HyperSLI (Enabling SLI on non-sli motherboards) - Page 21

bassmouse · Nov 21, 2011, 05:02 PM

Hi, I have installed hypersli 0.7. everything seems fine when i tried to enable sli. However, when I tried to run 3dmarks vantage and some old games , for example, Tom Clancy's H.A.W.X. It shows me the flashing screen and lagging seriously. May I know why? my driver is 285.62 and 2*GTX460. BTW, when I running NEED FOR SPEED: THE RUN and BF3, they both acting normally, however, just cant tell the differences between sli and without sli. PLZ help!

phoen · Nov 21, 2011, 05:33 PM

Quote:

Originally Posted by bassmouse

Hi, I have installed hypersli 0.7. everything seems fine when i tried to enable sli. However, when I tried to run 3dmarks vantage and some old games , for example, Tom Clancy's H.A.W.X. It shows me the flashing screen and lagging seriously. May I know why? my driver is 285.62 and 2*GTX460. BTW, when I running NEED FOR SPEED: THE RUN and BF3, they both acting normally, however, just cant tell the differences between sli and without sli. PLZ help!

Motherboard ?

bassmouse · Nov 22, 2011, 12:37 AM

Quote:

Originally Posted by phoen

Motherboard ?

Gigabyte 890fx-ud3

AthlonX2 · Nov 22, 2011, 02:27 AM

flip your sli bridge see if it helps

bassmouse · Nov 22, 2011, 02:42 AM

Quote:

Originally Posted by AthlonX2

flip your sli bridge see if it helps

Thanks for that. But I dont think that is the problem. My sli bridge is sitting very tight. Moreover, I have some feeling about the reason that maybe coming from the driver. I mean, hypersli 0.7 beta doesnt works well with 285.62. I will try to roll back the previous one and see how I go.

zuniggy · Nov 22, 2011, 02:55 AM

Quote:

Originally Posted by -=LeKtoR=-

It works!!

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

AthlonX2 · Nov 22, 2011, 03:01 AM

its dependant on your motherboard

zuniggy · Nov 22, 2011, 03:27 AM

Quote:

Originally Posted by AthlonX2

its dependant on your motherboard

p45 series... intel DP45SG. Bios recognizes both cards at 8x each, but doesn't allow me to physically change the speeds. Any idea if there is another program for this or am I SOL?

AthlonX2 · Nov 22, 2011, 03:32 AM

AFAIK there were only a few SLI boards that enabled you to change lane assignment,your is on the SOL list

bassmouse · Nov 22, 2011, 05:30 AM

I got that problem solved...dont know how i did lmfao

oxy93n · Nov 22, 2011, 12:23 PM

Quote:

Originally Posted by zuniggy

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

and i bet x8-x8 is better then x16-x4

i have seen many tests where x16-x16 and x8-x8 have same framerates

only when u use 3d vision and play at 5760x1080 x16-x16 is better

so when u use single monitor and sli dont worry about x16-x4 use your x8-x8 its fast enough

AthlonX2 · Nov 22, 2011, 12:29 PM

+1 to oxy.

SetsunaFZero · Nov 22, 2011, 01:04 PM

Quote:

Originally Posted by zuniggy

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

the performance difference from x16-16 to x8-x8 is not even close to 1% (benchmark with gtx580 sli) google for some benches if u dont believe

Yimmeryams · Nov 22, 2011, 03:36 PM

Quote:

Originally Posted by SetsunaFZero

the performance difference from x16-16 to x8-x8 is not even close to 1% (benchmark with gtx580 sli) google for some benches if u dont believe

It matters if you're playing at a high resolution.

If you run some benchmarks of performance at 1024x768 at 8-8, and then at 16-16, there will be very little difference.

If you run some benchmarks of performance at 1920x1080, 2560x1440, or 4096x2160, especially in dual- or tri-monitor setups, you will notice a much larger difference.

Hacko · Nov 23, 2011, 12:04 AM

Quote:

Originally Posted by Z-FiRE

Guys, you sure HyperSLI works great with P45 chipset ?

