HyperSLI (Enabling SLI on non-sli motherboards) - Page 4

hhumas · Oct 5, 2011, 02:16 AM

installing .. i have asus p5w dh delux

snipe · Oct 5, 2011, 02:17 AM

I can run BF3 no flicker, something isn't right.

anatolymik · Oct 5, 2011, 02:39 AM

Quote:

Originally Posted by tinytiger

My system: windows7 x64

it was under normal windows? or under HyperSLI?

antandshell · Oct 5, 2011, 02:39 AM

seems all is not well...my first blue screen with the new hypersli. anatolymik can you read it and tell me what you think?

anatolymik · Oct 5, 2011, 02:41 AM

Quote:

Originally Posted by antandshell

seems all is not well...my first blue screen with the new hypersli. anatolymik can you read it and tell me what you think?

when you get the BSOD?

tinytiger · Oct 5, 2011, 02:46 AM

Quote:

Originally Posted by anatolymik

it was under normal windows? or under HyperSLI?

under HyperSLI

anatolymik · Oct 5, 2011, 02:46 AM

Quote:

Originally Posted by tinytiger

under HyperSLI

so what do you want? you have HyperSLI works ok.

tinytiger · Oct 5, 2011, 02:49 AM

Quote:

Originally Posted by anatolymik

so what do you want? you have HyperSLI works ok.

oh,I see,thank you very much !

anatolymik · Oct 5, 2011, 02:50 AM

Quote:

Originally Posted by anatolymik

BE AWARE. HyperSLI hide Virtualization Technology supporting. For example, CPU-Z utility never show VT-x for Intel processors under HyperSLI.

i mentioned that in first message

anatolymik · Oct 5, 2011, 02:56 AM

Quote:

Originally Posted by antandshell

seems all is not well...my first blue screen with the new hypersli. anatolymik can you read it and tell me what you think?

you sure your system stable?

antandshell · Oct 5, 2011, 03:03 AM

Playing driver sanfransisco hypersli beta drivers was working ok till then

Quote:

Originally Posted by anatolymik

when you get the BSOD?

tinytiger · Oct 5, 2011, 03:05 AM

So I can't use winxp mode under HyperSLI?

anatolymik · Oct 5, 2011, 03:08 AM

Quote:

Originally Posted by tinytiger

So I can't use winxp mode under HyperSLI?

No. I need to make emulating virtualization technology. But there is a lots of work. First of all. I'll make supporting for all processors.

Lance141 · Oct 5, 2011, 03:09 AM

bf3 worked great with slipatch 1.5 + modded driver

i did more test and look like other game run fine. hypersli is working great !

the problem look like to be only with bf3

Quote:

Originally Posted by anatolymik

if you would use modded driver do you have BF3 ok? what about rest games?

anatolymik · Oct 5, 2011, 03:10 AM

Quote:

Originally Posted by antandshell

Playing driver sanfransisco hypersli beta drivers was working ok till then

what do you mean by "Playing driver sanfransisco hypersli beta drivers"
go to windows\system32 (use windows explorer) and find there halsli.dll file. send it to me.
you system is stable?

anatolymik · Oct 5, 2011, 03:12 AM

Quote:

Originally Posted by Lance141

bf3 worked great with slipatch 1.5 + modded driver

i did more test and look like other game run fine. hypersli is working great !

the problem look like to be only with bf3

please try next
1) Again slipatch 1.5 + modded drivers
2) HyperSLI + modded drivers
3) And again HyperSLI + unmodded drivers

antandshell · Oct 5, 2011, 04:06 AM

Its the game i was playing when i bsod. file is attached... System is stable, no bsod in a long long time.Thank you for your time,,,

Quote:

Originally Posted by anatolymik

what do you mean by "Playing driver sanfransisco hypersli beta drivers"
go to windows\system32 (use windows explorer) and find there halsli.dll file. send it to me.
you system is stable?

Slizzo · Oct 5, 2011, 04:31 AM

Works good for me so far. Updated my SLIPatch 1.5b to HyperSLI 0.1, left nVidia 285.38 modded drivers in.

BF3 runs as well as it did before.

Once an official driver package comes out I'll be able to tell definitively if it works without modded drivers; but I suspect that all will be well.

Thanks anatolymik!

anatolymik · Oct 5, 2011, 04:34 AM

Quote:

Originally Posted by antandshell

Its the game i was playing when i bsod. file is attached... System is stable, no bsod in a long long time.Thank you for your time,,,

let me know when you get BSOD again

juanchacin · Oct 5, 2011, 05:00 AM

Hi anatolymik what do you think about this color schemes for the sistem tray icon.

BTW. Awesome work with HyperSLI

anatolymik · Oct 5, 2011, 06:13 AM

antandshell dump file tells that probably it was hardware issue. But i think there is a chance to Hypervising fault. If it is, so there is software legitimacy. You can cause the issue in any time if you find it. Try to recall what exactly software was working before BSOD.

