techPowerUp! Forums

Go Back   techPowerUp! Forums > Other > techPowerUp! Club Forum

Reply
 
Thread Tools
Old Dec 2, 2011, 01:11 AM   #501
Super XP
2000 Posts
 
Super XP's Avatar
 
Join Date: Mar 2005
Location: Ancient Greece, Acropolis
Posts: 2,209 (0.74/day)
Thanks: 1,204
Thanked 534 Times in 362 Posts

System Specs

Quote:
Originally Posted by fullinfusion View Post
Did you install this bios?
CVF beta UEFI 9921 bios
Latest AGESA update for Bulldozer from AMD in this build:
More enhancements for Steam games etc.

I highly recommend any time you ppl flash the Crosshair V bios to load default settings first... reboot till the logo screen, flash the bios and do a restart when prompted to then shut down. power off the psu and Remove the cmos battery and move the jumper over for 5min then you'll never have any conflict.
So you have to remove the CMOS battery and move the jumper over for 5min? Never knew that before. I always just set bios to default before flashing. Oh, would the CMOS button in the back I/O plate work or do I have to do it the old way?
__________________
Super XP is offline  
Reply With Quote
Old Dec 2, 2011, 01:40 AM   #502
fullinfusion
1.21 Gigawatts
 
fullinfusion's Avatar
 
Join Date: Jan 2008
Location: CANADA
Posts: 5,464 (2.79/day)
Thanks: 2,701
Thanked 1,294 Times in 1,092 Posts

System Specs

Quote:
Originally Posted by Super XP View Post
So you have to remove the CMOS battery and move the jumper over for 5min? Never knew that before. I always just set bios to default before flashing. Oh, would the CMOS button in the back I/O plate work or do I have to do it the old way?
do it the old way. I was running into some buggy shit and doing what I recomend works like a charm.
__________________
CPU-Z validation sig pics temporarily blocked
fullinfusion is offline  
Reply With Quote
The Following User Says Thank You to fullinfusion For This Useful Post:
Old Dec 2, 2011, 01:44 AM   #503
fullinfusion
1.21 Gigawatts
 
fullinfusion's Avatar
 
Join Date: Jan 2008
Location: CANADA
Posts: 5,464 (2.79/day)
Thanks: 2,701
Thanked 1,294 Times in 1,092 Posts

System Specs

Quote:
Originally Posted by erocker View Post
Absolutely not. There's no way I ever claimed 700W at idle, that is ridiculous. I had about the same results as you. Refer to post #60 in this thread.
Sorry but I was sure you posted that number.
I must have read it some where else.... sorry.... old age ya know what I mean E!
__________________
CPU-Z validation sig pics temporarily blocked
fullinfusion is offline  
Reply With Quote
Old Dec 2, 2011, 02:07 AM   #504
erocker
Senior Moderator
 
erocker's Avatar
 
Join Date: Jul 2006
Location: Milwaukee, WI.
Posts: 31,960 (12.77/day)
Thanks: 2,793
Thanked 12,321 Times in 7,832 Posts

System Specs

Quote:
Originally Posted by fullinfusion View Post
Sorry but I was sure you posted that number.
I must have read it some where else.... sorry.... old age ya know what I mean E!
Lol, I know I posted a picture somewhere of the LCD on my UPS showing a lot of watts, but that was for the entire system. 400 watts coming out of something the size of a CPU is amazing but 700 watts.. maybe if there's something nuclear going on in there.
erocker is offline  
Reply With Quote
Old Dec 2, 2011, 03:02 AM   #505
KeAnS
25 Posts
 
KeAnS's Avatar
 
Join Date: Mar 2011
Location: U.K
Posts: 48 (0.06/day)
Thanks: 25
Thanked 3 Times in 3 Posts
Send a message via Yahoo to KeAnS

System Specs

Hi! i have gigabyte 880gma usb3 am3+ and i just want to know if the amd fx 4100 is supported with this kind of motherboard? Planning to upgrade soon.

thank you!
__________________
new in heatware

My 3D Benchmark
KeAnS is offline  
Reply With Quote
Old Dec 2, 2011, 03:17 AM   #506
AthlonX2
Better Than You
 
AthlonX2's Avatar
 
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.24/day)
Thanks: 730
Thanked 1,572 Times in 994 Posts

