HyperSLI (Enabling SLI on non-sli motherboards) - Page 12

anatolymik · Oct 25, 2011, 04:08 AM

Quote:

Originally Posted by xXxCarBoyxXx

Hey I downloaded the hyper SLI patch and the newest driver (285.62) and the SLI is working but I am getting the same screen flicker that I got when i used patches higher than 275.33. That driver worked perfectly but I can't use it for BF3. What can I do to fix this? It's basically like a very fast flicker in both the menus and the actual game in any fullscreen game.

tell me if you didnt find solution

xXxCarBoyxXx · Oct 25, 2011, 04:48 AM

Yeah it still doesnt work

. Its a super fast flicker that hurts the eyes.

anatolymik · Oct 25, 2011, 04:50 AM

Quote:

Originally Posted by xXxCarBoyxXx

Yeah it still doesnt work

. Its a super fast flicker that hurts the eyes.

Any game?

xXxCarBoyxXx · Oct 25, 2011, 04:53 AM

Yep any full screen game, when I turn off SLI or i run windowed mode its fine, but full screen with SLI and any patch after 275.33 it flickers

xXxCarBoyxXx · Oct 25, 2011, 04:57 AM

Also if this helps. When I click on HyperSLI status in my taskbar it says
"Hypervisor not enabled"
"Virtualization Technology is not allowed in BIOS"

xXxCarBoyxXx · Oct 25, 2011, 05:10 AM

Sorry for the triple post but I just tried playing counterstrike source and there is no flicker but I believe that is irrelevant since it does not use SLI.

DeahSeed · Oct 25, 2011, 05:12 AM

Quote:

Originally Posted by xXxCarBoyxXx

Also if this helps. When I click on HyperSLI status in my taskbar it says
"Hypervisor not enabled"
"Virtualization Technology is not allowed in BIOS"

Did you check to see if Secure Virtual Machine is enabled in your bios?

JrRacinFan · Oct 25, 2011, 05:12 AM

Anyone with reports on an AMD 970 chipset? I am only assuming it would work since I see a few users reporting success with the 770 chipset.

EDIT:

If any user has an extra 7300GT laying about I can test it to at least confirm it works with the 0.6 Beta.

anatolymik · Oct 25, 2011, 05:12 AM

Quote:

Originally Posted by xXxCarBoyxXx

Also if this helps. When I click on HyperSLI status in my taskbar it says
"Hypervisor not enabled"
"Virtualization Technology is not allowed in BIOS"

you DIDNT enable SVM or VT-x in BIOS

. I specially made HyperSLI CP for this. To user to see what's happening....

anatolymik · Oct 25, 2011, 05:13 AM

Quote:

Originally Posted by DeahSeed

Did you check to see if Secure Virtual Machine is enabled in your bios?

it's not enabled. i'm sure.

xXxCarBoyxXx · Oct 25, 2011, 05:32 AM

Oh man your the best, I disabled it a while ago and I totally forgot about it, everything works now man, no flickers. I appreciate it man, awesome patch.

noriveia · Oct 25, 2011, 04:31 PM

I have an ASUS p8p67 motherboard with an Intel 2500k CPU and two GTX460 cards. This mobo does not have SLI only crossfire. Will HyperSLI work for this set up?

federicoz45 · Oct 25, 2011, 05:36 PM

Quote:

Originally Posted by noriveia

I have an ASUS p8p67 motherboard with an Intel 2500k CPU and two GTX460 cards. This mobo does not have SLI only crossfire. Will HyperSLI work for this set up?

Hi, welcome to the HyperSLI forum. On the Asus website your mobo looks Nvidia SLI enabled. Anyway the only requirement for your setup is to have Virtualization technology enabled in the bios, if available. Or to be quick, download the Hypersli install it and reboot.
You'll see a new icon in the tray. Open it and check if the Hyper is enabled or not. The SLI bridge is highly recommended.

noriveia · Oct 25, 2011, 07:44 PM

Ok enabled vt in bios installed hyper sli rebooted reinstalled latest drivers and got the Hypersli control panel says its working but int he nvidia drivers i still cant enable sli and i used a benchmark before and after to verify that my performance has indeed NOT changed yet. I have abridge installed. So whats next?

The p8p67 is NOT SLI enabled only the fancier versions the deluxe/pro/evo/ etc

DARkNESS · Oct 25, 2011, 08:06 PM

Quote:

Originally Posted by noriveia

Ok enabled vt in bios installed hyper sli rebooted reinstalled latest drivers and got the Hypersli control panel says its working but int he nvidia drivers i still cant enable sli and i used a benchmark before and after to verify that my performance has indeed NOT changed yet. I have abridge installed. So whats next?

The p8p67 is NOT SLI enabled only the fancier versions the deluxe/pro/evo/ etc

Is the SLI option even showing in the NVIDIA Control Panel? If so is it just not letting you select Enable SLI or just not showing at all?

