R.O.G Rig - Page 8

brandonwh64 · Dec 6, 2011, 07:53 PM

Quote:

Originally Posted by n0tiert

why ist that brandonwh64 ?

i feel good on my amd rig now

runs smooth and kicks ass.......
did you manage to paint those ram heatsinks ?

I have the paint but my wife was nice enough to get me a Z68 board so that kinda pushed me in the direction of sandy bridge. I may still paint the wire mesh on my case red and keep it like that until I get another ROG board but when that will happen I will never know

n0tiert · Dec 8, 2011, 09:38 AM

my DIY tempsensors panel for the watertemp of each loop

using 2 of those Phobya Red Tempsensors:

and this Phobya Frame:

they are not connected to the bitspower temp sensors yet, i need to get some black 2pin molex (male) connectors

t_ski · Dec 8, 2011, 12:12 PM

You can also cut the wires and solder them together. That's how I did the one for my system.

n0tiert · Dec 8, 2011, 12:18 PM

Quote:

Originally Posted by t_ski

You can also cut the wires and solder them together. That's how I did the one for my system.

i know, but with connectors you can easily disc. them .... just ordered some since i need a couple of 2,3,4 pin connectors for fans, temp, harddrives anyway .....
also i need to replace the HDD cage fan into a red one

since i had no luck with cathodes i´m trying now the smd leds to bring some light in the rig

X800 · Dec 8, 2011, 12:45 PM

Ooh that is one awsome rig you got .Nice work.

brandonwh64 · Dec 8, 2011, 12:58 PM

Those are real nice temp sensors!

Chicken Patty · Dec 8, 2011, 03:22 PM

Loving the temp sensors.

n0tiert · Dec 19, 2011, 06:13 AM

some few updates....

i bought a Lian Li C-02B CD/DVD Bezel, from it compatible list , it wasn´t usable for my case but it´s fit perfectly ! all you had to do is, dismount all 5 1/4 slot covers, hdd cage, add cd/dvd in the slot (push all way in to have a bit of room in front) slide the Bezel right side in(bottom due mount wings on each side of the bezel) center it from the front, and slide it up to position, push the cd/dvd back to the front, done.....

added a Aerocool Red Sharks 120 to the HDD cage...

also i added some fan covers on the koolance shroud (there where non included), if you buy them , make shure they are bended a bit on the mounting screw, since flat once won´t fit

n0tiert · Dec 19, 2011, 06:26 AM

next followups will be the Window sidepanel an the front door.... i already mentioned that i found a company that does window mods , after the holidays i´ll send him my sidepanel and the front door

on the front door i thought about cutting out the temp sensor area covered with dark smoked plexi so you´ll always have a view on the temps without opening the front door or leave it open.....
on the sidepanel only the area of the ssd/board/ res till upper rad will be shown and on the bottom right it will have the ROG logo engraved.... the plexi will be also dark smoked so if the rig is off you´ll see none......

Fuganater · Dec 19, 2011, 06:42 AM

Not doing your own window?

n0tiert · Dec 19, 2011, 06:46 AM

Quote:

Originally Posted by Fuganater

Not doing your own window?

well i could but he does it very pro since he also cuts the plexi like this, so its lined in the panel

and i don´t have the machine for it ..... same for engraving

orders he done on Lian-Li´s

http://www.stempel-hauser.de/page.php?43

or TJ07

http://www.stempel-hauser.de/page.php?59

Fuganater · Dec 19, 2011, 11:44 AM

Ahh ok. I missed that part. Should be pretty sweet then.

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Dec 8, 2011, 09:38 AM	#177
n0tiert Join Date: May 2008 Location: Germany Posts: 630 (0.34/day) Thanks: 368 Thanked 322 Times in 195 Posts System Specs	my DIY tempsensors panel for the watertemp of each loop using 2 of those Phobya Red Tempsensors: and this Phobya Frame: they are not connected to the bitspower temp sensors yet, i need to get some black 2pin molex (male) connectors __________________ Cosmos1000 Project R.O.G Rig Project XPredator Build Log Last edited by n0tiert; Dec 8, 2011 at 09:46 AM.

System Name:	Shaman of Sexy
Processor:	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard:	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling:	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory:	4GB Corsair Dominator CM2X2048-8500C5D
Video Card:	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Hard Disk:	RAID 0 Seagate
Optical Drive:	SAMSUNG DVD-Drive 20x
CRT/LCD Model:	Samsung 226BW 22"
Case:	CoolerMaster Cosmos RC-1000 in mod progress
Sound Card:	onboard
PSU:	Coba Nitrox 750W
Software:	Windows 7 Ultimate
Benchmarks:	http://service.futuremark.com/compare?3dmv=1056967

Dec 8, 2011, 12:12 PM	#178
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,849 (3.40/day) Thanks: 3,017 Thanked 3,315 Times in 2,531 Posts System Specs	You can also cut the wires and solder them together. That's how I did the one for my system. __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

Dec 8, 2011, 12:45 PM	#180
X800 Join Date: Dec 2004 Location: FIN Posts: 284 (0.09/day) Thanks: 44 Thanked 56 Times in 32 Posts System Specs	Ooh that is one awsome rig you got .Nice work. __________________ I came. I saw. I clicked.

