Your PC ATM - Page 675

LordJummy · Jun 10, 2011, 05:31 PM

Quote:

Originally Posted by mlee49

I'm thinking gottistar's rig is a prebuilt

If that's true I'd like to know who builds that one. Looks very nice.

I don't think it's pre-built honestly. It looks really clean and nice. Usually companies that do prebuilt WC'd setups don't do them quite so perfectly. They always use quick methods unless you pay a lot extra.

**After further inspection of his case gallery, it can't be prebuilt, because there's an older version of this build up. Unless he sent it to a mod shop where they re-did his water cooling.

(FIH) The Don · Jun 10, 2011, 05:54 PM

Quote:

Originally Posted by mlee49

I'm thinking gottistar's rig is a prebuilt

Definately not prebuilt, saw a couple posts ago from the NXZT Clubhouse and he had a crappy AIO WC unit.

Highly suspicisous, -__-

why?

Ross211 · Jun 10, 2011, 07:52 PM

Quote:

Originally Posted by PopcornMachine

I am also still using a UD3P. You can kind of see it here http://www.techpowerup.com/forums/sh...ostcount=16642 after my first successful water cooling setup.

It and the Q6600 are champs. They just keep going.

That loop is insane looking, awesome job

Your tubing makes some fairly tight bends but there is no kinkiness going on

/edit

No clamps ? 7/16'' ID 5/8'' OD Tygon ?

Looks clean, I'd be scared though :~0

PopcornMachine · Jun 10, 2011, 08:33 PM

Quote:

Originally Posted by Ross211

That loop is insane looking, awesome job

Your tubing makes some fairly tight bends but there is no kinkiness going on

/edit

No clamps ? 7/16'' ID 5/8'' OD Tygon ?

Looks clean, I'd be scared though :~0

Thanks very much. And you are the first to notice I have no clamps.

The XPS kit came with 7/16" tubing and 1/2" fittings. So I got the same size in blue Primo Chill from Micro Center.

The good part is that it fits so snug when put on correctly I don't need clamps. I literally have to cut them off. I made sure each leg was positioned and long enough to prevent kinking, and so I can slide out the reservoir. But I should shorten the tube from the CPU to the GPU as it is causing the card to sag a bit.

I would like to redo it with compression fittings which seem like a better design and would make it easier to make changes.

DanishDevil · Jun 10, 2011, 08:37 PM

I love 7/16' ID tubing on 1/2" barbs

I used to run DTEK 1/2" barbs and Tygon R-3603 7/16" ID tubes and I could grab my loop by the block and swing it around my head with the pump and 2x120mm radiator on while the loop was full of water.

(FIH) The Don · Jun 10, 2011, 08:38 PM

compression fittings LOOK nice imo
but they tend to leak, especially the turnable ones

but barbs with clamps or zippies are better. atleast thats what i found out the hard way

PopcornMachine · Jun 10, 2011, 09:06 PM

Thanks guys. Maybe I should stick with what I have. It's been over a month now and not a drop. Zip ties sound like a nice economical precaution however.

That of course is if you push them completely on the barb correctly. I also found out the hard way what happens if you don't.

(FIH) The Don · Jun 10, 2011, 09:13 PM

yep, it can be a very expensive lesson with wc if you're not carefull, or if the stuff is broken

i lost 2 gtx-275s, i7 920, mb, and a ax850w psu on that account

but i had 75% covered by the company i bought the wc stuff from

gottistar · Jun 10, 2011, 09:37 PM

Quote:

Originally Posted by mlee49

I'm thinking gottistar's rig is a prebuilt

Definately not prebuilt, saw a couple posts ago from the NXZT Clubhouse and he had a crappy AIO WC unit.

Highly suspicisous, -__-

Its defiantly not pre-built

i have pics of it at "extreme overclockers" i posted a few pics of it just 2 days ago , the post was a semi build log of the H20 unit i just finished hence the pictures......and yeh who-ever mentioned it was posted on the case mod gallery with a crappy WC unit..your right....and yeh its on the NXZT Clubhouse

here are some of the pics of the WC build a few days back.