---
Upon further research I noticed that your motherboard uses a UEFI BIOS, you will have to get with anatolymik directly to get support for this issue, or I can possibly help you with if it is the same issue I was having if he gives me the go ahead.

thegreat_88 · Oct 26, 2011, 02:32 AM

Sorry to troll but wanted to jump into this thread and help where I can. Pretty PC savy and know a bit about hex editing and bios flashing, etc. (i know woohoo

) just saying...

My setup:

MSI 790FX-GD70 (crossfire) BIOS v1.17
AMD 965 Black Edition OCed @4.0Ghz
4GB Patriot Hyper X DDR3 1600 @1716Mhz
2x 8800GTS 320MB SLI (

) BIOS flashed to 615Mhz on both
Driver 258.62 (Oct 25th) damn BF3 "special driver Bull****"

Windows 7 x64 Ultimate SP1
don't think the rest matters but...
2x RAID 0 RaptorX 300GBs OS / game install DIR
2x JBOD Raptor 150 & 300 scratch / data
2x RAID1 Seagate 1TB Backups
Antec 750watt SLI certified

I upgraded today to 285.62 but modded driver patch only goes to 285.38 and obviously I was unstable with flickering, etc. I'm assuming the driver changes the encoding security on the PCI-E bus for enabling SLI?? (ty Nvidia for being ***holes and making it manditory you buy certain boards, although they have canceled that now in recent boards)

what can I do to help?? other than wait patiently cause everybody is bugging the hell out of you guys for this patch to work for BF3, like me

Gimme something to TEST!

cheers!

woot my first post! Feel so powered up!

Thanks,
Matt

anatolymik · Oct 26, 2011, 02:45 AM

Quote:

Originally Posted by DARkNESS

Is the SLI option even showing in the NVIDIA Control Panel? If so is it just not letting you select Enable SLI or just not showing at all?

it's not like your case. he has windows boot ok. your problem was HyperSLI installer doesnt support efi loader of windows (this will be fixed in further versions).

DeahSeed · Oct 26, 2011, 03:28 AM

Quote:

Originally Posted by thegreat_88

Sorry to troll but wanted to jump into this thread and help where I can. Pretty PC savy and know a bit about hex editing and bios flashing, etc. (i know woohoo

) just saying...

My setup:

MSI 790FX-GD70 (crossfire) BIOS v1.17
AMD 965 Black Edition OCed @4.0Ghz
4GB Patriot Hyper X DDR3 1600 @1716Mhz
2x 8800GTS 320MB SLI (

) BIOS flashed to 615Mhz on both
Driver 258.62 (Oct 25th) damn BF3 "special driver Bull****"

Windows 7 x64 Ultimate SP1
don't think the rest matters but...
2x RAID 0 RaptorX 300GBs OS / game install DIR
2x JBOD Raptor 150 & 300 scratch / data
2x RAID1 Seagate 1TB Backups
Antec 750watt SLI certified

I upgraded today to 285.62 but modded driver patch only goes to 285.38 and obviously I was unstable with flickering, etc. I'm assuming the driver changes the encoding security on the PCI-E bus for enabling SLI?? (ty Nvidia for being ***holes and making it manditory you buy certain boards, although they have canceled that now in recent boards)

what can I do to help?? other than wait patiently cause everybody is bugging the hell out of you guys for this patch to work for BF3, like me

Gimme something to TEST!

cheers!

woot my first post! Feel so powered up!

Thanks,
Matt

With the new hyper sli you don't need modded drivers anymore also im running battlefield 3 with the 285.62 drivers and its working perfect.
Are you running the sli patch or hyper sli?

thegreat_88 · Oct 26, 2011, 03:50 AM

the SLI patch.... well SOB I'm missing out on so much action!! See ya there

perche · Oct 26, 2011, 03:57 PM

My pc work ok with hypersli 0.6

gigabyte 790x-ds4
phenom 2 940be
2x gtx460 with 285.62

awesome work anatolymik

DeahSeed · Oct 27, 2011, 03:57 AM

Was having a slight problem but not for sure if it was the hyper sli or not but for some reason when i would boot into window one of my graphics cards was completely disabled not even showing up in the device manager windows was really slow to so i tried to restart then when booting back up all kinds of graphics corruption all over the screen then when windows started to boot i got a BSOD so i hit the restart button then booted again no corruption this time but still no second graphics card.
I got tired of it so i reinstalled windows now it's working fine so far.
Also i notice about a 4 degree temp differance on one of my graphics cards no matter where i put it

DARkNESS · Oct 27, 2011, 04:13 AM

Quote:

Originally Posted by DeahSeed

Was having a slight problem but not for sure if it was the hyper sli or not but for some reason when i would boot into window one of my graphics cards was completely disabled not even showing up in the device manager windows was really slow to so i tried to restart then when booting back up all kinds of graphics corruption all over the screen then when windows started to boot i got a BSOD so i hit the restart button then booted again no corruption this time but still no second graphics card.
I got tired of it so i reinstalled windows now it's working fine so far

So your saying now your not having any problems?? And if not then obviously you had a corrupted driver or a similar issue which was fixed with the fresh install of windows.

