil C3 does 2.6 no sweat, try for 3.8Ghz clock speed also. A good way to figure out if your bottlenecked by NB is look at your Memory and L3 cache reads, memory should show to be faster like your pic.

Mar 5, 2011, 11:22 PM	#11826
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.94/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	Can you get it over 4GHz? __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Processor:	Phenom II 965
Motherboard:	Biostar TA870+
Cooling:	Zalman CNPS10X Performa
Memory:	Kingston hyperx 1600mhz 2x8gb
Video Card:	ASUS Radeon HD 6870 DirectCU II 990/1250 stock volts
Hard Disk:	Seagate 500gb, Wd 1tb black
Optical Drive:	Sony optiarc dvd-rw
CRT/LCD Model:	SAMSUNG 2433BW 24
Case:	Thermaltake v3 black edition
Sound Card:	onboard, Logitech x540
PSU:	Antec true power modular 650 watt
Software:	Windows 7 x64 ultimate

System Name:	Deployment build
Processor:	Phenom II B97@4080mhz 1.6v (24/7 4800mhz max clock)
Motherboard:	Asus Crosshair V Formula
Cooling:	Coolermaster V10 96w TEC, Scientific Rulian fans
Memory:	4x4GB Wintec ONE 1800 9-10-9 1.62v (24/7)
Video Card:	Sapphire 7950 3GB 1150/1400 1.27v
Hard Disk:	2x32GB STT SSD's raid 0, 1TB Samsung F3's, 1.5TB Seagate 7200.11
CRT/LCD Model:	STi 22"
Case:	Thermaltake Commandar MS-I Epic Edition
Sound Card:	E07K USB DAC->Fischer FA-002W High edition
PSU:	Antec TPQ-1200
Software:	windows 7 ultimate x64

Processor:	Phenom II 965
Motherboard:	Biostar TA870+
Cooling:	Zalman CNPS10X Performa
Memory:	Kingston hyperx 1600mhz 2x8gb
Video Card:	ASUS Radeon HD 6870 DirectCU II 990/1250 stock volts
Hard Disk:	Seagate 500gb, Wd 1tb black
Optical Drive:	Sony optiarc dvd-rw
CRT/LCD Model:	SAMSUNG 2433BW 24
Case:	Thermaltake v3 black edition
Sound Card:	onboard, Logitech x540
PSU:	Antec true power modular 650 watt
Software:	Windows 7 x64 ultimate

Mar 5, 2011, 11:25 PM	#11827
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	oh hell yea i was at 4.2ghz last night 1.4750v stable for 2 hrs and something i bet i could even run a lower vcore, go back a page i posted my results chicken

Mar 6, 2011, 12:46 AM	#11829
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	4.4ghz nor 4.5ghz wont go, has o be the board or max of cpu, ill find out when i make it a dual core 4.5ghz if the same results the then i will know if its the board or cpu

Mar 6, 2011, 12:46 AM	#11830
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	working on 4.3ghz as we speak as a quad core 1.5250v

Mar 6, 2011, 01:27 AM	#11831
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	this does not seem right 22c as a dual core 4500mhz idle

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Mar 6, 2011, 02:44 AM	#11834
claylomax Join Date: Apr 2010 Location: London Posts: 1,385 (1.22/day) Thanks: 119 Thanked 251 Times in 217 Posts System Specs	I finally got over 3.9GHz stable, 3.984MHz exactly, leaving the multiplier on auto. Not bad after trying for 9 months.

