TPU's F@H Team - Page 586

msgclb · Oct 16, 2011, 07:25 PM

Quote:

Originally Posted by oily_17

Going to be down a rig for awhile....damned rad sprung a leak...hope it turned itself off before it done any damage.

Try:

I've been trying to get an i7-970 rig water cooled for several months and there's always some unexpected expense every month. I'm now shooting for the 1st of Nov.

Quote:

Originally Posted by [H]@RD5TUFF

Got mine and it does terribad on -big adv.

It gets worse if you looks at the heat output and the power usage.

The one thing I can't live with is excessive heat output.

[H]@RD5TUFF · Oct 16, 2011, 08:03 PM

Quote:

Originally Posted by msgclb

The one thing I can't live with is excessive heat output.

Sadly saying it runs warm is being charitable.

dank1983man420 · Oct 17, 2011, 05:01 PM

There's a new FAH client v7 up on the beta site. https://fah-web.stanford.edu/project...ki/BetaRelease

I hope they fixed it so there's a better way to get rid of stuck/aborted work units this time

thebluebumblebee · Oct 17, 2011, 05:30 PM

Warm weather is returning so I'm going to have to reduce my Folding activities until it cools back down, which means daytime highs below 60.

[H]@RD5TUFF · Oct 18, 2011, 02:03 AM

So I am tired of my room being above 80 so my BD will no longer be folding.

seriously AMD WTF.

BUCK NASTY · Oct 19, 2011, 03:59 PM

I fried a P-55 mobo that was on it's last leg, so I will be down a rig until DonInKansas ships me the GA-P55-UD3R I just bought from him.

johnspack · Oct 19, 2011, 04:23 PM

Anyone try the new fahclient yet? I see it says xp-32bit, does it work as well as the older 64bit version under win7 64? Before I go switching both my boxes over....

thebluebumblebee · Oct 19, 2011, 04:58 PM

There's only two reasons to use the new client:
1.) You're a new Folder. It's very easy to set up.
2.) You're using AMD 5xxx GPU's or newer. This is the only client that supports the new Fah_Core16 which gets, finally, good points from the red side's GPU's, and even then you have to jump through hoops to get it to work.

Why not to use it:
Monitoring. To my knowledge, it does not work with any third party monitoring software like HFM.net or FAHmon. I got the client to tell me it's PPD on one (SMP/GPU) install, but my most recent (GPU) install, with the newer beta, would not.

We have a Client V7 thread

johnspack · Oct 20, 2011, 05:12 AM

I already use the older fahclient on both folding boxes. Much easier to deal with 2 gpus and a cpu from a single interface. I don't worry about monitoring, I can see my ppd just by checking the stats. I mainly would like to get rid of the stuck/aborted units bug. Someone let me know if the new version fixes it, otherwise I'll just leave them.

thebluebumblebee · Oct 21, 2011, 03:30 AM

i7-970 for $380 anyone? http://www.techpowerup.com/forums/sh...d.php?t=153545

johnspack · Oct 21, 2011, 04:06 AM

Wow, just in time too. My 750i mobo just kicked the bucket.... Now I can sell the e8400 to a good buddy on perm disability for cheap. He's still on a e7300, and I need him in my online squadron. Life goes on...... with i7 folding I guess...

BUCK NASTY · Oct 24, 2011, 11:39 PM

Thanks to Brandonwh64, I have -bigadv Rig#3 back up and running. I'm coming back for 3rd spot!

johnspack · Oct 26, 2011, 08:27 PM

I'll ask you guys for help too, looking for a core2quad for 150 or less. Payment would be made in full before you have to ship. Any ideas appreciated!

johnspack · Oct 26, 2011, 09:05 PM

Also, looking for a case suitable for leaving side panel off, and folding an i7 and up to 3 gpus. I don't have anything that will do.

thebluebumblebee · Oct 26, 2011, 09:22 PM

Naked is the way to go!

[H]@RD5TUFF · Oct 26, 2011, 11:24 PM

Well back up to 100% now folding at around 50,000 PPD for TPU. And best of all thanks to my new solar panels it costs me nothing!

Also Johnspack I may have a Core 2 quad a 9650 for sale soon, when I upgrade my LAN machine to LGA 2011.

theonedub · Oct 26, 2011, 11:28 PM

Quote:

Originally Posted by [H]@RD5TUFF

Well back up to 100% now folding at around 50,000 PPD for TPU. And best of all thanks to my new solar panels it costs me nothing!

Also Johnspack I may have a Core 2 quad a 9650 for sale soon, when I upgrade my LAN machine to LGA 2011.