DeahSeed · Oct 27, 2011, 04:29 AM

Was not having any problem at first then just all the sudden that stuff happened
I am starting to think one of my graphics cards is going bad cause of the temp problem that just started to they used to be about the same.
Is there any program to test for that or no

DARkNESS · Oct 27, 2011, 04:35 AM

Quote:

Originally Posted by DeahSeed

Was not having any problem at first then just all the sudden that stuff happened
I am starting to think one of my graphics cards is going bad cause of the temp problem that just started to they used to be about the same.
Is there any program to test for that or no

Run a stress test.

havoc74 · Oct 27, 2011, 06:10 AM

Hello I confirme for me 285.62 and MSI 790FX-GD70 is ok with HyperSli 0.6.

Processor:	AMD x4 965 BE
Motherboard:	ASUS Crosshair IV Formula
Cooling:	Water cooled
Memory:	8 Gigs corsair xms 3
Video Card:	2 gtx 470's
Hard Disk:	2 TB
Optical Drive:	Samsung super write master
CRT/LCD Model:	Acer 21.5 inch LED
Case:	Cooler Master HAF 912 full tower
Sound Card:	onboard
PSU:	950 Watt

Oct 25, 2011, 05:12 AM	#283
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.13/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Anyone with reports on an AMD 970 chipset? I am only assuming it would work since I see a few users reporting success with the 770 chipset. EDIT: If any user has an extra 7300GT laying about I can test it to at least confirm it works with the 0.6 Beta. __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

System Name:	Water Damage Inc.
Processor:	AMD Phenom X6 1090T
Motherboard:	Asus Crosshair IV Formula
Cooling:	Full watercooled EK W.B. - Aquacomputer Gmbh. CPU-MB-VGA
Memory:	Corsair XMS3 DDR 3 8gb 1600 Mhz
Video Card:	P.O.V. GTX 570 U.C. - EVGA GTX 570 S.C.
Hard Disk:	SSD vertex 2 64 Gb - SSD Agility 4 128 Gb
Optical Drive:	X
CRT/LCD Model:	ASUS VE278Q
Case:	CoolerMaster CM690 Nvidia edition
Sound Card:	Built in MB
PSU:	Thermaltake Toughpower 1350W
Software:	Windows 7 x64 ultimate

Processor:	AMD Phenom II X6 1075T
Motherboard:	MSI 890FXA-GD70
Cooling:	CORSAIR H50 Water Cooled
Memory:	CORSAIR Vengeance 8GB 1866 PC3 15000
Video Card:	Dual MSI Nvidia GeForce GTS450 Cyclone 1GB DDR5
Hard Disk:	WDC 1TB
CRT/LCD Model:	HANNspree 23" Widescreen
Case:	NZXT Phantom Black
PSU:	X3 800 Watt Modular
Software:	Windows 7 Ultimate 64bit

Oct 25, 2011, 04:48 AM	#277
xXxCarBoyxXx Join Date: Oct 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 1 Time in 1 Post	Yeah it still doesnt work . Its a super fast flicker that hurts the eyes.

Oct 25, 2011, 04:53 AM	#279
xXxCarBoyxXx Join Date: Oct 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 1 Time in 1 Post	Yep any full screen game, when I turn off SLI or i run windowed mode its fine, but full screen with SLI and any patch after 275.33 it flickers

Oct 25, 2011, 04:57 AM	#280
xXxCarBoyxXx Join Date: Oct 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 1 Time in 1 Post	Also if this helps. When I click on HyperSLI status in my taskbar it says "Hypervisor not enabled" "Virtualization Technology is not allowed in BIOS"

Oct 25, 2011, 05:10 AM	#281
xXxCarBoyxXx Join Date: Oct 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 1 Time in 1 Post	Sorry for the triple post but I just tried playing counterstrike source and there is no flicker but I believe that is irrelevant since it does not use SLI.

Oct 25, 2011, 05:32 AM	#286
xXxCarBoyxXx Join Date: Oct 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 1 Time in 1 Post	Oh man your the best, I disabled it a while ago and I totally forgot about it, everything works now man, no flickers. I appreciate it man, awesome patch.

Oct 25, 2011, 04:31 PM	#287
noriveia Join Date: Oct 2011 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	I have an ASUS p8p67 motherboard with an Intel 2500k CPU and two GTX460 cards. This mobo does not have SLI only crossfire. Will HyperSLI work for this set up?