System Specs

Yup supports all BD chips

http://www.gigabyte.us/support-downl....aspx?pid=3817
AthlonX2 is offline  
Reply With Quote
The Following User Says Thank You to AthlonX2 For This Useful Post:
Old Dec 2, 2011, 06:43 AM   #507
KeAnS
25 Posts
 
KeAnS's Avatar
 
Join Date: Mar 2011
Location: U.K
Posts: 48 (0.06/day)
Thanks: 25
Thanked 3 Times in 3 Posts
Send a message via Yahoo to KeAnS

System Specs

Quote:
Originally Posted by AthlonX2 View Post
I've tried it but no any sign of booting or post on my monitor, when i hit the power button all fans are spinning except cpu fan and no any sounds from my tiny speaker inside the case.

Please help me out.

all parts are new,

these boards ran x4 840 cpu before and no any signs of problems...
__________________
new in heatware

My 3D Benchmark
KeAnS is offline  
Reply With Quote
Old Dec 2, 2011, 09:50 AM   #508
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

Quote:
Originally Posted by KeAnS View Post
I've tried it but no any sign of booting or post on my monitor, when i hit the power button all fans are spinning except cpu fan and no any sounds from my tiny speaker inside the case.

Please help me out.

all parts are new,

these boards ran x4 840 cpu before and no any signs of problems...
Did you flash the latest bios before installing the FX cpu?


Mine should be here by 1 o'clock I'll have all kinds of numbers for you lovely people later.

@ fullinfusion would you be willing to test powerdraw at 1.4v for me and with one core of the 6990 disabled?

I know it's not quite the same spec but I want a general idea of how hard I'm going to be hitting my psu, it's only 750w XD
pantherx12 is offline  
Reply With Quote
Old Dec 2, 2011, 10:06 AM   #509
KeAnS
25 Posts
 
KeAnS's Avatar
 
Join Date: Mar 2011
Location: U.K
Posts: 48 (0.06/day)
Thanks: 25
Thanked 3 Times in 3 Posts
Send a message via Yahoo to KeAnS

System Specs

Quote:
Originally Posted by pantherx12 View Post
Did you flash the latest bios before installing the FX cpu?


Mine should be here by 1 o'clock I'll have all kinds of numbers for you lovely people later.
Nope forgot to flash to the latest BIOS. Now i need to get a cpu that compatible to the mobo so i will flash to the latest bios.. but where should i get a cheap cpu atm..
__________________
new in heatware

My 3D Benchmark
KeAnS is offline  
Reply With Quote
Old Dec 2, 2011, 10:07 AM   #510
AthlonX2
Better Than You
 
AthlonX2's Avatar
 
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.24/day)
Thanks: 730
Thanked 1,572 Times in 994 Posts

System Specs

what happened to your 840?
AthlonX2 is offline  
Reply With Quote
Old Dec 2, 2011, 10:10 AM   #511
KeAnS
25 Posts
 
KeAnS's Avatar
 
Join Date: Mar 2011
Location: U.K
Posts: 48 (0.06/day)
Thanks: 25
Thanked 3 Times in 3 Posts
Send a message via Yahoo to KeAnS

System Specs

Sold it...
__________________
new in heatware

My 3D Benchmark
KeAnS is offline  
Reply With Quote
Old Dec 2, 2011, 10:17 AM   #512
KeAnS
25 Posts
 
KeAnS's Avatar
 
Join Date: Mar 2011
Location: U.K
Posts: 48 (0.06/day)
Thanks: 25
Thanked 3 Times in 3 Posts
Send a message via Yahoo to KeAnS

System Specs

Unless someone to want to trade for my 2x4gb 1600 ddr3 Ram g.skill ripjawsX Bnew just Arrived this morning for the Amd cpu..

