TechPowerUp GPU-Z 0.5.8 Released - Page 4

Steven B · Jan 21, 2012, 05:47 PM

higher leakage = higher temps but higher OC
Lower leakage=lower temps but usually low OC.

Bad leakage? that is not even a type of leakage. Every transistor has some type of leakage, that is why ES CPUs in previous gens to SB OC so much higher, because usually they had unlock TDPs. I woudl actually expect the higher binned cards for the same type to have lower ASIC if the leakage is what they say is quality of the silicon.

My ref gigabyte GTX 570 is 89.7%

i don't think ASIC refers to just leakage.
overclockers should want higher as higher leakage transistors usually can work faster, that is why they use them in very critical parts of teh GPU.

puma99dk| · Jan 21, 2012, 05:53 PM

Quote:

Originally Posted by Epsi

Do you guys no longer support Geforce 8600M GT?

http://gpuz.techpowerup.com/12/01/21/hsg.png

it works fine on my dad's laptop with a Nvidia GeForce 8600M GT

Steven B · Jan 21, 2012, 05:56 PM

BTW right now Ivy bridge has an issue where the leakage is just crazy, so its air/water clocks are coming out like SB. but on LN2 its like amazing compared to all previous intel platforms IMO. .

cristian.a · Jan 21, 2012, 06:03 PM

my radeon hd 6670 gddr5, say popup "ASIC quality reading not supported on this card."

Why, why, why ????????

edit:

claylomax · Jan 21, 2012, 06:04 PM

Quote:

Originally Posted by Jstn7477

Which one? The ASIC percentage is simply read off the chip.

And how do you do that? When I click the question mark I get the window to start the test, I just want to get the ASIC reading.

LightningJR · Jan 21, 2012, 06:04 PM

102% on a 560ti twin frozr II/OC

erocker · Jan 21, 2012, 06:11 PM

Stock volts. I've been running it like this since I got it. Water block should be here next week, hopefully it likes some extra volts.

Jstn7477 · Jan 21, 2012, 06:25 PM

Quote:

Originally Posted by claylomax

And how do you do that? When I click the question mark I get the window to start the test, I just want to get the ASIC reading.

Right click the title bar of the window (where it says TechPowerUp GPU-Z 0.5.8) to open a context menu that has the ASIC reading option.

claylomax · Jan 21, 2012, 06:37 PM

Quote:

Originally Posted by Jstn7477

Right click the title bar of the window (where it says TechPowerUp GPU-Z 0.5.8) to open a context menu that has the ASIC reading option.

Thank you! At last. http://www.youtube.com/watch?v=LsSS9VcMidA

jaredpace · Jan 21, 2012, 08:00 PM

Can you get vrm temperature sensor readings for the 7970 in gpuz?

Maban · Jan 21, 2012, 08:25 PM

So, who's got the lowest ASIC quality? My first 470 reads a massive 36.9%, which sounds about right. It was never a strong overclocker. Default VID of 1.037V can be overclocked to 725/1800 at stock volts or 775/1900 at 1.087V. Nothing too spectacular. Best I've ever gotten it was 850/1900 at I think 1.15V. It wasn't 100% stable and the card alone drew more than 400W in Furmark. (Don't worry I had the AXP on it and it never got above 75°C, worry about the VRMs though.)

My other 470 with a quality of 60.9% is a little better. Default VID is 0.975V. 725/1800 at 0.975V and 775/1900 at 1.037V.

radrok · Jan 21, 2012, 08:30 PM

It doesn't work for me on 6990s, it says "ASIC quality reading not supported on this card."
Same on an ASUS 6970 DirectCU II

sanadanosa · Jan 21, 2012, 08:34 PM

Quote:

Originally Posted by cristian.a

my radeon hd 6670 gddr5, say popup "ASIC quality reading not supported on this card."

Why, why, why ????????

edit:

Quote:

Originally Posted by radrok

It doesn't work for me on 6990s, it says "ASIC quality reading not supported on this card."
Same on an ASUS 6970 DirectCU II

Didn't you read this? "The next new feature is ASIC quality, designed for NVIDIA Fermi (GF10x and GF11x GPUs) and AMD Southern Islands (HD 7800 series and above),"

radrok · Jan 21, 2012, 08:44 PM

Nope sorry, totally missed it

Freedom4556 · Jan 21, 2012, 09:31 PM

I got 97.4% on an EVGA GTX 560 Ti 448 Core FTW
Currently running factory overclocked 797/975/1594 @ 1.013 V

This seems exceptionally good, am I right? Which would seem to support EVGA doing binning.

mad1394 · Jan 21, 2012, 09:39 PM

Quote:

Originally Posted by Freedom4556

I got 97.4% on an EVGA GTX 560 Ti 448 Core FTW
Currently running factory overclocked 797/975/1594 @ 1.013 V

This seems exceptionally good, am I right? Which would seem to support EVGA doing binning.

Yea well my POS Gigabyte gtx 460 which has given me a lot of headaches has an ASIC quality of 110.3%.