CheckM8 · Oct 5, 2011, 08:30 AM

HyperSLI working fine with 280.26 drivers on a Gigabyte GA-EP45-UD3P (v1.1), 2 x 9800 GX2 and Q9550.

rudey61 · Oct 5, 2011, 10:27 AM

I would firstly like to thank the dev team for working on this. It has been hard for you guys I WOULD LOVE TO GIVE A VERY BIG THANK YOU TO EVERYONE OF YOU!

HyperSLI is working for me on

Gigabyte P67A-UD3R
i5-2500
MSI GTX 460 Hawk/ Palit GTX 460 Sonic Platinum OC
Seasonic 620 W 80+ Bronze
12 GB Team Elite

THANKS ANATOLY and TEAM!!!

phoen · Oct 5, 2011, 10:50 AM

Quote:

Originally Posted by rudey61

I would firstly like to thank the dev team for working on this. It has been hard for you guys I WOULD LOVE TO GIVE A VERY BIG THANK YOU TO EVERYONE OF YOU!

HyperSLI is working for me on

Gigabyte P67A-UD3R
i5-2500
MSI GTX 460 Hawk/ Palit GTX 460 Sonic Platinum OC
Seasonic 620 W 80+ Bronze
12 GB Team Elite

THANKS ANATOLY and TEAM!!!

first pci-e is x16 and second is x4, you don't have saturation ?

amine4ever · Oct 5, 2011, 11:07 AM

Whats the difference between slipatch and hypersli?

System Name:	Hhumas-PC
Processor:	Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz (4 CPUs), ~3.0GHz
Motherboard:	Asus P5W DH Deluxe
Cooling:	ZALMAN CNPS 9700 NT 110mm 2 Ball Ultra Quiet
Memory:	OCZ Platinium 2x2GB
Video Card:	ZOTAC GeForce GTX 680 2GB 256-bit GDDR5
Hard Disk:	WD Green 500 GB , WD 500 GB
Optical Drive:	None
CRT/LCD Model:	Dell U2410F
Case:	Casecom
Sound Card:	Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
PSU:	Corsair HX1000
Software:	Windows 7 Ultimate 32 Bit

Processor:	Qx9650
Motherboard:	Ga-EP45-UD3P
Cooling:	Corsair H80
Memory:	Corsair Dominator
Video Card:	GTX 560TI x2
Hard Disk:	Raptors
Optical Drive:	LG
PSU:	Antec 750 Gamer Edition

Processor:	Qx9650
Motherboard:	Ga-EP45-UD3P
Cooling:	Corsair H80
Memory:	Corsair Dominator
Video Card:	GTX 560TI x2
Hard Disk:	Raptors
Optical Drive:	LG
PSU:	Antec 750 Gamer Edition

Processor:	intel e8400 @ 3650MHz
Motherboard:	asus p5q deluxe
Cooling:	tuniq tower 120
Memory:	kingston hyper x 2x2gb
Video Card:	2 x bfg gtx 280
Hard Disk:	2 x raptor 150
Case:	thermaltake armor jr
Sound Card:	creative x-fi extreme music
PSU:	corsair tx 750w
Software:	windows 7 x64

Processor:	Qx9650
Motherboard:	Ga-EP45-UD3P
Cooling:	Corsair H80
Memory:	Corsair Dominator
Video Card:	GTX 560TI x2
Hard Disk:	Raptors
Optical Drive:	LG
PSU:	Antec 750 Gamer Edition

Oct 5, 2011, 02:16 AM	#76
hhumas Join Date: Jun 2011 Location: Islamabad Posts: 529 (0.75/day) Thanks: 170 Thanked 22 Times in 13 Posts System Specs	installing .. i have asus p5w dh delux

Oct 5, 2011, 02:17 AM	#77
snipe Join Date: Jun 2011 Posts: 73 (0.10/day) Thanks: 1 Thanked 3 Times in 3 Posts	I can run BF3 no flicker, something isn't right.

Oct 5, 2011, 03:05 AM	#87
tinytiger Join Date: Sep 2010 Posts: 19 (0.02/day) Thanks: 34 Thanked 2 Times in 2 Posts	So I can't use winxp mode under HyperSLI?

Oct 5, 2011, 04:31 AM	#93
Slizzo Join Date: Aug 2011 Posts: 239 (0.36/day) Thanks: 17 Thanked 42 Times in 39 Posts System Specs	Works good for me so far. Updated my SLIPatch 1.5b to HyperSLI 0.1, left nVidia 285.38 modded drivers in. BF3 runs as well as it did before. Once an official driver package comes out I'll be able to tell definitively if it works without modded drivers; but I suspect that all will be well. Thanks anatolymik!