Quote:

Originally Posted by (FIH) The Don

compression fittings LOOK nice imo
but they tend to leak, especially the turnable ones

but barbs with clamps or zippies are better. atleast thats what i found out the hard way

im a big fan of compression fittings, i was converted from barbs...if screwed properly, there shouldn't be a any dramas....

even thou in the pic i have a few clamps and barbs shown...i ordered the parts online at night , went to pick them up in the morning from , i wont mention any names (pc *cough* casegear) and they were out of stock of compression fittings.......ggrrr....either way the build had to go on.......

Here is a high rez pic.....i moved the rad 120 ml LED fan to the side for some more light near the CPU block..

WhiteNoise · Jun 11, 2011, 08:08 AM

Looks nice Gott.

Lionheart · Jun 11, 2011, 08:40 AM

Quote:

Originally Posted by gottistar

Its defiantly not pre-built

i have pics of it at "extreme overclockers" i posted a few pics of it just 2 days ago , the post was a semi build log of the H20 unit i just finished hence the pictures......and yeh who-ever mentioned it was posted on the case mod gallery with a crappy WC unit..your right....and yeh its on the NXZT Clubhouse

here are some of the pics of the WC build a few days back.

http://i323.photobucket.com/albums/n...r/IMG_5225.jpg
http://i323.photobucket.com/albums/n...tistar/pc1.jpg
http://i323.photobucket.com/albums/n...tistar/pc5.jpg
http://i323.photobucket.com/albums/n...tistar/pc4.jpg

im a big fan of compression fittings, i was converted from barbs...if screwed properly, there shouldn't be a any dramas....

even thou in the pic i have a few clamps and barbs shown...i ordered the parts online at night , went to pick them up in the morning from , i wont mention any names (pc *cough* casegear) and they were out of stock of compression fittings.......ggrrr....either way the build had to go on.......

Here is a high rez pic.....i moved the rad 120 ml LED fan to the side for some more light near the CPU block..
http://i323.photobucket.com/albums/n...r/IMG_5256.jpg

I just jizzed at the last pic

Very nice looking rig there man

spectrus77 · Jun 11, 2011, 03:22 PM

Hello guys. I want to show my new hiding cables, custom I just did, I liked what they found?

IINexusII · Jun 11, 2011, 03:26 PM

Quote:

Originally Posted by gottistar

Here is a high rez pic.....i moved the rad 120 ml LED fan to the side for some more light near the CPU block..
http://i323.photobucket.com/albums/n...r/IMG_5256.jpg

great shot

i like how you placed the ROG sticker on the PSU

PopcornMachine · Jun 11, 2011, 03:39 PM

Quote:

Originally Posted by spectrus77

Hello guys. I want to show my new hiding cables, custom I just did, I liked what they found?

http://img832.imageshack.us/img832/759/dscf0587q.jpg
http://img689.imageshack.us/img689/6898/dscf0591le.jpg
http://img828.imageshack.us/img828/3057/dscf0593u.jpg

Very nice.

Luciel · Jun 11, 2011, 06:54 PM

The Current state of my set up, been like that for a week or so now since I finished the project : )

Luciel · Jun 11, 2011, 06:55 PM

EDIT: Wups, double post, my bad.

uzuhl · Jun 11, 2011, 08:34 PM

Quote:

Originally Posted by Luciel

http://a4.sphotos.ak.fbcdn.net/hphot..._5026868_n.jpg

The Current state of my set up, been like that for a week or so now since I finished the project : )

Think you have enough icons in your taskbar there, bud?

Nice rig

theJesus · Jun 11, 2011, 08:46 PM

Quote:

Originally Posted by uzuhl

Think you have enough icons in your taskbar there, bud?

Nope, there's still a gap in the middle.

edit: nvm, the speaker is just in the way lol

gottistar · Jun 11, 2011, 09:30 PM

Quote:

Originally Posted by IINexusII

great shot

i like how you placed the ROG sticker on the PSU

yeh cheers mate, thought it was a good idea myself **pats self on back**

cadaveca · Jun 11, 2011, 10:26 PM

eyefinity?

dom99 · Jun 12, 2011, 12:20 AM

Quote:

Originally Posted by Volkszorn88

This is the best that I could do. There's about an inch, maybe a tad bit more of room behind the motherboard.
http://i53.tinypic.com/2872cnk.jpg
For an $80 case, it's worth it.