Any pics of the solar installation? Would love to get a look at it

[H]@RD5TUFF · Oct 26, 2011, 11:30 PM

Quote:

Originally Posted by theonedub

Any pics of the solar installation? Would love to get a look at it

They are hard to see because of how they sit on the house, but if you like I can try and do some pics this weekend.

johnspack · Oct 28, 2011, 07:03 AM

Think I'll have to sell off what's left of my folding farm for now. My ppd will drop to nothing, sorry. It will take up to 3 months, and I will start my i7 folding farm. Eventually I want to go all cpu folding. I will shortly be looking for another 1st gen i7 9xx series, and another x58 mobo. I will have the money for it. Anyone who has, or will have these parts, please let me know.

[H]@RD5TUFF · Oct 28, 2011, 11:11 PM

Quote:

Originally Posted by theonedub

Any pics of the solar installation? Would love to get a look at it

Can do a nice pick of the panels on the back hill.

johnspack · Oct 29, 2011, 03:48 AM

Will be looking for offers on x58 stuff for the forseeable future. Have sold off my main intel folding rig now, but will leave my old Athlon rig going. Need ram, and a water cooling kit, and I can build my new i7 folding rig. A work in progress......

bogmali · Oct 29, 2011, 10:17 PM

Quote:

Originally Posted by johnspack

Will be looking for offers on x58 stuff for the foreseeable future. Have sold off my main intel folding rig now, but will leave my old Athlon rig going. Need ram, and a water cooling kit, and I can build my new i7 folding rig. A work in progress......

LMK, I have a buddy who wants to unload an 975 and Mobo.

johnspack · Oct 29, 2011, 10:33 PM

Oh dam, a 975! If there is any way in hades I could afford that, yes, I want it! My 2nd i7 cpu is arriving within days, so guess I need a new project! Any idea what mobo?

Chicken Patty · Oct 30, 2011, 03:28 AM

Just got this up and running.

msgclb · Oct 30, 2011, 04:14 AM

Quote:

Originally Posted by Chicken Patty

Just got this up and running.

http://img.techpowerup.org/111029/photo.jpg

Water cooling on a Tech Station!

I would have had a new rig on a Tech Station running today but my memory is quarantined at my local USPS office. It should have been delivered Friday but instead I got a "Sorry We Missed You!" slip so I have to wait until Monday Oct 31 to get it.

This rig was to be based on Bulldozer but now I'm not sure what the final processor will be. I will also have water cooling but mine is base on the Corsair H50.

My camera battery is now being charged so hopefully Monday I'll return with some images and more information.

System Name:	My System
Processor:	AMD Phenom II X4 965 BE
Motherboard:	ASUS M5A97 R2.0
Cooling:	Corsair H100 Cooler
Memory:	G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866
Video Card:	EVGA - GeForce GTX 660 Ti Superclocked
Hard Disk:	Western Digital
Optical Drive:	LG-Internal Blu-ray DVD Drive GBC-H20LI
CRT/LCD Model:	BenQ G2400WD Black 24"
Case:	NZXT Crafted Series Tempest 410 Elite
Sound Card:	Onboard HD Audio
PSU:	Thermaltake Black Widow W0319RU 850W
Software:	Windows 8 Pro w/ Media Center

System Name:	White Boy
Processor:	Core i7 3770k @4.6 Ghz
Motherboard:	ASUS P8Z77-I Deluxe
Cooling:	CORSAIR H100
Memory:	CORSAIR Vengeance 16GB @ 2177
Video Card:	EVGA GTX 680 CLASSIEFIED @ 1250 Core
Hard Disk:	2 Samsung 830 256 GB (Raid 0) 1 Hitachi 4 TB
Optical Drive:	none
CRT/LCD Model:	1 Dell 30U11 30"
Case:	BIT FENIX Prodigy
Sound Card:	none
PSU:	SeaSonic X750 Gold 750W Modular
Software:	Windows Pro 7 64 bit \|\| Ubuntu 64 Bit
Benchmarks:	2017 Unigine Heaven :: P37239 3D Mark Vantage

Oct 17, 2011, 05:01 PM	#14628
dank1983man420 Join Date: Apr 2008 Location: Near Chicago, IL Posts: 435 (0.23/day) Thanks: 284 Thanked 138 Times in 88 Posts System Specs	new version 7 beta up There's a new FAH client v7 up on the beta site. https://fah-web.stanford.edu/project...ki/BetaRelease I hope they fixed it so there's a better way to get rid of stuck/aborted work units this time __________________ http://heatware.com/eval.php?id=67615 NEW FS THREAD UPDATED 3/11/13 http://www.techpowerup.com/forums/sh...d.php?t=181295