Disruptor4 · Jan 21, 2012, 09:50 PM

ASIC quality reading is not supported on this card.

Freedom4556 · Jan 21, 2012, 09:55 PM

Quote:

Originally Posted by mad1394

Yea well my POS Gigabyte gtx 460 which has given me a lot of headaches has an ASIC quality of 110.3%.

I wonder where Wizz is pulling this number from and what it was originally meant to represent?

W1zzard · Jan 21, 2012, 10:12 PM

Quote:

Originally Posted by Freedom4556

I wonder where Wizz is pulling this number from and what it was originally meant to represent?

it's from the gpu silicon, and it's used to calculate the gpu voltage.

"bad" gpus get a higher voltage so they make the default clock. "good" gpus can do it with lower voltage

as you've seen in this thread, the scale for nvidia isnt perfect yet, so i'll apply some fixes once I have more data that suggests the typical ranges of gpu leakages

trickson · Jan 21, 2012, 10:16 PM

Quote:

Originally Posted by W1zzard

it's from the gpu silicon, and it's used to calculate the gpu voltage.

"bad" gpus get a higher voltage so they make the default clock. "good" gpus can do it with lower voltage

as you've seen in this thread, the scale for nvidia isnt perfect yet, so i'll apply some fixes once I have more data that suggests the typical ranges of gpu leakages

Any chance for some old card support ? Like the HD5770 ?

HammerON · Jan 21, 2012, 10:47 PM

Curious to see what my two GTX 580's would show:

Looks like my second card should oc better than my first one in the SLI setup.

Thanks W1zz for this nice little enhancement

jaredpace · Jan 21, 2012, 10:56 PM

wiz any word on AMD 7900 series vrm temperature sensor readings in the next gpuz

W1zzard · Jan 21, 2012, 11:00 PM

Quote:

Originally Posted by trickson

Any chance for some old card support ? Like the HD5770 ?

hd 6000: probably
hd 5000 ... rv610: maybe

cristian.a · Jan 21, 2012, 11:38 PM

Quote:

Originally Posted by W1zzard

hd 6000: probably
hd 5000 ... rv610: maybe

Yes !!! i want to play too !!!!

trickson · Jan 21, 2012, 11:43 PM

Quote:

Originally Posted by cristian.a

Yes !!! i want to play too !!!!

Me too .

Jan 21, 2012, 05:47 PM	#76
Steven B Join Date: Sep 2005 Posts: 572 (0.20/day) Thanks: 11 Thanked 50 Times in 33 Posts	higher leakage = higher temps but higher OC Lower leakage=lower temps but usually low OC. Bad leakage? that is not even a type of leakage. Every transistor has some type of leakage, that is why ES CPUs in previous gens to SB OC so much higher, because usually they had unlock TDPs. I woudl actually expect the higher binned cards for the same type to have lower ASIC if the leakage is what they say is quality of the silicon. My ref gigabyte GTX 570 is 89.7% i don't think ASIC refers to just leakage. overclockers should want higher as higher leakage transistors usually can work faster, that is why they use them in very critical parts of teh GPU. Last edited by Steven B; Jan 21, 2012 at 05:55 PM.

Processor:	561 155watt TDP@ 4.8ghz 1.48vcore
Motherboard:	AS8 all modded / currently in RMA
Cooling:	PhaseChange R402a/ 10cc compressor/ -38c load at 4.8ghz
Memory:	Mushkin Redline PC4000 2 gig kit
Video Card:	6600gt vmodded
Hard Disk:	Raptor and Ultra 16 300
Optical Drive:	?
Case:	pc-65b
Sound Card:	audigy 2 zs plat
PSU:	powerstream 520 and neopower

System Name:	Lynni / Lynni-Win8-Test
Processor:	Intel Core i5-3750K @ 4.6ghz \| Bios: offset 0.045 \| CPU-Z: 1.232v \| Intel Pentium G860 @ 3,0ghz
Motherboard:	Asus Maximus V Extreme Bios 1707 \| ECS P67H2-A Black Series V1.1 \| SuperMicro C7Q67
Cooling:	Corsair H100 @ 2xNoctua NF-F12 PWM \| Intel Stock Cooler
Memory:	Corsair Vengeance LP 16gb (4x4gb) @ 1600mhz (9-9-9-24 T1) / Adata XPG™ Gaming v2.0 Series 2x2GB
Video Card:	Asus GTX670-DC2G-4GD5 @ 1015/1502mhz / EVGA GeForce 8800GTS 640mb / Asus EN9800GT/DI/1GD3/A
Hard Disk:	OS: Samsung 830Series 128gb SSD \| Gaming: WDC Green 500gb \| Anime/DATA: 2xWDC Green 2TB WD20EARX
Optical Drive:	Pioneer DVR-216DBK \| Samsung SH-B123L @ SATA
CRT/LCD Model:	Philips 221EL2 LED 21,5 inch Monitor & Philips 32inch LCD TV @ 1080p
Case:	Cooler Master HAF XB \| 1xNoctua NF-F12 PWM \| 2x Noctua NF-R8
Sound Card:	Asus Xonar Essence STX \| Creative Aurvana Live! \| Logitech Z-2300
PSU:	SeaSonic X-760 80PLUS \| Silverstone ST45SF-G Double GOLDIE :3
Software:	Windows 7 Ultimate SP1 x64 OEM - KIS2012CBE \o/ \| Win8 Pro 64bit @ Box - No SSD atm
Benchmarks:	3DMark11: Pxxxx - Unigine Heaven Benchmark: xxxx \| Nuth tested, yet!!!