I have this case built it 2 days ago and its great, however im not into the flashing lights look so I chopped the LEDs off the fans. But this does look VERY good lol starting to regret lol

PopcornMachine · Jun 12, 2011, 05:36 AM

Quote:

Originally Posted by cadaveca

eyefinity?

http://www.techpowerup.com/forums/at...1&d=1307831129

http://www.techpowerup.com/forums/at...1&d=1307831130

So, are those the 3x Dell P2310H?

How's eyefinity working for games?

cadaveca · Jun 12, 2011, 06:13 AM

Quote:

Originally Posted by PopcornMachine

So, are those the 3x Dell P2310H?

Yes, exactly

Quote:

How's eyefinity working for games?

Better than it used to. 2x 6950 with unlocked shaders @ 850/1325 is still not enough though, so back to single monitor for me.

I've got u2311's, too, tried both. Don't think the wife's into moving shit around any more.

pantherx12 · Jun 12, 2011, 06:55 AM

Quote:

Originally Posted by cadaveca

Yes, exactly

Better than it used to. 2x 6950 with unlocked shaders @ 850/1325 is still not enough though, so back to single monitor for me.

I've got u2311's, too, tried both. Don't think the wife's into moving shit around any more.

Is it the mouse flicker issue and such like or frame rates?

Luciel · Jun 12, 2011, 12:43 PM

Quote:

Originally Posted by uzuhl

Think you have enough icons in your taskbar there, bud?

Nice rig

You can never have to many icosns OFF the desktop ; )

Thanks!

Quote:

Originally Posted by cadaveca

eyefinity?

http://www.techpowerup.com/forums/at...1&d=1307831129

http://www.techpowerup.com/forums/at...1&d=1307831130

How does it go for you? I also run 3x 22" but on matrox triplehead as opposed to eyefinity.

System Name:	Workstation1 \| Asus G55VW-DS71
Processor:	i7 970 3.8GHz \| i7 3610QM
Motherboard:	RIII Formula
Cooling:	EK 360 Supreme HF \| Asus G55VW
Memory:	24GB Dominator \| 12GB DDR3
Video Card:	2x Diamond HD 6970 \| GTX 660M
Hard Disk:	2x Vertex4 256GB \| 256GB Vertex4 & 750GB HDD
Optical Drive:	Samsung DVDRW + Asus BDRW
CRT/LCD Model:	3x Crossover 27" LED S-IPS + 30" DELL IPS
Case:	Corsair Obsidian 800D
Sound Card:	X-Fi Titanium Fatal1ty Pro + Gigaworks G550W
PSU:	HX1000 + NZXT Black Sleeved Extensions
Software:	Win7Ult64Bit
Benchmarks:	ballz

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

System Name:	Ruh Roh
Processor:	Intel Core i5 2500K @ Stock, she'll do 5.
Motherboard:	Asus P8Z68-V PRO/GEN3
Cooling:	Cooler Master Hyper 212 with 2x 120MM PWM in Push/Pull
Memory:	2x4GB Corsair XMS3 DDR3 1333
Video Card:	EVGA GTX 570 1280MB
Hard Disk:	OCZ Agility 3 120GB SSD / WD Black 500GB /~2TB SATA JBOD
Optical Drive:	Sony NEC SATA DVD-RW
CRT/LCD Model:	Yamakasi Catleap @ 2560x1440 & Dell U2211H @ 1920x1080
Case:	Corsair Carbide 300R
Sound Card:	NuForce uDAC-2 w/ Klipsch Promedia 2.1 & Sennheiser HD595
PSU:	Corsair AX850 - Razr Black Widow Mechanical Keyboard w/ Logitech MX518 Rev. 1
Software:	Windows 7 Pro x64 / Ubuntu
Benchmarks:	Asus X53e Notebook - Core i3 2310M, 8GB DDR3, 60GB OCZ S2 SSD, No gaming, just Notepad++ :~D

System Name:	Green-Blooded Vulcan
Processor:	I5 2500K @ 4.6 GHz
Motherboard:	Asus Maximus Gene-Z
Cooling:	XSPC Rasa 750 RS240 Kit & EK 6970 Water Block
Memory:	G.Skill 8GB DDR3 1600
Video Card:	Sapphire HD 6950 (900/1400)
Hard Disk:	Samsung Spinpoint F3 1TB
Case:	NZXT Vulcan
Sound Card:	On Board
PSU:	CORSAIR 650HX
Software:	Win 7 64-bit

