HyperSLI (Enabling SLI on non-sli motherboards) - Page 19

ShadySWE · Nov 16, 2011, 01:12 AM

Quote:

Originally Posted by anatolymik

no sli option?

No SLI-option in my NVIDIA Control Panel, the HyperSLI-software runs though and is enabled. I'm running on the NVIDIA 285.62-drivers...

I'm going to try Driver Sweeper and then install HyperSLI again.

Has HyperSLI worked properly for other P67-users?

I would be really happy if you could help me out. I have invested in a new PSU and bought 2 Geforce cards just to be able to play BF3 in high settings. Now it seems I have to buy a new motherboard, gaaah...

If you get it to work you guys should put up a donation-page. It would save me a lot of money if this software would work...

-=LeKtoR=- · Nov 16, 2011, 02:57 AM

Quote:

Has HyperSLI worked properly for other P67-users?

i have P8P67-M and sli doesn't work

anatolymik · Nov 16, 2011, 07:04 AM

do you use sli bridges?

-=LeKtoR=- · Nov 16, 2011, 07:09 AM

Yep

E-WoK · Nov 16, 2011, 09:03 AM

i have the same problem with p55 board. installed nvidia driver after complete deinstallation with driver sweaper and also tried sli patch 1.5 and hypersli 0.6 and 0.7. the option "sli" never appeared in nvidia controle panel.

http://www.techpowerup.com/forums/sh...&postcount=414

Sukram · Nov 16, 2011, 10:32 AM

Hallo,

my Problem: HyperSLI 0.7, Windows 7 64 Ultimate, driver 285.79, 2x450 GTS, SLI Bridge, SLI activated, when I start TMPGEnc 5.0.6.38 Video Mastering and want to use CUDA-cores for decoding MPEG 1,2, and 4 I get a bluescreen and a reset ... any suggestions? Everything else works perfekt ...

Thanx a lot,

Sukram.

anatolymik · Nov 16, 2011, 11:11 AM

I can get to work about sli option problem only at weekend. you have to wait.

-=LeKtoR=- your помощь will be рекваерд

AthlonX2 · Nov 16, 2011, 11:20 AM

going to attempt this on CHIII soon hopefully it pans out as expected. do i need to use a specific forceware driver?

Sukram · Nov 16, 2011, 11:59 AM

Hrmpf - due to this tool: http://www.nirsoft.net/utils/bluescreenview.zip I found out that the VIA audiodriver was the bug - I updatetd and the next try it worked ... seems not to be a problem with HyperSLI - thank you anatolymik for you quick response

Greetings,

Sukram.

ShadySWE · Nov 16, 2011, 01:48 PM

Quote:

Originally Posted by anatolymik

do you use sli bridges?

Yes! I also use a SLI-bridge. It is kind of old though, could it be a problem? It would be really nice if you looked into the problem, I have to buy a new motherboard otherwise.

ShadySWE · Nov 16, 2011, 01:51 PM

Quote:

Originally Posted by -=LeKtoR=-

i have P8P67-M and sli doesn't work

Please tell if you get it to work. We seem to have the exact same problem. What kind of grapic cards are you using? You got Win7? What NVIDIA-drivers?

-=LeKtoR=- · Nov 16, 2011, 01:56 PM

Quote:

What kind of grapic cards are you using? You got Win7? What NVIDIA-drivers?

1. Gigabyte GeForce 470 super OC (700 Mhz)
2. Palit 470 (609 Mhz)
Win 7 64 bit and 285.62 or 285.79(beta)

anatolymik
Ok, ready to help...=\

chasem1991 · Nov 16, 2011, 06:42 PM

Soo.... This works great for me.

Current setup:
MOBO: Gigabyte 890FXA-UD5
Video Cards: 2x PNY 560 Ti OC

This is where it gets great. I use VMware ALOT. When I try to start my VM's I get an error from VMware Workstation. I can start Windows without HyperSLI enabled and they work fine. What goes on with AMD-V with this patch?

zuniggy · Nov 17, 2011, 02:58 AM

Quote:

Originally Posted by zuniggy

Running into same issue many have posted to.. SLI option not showing in Nvidia Conrol Panel. Have completed every step listed in previous threads with the latest being the following:

1. Enabled VT in Bios (running Intel DP45SG Extreme Motherboard w/ 2 GTX 260)
2. Unistalled all previous Nvidia drivers (running clean sweeper in safe mode), then rebooted.
3. installed HyperSli 0.7, then rebooted to win 7 SLI option
4. installed latest Nvidia driver (285.79) and rebooted to win 7 SLI option... still no SLI option in Nvidia Control Pannel.
5. Ran "Update" Hyper SLI 0.7 a second time just to make sure.... rebooted and still no SLI.
Note: i have a GTX 260 core 218 and a GTX 260 regular hooked up with SLI bridge installed.

