TPU's F@H Team - Page 560

Mindweaver · May 3, 2011, 10:48 PM

Hey guys i've got my i7 970 switched over from wcg to folding to get ready for CC. I've got it setup for bigadv!

bogmali · May 4, 2011, 01:22 AM

Quote:

Originally Posted by Mindweaver

Hey guys i've got my i7 970 switched over from wcg to folding to get ready for CC. I've got it setup for bigadv!

Appreciate the help bro!

Mindweaver · May 4, 2011, 02:05 AM

Quote:

Originally Posted by bogmali

Appreciate the help bro!

No problem bro!

Chicken Patty · May 4, 2011, 04:48 AM

Wish I still had my i7 to help you guys out.

mstenholm · May 4, 2011, 09:52 AM

I was going to make the switch to the CC username this morning when my 2685 had completed (my other rig will complete a 2686 in a few hours) but I can't upload it since the collection server is down. If I just start a new project under the ChimPowerUp name it will never upload and I lose 2*92 K (counting down). I give it five hours and take the loose. Damn, bad start.

Edit: Got one transmitted and got a 2684 in return. Hmmm, at least I'm producing for the CC.
2nd Edit: Got the other one shipped as well and got an identical WU (down to same run and all) on that rig. Will wait untill the 6900/6901 server sends again.
3rd edit: Finally got it sorted out - 124 k PPD towards to Chimp put.

BUCK NASTY · May 4, 2011, 01:44 PM

Quote:

Originally Posted by mstenholm

I was going to make the switch to the CC username this morning when my 2685 had completed (my other rig will complete a 2686 in a few hours) but I can't upload it since the collection server is down. If I just start a new project under the ChimPowerUp name it will never upload and I lose 2*92 K (counting down). I give it five hours and take the loose. Damn, bad start.

I'm switching everything over tonight. Still gotta work out some stability issues with a problematic i7-870/2x GTX460 rig. I also had a Antec EA-650 PSU burn out yesterday. Been running it hard 24/7 for 3 years now. Replaced it with a spare EA-500D that will hopefully last thru the CC(drawing 430w continuous

). I hope everyone is ready for tomorrow!

bogmali · May 4, 2011, 01:48 PM

Switching everything tonight..........Should have an awesome turnout with the crunchers chipping in

BUCK NASTY · May 4, 2011, 01:56 PM

Quote:

Originally Posted by bogmali

Switching everything tonight..........Should have an awesome turnout with the crunchers chipping in

I have had PM's from 4 new Folders this morning, mainly due to the TPU Frontpage news that btarunr posted for us. We need to be prepared to assist new members with their clients.

TeXBill · May 4, 2011, 02:02 PM

I will switch all of my computers I have at work before I leave today.
I will switch my home computers out tonight also.

Quote:

We need to be prepared to assist new members with their clients.

Be glad to help out any of the newcomers we have.

Bow · May 5, 2011, 12:05 AM

All set up

BUCK you are the man

BUCK NASTY · May 5, 2011, 12:11 AM

Quote:

Originally Posted by Bow

All set up

BUCK you are the man

Congrats on the nice hardware you got there Bow! Looks like Bow should be throwing 15K ppd our way!!!

johnspack · May 5, 2011, 11:39 PM

Sorry guys, both boxes are temp offline. When they come back up, one will be with the chimp.....

johnspack · May 5, 2011, 11:47 PM

Okay, fine, box #1 up and running for the chimp. I'm leaving the other one to finish the gap, then I may turn it over as well.

Bow · May 5, 2011, 11:52 PM

BUCK NASTY · May 5, 2011, 11:58 PM

Quote:

Originally Posted by johnspack

Okay, fine, box #1 up and running for the chimp. I'm leaving the other one to finish the gap, then I may turn it over as well.

Thank you Pete!

bogmali · May 6, 2011, 12:17 AM

It looks like one of my -bigadv will dump on my regular username

, we will see tonight.

