2011 Chimp Challenge has started!!! - Page 6

BUCK NASTY · May 4, 2011, 02:52 PM

Quote:

Originally Posted by KieX

Someone is using ChimpPowerUp. Remember it's case sensitive!

Yep, looks like we have a mis-spelling. Check your clients guy's!

Chicken Patty · May 4, 2011, 03:20 PM

We are going to kick ass this year!!!!

horik · May 4, 2011, 04:18 PM

could you send me the pass key,i just installed v7 client

oily_17 · May 4, 2011, 04:21 PM

Quote:

Originally Posted by horik

could you send me the pass key,i just installed v7 client

PM sent..

TeXBill · May 4, 2011, 05:21 PM

Got my work computers switched over.

sy5tem · May 4, 2011, 06:39 PM

all right might i have password please! gona make my cpu work too!

sy5tem · May 4, 2011, 06:45 PM

i am using client 7 , what is the team number? cause your how-to is for old client! , the client 7 look older but it work with my 6950! sooo if anybody can enlighten me on how to work for techpowerup

also i build a computer for my wife using old hardware . a gts250 with a dual core e6300 , can i use the GPU on same account? can i just install server over my wife computer and the client on my machine control it?

thebluebumblebee · May 4, 2011, 06:59 PM

Quote:

Originally Posted by sy5tem

i am using client 7 , what is the team number? cause your how-to is for old client! , the client 7 look older but it work with my 6950! sooo if anybody can enlighten me on how to work for techpowerup

Ok

, you're right. The team number is 50711. Make sure you have "advanced" set for that GPU slot. See this post: http://www.techpowerup.com/forums/sh...postcount=1508

FAHtracker works with all of the up-to-date clients except for the new core for HD5xxx and newer cards.

sy5tem · May 4, 2011, 07:16 PM

Quote:

Originally Posted by BUCK NASTY

5)For Radeon HD5xxx or newer: Please read completly through this step before continuing. Folding on Radeon cards has been very frustrating due to their low PPD. FAHClient V7 introduces a new core, fahcore_16, for HD5xxx and newer Radeon cards. In order to get the client to request work units for this core, you must configure the GPU slot(s) as shown in this post. (that proceedure is needed if you install the GPU slot without the directions below) But, before you get there, install the client for anything but a GPU slot. SMP or uniprocessor recommended. Then add the GPU slot. Follow the instuctions here EXCEPT when you get to figure 5, before clicking on OK, click on Add under Extra slot options (expert only) and then type client-type in for the name and advmethods for the value and then click OK and then OK. Repeat as necessary.The client will start automatically. Do not disable Crossfire! (if applicable)

if i follow this link it tells me to use

Code:

client-type:advanced

but later in your sentence its tell me to use

Code:

client-type:advmethods

which one is the good one ?

thebluebumblebee · May 4, 2011, 07:22 PM

The stinkers changed terminology on us. Advanced is the one to use

sy5tem · May 4, 2011, 07:31 PM

Quote:

Originally Posted by thebluebumblebee

The stinkers changed terminology on us. Advanced is the one to use

humm intriguing :P lol what should a 6950 score be?

BTW i still need to pass key! ty

Mindweaver · May 4, 2011, 09:38 PM

Hey guys! a little help here.. I've got my 970 setup for smp using bigadv.. but does this look right? ETA:2.04 days? Base Credit Unknown, Estimated Credit Unknown, Estimated PPD Unknown, Estimated TPF 35mins 04 secs, Project 2686, FahCore 0xa5... Thanks!

(FIH) The Don · May 4, 2011, 09:39 PM

it will take some time to claculate the PPD afaik,

Mindweaver · May 4, 2011, 09:40 PM

yea but does "ETA:2.04 days" look right?

(FIH) The Don · May 4, 2011, 09:41 PM

for one of the big ones? i think so yeah, its pretty time consuming

Mindweaver · May 4, 2011, 09:42 PM

I guess i'll have to stop this one mid way.. to switch over to CC.