My GPU-Z shows both GPU's installed and physx checked (attached snap shots)... but SLI still shows disabled. Hyper SLI control panel is also running in taskbar. I'm starting to wonder if my mother board will not run SLI regardless of Hyper being installed.. even though it runs crossfire and has 2 PCI-E 2.0 slots. Please help...any other ideas?

Guys,
I noticed this on my GPU-Z screen shots....Does it make a difference that the BIOS on my video cards dont match? Could this be the source of Nvidia not giving me the SLI Enable option?

jesseleite · Nov 17, 2011, 04:12 AM

I have posted a few time just to say Thank you but a few pages ago someone wanted to confirm 3 way SLI works....it does.

AMD 1100T
3X GTX 580's on liquid
Crosshair 4 extreme
Creative Titanium X-FI

sorry for the large pic...two monitors

Horrux · Nov 17, 2011, 04:17 AM

Quote:

Originally Posted by jesseleite

I have posted a few time just to say Thank you but a few pages ago someone wanted to confirm 3 way SLI works....it does.

AMD 1100T
3X GTX 580's on liquid
Crosshair 4 extreme
Creative Titanium X-FI

sorry for the large pic...two monitors

http://i913.photobucket.com/albums/a...e/Untitled.png

What kind of GPU utilization do you get on those when gaming?

johnspack · Nov 17, 2011, 04:46 AM

Holy moley! 3 gtx580s.... I drool thinking about that.....

jesseleite · Nov 17, 2011, 04:50 AM

Quote:

Originally Posted by Horrux

What kind of GPU utilization do you get on those when gaming?

I'm probably confused on how to tell (I'm happy to check for you), but I have video sink on because my fps in bf3 causes video tearing. FPS usually in the 80-90's in bf3 ultra settings 1920 X1080

jesseleite · Nov 17, 2011, 05:01 AM

I figured it out sorry! in Precision, in BF3 I'm averaging 40% .

cards run 45c (35C at idle)

my only regret was not benching on each Hyper SLI.

BTW- without Hyper SLI I was using the Hydra Chip...OMG what a hunk of junk...you have to wait for drivers to be released for each game.

AthlonX2 · Nov 17, 2011, 10:28 AM

heads up if anyone doesnt know this doesnt work with 285.79

Z-FiRE · Nov 17, 2011, 11:33 AM

Guys, you sure HyperSLI works great with P45 chipset ?

I'm using "Asus P5Q Deluxe" with "BIOS v2301" and "Intel Chipset Inf Update Program V9.1.1.1014" : games are still crashing when SLI is activated. They works great with SLI desactivated... not matter SLI surround or not...

RiC@RDOC · Nov 17, 2011, 12:53 PM

Quote:

Originally Posted by AthlonX2

heads up if anyone doesnt know this doesnt work with 285.79

What are you talking about? HyperSLI works perfectly fine with the latest driver 285.79 for tons of people.

Quote:

Originally Posted by Z-FiRE

Guys, you sure HyperSLI works great with P45 chipset ?

I'm using "Asus P5Q Deluxe" with "BIOS v2301" and "Intel Chipset Inf Update Program V9.1.1.1014" : games are still crashing when SLI is activated. They works great with SLI desactivated... not matter SLI surround or not...

Many people including me are using P5Q boards with HyperSLI without problems, add your complete system specs and describe your issue more thoroughly.

AthlonX2 · Nov 17, 2011, 02:14 PM

Quote:

Originally Posted by RiC@RDOC

What are you talking about? HyperSLI works perfectly fine with the latest driver 285.79 for tons of people

doesnt work on mine had to revert back to 285.62

Z-FiRE · Nov 17, 2011, 03:18 PM

Quote:

Originally Posted by RiC@RDOC

Many people including me are using P5Q boards with HyperSLI without problems, add your complete system specs and describe your issue more thoroughly.

With wich BIOS version and chipset drivers version please ?

My described issue here or start in this thread page 15 number 361 then #369

Thanks

dajife · Nov 17, 2011, 04:07 PM

Quote:

Originally Posted by AthlonX2

doesnt work on mine had to revert back to 285.62

Same to me, only 285.79 doesnt work.

