Help with +12v reading shows only 7.84v??

kciaccio · Dec 24, 2011, 03:27 PM

I just built an i7 2600k rig yesterday. Used the AI overclocker that Asus has and it clocked up to 4.4 GHz.

I am checking my voltages using AIDA64 and this is what it reports.

Voltage Values:
CPU Core 1.320 V
Aux 2.032 V
+3.3 V 3.344 V
+5 V 5.591 V
+12 V 7.843 V
-5 V -2.686 V
+5 V Standby 5.164 V
VBAT Battery 3.344 V
GPU +12V 12.188 V
GPU VRM 0.945 V

They do not seem right to me. Does anybody have an opinion?

c12038 · Dec 24, 2011, 03:36 PM

Looks like your PSU is screwed new PSU me thinks

sneekypeet · Dec 24, 2011, 03:40 PM

Get a hold of a digital multi-meter and test the wires in the 24-pin with the PC on. Never go by software

entropy13 · Dec 24, 2011, 03:48 PM

Yeah, software isn't that reliable. My 12V has been 8.10V for the P67A-GD65 board according to HWMonitor, even after changing PSUs. HWinfo32 gets a more realistic value however.

kciaccio · Dec 24, 2011, 03:52 PM

Thanks everybody. It seems like I would be getting blue screens if that reading was correct right?

sneekypeet · Dec 24, 2011, 03:56 PM

most likely yes!

entropy13 · Dec 24, 2011, 03:58 PM

Quote:

Originally Posted by kciaccio

Thanks everybody. It seems like I would be getting blue screens if that reading was correct right?

It would most likely not boot at all with that voltage, so you won't even get to run AIDA64 in the first place if those were accurate.

kciaccio · Dec 24, 2011, 04:22 PM

I wonder if Asus DIGI+ VRM Digital Power Design is throwing AIDA64 off. The board is so new and that technology might be throwing it for a loop.

sneekypeet · Dec 24, 2011, 04:24 PM

I'm sure Asus still has monitoring software, on the install CD or you can download it. It's still software and iffy, but I bet it might be more accurate

http://www.asus.com/Motherboards/Int...GEN3/#download

Kenshai · Dec 24, 2011, 04:30 PM

Quote:

Originally Posted by kciaccio

I wonder if Asus DIGI+ VRM Digital Power Design is throwing AIDA64 off. The board is so new and that technology might be throwing it for a loop.

Not really just associated with the Asus technology. A lot of motherboards read incorrectly when trying to read through software. As has already been stated check with a multimeter.

If you were getting 7-8v down your 12v line, you likely wouldn't boot.

Frick · Dec 24, 2011, 04:31 PM

As others have said, it wouldn't start with those voltages. Check out the volts on my very stable system:

So again, never trust software with this.

JrRacinFan · Dec 24, 2011, 04:33 PM

Quote:

Originally Posted by kciaccio

GPU 12V 12.188 V

This tells me the software isnt reading your board properly and this is the actual reading. Confirm with a multimeter if you wish.

newtekie1 · Dec 24, 2011, 04:34 PM

Quote:

Originally Posted by kciaccio

I wonder if Asus DIGI+ VRM Digital Power Design is throwing AIDA64 off. The board is so new and that technology might be throwing it for a loop.

All Software does is read values from a controller on the board and guess what those numbers mean, which means often times the software reads a value and puts it in the wrong spot.

kciaccio · Dec 24, 2011, 04:47 PM

Quote:

Originally Posted by Frick

As others have said, it wouldn't start with those voltages. Check out the volts on my very stable system:

http://i238.photobucket.com/albums/f...athim/volt.png

So again, never trust software with this.

LMAO....looks like you and I have the same issues.

Arctucas · Dec 24, 2011, 05:14 PM

You know, if you post on the AIDA64 forum, Tamos might be able to update the application so that it reads your sensor information properly...

Dec 24, 2011, 03:27 PM	#1
kciaccio Join Date: Mar 2009 Posts: 314 (0.21/day) Thanks: 59 Thanked 51 Times in 43 Posts System Specs	Help with +12v reading shows only 7.84v?? I just built an i7 2600k rig yesterday. Used the AI overclocker that Asus has and it clocked up to 4.4 GHz. I am checking my voltages using AIDA64 and this is what it reports. Voltage Values: CPU Core 1.320 V Aux 2.032 V +3.3 V 3.344 V +5 V 5.591 V +12 V 7.843 V -5 V -2.686 V +5 V Standby 5.164 V VBAT Battery 3.344 V GPU +12V 12.188 V GPU VRM 0.945 V They do not seem right to me. Does anybody have an opinion? __________________ CPU-Z validation sig pics temporarily blocked