System Name:	Jaspe
Processor:	i7 3820 4.62Ghz 1.36v
Motherboard:	BIOSTAR TPower X79
Cooling:	Thermalright Archon Rev. A
Memory:	16Gb G.Skill Ripjaws 2000mhz
Video Card:	ATI HD7970
Hard Disk:	WD 600Gb Velociraptor
CRT/LCD Model:	Samsung 2433BW
Case:	Silverstone FT01B-W
Sound Card:	Onboard
PSU:	Antec Signature 650w
Software:	Windows 7 64

Mar 7, 2011, 01:44 AM	#11835
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	i only had this phenom II 555 for a few days 4.2ghz x4 24/7

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Mar 15, 2011, 05:50 AM	#11839
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	Where the hell did all the AMd OC'ers go? Was playing with the 1090T this evening and this is where im at so far

Mar 15, 2011, 10:02 AM	#11840
crunchie Join Date: Feb 2006 Location: Australia Posts: 89 (0.03/day) Thanks: 6 Thanked 21 Times in 20 Posts System Specs	Just a little more . http://valid.canardpc.com/show_oc.php?id=1305086

System Name:	Black Beauty
Processor:	Phenom II 1090T 6 core @ 4Ghz 1.344vcore
Motherboard:	GA-890FXA-UD5 F3 BIOS
Cooling:	Water
Memory:	GSkill Flare 2x2Gb 6-8-6-22-1T @ 1800Mhz
Video Card:	Gigabyte HD6870's xfired
Hard Disk:	GSkill Phoenix 120Gb SSD
Optical Drive:	Lite-on DVDRW SOHW-1673S. Toshiba CD/DVDW SH-W162C Dual Layer
CRT/LCD Model:	BENQ 24"
Case:	CM HAF-X
Sound Card:	Onboard
PSU:	Corsair HX850
Software:	W7 Pro 64bit
Benchmarks:	3Dmark11 P8935 WPrime 5.578sec

Mar 15, 2011, 12:18 PM	#11841
de.das.dude Join Date: Jun 2010 Location: Wild Wild East Posts: 4,523 (4.22/day) Thanks: 2,303 Thanked 1,311 Times in 898 Posts System Specs	dude.... you have a NB cooler right?? or it'll fry man... 3GHz!!! __________________ Cheers!

System Name:	SuperDuperUberComputer
Processor:	AMD Phenom II 945 X4 3.0Ghz
Motherboard:	ASRock 990FX Extreme 4
Cooling:	CM Hyper 212 EVO push:pull+ 1 panaflow 113CFM + 2 x 120mm NZXTs
Memory:	2x4GB DDR3 Corsair Vengeance 1600MHz CL9
Video Card:	GIGABYTE GTS450 OC2
Hard Disk:	SATA II 80GB Hitachi 7200RPM,W.D 500GB Green \|\| 4GB int + random SD cards
Optical Drive:	ASUS DVD drive
CRT/LCD Model:	Samsung Sync Master 793s CRT\|
Case:	NZXT Guardian 921RB
Sound Card:	Realtek ALC892 with THX True Studio
PSU:	Corsair GS600
Software:	Windows 7 64bit
Benchmarks:	real men dont need to bench :p

Mar 15, 2011, 12:29 PM	#11842
crunchie Join Date: Feb 2006 Location: Australia Posts: 89 (0.03/day) Thanks: 6 Thanked 21 Times in 20 Posts System Specs	Probably not 24/7 frequencies . Mine aren't.

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Mar 15, 2011, 12:38 PM	#11844
HUSKIE Join Date: Feb 2010 Location: Unayted Kingdam Posts: 458 (0.38/day) Thanks: 292 Thanked 143 Times in 94 Posts System Specs	I'm in I'm in..... __________________ CPU-Z validation sig pics temporarily blocked Last edited by HUSKIE; Mar 15, 2011 at 01:09 PM.