Rampage Formula X48 with 2 8800GT

Nov 16, 2011, 07:04 AM	#453
anatolymik Join Date: Jun 2009 Posts: 1,420 (0.99/day) Thanks: 98 Thanked 781 Times in 306 Posts	do you use sli bridges? __________________ HyperSLI 0.9 HyperSLI 0.96

Nov 16, 2011, 07:09 AM	#454
-=LeKtoR=- Join Date: Nov 2011 Posts: 6 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Yep Last edited by -=LeKtoR=-; Nov 16, 2011 at 07:18 AM.

Nov 16, 2011, 11:11 AM	#457
anatolymik Join Date: Jun 2009 Posts: 1,420 (0.99/day) Thanks: 98 Thanked 781 Times in 306 Posts	I can get to work about sli option problem only at weekend. you have to wait. -=LeKtoR=- your помощь will be рекваерд __________________ HyperSLI 0.9 HyperSLI 0.96

System Name:	ZuNiggy
Processor:	Intel Core 2 Quad 9300
Motherboard:	Intel DP45SG Extreme (w/ 2 PCI 2.0 x 16 slot)
Cooling:	5 fans
Memory:	4 gigs 1333Mhz
Video Card:	1-GTX 260 core 216, 1-GTX 260
Hard Disk:	150 gig raptor
CRT/LCD Model:	24"
Case:	Coolmaster
PSU:	BFG 750 Watts
Software:	window 7

System Name:	An experiment in continuous upgrading
Processor:	Intel Core i7 2600k @ 4.2 Ghz \| Phenom II X4 965 \| Phenom II X4 965
Motherboard:	MSI P67A-GD53 \| MSI 990FXA-GD80 \| Asus M4A79 Deluxe
Cooling:	Noctua NH-D14 \| Zalman CNPS10x \| Coolermaster*212+
Memory:	Kingston KHX1866C9D3K2 \|*8Gb \| 8Gb
Video Card:	MSI GTX 570 oc x 2 (SLI) \| Sapphire Radeon 7970 + GTX 460 \| Radeon 4870 1Gb
Hard Disk:	Crucial M4 120gb Sata3 SSD + WD Caviar black 1Tb + 1.5Tb \| WD Caviar Black 1Tb x 3 \| WD Blue 500gb
Optical Drive:	DVD \| DVD \| DVD
CRT/LCD Model:	Samsung S23A700D 120hz + nVidia 3D Vision + 17" Acer secondary LCD \| 40" Sony 1080p TV \| Sam. 2233rz
Case:	Antec 1200 \| Lian-Li PC-8 \| Antec 302
Sound Card:	Auzentech Prelude X-Fi + Senn. PC360 G4ME \| Prelude X-Fi + Home theater \| Creative HS-1200
PSU:	Corsair TX850W \| Corsair TX 750 \| OCZ 700
Software:	About 400 top-rated games. \| 150 top-rated games \| No games
Benchmarks:	No time for benching, I prefer gaming.

Nov 16, 2011, 09:03 AM	#455
E-WoK Join Date: Nov 2011 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	i have the same problem with p55 board. installed nvidia driver after complete deinstallation with driver sweaper and also tried sli patch 1.5 and hypersli 0.6 and 0.7. the option "sli" never appeared in nvidia controle panel. http://www.techpowerup.com/forums/sh...&postcount=414

Nov 16, 2011, 10:32 AM	#456
Sukram Join Date: May 2011 Posts: 21 (0.03/day) Thanks: 10 Thanked 1 Time in 1 Post	Hallo, my Problem: HyperSLI 0.7, Windows 7 64 Ultimate, driver 285.79, 2x450 GTS, SLI Bridge, SLI activated, when I start TMPGEnc 5.0.6.38 Video Mastering and want to use CUDA-cores for decoding MPEG 1,2, and 4 I get a bluescreen and a reset ... any suggestions? Everything else works perfekt ... Thanx a lot, Sukram.

Nov 16, 2011, 11:20 AM	#458
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.25/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	going to attempt this on CHIII soon hopefully it pans out as expected. do i need to use a specific forceware driver?

Nov 16, 2011, 11:59 AM	#459
Sukram Join Date: May 2011 Posts: 21 (0.03/day) Thanks: 10 Thanked 1 Time in 1 Post	Hrmpf - due to this tool: http://www.nirsoft.net/utils/bluescreenview.zip I found out that the VIA audiodriver was the bug - I updatetd and the next try it worked ... seems not to be a problem with HyperSLI - thank you anatolymik for you quick response Greetings, Sukram.