Processor:	QuadCore Intel Core i7-2600K, 4433 MHz (43 x 103)
Motherboard:	Asus P8Z68 DELUXE GEN 3
Cooling:	Corsair H60
Memory:	8 gigs DDR3 Corsair Vengeance 1600
Video Card:	POWER COLOR HD6870 EYEFINITY 6 EDITION 2GB
Hard Disk:	KINGSTON HYPER X 120G SSD
Optical Drive:	ATAPI iHAS224
CRT/LCD Model:	Quad set of Acer X193X's AND 2 Dell P2210 - 22"
Case:	Silverstone Raven 2 WHITE LIMITED EDITION
PSU:	NZXT HALE 750
Software:	Windows 7 Ultimate 64 Bit

Dec 24, 2011, 03:40 PM	#3
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,986 (7.31/day) Thanks: 3,034 Thanked 5,482 Times in 3,948 Posts System Specs	Get a hold of a digital multi-meter and test the wires in the 24-pin with the PC on. Never go by software __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

Dec 24, 2011, 03:48 PM	#4
entropy13 Join Date: Mar 2009 Location: Philippines Posts: 3,423 (2.22/day) Thanks: 42 Thanked 1,132 Times in 713 Posts System Specs	Yeah, software isn't that reliable. My 12V has been 8.10V for the P67A-GD65 board according to HWMonitor, even after changing PSUs. HWinfo32 gets a more realistic value however. __________________ MSI P67A-GD65 (B3), Intel Core i5 2500K, Corsair H60, 2x MSI GTX 570 Twin Frozr II/OC, G.Skill RipjawsX (2x4GB) DDR3-1600 RAM, OCZ Agility 3 120GB + 2TB, Corsair AX1200, Corsair Carbide 400R MSI Z68MA-ED55, i5 2500K, Noctua NH-U9B SE2, Inno3D GTX 570, Corsair Vengeance LP 8GB, OCZ Agility 3 120GB + 1TB, Seasonic X660, Lian Li PC-V600FB The Big Useful List of Free Useful Programs To Use Usually For Free

Dec 24, 2011, 03:36 PM	#2
c12038 Join Date: Aug 2011 Posts: 34 (0.05/day) Thanks: 0 Thanked 7 Times in 6 Posts	Looks like your PSU is screwed new PSU me thinks

Processor:	Intel Core i7 3930K\|Intel Core i7 2600K
Motherboard:	Asus Rampage IV Extreme\|Asus Z68 Maximus IV Extreme-Z
Cooling:	Corsair H100\|Corsair H80
Memory:	G.Skill RipjawsZ 32GB (8x4GB) DDR3-1866 RAM\|G.Skill RipjawsX (4x4GB) DDR3-1600 RAM
Video Card:	3x MSI GTX 580 Lightning Xtreme Edition\|2x Palit GTX 580 + Inno3D GTX 580
Hard Disk:	OCZ Vertex 3 240GB, 4x 2TB\|Corsair Force GT 120GB, 2x 1TB, 500GB
Optical Drive:	LG 24x DVD-RW+/- with Lightscribe\|Lite-on 24x DVD-RW+/-
CRT/LCD Model:	3x 23" Chimei CMV-23LH LED\|LG 27" E2750V, LG 23" E2360V
Case:	Corsair Obsidian Series 800D\|Thermaltake Chaser MK-I
Sound Card:	onboard
PSU:	Thermaltake Toughpower 1350W 80PLUS SILVER\|Corsair AX1200 1200W 80PLUS GOLD
Software:	Windows 7 Ultimate 64-bit w/ Service Pack 1

Dec 24, 2011, 03:52 PM	#5
kciaccio Join Date: Mar 2009 Posts: 314 (0.21/day) Thanks: 59 Thanked 51 Times in 43 Posts System Specs	Thanks everybody. It seems like I would be getting blue screens if that reading was correct right? __________________ CPU-Z validation sig pics temporarily blocked

Dec 24, 2011, 03:56 PM	#6
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,986 (7.31/day) Thanks: 3,034 Thanked 5,482 Times in 3,948 Posts System Specs	most likely yes! __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Dec 24, 2011, 04:22 PM	#8
kciaccio Join Date: Mar 2009 Posts: 314 (0.21/day) Thanks: 59 Thanked 51 Times in 43 Posts System Specs	I wonder if Asus DIGI+ VRM Digital Power Design is throwing AIDA64 off. The board is so new and that technology might be throwing it for a loop. __________________ CPU-Z validation sig pics temporarily blocked