Jun 10, 2011, 08:37 PM	#16855
DanishDevil Eligible for custom title Join Date: Oct 2005 Location: Newport Beach, CA Posts: 8,633 (3.07/day) Thanks: 1,366 Thanked 2,018 Times in 1,585 Posts System Specs	I love 7/16' ID tubing on 1/2" barbs I used to run DTEK 1/2" barbs and Tygon R-3603 7/16" ID tubes and I could grab my loop by the block and swing it around my head with the pump and 2x120mm radiator on while the loop was full of water. __________________ [B/S/T: FS/FT Cisco VPN Gigabit Routers \| WTB] [Logitech Z-5500 Digital Soundroom \| The TPU Darkroom \| The TPU Zune Social \| Tech Net Subscribers Club]

System Name:	Big Devil
Processor:	Intel Core i5 2500K @ 4GHz
Motherboard:	ECS P67H2-A2
Cooling:	XSPC Rasa \| Black Ice GT Stealth 240 \| XSPC X2O 750 \| 2x ACF12PWM \| PrimoChill White 7/16"
Memory:	2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card:	EVGA GTX 680 w/ Hi-Flow Bracket
Hard Disk:	Intel 520 Series 180GB + WD 1TB Blue
Optical Drive:	Samsung DVD Burner
CRT/LCD Model:	HP ZR30W 30" 2650x1600 IPS
Case:	Corsair 600T SE
Sound Card:	Xonar Essence STX \| Logitech Z-580 \| Sennheisser PC350 "Hero" Modded \| Sennheisser HD 280 Pro
PSU:	ABS SL 1050W (Enermax Revolution Rebadge)
Software:	Windows 7 Ultimate x64
Benchmarks:	Ducky Year of the Tiger w/ Cherry MX Browns \| Razer Deathadder Black Edition \| Razer Destructor

Jun 10, 2011, 08:38 PM	#16856
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,407 (3.84/day) Thanks: 3,101 Thanked 2,970 Times in 1,835 Posts System Specs	compression fittings LOOK nice imo but they tend to leak, especially the turnable ones but barbs with clamps or zippies are better. atleast thats what i found out the hard way __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Jun 10, 2011, 09:06 PM	#16857
PopcornMachine Join Date: Aug 2009 Location: Los Angeles/Orange County CA Posts: 1,144 (0.82/day) Thanks: 2,028 Thanked 383 Times in 308 Posts System Specs	Thanks guys. Maybe I should stick with what I have. It's been over a month now and not a drop. Zip ties sound like a nice economical precaution however. That of course is if you push them completely on the barb correctly. I also found out the hard way what happens if you don't.

Jun 10, 2011, 09:13 PM	#16858
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,407 (3.84/day) Thanks: 3,101 Thanked 2,970 Times in 1,835 Posts System Specs	yep, it can be a very expensive lesson with wc if you're not carefull, or if the stuff is broken i lost 2 gtx-275s, i7 920, mb, and a ax850w psu on that account but i had 75% covered by the company i bought the wc stuff from __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	White noise
Processor:	i7 930 @ 4.312--1.32v
Motherboard:	ASUS Rampage III Extreme
Cooling:	H20 custom/EK/swiftech
Memory:	Kingston DDR3 2000mhz hyper X 12 gigs
Video Card:	6870 x2 AMD gigabyte in xfire
Hard Disk:	main OCZ Agilty 3 / 2nd HD 1tb
Optical Drive:	LG dvd
CRT/LCD Model:	30inch lcd samsung 305t
Case:	NZXT Phantom Case White
Sound Card:	onboard
PSU:	OCZ Technology ZX Series 1250W
Software:	windows 7 ultimate
Benchmarks:	28400 3D vantage

Jun 11, 2011, 08:08 AM	#16860
WhiteNoise Join Date: Feb 2009 Location: Riverside, CA Posts: 964 (0.61/day) Thanks: 157 Thanked 200 Times in 150 Posts System Specs	Looks nice Gott. __________________ PS3 Fat 120GB // PS3 Slim 250GB // XBOX 360 Elite 120GB // XBOX 360 4GB w/ Kinect EK-Supreme HF - Full Nickel - Rev 2 // Swiftech MCP655-B // Danger Den Reservoir // XSPC RX480 Quad 120mm Radiator // Bitspower True Silver & Enzotech fittings // DangerDen Tube Active UV Hose // (4x) Scythe Gentle Typhoon 120mm Fan, 1850 RPM