I'm using "Asus P5Q Deluxe" with "BIOS v2301" and "Intel Chipset Inf Update Program V9.1.1.1014" : games are still crashing when SLI is activated. They works great with SLI desactivated... not matter SLI surround or not...

Quote:

Originally Posted by AthlonX2

yes should work

¿?¿?

Work or not?????

AthlonX2 · Nov 23, 2011, 12:46 AM

no guarantee's but it seems HyperSLI is working on about every chipset so far.google around and see if anyone else has it running on P45

zuniggy · Nov 23, 2011, 02:10 AM

Quote:

Originally Posted by AthlonX2

no guarantee's but it seems HyperSLI is working on about every chipset so far.google around and see if anyone else has it running on P45

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

ShadySWE · Nov 23, 2011, 02:38 AM

Quote:

Originally Posted by zuniggy

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

Try to turn off USB 3.0 aswell. For me with a p67 it worked!

phoen · Nov 23, 2011, 06:15 AM

Quote:

Originally Posted by zuniggy

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

SLI running @ x8 x8 on Maximus II Formula P45, HyperSLI work perfectly.

Hacko · Nov 23, 2011, 12:31 PM

I have not found anything about SLI compatibility with P5Q Deluxe, anyone have this motherboard and a new SLI with last drivers???? within a week I'm going to buy an SLI and I do not want to go wrong.

Canio · Nov 23, 2011, 01:51 PM

Hi All,

Just new to the forum but being lurking for a while and came across this thread.
Not sure if i understand this correctly but is HyperSLI used to enable SLI on crossfire boards ?
As I currently have a Gigabyte GA-P55 USB3 board which i blindly purchased last year not knowing it didn’t have SLI.
I’m have a GTX460, windows 7 x64 with Nvidia Beta drivers 285.79.
Would this program enable SLI on this board ?

Thanks in advance,
Canio

phoen · Nov 23, 2011, 04:53 PM

Quote:

Originally Posted by Canio

Hi All,

Just new to the forum but being lurking for a while and came across this thread.
Not sure if i understand this correctly but is HyperSLI used to enable SLI on crossfire boards ?
As I currently have a Gigabyte GA-P55 USB3 board which i blindly purchased last year not knowing it didn’t have SLI.
I’m have a GTX460, windows 7 x64 with Nvidia Beta drivers 285.79.
Would this program enable SLI on this board ?

Thanks in advance,
Canio

System requirements:
Intel processor with Virtualization Technology (VT-x)

So, if you have Virtualization Technology yes i guess.

chemburn · Nov 23, 2011, 07:35 PM

So I am wondering the differences between HyperSli 0.1, 0.6, 0.7 ect. My guess is that if you find instability for one version you try the other? .7 I have had some crashes with it and I don't remember them with .6 so should I try it again or is it just not compatible with the newer Nvidia drivers?

Thanks

anatolymik · Nov 24, 2011, 02:20 AM

Quote:

Originally Posted by chemburn

So I am wondering the differences between HyperSli 0.1, 0.6, 0.7 ect. My guess is that if you find instability for one version you try the other? .7 I have had some crashes with it and I don't remember them with .6 so should I try it again or is it just not compatible with the newer Nvidia drivers?

Thanks

what kind of crashes?

chemburn · Nov 24, 2011, 02:22 AM

Quote:

Originally Posted by anatolymik

what kind of crashes?

Everything graphical stops I can still hear audio but it never recovers. It is possible it has nothing to do with HyperSli and its the newer drivers but that's been happening lately

Nov 21, 2011, 05:02 PM	#501
bassmouse Join Date: Nov 2011 Posts: 6 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Hypersli 0.7 Problem with apps and games Hi, I have installed hypersli 0.7. everything seems fine when i tried to enable sli. However, when I tried to run 3dmarks vantage and some old games , for example, Tom Clancy's H.A.W.X. It shows me the flashing screen and lagging seriously. May I know why? my driver is 285.62 and 2*GTX460. BTW, when I running NEED FOR SPEED: THE RUN and BF3, they both acting normally, however, just cant tell the differences between sli and without sli. PLZ help!