Dec 24, 2011, 04:24 PM	#9
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,986 (7.31/day) Thanks: 3,034 Thanked 5,482 Times in 3,948 Posts System Specs	I'm sure Asus still has monitoring software, on the install CD or you can download it. It's still software and iffy, but I bet it might be more accurate http://www.asus.com/Motherboards/Int...GEN3/#download __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	Current
Processor:	i5 2500k @ 4.5
Motherboard:	ASRock Z77 Extreme4
Cooling:	Xigmatek Gaia
Memory:	2x4G G-skill Sniper
Video Card:	GTX 680
Hard Disk:	128 Crucial M4, 1 TB Seagate Baracuda
Optical Drive:	Sony Optiarc
CRT/LCD Model:	Shimian Achieva 27"
Case:	Corsair 400R
Sound Card:	Onboard
PSU:	Corsais HX-620
Software:	Windows 7

Dec 24, 2011, 04:31 PM	#11
Frick Fishfaced Nincompoop Join Date: Feb 2006 Location: Sweden Posts: 7,873 (2.98/day) Thanks: 1,076 Thanked 1,443 Times in 1,149 Posts System Specs	As others have said, it wouldn't start with those voltages. Check out the volts on my very stable system: So again, never trust software with this. __________________ Typemachine: Acer Aspire One D250 \| Atom N280 1.6 Ghz \| 1GB DDR2 \| 160GB SATA \| 10.1' 1024 x 600 \| Lubuntu 12.10 Oldbox: HP D530 \| Pentium 4 2.8 Ghz \| 1GB DDR \| 40GB \| Windows XP "The 'gentle biker' look is overdone. I'm going for 'psycho hillbilly.' "

System Name:	Ongoing scavanging
Processor:	Sempron 140
Motherboard:	MSI 760GM-P23 (FX)
Cooling:	Somesuch
Memory:	2GB DDR3
Video Card:	HD 2400 Pro
Hard Disk:	160GB + 1TB
Optical Drive:	Yes
CRT/LCD Model:	19" 1280 x 1024
Case:	Wossname
Sound Card:	On board
PSU:	Wattchamacallit
Software:	Stuff

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Processor:	Intel Core i7 875K@4.0GHz(200x20)
Motherboard:	eVGA P55 FTW 200
Cooling:	Thermalright Ultra-120 Extreme w/ Corsair SP120 High Performance Edition
Memory:	8GB Corsair DDR3-1600 7-7-7-20
Video Card:	ASUS GTX 670 4GB DirectCU II @ 1015/3600
Hard Disk:	1TB Seagate 7200.12(OS), 3x 1.5TB Seagate 7200.11 in RAID 5
Optical Drive:	Lite-On Blu-Ray Combo Drive IHES108
CRT/LCD Model:	HP 25" 2509m 1080p LCD
Case:	Lian-Li Lancool Metal Boned K7 w/ Windowed Side Panel
Sound Card:	Onboard is good enough for me
PSU:	Corsair HX850
Software:	Windows 7 x64 Professional

Dec 24, 2011, 05:14 PM	#15
Arctucas Join Date: Jul 2006 Location: Cowtown, USSofA Posts: 1,627 (0.65/day) Thanks: 57 Thanked 275 Times in 216 Posts System Specs	You know, if you post on the AIDA64 forum, Tamos might be able to update the application so that it reads your sensor information properly... __________________ Whiskey-Tango-Foxtrot. over.

System Name:	It's just a computer
Processor:	i7 950 @4.2GHz
Motherboard:	eVGA Classified 3
Cooling:	D5, PA140.3, HK Rev. 3.0
Memory:	Mushkin 998966 Radioactive
Video Card:	2x eVGA 01G-P3-1373-AR in SLI
Hard Disk:	4x 64GB G2 SSD RAID 0
Optical Drive:	Samsung SH-S223L
CRT/LCD Model:	Samsung 305T Plus
Case:	Thermaltake Xaser VI
Sound Card:	Auzen X-Meridian 7.1 2G/Z-5500
PSU:	Corsair AX1200
Software:	Win7 Ultimate x64 SP1
Benchmarks:	3DM Vantage 36196

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Interesting -12V reading	bonzai_cyberninja	General Hardware	15	May 3, 2011 03:45 PM
Need Help. confused +12v and -12v	jigujigu	System Builder's Advice	40	Jun 21, 2008 02:48 PM
XP 32bit only shows 3GB with 4GB installed	OnBoard	Motherboards & Memory	28	Dec 9, 2007 06:10 PM
Please help recommend a 600w+ PSU with 30amp on the 12V rail!!	dafry	General Hardware	1	Aug 8, 2007 10:44 AM
My +12v rail is only 11.65 will this make my computer unstable	Live OR Die	General Hardware	19	Jul 22, 2007 02:44 PM