Nov 16, 2011, 06:42 PM	#463
chasem1991 Join Date: Nov 2011 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Soo.... This works great for me. Current setup: MOBO: Gigabyte 890FXA-UD5 Video Cards: 2x PNY 560 Ti OC This is where it gets great. I use VMware ALOT. When I try to start my VM's I get an error from VMware Workstation. I can start Windows without HyperSLI enabled and they work fine. What goes on with AMD-V with this patch?

Nov 17, 2011, 04:12 AM	#465
jesseleite Join Date: Apr 2011 Posts: 25 (0.03/day) Thanks: 6 Thanked 6 Times in 6 Posts	I have posted a few time just to say Thank you but a few pages ago someone wanted to confirm 3 way SLI works....it does. AMD 1100T 3X GTX 580's on liquid Crosshair 4 extreme Creative Titanium X-FI sorry for the large pic...two monitors

Nov 17, 2011, 04:46 AM	#467
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,724 (1.81/day) Thanks: 282 Thanked 750 Times in 516 Posts System Specs	Holy moley! 3 gtx580s.... I drool thinking about that..... __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260

System Name:	Blacknet
Processor:	i7 950@ 4.1GHz
Motherboard:	Asus Rampage II Gene
Cooling:	Noctua NH-D14, 8 case fans
Memory:	24GB gskill ripjaws@ 1800mhz
Video Card:	Evga GTX480 + GTX260 Physx + TrackIR 5
Hard Disk:	WD Black 1TB 64mb cache + Spinpoint F1 750g backup + 2TB Seagate backup + 320GB Seagate backup
Optical Drive:	LG BH12LS38 Blu Ray burner
CRT/LCD Model:	Syncmaster 2443BW 1920x1200 Lcd + 19" ViewSonic Lcd
Case:	Antec 1200
Sound Card:	Onboard
PSU:	Silverstone 850Watt Strider+ Modular
Software:	Win7 x64 SP1 Ultimate
Benchmarks:	Time to upgrade to 680s....

Nov 17, 2011, 05:01 AM	#469
jesseleite Join Date: Apr 2011 Posts: 25 (0.03/day) Thanks: 6 Thanked 6 Times in 6 Posts	I figured it out sorry! in Precision, in BF3 I'm averaging 40% . cards run 45c (35C at idle) my only regret was not benching on each Hyper SLI. BTW- without Hyper SLI I was using the Hydra Chip...OMG what a hunk of junk...you have to wait for drivers to be released for each game.

Nov 17, 2011, 10:28 AM	#470
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.25/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	heads up if anyone doesnt know this doesnt work with 285.79

Nov 17, 2011, 11:33 AM	#471
Z-FiRE Join Date: Nov 2011 Posts: 9 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts	Guys, you sure HyperSLI works great with P45 chipset ? I'm using "Asus P5Q Deluxe" with "BIOS v2301" and "Intel Chipset Inf Update Program V9.1.1.1014" : games are still crashing when SLI is activated. They works great with SLI desactivated... not matter SLI surround or not...

System Name:	Bigfoot
Processor:	Q6600@3.2Ghz
Motherboard:	P5Q Pro Turbo
Cooling:	Artic Cooling
Memory:	4Gb GSkill DDR2 1066Mhz
Video Card:	2xGTX460 1Gb HyperSLI
Hard Disk:	3x500Gb
Optical Drive:	Dvd-Rw/Dvd
CRT/LCD Model:	22'' LG/ 32'' LG
Case:	Nox Coolbay 25
Sound Card:	Onboard
PSU:	Corsair TX-850W
Software:	Win7 64/XP 32

Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem enabling SLI with 2 480GTX's	hv43082	NVIDIA	2	Sep 30, 2010 05:55 AM
GTS250 and 9800gtx+ non SLI?	Black Haru	NVIDIA	4	Feb 25, 2010 01:39 AM
Galaxy Ready with nForce 740i SLI Motherboards, Integrated 9400 GT and SLI on Offer	btarunr	News	8	Oct 16, 2008 03:49 PM
Enabling SLI	Flava0ne	NVIDIA	22	Aug 21, 2008 10:40 PM
SLI disabled on 1697 motherboards	persnikitty	Motherboards & Memory	5	May 11, 2006 02:10 AM