(FIH) The Don · May 4, 2011, 09:42 PM

just wait a sec lol, im not 110% sure, wait for the other guys

mstenholm · May 4, 2011, 09:46 PM

Quote:

Originally Posted by Mindweaver

Hey guys! a little help here.. I've got my 970 setup for smp using bigadv.. but does this look right? ETA:2.04 days? Base Credit Unknown, Estimated Credit Unknown, Estimated PPD Unknown, Estimated TPF 35mins 04 secs, Project 2686, FahCore 0xa5... Thanks!

Mine "970s" take 1½ day +/- ½ hour on 2685, 86, 92 and 6900 and 6901 (21:00 to 22:00). that is at 4.1 Ghz, so no that does not look right. Which program are you using? I don't use the Fahtracker V2 but the stand alone program. Do you have GPUs doing F@H in the same rig?

Mindweaver · May 4, 2011, 09:49 PM

Quote:

Originally Posted by mstenholm

Mine "970s" take 1½ day +/- ½ hour on 2685, 86, 92 and 6900 and 6901 (21:00 to 22:00). that is at 4.1 Ghz, so no that does not look right. Which program are you using? I don't use the Fahtracker V2 but the stand alone program. Do you have GPUs doing F@H in the same rig?

I've got mine at stock.. I'll overclock it tomorrow. What's your settings to reach 4.1?

Yes i have a gpu doing F@H as well. and i'm using the v7 program.

mstenholm · May 4, 2011, 09:53 PM

Quote:

Originally Posted by Mindweaver

I've got mine at stock.. I'll overclock it tomorrow. What's your settings to reach 4.1?

1.31 V BIOS, load line calibration on (low). Gives me 1.28ish.

One GPU adds around 2:00 per frame on my rigs.

Mindweaver · May 4, 2011, 09:56 PM

I plain to have a 480 folding in my 970 tomorrow.

EDIT: Got to run guys.. I'll check back here in a few hours. Thanks!

mstenholm · May 4, 2011, 09:58 PM

Quote:

Originally Posted by Mindweaver

I plain to have a 480 folding in my 970 tomorrow.

EDIT: Got to run guys.. I'll check back here in a few hours. Thanks!

If you could put that GPU in another rig it would help a lot on your PPD.

lauri_hoefs · May 4, 2011, 10:30 PM

Hi!

Could someone send me the pass key, please?

Thanks

bogmali · May 4, 2011, 10:50 PM

Quote:

Originally Posted by sy5tem

BTW i still need to pass key! ty

Quote:

Originally Posted by lauri_hoefs

Hi!

Could someone send me the pass key, please?

Thanks

Sent

Birdman86 · May 4, 2011, 10:51 PM

Hi, I joined the team for Chimp Challenge and here is how my folding is going now:

Is all OK, or is there something wrong? Is my SMP PPD low or OK? Looks like I'll only complete three of those WUs during these 10 days if all goes well.
Should I add the -verbosity 9?

I had to OC and configure clients just in a couple hours. I just crashed a couple times with Prime95 at 4.5 GHz and a bit higher voltage and then ran Prime95 OK for a bit more than one hour at 4.2 GHz. Then I just started folding and OCd GPU a bit while folding. I just have to hope my PC keeps running for at least 11 days without any EUEs. I'd also like to run my GPU at 750/1500, but I'll try that tomorrow when I can watch better whether it works or not.

I also have my old Q6600 rig with one GT 8800 (other GT 8800 also available but not installed) that folded all my points when I was folding some years ago. Would that rig still be worth setting up for folding?

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

May 4, 2011, 03:20 PM	#127
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	We are going to kick ass this year!!!! __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	MEGAWATT
Processor:	I7 950 @4Ghz
Motherboard:	Gigabyte Ga-EX58-UD5
Cooling:	Cogage True Spirit
Memory:	6 Gb G-Skill Trident 16000
Video Card:	Sapphire HD 6950 with 6970 powers
Hard Disk:	1TB WD Green
CRT/LCD Model:	Samsung 40" Full HD Led TV
Case:	NZXT Tempest
PSU:	750w
Software:	Win 7 Home Premium 64 bits

Processor:	Q9550 @3.8
Motherboard:	Asus Maximus Extreme
Cooling:	Custom water cooling
Memory:	4GB Patriot Viper DDR3 1600MHz
Video Card:	2x HD4870 512MB
Hard Disk:	2x 500GB
CRT/LCD Model:	3x LG L226WTQ 22" Widescreen LCD
Case:	Modded TJ07
Sound Card:	On board
PSU:	PC P&C Silencer 750
Software:	Windows 7 Ultimate