Oct 25, 2011, 07:44 PM	#289
noriveia Join Date: Oct 2011 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Ok enabled vt in bios installed hyper sli rebooted reinstalled latest drivers and got the Hypersli control panel says its working but int he nvidia drivers i still cant enable sli and i used a benchmark before and after to verify that my performance has indeed NOT changed yet. I have abridge installed. So whats next? The p8p67 is NOT SLI enabled only the fancier versions the deluxe/pro/evo/ etc

Oct 26, 2011, 02:32 AM	#291
thegreat_88 Join Date: Oct 2010 Posts: 4 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Ready to test Sorry to troll but wanted to jump into this thread and help where I can. Pretty PC savy and know a bit about hex editing and bios flashing, etc. (i know woohoo ) just saying... My setup: MSI 790FX-GD70 (crossfire) BIOS v1.17 AMD 965 Black Edition OCed @4.0Ghz 4GB Patriot Hyper X DDR3 1600 @1716Mhz 2x 8800GTS 320MB SLI () BIOS flashed to 615Mhz on both Driver 258.62 (Oct 25th) damn BF3 "special driver Bull**" Windows 7 x64 Ultimate SP1 don't think the rest matters but... 2x RAID 0 RaptorX 300GBs OS / game install DIR 2x JBOD Raptor 150 & 300 scratch / data 2x RAID1 Seagate 1TB Backups Antec 750watt SLI certified I upgraded today to 285.62 but modded driver patch only goes to 285.38 and obviously I was unstable with flickering, etc. I'm assuming the driver changes the encoding security on the PCI-E bus for enabling SLI?? (ty Nvidia for being holes and making it manditory you buy certain boards, although they have canceled that now in recent boards) what can I do to help?? other than wait patiently cause everybody is bugging the hell out of you guys for this patch to work for BF3, like me Gimme something to TEST! cheers! woot my first post! Feel so powered up! Thanks, Matt Last edited by thegreat_88; Oct 26, 2011 at 02:41 AM. Reason: wrong*

Oct 26, 2011, 03:50 AM	#294
thegreat_88 Join Date: Oct 2010 Posts: 4 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Ha! the SLI patch.... well SOB I'm missing out on so much action!! See ya there

Oct 26, 2011, 03:57 PM	#295
perche Join Date: Mar 2011 Posts: 10 (0.01/day) Thanks: 0 Thanked 2 Times in 2 Posts	My pc work ok with hypersli 0.6 gigabyte 790x-ds4 phenom 2 940be 2x gtx460 with 285.62 awesome work anatolymik

Oct 27, 2011, 03:57 AM	#296
DeahSeed Join Date: Sep 2011 Posts: 31 (0.05/day) Thanks: 2 Thanked 0 Times in 0 Posts System Specs	Was having a slight problem but not for sure if it was the hyper sli or not but for some reason when i would boot into window one of my graphics cards was completely disabled not even showing up in the device manager windows was really slow to so i tried to restart then when booting back up all kinds of graphics corruption all over the screen then when windows started to boot i got a BSOD so i hit the restart button then booted again no corruption this time but still no second graphics card. I got tired of it so i reinstalled windows now it's working fine so far. Also i notice about a 4 degree temp differance on one of my graphics cards no matter where i put it Last edited by DeahSeed; Oct 27, 2011 at 04:12 AM.

Oct 27, 2011, 04:29 AM	#298
DeahSeed Join Date: Sep 2011 Posts: 31 (0.05/day) Thanks: 2 Thanked 0 Times in 0 Posts System Specs	Was not having any problem at first then just all the sudden that stuff happened I am starting to think one of my graphics cards is going bad cause of the temp problem that just started to they used to be about the same. Is there any program to test for that or no

Oct 27, 2011, 06:10 AM	#300
havoc74 Join Date: Aug 2011 Posts: 6 (0.01/day) Thanks: 1 Thanked 0 Times in 0 Posts	Hello I confirme for me 285.62 and MSI 790FX-GD70 is ok with HyperSli 0.6.

Currently Active Users Viewing This Thread: 5 (0 members and 5 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem enabling SLI with 2 480GTX's	hv43082	NVIDIA	2	Sep 30, 2010 05:55 AM
GTS250 and 9800gtx+ non SLI?	Black Haru	NVIDIA	4	Feb 25, 2010 01:39 AM
Galaxy Ready with nForce 740i SLI Motherboards, Integrated 9400 GT and SLI on Offer	btarunr	News	8	Oct 16, 2008 03:49 PM
Enabling SLI	Flava0ne	NVIDIA	22	Aug 21, 2008 10:40 PM
SLI disabled on 1697 motherboards	persnikitty	Motherboards & Memory	5	May 11, 2006 02:10 AM