System Name:	Little tiny thin
Processor:	AMD X4 960T 4ghz @ 1.376v
Motherboard:	880GMA-USB3
Cooling:	Custom Old WC
Memory:	2x4GB 1600 corsair
Video Card:	ATI HD 4870 1GB
Hard Disk:	1X 250 SEAGATE BARRACUDA 1X500 WETERN DIGITAL 1X1TB SAMSUNG 1x200 SEAGATE
Optical Drive:	DUAL LAYER SAMSUNG
CRT/LCD Model:	23" Flatron W2361V
Case:	CASECOM 6788 MODDED SIDE PANEL
Sound Card:	ONBOARD
PSU:	XENTA GOLD 700WATTAGE
Software:	WINDOWS7 64-BIT
Benchmarks:	Still benching

Mar 15, 2011, 12:50 PM	#11845
Mussels Doctor Moderator Join Date: Oct 2004 Location: Bendigo, Australia (NOT THE USA) Posts: 34,548 (10.97/day) Thanks: 3,699 Thanked 8,688 Times in 6,389 Posts System Specs	what settings need to be changed to OC the NB? mines only at 2GHz, so i'd like to know some reccomended settings to get it higher (2.4-2.6 would be fine) i have the same board as crunchie, so his input would be appreciated __________________ Edumacational thread about PC Audio My external HDD's.5x samsung 1TB + 2x Seagate 1.5TB = 8 TB external storage 32 Bit OS vs 64 bit OS information How to get hardware accelerated H264 playback (DXVA) Netbook Owners United!

System Name:	Real Men use Real Cores!
Processor:	Phenom II x6 1090T: 3600Mhz undervolted (NB+HT at 2.6)
Motherboard:	Gigabyte 890FXA-UD5
Cooling:	Thermalright Ultra 120 Extreme (Lapped + ducted)
Memory:	8GB Corsair Dominator DDR3 - 1600Mhz 7-7-7-20 1.65V
Video Card:	AMD Radeon 5870 1GB Crossfire
Hard Disk:	Intel 520 SSD (120GB), 500GB OS + 18TB of storage (mostly external)
Optical Drive:	Samsung Blu Ray drive (SH-B083A)
CRT/LCD Model:	23.6" Samsung 1080P / Samsung 40" HDTV - 1360x768P
Case:	Coolermaster CM 690 II Advanced (non window)
Sound Card:	Auzentech X-Mystique (Logitech Z5500D + sennheiser HD555 + RE2's)
PSU:	Corsair HX 1000W
Software:	Windows 7 Ultimate x64 - kaspersky internet security 2011
Benchmarks:	Laptop: AMD A6 APU 1.4GHz @2.2GHz quad core + APU crossfire. 8GB DDR3, 750GB HDD

Mar 15, 2011, 01:16 PM	#11849
Mussels Doctor Moderator Join Date: Oct 2004 Location: Bendigo, Australia (NOT THE USA) Posts: 34,548 (10.97/day) Thanks: 3,699 Thanked 8,688 Times in 6,389 Posts System Specs	i tried 1.30v... some impressive boosts to memory speed at 2.6Ghz NB, compared to stock 2Ghz. if my math holds true, the L1 read is 18% faster now, after a 30% increase in NB clocks. nice improvements, now to test stability. __________________ Edumacational thread about PC Audio My external HDD's.5x samsung 1TB + 2x Seagate 1.5TB = 8 TB external storage 32 Bit OS vs 64 bit OS information How to get hardware accelerated H264 playback (DXVA) Netbook Owners United!

Mar 15, 2011, 01:19 PM	#11850
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.14/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Might be able to get 2.8, my lil C3 does 2.6 no sweat, try for 3.8Ghz clock speed also. A good way to figure out if your bottlenecked by NB is look at your Memory and L3 cache reads, memory should show to be faster like your pic. __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Introduces AMD LIVE! Ultra Desktop and Notebook PCs	malware	News	4	Jan 8, 2008 11:01 PM
New Enthusiast Products from AMD Command Strong Ecosystem Support	malware	News	8	Nov 20, 2007 06:19 PM
AMD Introduces World's First Comprehensive, Cutting-Edge PC Platform	malware	News	40	Nov 20, 2007 01:33 PM
AMD Introduces Quad-Core Barcelona	malware	News	26	Sep 11, 2007 06:28 PM
AMD drives next generation of energy-efficient computing with 65nm technology transition	DanTheBanjoman	News	6	Dec 6, 2006 12:33 PM