May 4, 2011, 04:18 PM	#128
horik Join Date: Dec 2010 Posts: 235 (0.26/day) Thanks: 32 Thanked 44 Times in 22 Posts System Specs	could you send me the pass key,i just installed v7 client

May 4, 2011, 05:21 PM	#130
TeXBill Join Date: Oct 2009 Location: TX Posts: 1,348 (1.04/day) Thanks: 1,431 Thanked 643 Times in 431 Posts System Specs	Got my work computers switched over. __________________ heatware:[http://www.heatware.com/eval.php?id=69231]

System Name:	Beast, little beast
Processor:	Core i7 2600K 4.5GHZ 24/7, Core i7 Xeon6 core 3.6GHZ 24/7
Motherboard:	Gigabyte Z68X-UD4-B3 1155Sckt, EVGA X58 sckt 1366
Cooling:	H80, H100
Memory:	24 gigs DDR3 1600Mhz Gskill RipJaws,12 gigs DDR3 1600Mhz Gskill Ripjaws
Video Card:	1 Nvidia 670 eVGA FTW, 1 Nvidia 580 eVGA
Hard Disk:	1- WD Black 640GB, 1X Samsung 1.5TB, 2 X 160 WD Veloc Raptors Raided
Optical Drive:	2 X Asus DVD/RW, LG DVDRW
CRT/LCD Model:	Hanns-G 28" 1920X1200, Acer 24" 1920X1200
Case:	rig#1 Dismatech test bench, rig#2 Made By Bill Tech Bench
Sound Card:	onboard
PSU:	Antec 1000 Watt, PC power&cooling 850 watt
Software:	both Rig's, Win7 64Bit
Benchmarks:	rig #1 4.8GHZ @ 1.375 Volts. running 4.5GHZ 1.272 Volts 24/7. Rig #2 4.6GHZ @ 1.3 Volts 24/7.

May 4, 2011, 06:39 PM	#131
sy5tem Join Date: Nov 2004 Location: Canada/quebec/Montreal Posts: 442 (0.14/day) Thanks: 37 Thanked 48 Times in 36 Posts System Specs	all right might i have password please! gona make my cpu work too! __________________

System Name:	Custom DIY
Processor:	Intel i7 2600K @ 4.8 Turbo 1.4v
Motherboard:	Asus P8Z68-V Pro 8801
Cooling:	XSPC RS240 + 120mm Rad/fan
Memory:	Corsair 1866 Vangence 9-10-9-27-2T
Video Card:	2X EVGA GTX570 SLI
Hard Disk:	OCZ Revodrive 110GB + 2x1TB seagate
Optical Drive:	SATA TSSTcorp SH-S223C SB03ROM
CRT/LCD Model:	ASUS MT276HE
Case:	CoolerMaster Sniper
Sound Card:	X-Fi Titanium Fatal1ty Professional Series
PSU:	ANTEC TP-750 Blue 750Watts
Software:	win7 64
Benchmarks:	http://3dmark.com/3dm11/1347866

May 4, 2011, 06:45 PM	#132
sy5tem Join Date: Nov 2004 Location: Canada/quebec/Montreal Posts: 442 (0.14/day) Thanks: 37 Thanked 48 Times in 36 Posts System Specs	i am using client 7 , what is the team number? cause your how-to is for old client! , the client 7 look older but it work with my 6950! sooo if anybody can enlighten me on how to work for techpowerup also i build a computer for my wife using old hardware . a gts250 with a dual core e6300 , can i use the GPU on same account? can i just install server over my wife computer and the client on my machine control it? __________________ Last edited by sy5tem; May 4, 2011 at 07:01 PM.