MAGMADIVER · May 6, 2011, 06:14 AM

I updated to 7.1.24 and it worked fine for a few days then suddenly my computer freezes when it downloads a new WU. However, it only freezes when I am AFK, and when I witness a new WU being downloaded it works fine. Any suggestions? if not then I am going to revert back to .21

(FIH) The Don · May 6, 2011, 07:01 AM

does anyone have experience with the f@h monitor for android?

bogmali · May 6, 2011, 03:04 PM

Quote:

Originally Posted by MAGMADIVER

I updated to 7.1.24 and it worked fine for a few days then suddenly my computer freezes when it downloads a new WU. However, it only freezes when I am AFK, and when I witness a new WU being downloaded it works fine. Any suggestions? if not then I am going to revert back to .21

If it keeps freezing then revert back to what you know that works.

************************************************** ****

My server is off limits right now because it's too busy

Busy from doing this

TeXBill · May 6, 2011, 03:06 PM

Quote:

does anyone have experience with the f@h monitor for android?

Yes what do you need??

Athlonite · May 7, 2011, 12:37 AM

Quote:

Originally Posted by MAGMADIVER

I updated to 7.1.24 and it worked fine for a few days then suddenly my computer freezes when it downloads a new WU. However, it only freezes when I am AFK, and when I witness a new WU being downloaded it works fine. Any suggestions? if not then I am going to revert back to .21

are you using the cat 11.4 march 26th update driver as I had the same problems as you it's not the client it's the driver even just using AIDA64 to show openCL info would lock the PC while running F@H so I went back to the previous 11.4 update and all is good now

bogmali · May 7, 2011, 01:48 PM

2600K up and running, 4.2Ghz ATM and will adjust once I verify that she is stable

Yukikaze · May 7, 2011, 04:52 PM

I need some help. I am trying to get my two new folding rigs going for TPU. I have an Opty 180 and a Celeron E1500 based systems. The first is running Vista Business 32-bit, the latter is running Ubuntu 10.04LTS. I need to see if I have any MSDNAA Windows licenses left to switch the Linux box over to Windows (from what I gather, folding on GPUs on Linux is a bit of a hassle), so that will take a bit.

However, I am having issues with the Opteron 180 box. The CPU is overclocked at 2.8Ghz, but it is stable (and has been for months now), and I am not using the CPU client on it anyway. The 9600GSOs and the 8400GS are all at stock and they keep on killing the nvidia driver or simply locking up the system once I try to fold. It doesn't matter if I fold on one card, two cards or all three cards, and even the 8400GS alone kills the system. I've played games on this box, and I'd run stuff like Furmark on the GPUs to make sure nothing is faulty, so I don't think the problem is in the HW.

Any ideas?

thebluebumblebee · May 7, 2011, 05:56 PM

Quote:

Originally Posted by Yukikaze

I need some help. I am trying to get my two new folding rigs going for TPU. I have an Opty 180 and a Celeron E1500 based systems. The first is running Vista Business 32-bit, the latter is running Ubuntu 10.04LTS. I need to see if I have any MSDNAA Windows licenses left to switch the Linux box over to Windows (from what I gather, folding on GPUs on Linux is a bit of a hassle), so that will take a bit.

However, I am having issues with the Opteron 180 box. The CPU is overclocked at 2.8Ghz, but it is stable (and has been for months now), and I am not using the CPU client on it anyway. The 9600GSOs and the 8400GS are all at stock and they keep on killing the nvidia driver or simply locking up the system once I try to fold. It doesn't matter if I fold on one card, two cards or all three cards, and even the 8400GS alone kills the system. I've played games on this box, and I'd run stuff like Furmark on the GPUs to make sure nothing is faulty, so I don't think the problem is in the HW.

Any ideas?

Do you have your desktop extended to the second video card? My next suggestion would be to pull the 8400GS and see if that fixes things. I have a A8n-sli with 2 9600GSO's, BTW

bogmali · May 7, 2011, 06:13 PM

Fold with the 9600GSO and don't bother with the 8400, the PPD is not worth the strain it puts on the CPU.