System Name:	Betaku
Processor:	Intel® Core™ i7-3770K @ 4.80Ghz 1.35v
Motherboard:	MSI Big Bang Z77 MPower
Cooling:	Rad: XSPC RX360 - Pump/Res: Swiftech Maelstrom + MCP35X - Wb: EK-Supremacy Plexi/Nickel
Memory:	Avexir MPower Edition 16GB @ 2400Mhz
Video Card:	ZOTAC GeForce GTX 680 AMP! Edition 2GB
Hard Disk:	Samsung 840 Pro 256GB / WD VelociRaptor 150GB / WD Caviar Green 1TB / WD Caviar Black 500GB
Optical Drive:	Plextor PX-880SA
CRT/LCD Model:	Asus VG236HE 120Hz - 23"
Case:	Corsair Obsidian 800D
Sound Card:	Realtek Onboard
PSU:	Corsair Professional Series HX850
Software:	Windows 7 Ultimate x64

System Name:	ZuNiggy
Processor:	Intel Core 2 Quad 9300
Motherboard:	Intel DP45SG Extreme (w/ 2 PCI 2.0 x 16 slot)
Cooling:	5 fans
Memory:	4 gigs 1333Mhz
Video Card:	1-GTX 260 core 216, 1-GTX 260
Hard Disk:	150 gig raptor
CRT/LCD Model:	24"
Case:	Coolmaster
PSU:	BFG 750 Watts
Software:	window 7

System Name:	ZuNiggy
Processor:	Intel Core 2 Quad 9300
Motherboard:	Intel DP45SG Extreme (w/ 2 PCI 2.0 x 16 slot)
Cooling:	5 fans
Memory:	4 gigs 1333Mhz
Video Card:	1-GTX 260 core 216, 1-GTX 260
Hard Disk:	150 gig raptor
CRT/LCD Model:	24"
Case:	Coolmaster
PSU:	BFG 750 Watts
Software:	window 7

System Name:	My PC
Processor:	AMD Phenom II X6 1090T
Motherboard:	ASUS Crosshair IV Formula
Cooling:	Watercooled
Memory:	4x4GB Corsair Vengance DDR3 1600
Video Card:	2x ASUS GTX 470
Hard Disk:	Corsair Force GT SSD 120GB
Optical Drive:	Samsung BD/DVD Combo
CRT/LCD Model:	3x ASUS VG236HE 120Hz 1080p
Case:	NZXT Phantom White + Phantom 410
Sound Card:	Soundblaster X-Fi Titanium Fatal1ty
PSU:	Silverstone SST-ST1200G Strider Gold Series 1200 Watt
Software:	Windows 7 Ultimate x64

Nov 22, 2011, 02:27 AM	#504
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	flip your sli bridge see if it helps

Nov 22, 2011, 03:01 AM	#507
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	its dependant on your motherboard

Nov 22, 2011, 03:32 AM	#509
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	AFAIK there were only a few SLI boards that enabled you to change lane assignment,your is on the SOL list

Nov 22, 2011, 05:30 AM	#510
bassmouse Join Date: Nov 2011 Posts: 6 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	I got that problem solved...dont know how i did lmfao

Nov 22, 2011, 12:29 PM	#512
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	+1 to oxy.

System Name:	bazinga xD
Processor:	AMD Bulldozer FX-8320 @ 4.4GHz
Motherboard:	Asus Sabertooth 990FX /NB 2.4GHz
Cooling:	EKL Alpenföhn Brocken
Memory:	Corsair Vengeance 16GB 1866Mhz
Video Card:	Asus HD7950 @1160/1530\|GT640 Physix
Hard Disk:	128GB Samsung 830 + 3TB HDD
CRT/LCD Model:	BenQ XL2411T @144Hz
Case:	Thermaltake M5
Sound Card:	Creative Sound Blaster X-Fi Titanium
PSU:	BeQuite 550W
Software:	Win7 x64