Processor:	Core i5 2500k @ 4.5GHz
Motherboard:	ASUS P8Z68-V Pro
Cooling:	Corsair H60
Memory:	4x4GB G.Skill DDR3-1600
Video Card:	EVGA GTX 680 SuperClocked
Hard Disk:	2x Samsung 830 128GB RAID-0, 750GB Samsung, 1.5TB Caviar Green, OCZ Vertex2 60GB
Optical Drive:	LG DVD Burner
CRT/LCD Model:	Sceptre 24" WS, Samsung 20" WS
Case:	Corsair Carbide 500R White
Sound Card:	X-Fi XtremeGamer
PSU:	CoolerMaster Gold Series 800W
Software:	Win 7 x64 Ultimate

Oct 5, 2011, 05:00 AM	#95
juanchacin Join Date: Dec 2009 Location: Zulia, Venezuela Posts: 58 (0.05/day) Thanks: 36 Thanked 14 Times in 11 Posts System Specs	Hi anatolymik what do you think about this color schemes for the sistem tray icon. BTW. Awesome work with HyperSLI __________________ CPU-Z validation sig pics temporarily blocked

System Name:	Black-Hawk
Processor:	Intel Q6600 @ 3.2
Motherboard:	Gigabyte GA-EP45 UD3P v1.6
Cooling:	CM Hyper 212 plus
Memory:	Kingston 3 Gb
Video Card:	SLI GTX 260 core 216
Hard Disk:	500Gb Samsung, 80Gb Maxtor
Optical Drive:	Lite-On DVD-RW
Case:	Tt V3 Black Edition
PSU:	Tt Toughpower XT 750w

Oct 5, 2011, 06:13 AM	#96
anatolymik Join Date: Jun 2009 Posts: 1,421 (0.99/day) Thanks: 98 Thanked 786 Times in 307 Posts	antandshell dump file tells that probably it was hardware issue. But i think there is a chance to Hypervising fault. If it is, so there is software legitimacy. You can cause the issue in any time if you find it. Try to recall what exactly software was working before BSOD. __________________ HyperSLI 0.9 HyperSLI 0.96

Oct 5, 2011, 08:30 AM	#97
CheckM8 Join Date: Oct 2011 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	HyperSLI working fine with 280.26 drivers on a Gigabyte GA-EP45-UD3P (v1.1), 2 x 9800 GX2 and Q9550. Attached Thumbnails

Oct 5, 2011, 10:27 AM	#98
rudey61 Join Date: Aug 2011 Posts: 5 (0.01/day) Thanks: 2 Thanked 0 Times in 0 Posts	I would firstly like to thank the dev team for working on this. It has been hard for you guys I WOULD LOVE TO GIVE A VERY BIG THANK YOU TO EVERYONE OF YOU! HyperSLI is working for me on Gigabyte P67A-UD3R i5-2500 MSI GTX 460 Hawk/ Palit GTX 460 Sonic Platinum OC Seasonic 620 W 80+ Bronze 12 GB Team Elite THANKS ANATOLY and TEAM!!!

System Name:	Betaku
Processor:	Intel® Core™ i7-3770K @ 4.80Ghz 1.35v
Motherboard:	MSI Big Bang Z77 MPower
Cooling:	Rad: XSPC RX360 - Pump/Res: Swiftech Maelstrom + MCP35X - Wb: EK-Supremacy Plexi/Nickel
Memory:	Avexir MPower Edition 16GB @ 2400Mhz
Video Card:	ZOTAC GeForce GTX 680 AMP! Edition 2GB
Hard Disk:	Samsung 840 Pro 256GB / WD VelociRaptor 150GB / WD Caviar Green 1TB / WD Caviar Black 500GB
Optical Drive:	Plextor PX-880SA
CRT/LCD Model:	Asus VG236HE 120Hz - 23"
Case:	Corsair Obsidian 800D
Sound Card:	Realtek Onboard
PSU:	Corsair Professional Series HX850
Software:	Windows 7 Ultimate x64

Oct 5, 2011, 11:07 AM	#100
amine4ever Join Date: Oct 2011 Location: france Posts: 15 (0.03/day) Thanks: 0 Thanked 0 Times in 0 Posts	Whats the difference between slipatch and hypersli?

System Name:	Windows7 Professional x64 SP1
Processor:	intel core i5 cpu 760 2.80GHz
Motherboard:	Asrock P55 Pro/USB3
Memory:	2x 2go G skill DDR3-1333
Video Card:	2x NVIDIA GeForce GTS 450 1024mo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem enabling SLI with 2 480GTX's	hv43082	NVIDIA	2	Sep 30, 2010 05:55 AM
GTS250 and 9800gtx+ non SLI?	Black Haru	NVIDIA	4	Feb 25, 2010 01:39 AM
Galaxy Ready with nForce 740i SLI Motherboards, Integrated 9400 GT and SLI on Offer	btarunr	News	8	Oct 16, 2008 03:49 PM
Enabling SLI	Flava0ne	NVIDIA	22	Aug 21, 2008 10:40 PM
SLI disabled on 1697 motherboards	persnikitty	Motherboards & Memory	5	May 11, 2006 02:10 AM