May 3, 2011, 10:48 PM	#13976
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,894 (2.55/day) Thanks: 4,383 Thanked 2,365 Times in 1,183 Posts System Specs	Hey guys i've got my i7 970 switched over from wcg to folding to get ready for CC. I've got it setup for bigadv! __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

May 4, 2011, 04:48 AM	#13979
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,926 (11.77/day) Thanks: 15,179 Thanked 12,324 Times in 7,786 Posts System Specs	Wish I still had my i7 to help you guys out. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

May 4, 2011, 09:52 AM	#13980
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,773 (1.34/day) Thanks: 1,011 Thanked 1,051 Times in 645 Posts System Specs	2685+6 collection server down I was going to make the switch to the CC username this morning when my 2685 had completed (my other rig will complete a 2686 in a few hours) but I can't upload it since the collection server is down. If I just start a new project under the ChimPowerUp name it will never upload and I lose 292 K (counting down). I give it five hours and take the loose. Damn, bad start. Edit: Got one transmitted and got a 2684 in return. Hmmm, at least I'm producing for the CC. 2nd Edit: Got the other one shipped as well and got an identical WU (down to same run and all) on that rig. Will wait untill the 6900/6901 server sends again. 3rd edit: Finally got it sorted out - 124 k PPD towards to Chimp put. Last edited by mstenholm; May 4, 2011 at 06:06 PM.*

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

May 4, 2011, 01:48 PM	#13982
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,055 (3.15/day) Thanks: 1,194 Thanked 4,112 Times in 2,082 Posts System Specs	Switching everything tonight..........Should have an awesome turnout with the crunchers chipping in __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

System Name:	Beast, little beast
Processor:	Core i7 2600K 4.5GHZ 24/7, Core i7 Xeon6 core 3.6GHZ 24/7
Motherboard:	Gigabyte Z68X-UD4-B3 1155Sckt, EVGA X58 sckt 1366
Cooling:	H80, H100
Memory:	24 gigs DDR3 1600Mhz Gskill RipJaws,12 gigs DDR3 1600Mhz Gskill Ripjaws
Video Card:	1 Nvidia 670 eVGA FTW, 1 Nvidia 580 eVGA
Hard Disk:	1- WD Black 640GB, 1X Samsung 1.5TB, 2 X 160 WD Veloc Raptors Raided
Optical Drive:	2 X Asus DVD/RW, LG DVDRW
CRT/LCD Model:	Hanns-G 28" 1920X1200, Acer 24" 1920X1200
Case:	rig#1 Dismatech test bench, rig#2 Made By Bill Tech Bench
Sound Card:	onboard
PSU:	Antec 1000 Watt, PC power&cooling 850 watt
Software:	both Rig's, Win7 64Bit
Benchmarks:	rig #1 4.8GHZ @ 1.375 Volts. running 4.5GHZ 1.272 Volts 24/7. Rig #2 4.6GHZ @ 1.3 Volts 24/7.

May 5, 2011, 12:05 AM	#13985
Bow Join Date: Jul 2008 Location: South Colton, New York Posts: 1,677 (0.94/day) Thanks: 770 Thanked 667 Times in 404 Posts System Specs	All set up BUCK you are the man

System Name:	SLO-MO-SHUN
Processor:	AMD Phenom II X6 1100T 3.97ghz
Motherboard:	MSI 990FXA-GD80 AM3+ AMD 990FX
Cooling:	CORSAIR CWCH50-1 High Performance Water Cooler
Memory:	G.Skill Ripjaws 8 GB (2 x 4 GB) DDR3 1600
Video Card:	SAPPHIRE HD 7970 3GB GDDR5 Twin Fan
Hard Disk:	SEAGATE Barracuda 7200 RPM 1TB, OCZ Vertex2 60GB SSD
Optical Drive:	ASUS DRW 24B1ST SATA 24X DVD Burner
CRT/LCD Model:	ASUS VH238H 24" 1080P 2MS HDMI LCD
Case:	AZZA Hurrican 2000
Sound Card:	MSI Onboard/Realtek
PSU:	XFX Black Edition XPS-850W 80 Plus Silver
Software:	MICROSOFT Windows 7, 64 Bit

May 5, 2011, 11:39 PM	#13987
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,750 (1.80/day) Thanks: 283 Thanked 754 Times in 519 Posts System Specs	Sorry guys, both boxes are temp offline. When they come back up, one will be with the chimp..... __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

System Name:	Blacknet
Processor:	i7 950@ 4.1GHz
Motherboard:	Asus Rampage II Gene
Cooling:	Noctua NH-D14, 8 case fans
Memory:	24GB gskill ripjaws@ 1800mhz
Video Card:	Evga GTX480 + GTX285 Physx + TrackIR 5
Hard Disk:	WD Black 1TB 64mb cache + Spinpoint F1 750g backup + 2TB Seagate backup + 320GB Seagate backup
Optical Drive:	LG BH12LS38 Blu Ray burner
CRT/LCD Model:	Syncmaster 2443BW 1920x1200 Lcd + 19" ViewSonic Lcd
Case:	Antec 1200
Sound Card:	Onboard
PSU:	Silverstone 850Watt Strider+ Modular
Software:	Win7 x64 SP1 Ultimate
Benchmarks:	Time to upgrade to 680s....