Is this support cpu Athlon 64 3500+ (2.2GHz) AM2?
__________________
new in heatware

My 3D Benchmark

Last edited by KeAnS; Dec 2, 2011 at 10:24 AM.
KeAnS is offline  
Reply With Quote
Old Dec 2, 2011, 10:24 AM   #513
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

When my 8120 comes I'll have a 720 spare but I need to get cash for it unfortunately : [
pantherx12 is offline  
Reply With Quote
The Following User Says Thank You to pantherx12 For This Useful Post:
Old Dec 2, 2011, 10:46 AM   #514
AthlonX2
Better Than You
 
AthlonX2's Avatar
 
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.24/day)
Thanks: 730
Thanked 1,572 Times in 994 Posts

System Specs

maybe borrow a cpu from a friend just to flash bios
AthlonX2 is offline  
Reply With Quote
The Following User Says Thank You to AthlonX2 For This Useful Post:
Old Dec 2, 2011, 12:14 PM   #515
nt300
500 Posts
 
nt300's Avatar
 
Join Date: Jan 2010
Location: Toronto, ON. Canada
Posts: 731 (0.60/day)
Thanks: 628
Thanked 160 Times in 99 Posts

System Specs

Quote:
Originally Posted by KeAnS View Post
Nope forgot to flash to the latest BIOS. Now i need to get a cpu that compatible to the mobo so i will flash to the latest bios.. but where should i get a cheap cpu atm..
Take your motherboard to a computer store or shop and ask them if they will flash bios for you. It may cost you a little money but much cheaper than buy a new CPU.
__________________
nt300 is offline  
Reply With Quote
Old Dec 2, 2011, 01:18 PM   #516
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

Arrived an hour or so ago

Just got it up and running ( my heatsink is an ARSE to install)

Seems I got lucky and have one of the 1.3125v ones so shouldn't need massive increases in voltage for overclocking


Need a way to test how far the temperature sensors are off though, saying CPU is idling at 18 c ( ambient is that at the moment in my room) which isn't possible unless only one of the cores was running and with tiny amounts of voltage running through it.

What's the thermal limit of these cpus? Same as Phenom keep it under 55 for sweet spot (65 max) ?

Or is there a bit more wiggle room when it comes to these chips.

Thanks in advance to anyone who can answer
pantherx12 is offline  
Reply With Quote
Old Dec 2, 2011, 01:39 PM   #517
fullinfusion
1.21 Gigawatts
 
fullinfusion's Avatar
 
Join Date: Jan 2008
Location: CANADA
Posts: 5,464 (2.79/day)
Thanks: 2,701
Thanked 1,294 Times in 1,092 Posts

System Specs

Quote:
Originally Posted by pantherx12 View Post
Did you flash the latest bios before installing the FX cpu?


Mine should be here by 1 o'clock I'll have all kinds of numbers for you lovely people later.

@ fullinfusion would you be willing to test powerdraw at 1.4v for me and with one core of the 6990 disabled?

I know it's not quite the same spec but I want a general idea of how hard I'm going to be hitting my psu, it's only 750w XD
Im not sure how to dissable a core on the gpu. but sure if you still need me to give it a go and I have someone to instruct me im game to help.
__________________
CPU-Z validation sig pics temporarily blocked
fullinfusion is offline  
Reply With Quote
Old Dec 2, 2011, 01:59 PM   #518
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

Quote:
Originally Posted by fullinfusion View Post
Im not sure how to dissable a core on the gpu. but sure if you still need me to give it a go and I have someone to instruct me im game to help.

Thanks man, even with a single card should just be a case of dissabling crossfire.
pantherx12 is offline  
Reply With Quote
Old Dec 2, 2011, 02:08 PM   #519
fullinfusion
1.21 Gigawatts
 
fullinfusion's Avatar
 
Join Date: Jan 2008
Location: CANADA
Posts: 5,464 (2.79/day)
Thanks: 2,701
Thanked 1,294 Times in 1,092 Posts

System Specs

Nope, there is no option to disable x-fire for this gpu.
__________________
CPU-Z validation sig pics temporarily blocked
fullinfusion is offline  
Reply With Quote
Old Dec 2, 2011, 03:28 PM   #520
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

Quote:
Originally Posted by fullinfusion View Post
Nope, there is no option to disable x-fire for this gpu.
Ahh, well hopefully someone else can help

Currently testing 4ghz with stock volts, prime 95 on high whilst doing my usual internet buisiness.

Temps are 45c under-load under a tt silverarrow ( although I've done no temperature offsets)


Stable thus far : ]


But I can't help but notice that the CPU clocks down to 3ghz an awful lot even whilst under load, my phenoms never done this.