Processor:	Intel Core i5 2500K @ 4.7GHz
Motherboard:	MSI P67A-GD65 B3
Cooling:	Custom Water loop
Memory:	Corsair Vengeance DDR3 8GB (2x4GB)1600MHz
Video Card:	XFX Radeon HD 6970 2GB
Hard Disk:	Intel X25-M G2 80GB SSD // W.D.Velociraptor 10k 300GB // Seagate Barracuda 500GB // 1TB
Optical Drive:	Samsung 22x DVD Burner SH-S223F
CRT/LCD Model:	Samsung Series 6000 40" LED LCD
Case:	ThermalTake Level 10 GT
Sound Card:	Creative X-Fi to Harman/Kardon 3490 to Hsu HB-1 MK2 speakers & Velodyne CT-150 sub
PSU:	Corsair TX850W
Software:	Windows 7 Ultimate 64 bit

System Name:	I'm Thirsty!
Processor:	i7 970 @ 4Ghz Hyperthreading On
Motherboard:	ASUS X58 Rampage II Extreme Motherboard
Cooling:	Noctua D14 \|\| 3x200m 1x 230mm 4x 140mm 2x 120mm fans
Memory:	12GB G-Skill Sniper Running @ 1600Mhz 9,9,9,24
Video Card:	HIS HD7950 3GB Overclocked @ 1000Mhz / 1400Mhz
Hard Disk:	Corsair FS3 120GB SSD \|\| 2TB WD Black Caviar HDD
Optical Drive:	LG 10x speed Blu-ray Burner (I never use it)
CRT/LCD Model:	27inch LG Flatron E2742 1920x1080
Case:	Coolermaster HAF X Full Tower Case
Sound Card:	SupremeFX X-Fi Sound Card
PSU:	Corsair HX1000W Modular PSU
Software:	Windows 7 Home Premium 64bit
Benchmarks:	Gaming \|\| HD Movies \|\| Music \|\| Pictures \|\| Net

Jun 11, 2011, 03:22 PM	#16862
spectrus77 Join Date: Aug 2010 Posts: 24 (0.02/day) Thanks: 25 Thanked 149 Times in 36 Posts System Specs	Hello guys. I want to show my new hiding cables, custom I just did, I liked what they found?

System Name:	Spectrus
Processor:	Intel 2500K
Motherboard:	AsRock Z68 Extreme 4 Gen 3
Cooling:	Corsair H100
Memory:	Kingston Hyper X PnP
Video Card:	Asus GTX670 DCT
Hard Disk:	SSD Corsair F3 60 + 2x WD Caviar Blue
CRT/LCD Model:	LG 32ld460
Case:	Corsair Obsidian 650D
Sound Card:	Realtek Alc889
PSU:	Antec TP750
Software:	W7 64Bits

System Name:	Fortress Black Edition
Processor:	AMD Phenom II X6 1090T Black Edition
Motherboard:	Gigabyte 990FXA-UD3
Cooling:	Be Quiet Dark Rock Pro 2
Memory:	Samsung Green 16GB (4x4GB) 30nm 1600Mhz DDR3
Video Card:	XFX HD 7950 Double Dissipation 3GB @ 900/5500Mhz
Hard Disk:	240GB Intel 520 SSD + 1TB Samsung F3
CRT/LCD Model:	Samsung P2450H 24" LCD
Case:	Silverstone Fortress FT01B-W
PSU:	Corsair HX750W
Software:	Windows 7 Professional 64Bit

Jun 11, 2011, 06:54 PM	#16865
Luciel Join Date: May 2011 Location: Málaga, Spain Posts: 228 (0.30/day) Thanks: 16 Thanked 115 Times in 61 Posts	The Current state of my set up, been like that for a week or so now since I finished the project : )

Jun 11, 2011, 06:55 PM	#16866
Luciel Join Date: May 2011 Location: Málaga, Spain Posts: 228 (0.30/day) Thanks: 16 Thanked 115 Times in 61 Posts	EDIT: Wups, double post, my bad. Last edited by Luciel; Jun 11, 2011 at 07:02 PM.