May 5, 2011, 11:47 PM	#13988
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,750 (1.80/day) Thanks: 283 Thanked 754 Times in 519 Posts System Specs	Okay, fine, box #1 up and running for the chimp. I'm leaving the other one to finish the gap, then I may turn it over as well. __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

May 5, 2011, 11:52 PM	#13989
Bow Join Date: Jul 2008 Location: South Colton, New York Posts: 1,677 (0.94/day) Thanks: 770 Thanked 667 Times in 404 Posts System Specs	__________________ "I didn't want my Mom to know I was drag racing for 20 years so I told her I was in prison."

May 6, 2011, 12:17 AM	#13991
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,055 (3.15/day) Thanks: 1,194 Thanked 4,112 Times in 2,082 Posts System Specs	It looks like one of my -bigadv will dump on my regular username , we will see tonight. __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

May 6, 2011, 06:14 AM	#13992
MAGMADIVER Join Date: Jul 2008 Location: FT. LEWIS Posts: 163 (0.09/day) Thanks: 58 Thanked 45 Times in 33 Posts System Specs	I updated to 7.1.24 and it worked fine for a few days then suddenly my computer freezes when it downloads a new WU. However, it only freezes when I am AFK, and when I witness a new WU being downloaded it works fine. Any suggestions? if not then I am going to revert back to .21 __________________

System Name:	떡을치래
Processor:	Phenom II 965 @4GHz
Motherboard:	ASUS Crosshair IV Formula
Cooling:	Zerotherm Nirvana NV120
Memory:	2x4GB OCZ Gold DDR3 1600
Video Card:	XFX Radeon 5970
Hard Disk:	OCZ Vertex2 SSD 100GB; WD Black Caviar 1TB
Optical Drive:	LG BLU-RAY BD-RE & HDDVD ROM (GGW-H20L)
CRT/LCD Model:	24" HPZR24W (1920x1200) & 24" Westinghouse L2410NM (1920x1200)
Case:	Cooler Master 632 HAF
Sound Card:	ONBOARD
PSU:	Corsair HX1000W
Software:	Windows 7 Ultimate (64bit)

May 6, 2011, 07:01 AM	#13993
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,407 (3.84/day) Thanks: 3,101 Thanked 2,970 Times in 1,835 Posts System Specs	does anyone have experience with the f@h monitor for android? __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

System Name:	Xtreme PC's AMDx4
Processor:	AMD Phenom II x4 965BE @ 3.41GHz NB/HT @ 2.4GHz
Motherboard:	Asus Crosshair IV Formula
Cooling:	ThermoLab Baram 1x 120mm SS Air Penartrator 1x SS generic case fan
Memory:	8GB Corsair Vengence LP 1600MHz 9-9-9-24CR1
Video Card:	Sapphire Radeon HD7850 2GB 920/1250MHz
Hard Disk:	2x Samsung HD501IJ Raid0 boot / 1x Samsung HD501IJ + 1x WD 250GB storage
Optical Drive:	1xSATA Pioneer DVR212S 18x
CRT/LCD Model:	Alienware OptX AW2210 22" LCD 1920x1080p
Case:	SilverStone Raven RV02B-W + 3x SS AP181
Sound Card:	Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp
PSU:	SilverStone ST75F-P Modular 750W
Software:	Windows 7 X64 RTM
Benchmarks:	it sucks much

May 7, 2011, 01:48 PM	#13997
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,055 (3.15/day) Thanks: 1,194 Thanked 4,112 Times in 2,082 Posts System Specs	2600K up and running, 4.2Ghz ATM and will adjust once I verify that she is stable __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