( happens at stock settings not just overclocked)

Is this a known bug?
pantherx12 is offline  
Reply With Quote
Old Dec 2, 2011, 03:53 PM   #521
AphexDreamer
Eligible for custom title
 
AphexDreamer's Avatar
 
Join Date: Jun 2007
Location: C:\Program Files (x86)\Aphexdreamer\
Posts: 5,614 (2.59/day)
Thanks: 812
Thanked 888 Times in 674 Posts

System Specs

Quote:
Originally Posted by pantherx12 View Post
Ahh, well hopefully someone else can help

Currently testing 4ghz with stock volts, prime 95 on high whilst doing my usual internet buisiness.

Temps are 45c under-load under a tt silverarrow ( although I've done no temperature offsets)


Stable thus far : ]


But I can't help but notice that the CPU clocks down to 3ghz an awful lot even whilst under load, my phenoms never done this.

( happens at stock settings not just overclocked)

Is this a known bug?
Which CPU did you get?

I think you need to disable the power management stuff and Turbo features.
__________________
Sent from my PC using chrome.
AphexDreamer is offline  
Reply With Quote
Old Dec 2, 2011, 04:05 PM   #522
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

Quote:
Originally Posted by AphexDreamer View Post
Which CPU did you get?

I think you need to disable the power management stuff and Turbo features.
I've disabled turbo how ever I don't want to disable power saving features as well, save a fair bit of money not running at crazy speeds all the time.

Never had a problem with it with the phenoms though, if they were underload the speed would stay constant.


@4.4ghz on stock volts at the moment.

Trying for more brb!
pantherx12 is offline  
Reply With Quote
Old Dec 2, 2011, 04:08 PM   #523
nt300
500 Posts
 
nt300's Avatar
 
Join Date: Jan 2010
Location: Toronto, ON. Canada
Posts: 731 (0.60/day)
Thanks: 628
Thanked 160 Times in 99 Posts

System Specs

Quote:
Originally Posted by pantherx12 View Post
I've disabled turbo how ever I don't want to disable power saving features as well, save a fair bit of money not running at crazy speeds all the time.

Never had a problem with it with the phenoms though, if they were underload the speed would stay constant.


@4.4ghz on stock volts at the moment.

Trying for more brb!
There's more you need to disable in the bios. Disable everything that has to do with power savings.

This is one reason why Bulldozers performed sort of bad in benchmarks because it kept on clocking itself down while benchmarking. But they would never tell you this and now you know for a fact.
__________________
nt300 is offline  
Reply With Quote
The Following 3 Users Say Thank You to nt300 For This Useful Post:
Old Dec 2, 2011, 05:11 PM   #524
Irony
500 Posts
 
Irony's Avatar
 
Join Date: Sep 2011
Location: COC WhiterunOrigin
Posts: 988 (1.62/day)
Thanks: 373
Thanked 243 Times in 197 Posts

System Specs

Quote:
Originally Posted by nt300 View Post
There's more you need to disable in the bios. Disable everything that has to do with power savings.

This is one reason why Bulldozers performed sort of bad in benchmarks because it kept on clocking itself down while benchmarking. But they would never tell you this and now you know for a fact.
I agree. My Phenom did that with my other board, regardless of what I set in BIOS. I believe it turned out to be CnQ causing the trouble
__________________
My Heatware

When life gives you lemons, burn Life's house down.
Irony is offline  
Reply With Quote
Old Dec 2, 2011, 05:18 PM   #525
pantherx12
Eligible for custom title
 
pantherx12's Avatar
 
Join Date: Jan 2009
Location: ENGLAND-LAND-LAND
Posts: 8,443 (5.26/day)
Thanks: 1,188
Thanked 1,705 Times in 1,375 Posts

System Specs

I'll run some benchmarks before I decide to disable it, fps in wind-helm in sky-rim has gone a hell of a lot though
pantherx12 is offline  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The AMD Phenom II OC'ers Club ShadowFold techPowerUp! Club Forum 14386 May 11, 2013 03:58 PM
AMD Overclockers Club AthlonX2 techPowerUp! Club Forum 2777 Dec 30, 2010 08:21 PM
Infrared Thermometer for OC'ers $33.99 thoughtdisorder Hot Deals 4 Sep 24, 2008 03:28 AM
AMD Phenom™ Club wiak techPowerUp! Club Forum 94 Dec 25, 2007 09:49 AM
AMD 3ghz club... p_o_s_pc techPowerUp! Club Forum 167 Nov 11, 2007 03:07 PM


All times are GMT. The time now is 08:45 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
no new posts