System Name:	Current/NEW!
Processor:	AMD Athlon 64 X2-4400+/i7-2600K
Motherboard:	Gigabyte GA-K8NS Ultra-939/GA-P67A-UD4-B3
Cooling:	OCZ Vendetta/H80
Memory:	2GB DDR-400/8GB Corsair DDR3 1600
Video Card:	RADEON 9800 PRO AGP/2x GB GTX 560 Ti
Hard Disk:	Seagate 160GB IDE/120GB Samsung 830 & Seagate 2TB
Optical Drive:	LITE-ON DVDRW LH-20A1L/Pioneer DVR-219LBK
CRT/LCD Model:	Samsung SyncMaster B1940/Asus 24' LED
Case:	Ever Case E4252WSF-F/Antec P280 It's huge!
Sound Card:	SB Audigy 2 ZS/on board
PSU:	Corsair VX550/SeaSonic S12II 620
Software:	XP MCE SP3/Win 7 Home Premiun 64 Bit
Benchmarks:	Are you kidding?/3DMark11 basic P8681

May 4, 2011, 07:22 PM	#135
thebluebumblebee Join Date: Jul 2008 Location: Portland, OR USA Posts: 2,138 (1.20/day) Thanks: 1,556 Thanked 879 Times in 626 Posts System Specs	The stinkers changed terminology on us. Advanced is the one to use

May 4, 2011, 09:38 PM	#137
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,318 Times in 1,150 Posts System Specs	Hey guys! a little help here.. I've got my 970 setup for smp using bigadv.. but does this look right? ETA:2.04 days? Base Credit Unknown, Estimated Credit Unknown, Estimated PPD Unknown, Estimated TPF 35mins 04 secs, Project 2686, FahCore 0xa5... Thanks! __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

May 4, 2011, 09:39 PM	#138
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	it will take some time to claculate the PPD afaik, __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

May 4, 2011, 09:40 PM	#139
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,318 Times in 1,150 Posts System Specs	yea but does "ETA:2.04 days" look right? __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

May 4, 2011, 09:41 PM	#140
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	for one of the big ones? i think so yeah, its pretty time consuming __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

May 4, 2011, 09:42 PM	#141
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,318 Times in 1,150 Posts System Specs	I guess i'll have to stop this one mid way.. to switch over to CC. __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

May 4, 2011, 09:42 PM	#142
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	just wait a sec lol, im not 110% sure, wait for the other guys __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

May 4, 2011, 09:56 PM	#146
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,318 Times in 1,150 Posts System Specs	I plain to have a 480 folding in my 970 tomorrow. EDIT: Got to run guys.. I'll check back here in a few hours. Thanks! __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

May 4, 2011, 10:30 PM	#148
lauri_hoefs Join Date: May 2011 Location: Korpi Posts: 23 (0.03/day) Thanks: 1 Thanked 6 Times in 3 Posts System Specs	Hi! Could someone send me the pass key, please? Thanks

System Name:	15" rMBP, mid 2012 base model
Processor:	Intel Core i7-3615QM
Video Card:	NVIDIA GeForce GT 650M

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

May 4, 2011, 10:51 PM	#150
Birdman86 Join Date: Dec 2008 Posts: 17 (0.01/day) Thanks: 1 Thanked 14 Times in 6 Posts	Hi, I joined the team for Chimp Challenge and here is how my folding is going now: Is all OK, or is there something wrong? Is my SMP PPD low or OK? Looks like I'll only complete three of those WUs during these 10 days if all goes well. Should I add the -verbosity 9? I had to OC and configure clients just in a couple hours. I just crashed a couple times with Prime95 at 4.5 GHz and a bit higher voltage and then ran Prime95 OK for a bit more than one hour at 4.2 GHz. Then I just started folding and OCd GPU a bit while folding. I just have to hope my PC keeps running for at least 11 days without any EUEs. I'd also like to run my GPU at 750/1500, but I'll try that tomorrow when I can watch better whether it works or not. I also have my old Q6600 rig with one GT 8800 (other GT 8800 also available but not installed) that folded all my points when I was folding some years ago. Would that rig still be worth setting up for folding? __________________

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 2010 Chimp Challenge Thread	BUCK NASTY	Folding@Home	822	Jun 2, 2010 04:58 AM
Chimp Challenge Tech Assistance Thread	BUCK NASTY	Folding@Home	115	May 7, 2010 07:23 AM
Fold With TechPowerUp! at The 2010 Chimp Challenge	btarunr	News	14	May 1, 2010 11:23 PM
Chimp Challenge Avatar Thread	BUCK NASTY	Folding@Home	29	Apr 12, 2010 09:47 AM