System Name:	FPS Cruncher
Processor:	Intel 2700K (Sandy Bridge) Rev:D2
Motherboard:	Asus Maximus IV Gene-Z
Cooling:	Scythe Mugen 2 Rev. B CPU cooler
Memory:	Corsair Vengeance Ram DDR3 1866 8GB
Video Card:	Sapphire HD 6950 1Gb
Hard Disk:	2 SAMSUNG Spinpoint F4 in raid 0,Crucial m4 SSD as cache ,Maxtor 250gb
Optical Drive:	Samsung DvdRW SH-S203B
CRT/LCD Model:	Samsung Syncmaster2032BW
Case:	Thermaltake Mozart Tx case
Sound Card:	Asus Xonar DX
PSU:	Thermaltake ToughPower 750w
Software:	Win8 Pro 64Bit
Benchmarks:	3dmark06 P13046 =2900XT 3dmark vantage P4614 =2900XT

Dec 8, 2011, 12:58 PM	#181
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,572 (10.00/day) Thanks: 2,149 Thanked 5,342 Times in 3,697 Posts System Specs	Those are real nice temp sensors! __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

Dec 8, 2011, 03:22 PM	#182
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	Loving the temp sensors. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Dec 19, 2011, 06:13 AM	#183
n0tiert Join Date: May 2008 Location: Germany Posts: 630 (0.34/day) Thanks: 368 Thanked 322 Times in 195 Posts System Specs	some few updates.... i bought a Lian Li C-02B CD/DVD Bezel, from it compatible list , it wasn´t usable for my case but it´s fit perfectly ! all you had to do is, dismount all 5 1/4 slot covers, hdd cage, add cd/dvd in the slot (push all way in to have a bit of room in front) slide the Bezel right side in(bottom due mount wings on each side of the bezel) center it from the front, and slide it up to position, push the cd/dvd back to the front, done..... added a Aerocool Red Sharks 120 to the HDD cage... also i added some fan covers on the koolance shroud (there where non included), if you buy them , make shure they are bended a bit on the mounting screw, since flat once won´t fit __________________ Cosmos1000 Project R.O.G Rig Project XPredator Build Log Last edited by n0tiert; Dec 19, 2011 at 06:38 AM.

Dec 19, 2011, 06:26 AM	#184
n0tiert Join Date: May 2008 Location: Germany Posts: 630 (0.34/day) Thanks: 368 Thanked 322 Times in 195 Posts System Specs	next followups will be the Window sidepanel an the front door.... i already mentioned that i found a company that does window mods , after the holidays i´ll send him my sidepanel and the front door on the front door i thought about cutting out the temp sensor area covered with dark smoked plexi so you´ll always have a view on the temps without opening the front door or leave it open..... on the sidepanel only the area of the ssd/board/ res till upper rad will be shown and on the bottom right it will have the ROG logo engraved.... the plexi will be also dark smoked so if the rig is off you´ll see none...... __________________ Cosmos1000 Project R.O.G Rig Project XPredator Build Log Last edited by n0tiert; Dec 19, 2011 at 06:41 AM.

Dec 19, 2011, 06:42 AM	#185
Fuganater Join Date: Jul 2011 Location: All over the world! Posts: 323 (0.47/day) Thanks: 30 Thanked 233 Times in 87 Posts System Specs	Not doing your own window? __________________ Fugatech

System Name:	Rage
Processor:	Intel i7 2600K
Motherboard:	Asus Sabertooth P67
Cooling:	Custom Watercooling
Memory:	8GB G.Skill
Video Card:	Dual EVGA GTX 560Ti
Hard Disk:	2x SATA3 1TB Western Digital, 1x SATA3 320GB Wester Digital
Optical Drive:	Samsung BluRay
CRT/LCD Model:	Dual 22" Chimei
Case:	HAF X Modded
Sound Card:	Onboard FTW!
PSU:	Corsair 750W
Software:	Windows 7 Professional 64-bit

Dec 19, 2011, 11:44 AM	#187
Fuganater Join Date: Jul 2011 Location: All over the world! Posts: 323 (0.47/day) Thanks: 30 Thanked 233 Times in 87 Posts System Specs	Ahh ok. I missed that part. Should be pretty sweet then. __________________ Fugatech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP, my Rig new rig may have problems	strafter	System Builder's Advice	13	May 14, 2010 04:37 AM
i7 rig	n-ster	General Hardware	12	Feb 6, 2009 10:38 AM
I'd appreciate input on rig I might purchase. Where else to look for entire rig(used)	pswayze	General Hardware	4	Jul 25, 2008 10:18 AM
Gonna sell my rig soon for a AMD Tri/Quad-Core rig	ShadowFold	System Builder's Advice	10	Mar 31, 2008 03:36 AM
Transfer file from rig to rig	Irish_PXzyan	Networking & Security	16	Jan 9, 2008 01:26 AM