System Name:	Big black thing
Processor:	I7 950
Motherboard:	Gigabyte X58A-UD3R
Cooling:	A shitload of fans
Memory:	12 GB Patriot 1600MHZ DDR3
Video Card:	2 x GTX465 w/gtx260 for physx & folding
Hard Disk:	120GB OCZ Agility 3 for OS / 2 x 750 Seagate 7200.11 (Raid 0)
Optical Drive:	Samsung CD/DVD writer, LG blu ray drive
CRT/LCD Model:	27" Potalion 2560x1440
Case:	HAF 932
Sound Card:	X-fi titanium
PSU:	coolermaster 1000W Silent Pro
Software:	Windows 7 64 bit Ultimate

System Name:	Current/NEW!
Processor:	AMD Athlon 64 X2-4400+/i7-2600K
Motherboard:	Gigabyte GA-K8NS Ultra-939/GA-P67A-UD4-B3
Cooling:	OCZ Vendetta/H80
Memory:	2GB DDR-400/8GB Corsair DDR3 1600
Video Card:	RADEON 9800 PRO AGP/2x GB GTX 560 Ti
Hard Disk:	Seagate 160GB IDE/120GB Samsung 830 & Seagate 2TB
Optical Drive:	LITE-ON DVDRW LH-20A1L/Pioneer DVR-219LBK
CRT/LCD Model:	Samsung SyncMaster B1940/Asus 24' LED
Case:	Ever Case E4252WSF-F/Antec P280 It's huge!
Sound Card:	SB Audigy 2 ZS/on board
PSU:	Corsair VX550/SeaSonic S12II 620
Software:	XP MCE SP3/Win 7 Home Premiun 64 Bit
Benchmarks:	Are you kidding?/3DMark11 basic P8681

Oct 17, 2011, 05:30 PM	#14629
thebluebumblebee Join Date: Jul 2008 Location: Portland, OR USA Posts: 2,138 (1.20/day) Thanks: 1,554 Thanked 879 Times in 626 Posts System Specs	Warm weather is returning so I'm going to have to reduce my Folding activities until it cools back down, which means daytime highs below 60.

Oct 18, 2011, 02:03 AM	#14630
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,589 (4.36/day) Thanks: 1,825 Thanked 1,710 Times in 1,431 Posts System Specs	So I am tired of my room being above 80 so my BD will no longer be folding. seriously AMD WTF. __________________ Stuff 4 Sale! Heat Ware ebay

Oct 19, 2011, 03:59 PM	#14631
BUCK NASTY F@H Mod & 4P Enthusiust Join Date: Aug 2007 Location: Tallahassee, FL. U.S.A. Posts: 4,047 (1.92/day) Thanks: 3,375 Thanked 2,907 Times in 1,474 Posts System Specs	I fried a P-55 mobo that was on it's last leg, so I will be down a rig until DonInKansas ships me the GA-P55-UD3R I just bought from him. __________________ “I'll finally be able to drool over 8 gpu in one rig... And get sued by my wallet for violent physical damage...” -Feanor

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

Oct 19, 2011, 04:23 PM	#14632
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Anyone try the new fahclient yet? I see it says xp-32bit, does it work as well as the older 64bit version under win7 64? Before I go switching both my boxes over.... __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

System Name:	Blacknet
Processor:	i7 950@ 4.1GHz
Motherboard:	Asus Rampage II Gene
Cooling:	Noctua NH-D14, 8 case fans
Memory:	24GB gskill ripjaws@ 1800mhz
Video Card:	Evga GTX480 + GTX260 Physx + TrackIR 5
Hard Disk:	WD Black 1TB 64mb cache + Spinpoint F1 750g backup + 2TB Seagate backup + 320GB Seagate backup
Optical Drive:	LG BH12LS38 Blu Ray burner
CRT/LCD Model:	Syncmaster 2443BW 1920x1200 Lcd + 19" ViewSonic Lcd
Case:	Antec 1200
Sound Card:	Onboard
PSU:	Silverstone 850Watt Strider+ Modular
Software:	Win7 x64 SP1 Ultimate
Benchmarks:	Time to upgrade to 680s....