May 7, 2011, 04:52 PM	#13998
Yukikaze Join Date: Sep 2008 Location: Jerusalem, Israel Posts: 2,121 (1.23/day) Thanks: 213 Thanked 481 Times in 347 Posts System Specs	I need some help. I am trying to get my two new folding rigs going for TPU. I have an Opty 180 and a Celeron E1500 based systems. The first is running Vista Business 32-bit, the latter is running Ubuntu 10.04LTS. I need to see if I have any MSDNAA Windows licenses left to switch the Linux box over to Windows (from what I gather, folding on GPUs on Linux is a bit of a hassle), so that will take a bit. However, I am having issues with the Opteron 180 box. The CPU is overclocked at 2.8Ghz, but it is stable (and has been for months now), and I am not using the CPU client on it anyway. The 9600GSOs and the 8400GS are all at stock and they keep on killing the nvidia driver or simply locking up the system once I try to fold. It doesn't matter if I fold on one card, two cards or all three cards, and even the 8400GS alone kills the system. I've played games on this box, and I'd run stuff like Furmark on the GPUs to make sure nothing is faulty, so I don't think the problem is in the HW. Any ideas? __________________ Cameron: Core i7 2600K 4.5Ghz, MCR220, 2xMCR120, MCP655, ASRock P67 Extreme4, 4GB DDR3, 2xOCZ Vertex 30GB RAID0, GTX470, 2xHD5670, Modu82+ 625W, TT Xaser VI. Neuromancer: Core i7 975, DFI DK X58-T3eH6, 12GB DDR3 1333Mhz CL6-6-6-15-1T, 3x9600GSO 384MB, Hiper 880W, TT Xaser VI. Administrator of a 40 core Hadoop cluster.

System Name:	Wintermute
Processor:	Intel Core i7 990X Extreme Edition @ 4.3Ghz
Motherboard:	Asus Rampage III Extreme
Cooling:	Swiftech MCP655, MCR320-QP, MCR220 and MCRES Rev2, EK Supreme HF Cu, Tygon 1/2", Bitspower Fittings.
Memory:	12GB (3x4GB) Corsair Vengeance 2Ghz CL10-10-10-27
Video Card:	Sapphire HD7950 3GB + Palit GeForce GTX470 1280MB Dual Fan + Sapphire HD6570 1GB
Hard Disk:	Intel X-25M 160GB SSD (Win7) + Patriot Torqx2 64GB SSD (Ubuntu) + 3 x Samsung F2 1.5TB RAID5
Optical Drive:	LG x22 DVD-RW
CRT/LCD Model:	2 x Samsung 2333T 23" + Samsung 2333SW 23" + 1 x LG L2000CN 20" + 1 Chimei 19" + 1 Sony 32" TV
Case:	Cooler Master ATCS 840
Sound Card:	Musiland Monitor 02 US + Logitech Z-2300 + Sennheiser PXC350
PSU:	Corsair TX750
Software:	Windows 7 Professional 64-bit + Ubuntu 10.4.2LTS 64-bit

System Name:	Current/NEW!
Processor:	AMD Athlon 64 X2-4400+/i7-2600K
Motherboard:	Gigabyte GA-K8NS Ultra-939/GA-P67A-UD4-B3
Cooling:	OCZ Vendetta/H80
Memory:	2GB DDR-400/8GB Corsair DDR3 1600
Video Card:	RADEON 9800 PRO AGP/2x GB GTX 560 Ti
Hard Disk:	Seagate 160GB IDE/120GB Samsung 830 & Seagate 2TB
Optical Drive:	LITE-ON DVDRW LH-20A1L/Pioneer DVR-219LBK
CRT/LCD Model:	Samsung SyncMaster B1940/Asus 24' LED
Case:	Ever Case E4252WSF-F/Antec P280 It's huge!
Sound Card:	SB Audigy 2 ZS/on board
PSU:	Corsair VX550/SeaSonic S12II 620
Software:	XP MCE SP3/Win 7 Home Premiun 64 Bit
Benchmarks:	Are you kidding?/3DMark11 basic P8681

May 7, 2011, 06:13 PM	#14000
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,055 (3.15/day) Thanks: 1,194 Thanked 4,112 Times in 2,082 Posts System Specs	Fold with the 9600GSO and don't bother with the 8400, the PPD is not worth the strain it puts on the CPU. __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)