Your PC ATM

[brandonwh64]

Das, your case looks very old and rusted HAHA

[de.das.dude]

its 4 years old mate. and its very humid here.

[[H]@RD5TUFF]

Originally Posted by de.das.dude

its 4 years old mate. and its very humid here.

time to upgrade

[Krony]

Thx for the comments, the monitor is a good one and if i could get hold of 2 more i would but as mentioned they don't make em anymore so i have been looking at going down the 30" 2560x1600 route.

[PopcornMachine]

Originally Posted by Krony

Thx for the comments, the monitor is a good one and if i could get hold of 2 more i would but as mentioned they don't make em anymore so i have been looking at going down the 30" 2560x1600 route.

I would love to go eyefinity or 2560x1600, but both too expensive.


And about that case. They call that a Little Devil? I'd hate to see the big one.

[Krony]

Maybe the name is because everything next to it looks little ? :P

[DanishDevil]

The guy who makes them has the online alias LittleDevil. I've seen a lot of build logs of his work, really top-notch stuff.

Lookin' good man! And I thought an 800D was big, hah I should show my boss.

[micropage7]

you have pretty tight space on that

[micropage7]

looks clean how many times you clean it
btw.. you dont use dust filter at all? it must attract alot of dust

[de.das.dude]

Originally Posted by micropage7

you have pretty tight space on that
http://a8.sphotos.ak.fbcdn.net/hphot...88858914_n.jpg

i know. thats why i love working on that! :3

[Cold Storm]

Originally Posted by de.das.dude

i know. thats why i love working on that! :3

Yeah... there needs to be some "help" for you.. or.... I think I need that "help" that I'm suggesting...

[1nf3rn0x]

New laptop I bought.

Hehehe, sorry for the photos in an awkard place. It's 1am here and I didn't want to wake up everyone!
And, you can see me and how young I am in the reflection!

[micropage7]

Originally Posted by de.das.dude

i know. thats why i love working on that! :3

i guess your case is smaller that usual mid tower. mine still has enough space to put 120mm fan on the top

its between the psu and optical drive

[Krony]

Originally Posted by micropage7

http://img12.imageshack.us/img12/5738/bothpanelsoff.jpg
looks clean how many times you clean it
btw.. you dont use dust filter at all? it must attract alot of dust

I opted for no filters as to not restrict airflow, as for cleaning a quick blast of canned air once a week is enough to keep things clean, i might consider adding some of these filters as they are pretty much non restrictive.

[de.das.dude]

Originally Posted by Cold Storm

Yeah... there needs to be some "help" for you.. or.... I think I need that "help" that I'm suggesting...

i only have a rotary tool. no cutting disks, and a file to work with. you bet i need help.

[de.das.dude]

Originally Posted by micropage7

i guess your case is smaller that usual mid tower. mine still has enough space to put 120mm fan on the top
http://www.techpowerup.com/forums/at...4&d=1310181938
its between the psu and optical drive

nice clean cut. looks like u used a jigsaw? i wish i could buy one.

[ChaoticAtmosphere]

Originally Posted by 1nf3rn0x

http://img.techpowerup.org/110924/IM...925_003652.jpg

http://img.techpowerup.org/110924/IM...925_003707.jpg

http://img.techpowerup.org/110924/Capture098.jpg



And, you can see me and how young I am in the reflection!

Nice shirt! and peel off the plastic from your new lappy's (congrats btw) screen already!!! I have a friend who bought a smart phone and he never removed the plastic for like 3 months and he would never do it when I told him too. So I did it for him one evening when we were having a few beers - while he was in the toilet!

[micropage7]

Originally Posted by de.das.dude

nice clean cut. looks like u used a jigsaw? i wish i could buy one.

not, i used nail and hammer to cut that
old school way
not pretty neat but enough to make my temp lower little bit

[micropage7]

Originally Posted by Krony

I opted for no filters as to not restrict airflow, as for cleaning a quick blast of canned air once a week is enough to keep things clean, i might consider adding some of these filters as they are pretty much non restrictive.

yeah but its too cool to hide inside your rig

[Krony]

Originally Posted by micropage7

yeah but its too cool to hide inside your rig
http://www.demcifilter.com/data/file...r/22/img_6.png

Was looking at the metalic smooth chrome ones and they will be going on the outside

[15th Warlock]

Finally got my Corsair H100 yesterday! Stayed up until 3am installing everything



Here's a close up of the cooler, I'm using a push'n pull setup, just added the fans from my old H70 to the 240mm radiator:



Here's a quick test for temps before installation, with my old H70, the CPU is running at 4.5Ghz @ 1.29V




Now, here's a run with the H100 immediately after installation, dunno if Corsair ir still using Shin Etsu for the pre-applied TIM, but I decided not to change it for now, I believe it may need some more setting time, but, anyways, here're the results:



I'll wait a few days and see if the TIM performance improves over time, if not I can either replace it with Coolaboratory Liquid Ultra Metal, or Arctic MX-4, what do you guys recommend?

[1nf3rn0x]

Originally Posted by ChaoticAtmosphere

Nice shirt! and peel off the plastic from your new lappy's (congrats btw) screen already!!! I have a friend who bought a smart phone and he never removed the plastic for like 3 months and he would never do it when I told him too. So I did it for him one evening when we were having a few beers - while he was in the toilet!

Removed plastic.
Hahah, your friend must of gotten of out the toilet and been like



Shirt is Henleys btw xD

[mlee49]

Originally Posted by 15th Warlock

Finally got my Corsair H100 yesterday! Stayed up until 3am installing everything

http://img.techpowerup.org/110924/IMG_2249.jpg

Here's a close up of the cooler, I'm using a push'n pull setup, just added the fans from my old H70 to the 240mm radiator:

http://img.techpowerup.org/110924/DSC09689.jpg

Here's a quick test for temps before installation, with my old H70, the CPU is running at 4.5Ghz @ 1.29V

http://img.techpowerup.org/110924/Temp h70.jpg


Now, here's a run with the H100 immediately after installation, dunno if Corsair ir still using Shin Etsu for the pre-applied TIM, but I decided not to change it for now, I believe it may need some more setting time, but, anyways, here're the results:

http://img.techpowerup.org/110924/Temp h100 max.jpg

I'll wait a few days and see if the TIM performance improves over time, if not I can either replace it with Coolaboratory Liquid Ultra Metal, or Arctic MX-4, what do you guys recommend?

I love your setup, amazing! Care to show off the rest? Monitor setup, gaming room maybe?

MX4 is great but a bit hard to spread. I'd suggest Gelid's extreme stuff great performance and really easy to spread.

[15th Warlock]

Originally Posted by mlee49

I love your setup, amazing! Care to show off the rest? Monitor setup, gaming room maybe?

MX4 is great but a bit hard to spread. I'd suggest Gelid's extreme stuff great performance and really easy to spread.

Thanks for your reply I have never tried Gelid's TIM, I used MX-4 for my H70, and as you can see the temp delta between my previous cooler and the H100 with the pre-applied TIM isn't that big, dunno if Corsair still uses Shin Etsu, but I may order some of the Gelid goo to give it a try, thanks for the advice mate

I had uploaded pics from my office before, it's not much of a gaming room setup, but it's more relaxing for gaming and browsing the net, here's my office:





I apologize for the cable mess , gotta work on that , Here's a pic from my gaming room setup I had uploaded previously, that's where I keep my HTPC:



Hope you like it

[mlee49]

Excuse me while I pick my face up off the floor.





Can I come to your house to play?
Seriously nice work man, probably top 10 setups I've seen here.