Oct 19, 2011, 04:58 PM	#14633
thebluebumblebee Join Date: Jul 2008 Location: Portland, OR USA Posts: 2,138 (1.20/day) Thanks: 1,554 Thanked 879 Times in 626 Posts System Specs	There's only two reasons to use the new client: 1.) You're a new Folder. It's very easy to set up. 2.) You're using AMD 5xxx GPU's or newer. This is the only client that supports the new Fah_Core16 which gets, finally, good points from the red side's GPU's, and even then you have to jump through hoops to get it to work. Why not to use it: Monitoring. To my knowledge, it does not work with any third party monitoring software like HFM.net or FAHmon. I got the client to tell me it's PPD on one (SMP/GPU) install, but my most recent (GPU) install, with the newer beta, would not. We have a Client V7 thread

Oct 20, 2011, 05:12 AM	#14634
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	I already use the older fahclient on both folding boxes. Much easier to deal with 2 gpus and a cpu from a single interface. I don't worry about monitoring, I can see my ppd just by checking the stats. I mainly would like to get rid of the stuck/aborted units bug. Someone let me know if the new version fixes it, otherwise I'll just leave them. __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 21, 2011, 03:30 AM	#14635
thebluebumblebee Join Date: Jul 2008 Location: Portland, OR USA Posts: 2,138 (1.20/day) Thanks: 1,554 Thanked 879 Times in 626 Posts System Specs	i7-970 for $380 anyone? http://www.techpowerup.com/forums/sh...d.php?t=153545

Oct 21, 2011, 04:06 AM	#14636
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Wow, just in time too. My 750i mobo just kicked the bucket.... Now I can sell the e8400 to a good buddy on perm disability for cheap. He's still on a e7300, and I need him in my online squadron. Life goes on...... with i7 folding I guess... __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 24, 2011, 11:39 PM	#14637
BUCK NASTY F@H Mod & 4P Enthusiust Join Date: Aug 2007 Location: Tallahassee, FL. U.S.A. Posts: 4,047 (1.92/day) Thanks: 3,375 Thanked 2,907 Times in 1,474 Posts System Specs	Thanks to Brandonwh64, I have -bigadv Rig#3 back up and running. I'm coming back for 3rd spot! __________________ “I'll finally be able to drool over 8 gpu in one rig... And get sued by my wallet for violent physical damage...” -Feanor

Oct 26, 2011, 08:27 PM	#14638
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	I'll ask you guys for help too, looking for a core2quad for 150 or less. Payment would be made in full before you have to ship. Any ideas appreciated! __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 26, 2011, 09:05 PM	#14639
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Also, looking for a case suitable for leaving side panel off, and folding an i7 and up to 3 gpus. I don't have anything that will do. __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 26, 2011, 09:22 PM	#14640
thebluebumblebee Join Date: Jul 2008 Location: Portland, OR USA Posts: 2,138 (1.20/day) Thanks: 1,554 Thanked 879 Times in 626 Posts System Specs	Naked is the way to go!

Oct 26, 2011, 11:24 PM	#14641
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,589 (4.36/day) Thanks: 1,825 Thanked 1,710 Times in 1,431 Posts System Specs	Well back up to 100% now folding at around 50,000 PPD for TPU. And best of all thanks to my new solar panels it costs me nothing! Also Johnspack I may have a Core 2 quad a 9650 for sale soon, when I upgrade my LAN machine to LGA 2011. __________________ Stuff 4 Sale! Heat Ware ebay

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	Asrock Z77E-ITX
Cooling:	Corsair H100 w/ SP120s
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	MSI GTX 580 TFIII LIGHTNING (875c@1.006v)
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	BitFenix Prodigy White
PSU:	Antec TruePower New Blue 750w
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

Oct 28, 2011, 07:03 AM	#14644
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Think I'll have to sell off what's left of my folding farm for now. My ppd will drop to nothing, sorry. It will take up to 3 months, and I will start my i7 folding farm. Eventually I want to go all cpu folding. I will shortly be looking for another 1st gen i7 9xx series, and another x58 mobo. I will have the money for it. Anyone who has, or will have these parts, please let me know. __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 29, 2011, 03:48 AM	#14646
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Will be looking for offers on x58 stuff for the forseeable future. Have sold off my main intel folding rig now, but will leave my old Athlon rig going. Need ram, and a water cooling kit, and I can build my new i7 folding rig. A work in progress...... __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

Oct 29, 2011, 10:33 PM	#14648
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Oh dam, a 975! If there is any way in hades I could afford that, yes, I want it! My 2nd i7 cpu is arriving within days, so guess I need a new project! Any idea what mobo? __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

Oct 30, 2011, 03:28 AM	#14649
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,887 (11.94/day) Thanks: 15,149 Thanked 12,309 Times in 7,775 Posts System Specs	Just got this up and running. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)