System Name:	Scoots
Processor:	AMD Phenom II X6 1090T @3.2GHz (Auto)
Motherboard:	NB: AMD 890FX + SB: AMD SB850 (Gigabyte GA-890FXA-UD5 rev. 2.0)
Cooling:	Air (ZALMAN CNPS10X Performa CPU Cooler)
Memory:	8GB (4x2GB) @1333 (G.SKILL ECO Series 2GB CL7D-4GBECO)
Video Card:	Nvidia GTX 460 1GB, x2 SLI (Palit GeForce GTX 460 Sonic Platinum 1GB + MSI Hawk GeForce GTX 460 1GB)
Hard Disk:	Western Digital Caviar Black 1.5TB 7200 RPM WD1501FASS
Optical Drive:	DVD (LITE-ON 24X DVD Writer iHAS224-06)
CRT/LCD Model:	[1680x1050][1920x1080] (Primary: ASUS VH226H Black 21.5" 16:9 + Secondary: HP w2207 16:10)
Case:	COOLER MASTER Storm Scout SGC-2000-KKN1-GP
PSU:	COOLER MASTER GX Series RS750-ACAAE3-US 750W 80 PLUS BRONZE Certified
Software:	Win7 x64 (Windows 7 Enterprise 64-bit (6.1, Build 7601))
Benchmarks:	Heaven Benchmark v2.5 Basic: 1578; DX11, 1920x1080, Fullscreen, High, Tess Normal

Processor:	Intel i7 3770k 3.5GHz 1155
Motherboard:	Sabertooth Z77
Cooling:	Corsair H100
Memory:	Kingston BLU DDR3 4Gb X2
Video Card:	SLI ASUS GTX 560 CU II
Hard Disk:	SSD Now Kingston 120Gb - 1Tb WD Caviar - 300Gb WD Caviar
Optical Drive:	2x LG GH22NS40
CRT/LCD Model:	ViewSonic VX1940w
Case:	Thermaltake Armor MX
PSU:	Apex Modular 800W
Software:	Win 7 Ultimate x64

Nov 23, 2011, 12:46 AM	#516
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	no guarantee's but it seems HyperSLI is working on about every chipset so far.google around and see if anyone else has it running on P45

Nov 23, 2011, 12:31 PM	#520
Hacko Join Date: Nov 2011 Posts: 9 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	I have not found anything about SLI compatibility with P5Q Deluxe, anyone have this motherboard and a new SLI with last drivers???? within a week I'm going to buy an SLI and I do not want to go wrong.

Nov 23, 2011, 01:51 PM	#521
Canio Join Date: Nov 2011 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Hi All, Just new to the forum but being lurking for a while and came across this thread. Not sure if i understand this correctly but is HyperSLI used to enable SLI on crossfire boards ? As I currently have a Gigabyte GA-P55 USB3 board which i blindly purchased last year not knowing it didn’t have SLI. I’m have a GTX460, windows 7 x64 with Nvidia Beta drivers 285.79. Would this program enable SLI on this board ? Thanks in advance, Canio

Nov 23, 2011, 07:35 PM	#523
chemburn Join Date: Nov 2011 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	So I am wondering the differences between HyperSli 0.1, 0.6, 0.7 ect. My guess is that if you find instability for one version you try the other? .7 I have had some crashes with it and I don't remember them with .6 so should I try it again or is it just not compatible with the newer Nvidia drivers? Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem enabling SLI with 2 480GTX's	hv43082	NVIDIA	2	Sep 30, 2010 05:55 AM
GTS250 and 9800gtx+ non SLI?	Black Haru	NVIDIA	4	Feb 25, 2010 01:39 AM
Galaxy Ready with nForce 740i SLI Motherboards, Integrated 9400 GT and SLI on Offer	btarunr	News	8	Oct 16, 2008 03:49 PM
Enabling SLI	Flava0ne	NVIDIA	22	Aug 21, 2008 10:40 PM
SLI disabled on 1697 motherboards	persnikitty	Motherboards & Memory	5	May 11, 2006 02:10 AM