System Name:	The Beast
Processor:	Intel Core 2 Quad Q6600 @2.89Ghz
Motherboard:	ASUS p5q-em DO
Cooling:	7 fans. 2 top, 1 side, 1 bottom, 1 front, 1 back, 2 CPU.CPU Cooler: CM Hyper 212 Plus
Memory:	8GB Patriot Memory 4x2GB DDR2 PC2-6400 5-5-5-12 PGS24G6400ELK
Video Card:	EVGA GTX 460 1024 MB GDDR5
Hard Disk:	2-320 HITACHI, 1-1TB SAMSUNG, 1-500gb
Optical Drive:	OEM 24x DVD writer
CRT/LCD Model:	AOC 2436VW 24" 1920x1080
Case:	Rosewill Destroyer (hoping for CM HAFX)
Sound Card:	onboard
PSU:	Rocketfish 500watt(600watt peak)
Software:	Windows 7 Ultimate 64 bit
Benchmarks:	5120 FPS 1080p FurMark

System Name:	BEHEMOTH
Processor:	Intel Core i5 2500-K @ 4.6ghz
Motherboard:	ASUS P8Z68-V
Cooling:	Corsair Hydro H100
Memory:	2x4gb Corsair Vengeance DDR3 1600 9-9-9-24 1.5v
Video Card:	EVGA GTX 560 Ti SuperClocked 950/1900/2100 core/shader/mem
Hard Disk:	Hitachi Deskstar 7K3000 2TB (OS/pro) \|\| 2x SAMSUNG EcoGreen F2 1.5TB RAID0 (storage)
Optical Drive:	Sony Optiarc AD-7240S-0B
CRT/LCD Model:	Samsung SyncMaster 2343BWX @2048x1152
Case:	Antec P280
Sound Card:	HRT MusicStreamer II+
PSU:	SeaSonic X650 Gold
Software:	Win7 Ultimate x64

Jun 11, 2011, 10:26 PM	#16870
cadaveca My name is Dave Join Date: Apr 2006 Location: The Great White North Posts: 10,932 (4.16/day) Thanks: 4,718 Thanked 5,464 Times in 3,308 Posts System Specs	eyefinity? Attached Thumbnails __________________ Gadgets, Phones, Tablets, Cameras, TVs, HiFi...NextPowerUp -Only real men play games THIS way.

System Name:	Eyefinity Gamer
Processor:	Intel i5 3570K @ 4.6 GHz
Motherboard:	ASUS Maximmus V Formula
Cooling:	Corsair H100
Memory:	16 GB G.Skill F3-2666C11Q-16GTXD
Video Card:	AMD Radeon HD7950 3GB x2 w/AMD Catalyst 12.10
Hard Disk:	OCZ Nocti 60GB mSATA, Crucial M4 120GB x2
Optical Drive:	LG BluRay/HD-DVD
CRT/LCD Model:	3x Dell U2412M
Case:	LianLi T60
Sound Card:	N/A
PSU:	Silverstone Strider 750W GOLD
Software:	Windows 8 Pro
Benchmarks:	Benchmarking is for suckers. ;)

System Name:	Panther's PC
Processor:	FX8120 4.5 ghz + 0.125 volts over stock
Motherboard:	Gigabyte 990fxa ud3
Cooling:	Ek Supreme, Coolingking Tripple Thick Copper Radiator
Memory:	Hyperx 4x2gb 1600mhz
Video Card:	460 768mb : [
Hard Disk:	WD blue 500gb
CRT/LCD Model:	AOC HD
Case:	Mountain Mods U2-UFO
Sound Card:	Audigy z2
PSU:	Powercool 750w modular PSU ( GAMBLING YAY!)
Software:	Windows SEVEN
Benchmarks:	Pffft benchmarking for me is for the lulz only!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the best ATi Graphics card atm?	kebabs	AMD / ATI	10	Dec 23, 2008 12:59 PM
Jericho: anyone playing this atm?	HookeyStreet	Games	6	Oct 27, 2007 11:37 PM
[FS \| FT \| WTB] : PC Hardware - Wireless K&M + USB Media Card Readers + Various Stuff	Sovereign	Buy/Sell/Trade/Giveaway Forum	11	Mar 5, 2007 01:24 AM