Processor:	561 155watt TDP@ 4.8ghz 1.48vcore
Motherboard:	AS8 all modded / currently in RMA
Cooling:	PhaseChange R402a/ 10cc compressor/ -38c load at 4.8ghz
Memory:	Mushkin Redline PC4000 2 gig kit
Video Card:	6600gt vmodded
Hard Disk:	Raptor and Ultra 16 300
Optical Drive:	?
Case:	pc-65b
Sound Card:	audigy 2 zs plat
PSU:	powerstream 520 and neopower

Jan 21, 2012, 06:03 PM	#79
cristian.a Join Date: Nov 2010 Posts: 16 (0.02/day) Thanks: 3 Thanked 0 Times in 0 Posts System Specs	my radeon hd 6670 gddr5, say popup "ASIC quality reading not supported on this card." Why, why, why ???????? edit: Attached Thumbnails Last edited by cristian.a; Jan 21, 2012 at 06:10 PM.

Jan 21, 2012, 05:56 PM	#78
Steven B Join Date: Sep 2005 Posts: 572 (0.20/day) Thanks: 11 Thanked 50 Times in 33 Posts	BTW right now Ivy bridge has an issue where the leakage is just crazy, so its air/water clocks are coming out like SB. but on LN2 its like amazing compared to all previous intel platforms IMO. .

System Name:	pheny
Processor:	Phenom II x 2 550 c3
Motherboard:	Foxconn A85GM
Cooling:	stock
Memory:	4 x 1 GB DDR2 800 Mhz Saikano "kisoku"
Video Card:	IGP HD 4200
Hard Disk:	Wester Digital Caviar Blue 320 GB 16 MB cache
Optical Drive:	LG DVD RAW
CRT/LCD Model:	LCD LG W1943TE
Case:	I DON`T HAVE :(
Sound Card:	EDIFIER X100
PSU:	Saikano "Kanzen" Mass 500w
Software:	WINDOWS 7 X64

System Name:	Jaspe
Processor:	i7 3820 4.62Ghz 1.36v
Motherboard:	BIOSTAR TPower X79
Cooling:	Thermalright Archon Rev. A
Memory:	16Gb G.Skill Ripjaws 2000mhz
Video Card:	ATI HD7970
Hard Disk:	WD 600Gb Velociraptor
CRT/LCD Model:	Samsung 2433BW
Case:	Silverstone FT01B-W
Sound Card:	Onboard
PSU:	Antec Signature 650w
Software:	Windows 7 64

Jan 21, 2012, 06:04 PM	#81
LightningJR Join Date: Jun 2010 Location: North American land of the rising sun :) Posts: 155 (0.15/day) Thanks: 39 Thanked 41 Times in 30 Posts System Specs	102% on a 560ti twin frozr II/OC

Processor:	Intel Core i5-2500K @ 4.8Ghz
Motherboard:	MSI P67S-C43 LGA1155
Cooling:	Antec Kuhler 620 w/PP Scythe GTs
Memory:	4x8GB GSkill DDR3 1866Mhz CL10
Video Card:	EVGA GeForce 670 2GB
Hard Disk:	Sandisk Extreme 120GB & Samsung F3 1TB
Optical Drive:	Samsung Blu-Ray Drive
CRT/LCD Model:	23" Acer LCD/Sony 40" 1080p TV
Case:	Coolermaster CM690 II
Sound Card:	Integrated Realtek ALC892
PSU:	Tuniq Potency 750W 80+ Bronze

Jan 21, 2012, 06:11 PM	#82
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,930 (12.77/day) Thanks: 2,789 Thanked 12,304 Times in 7,823 Posts System Specs	Stock volts. I've been running it like this since I got it. Water block should be here next week, hopefully it likes some extra volts.

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

System Name:	Awesomesauce \| Laptop (Toshiba A665D-S6091) \| "The Shoebox"
Processor:	Intel Core i7-3770K @ 4.3GHz/1.18v \| AMD PII Mobile X4 X920 @ 2.3GHz\|AMD E-350 APU
Motherboard:	ASRock Z77 Extreme6 \| NWQAE S1G4 (880G/SB850) \| Gigabyte E350N-USB3
Cooling:	Thermaltake Water 2.0 Performer, 2x Cougar CF-V12HB + 5 Rosewill RFA-120-RL
Memory:	G.Skill RJ-X 16GB DDR3-2000 CL11 \| Stock 2*2GB DDR3-1066 CL7 \| 4GB DDR3-1333
Video Card:	XFX DD HD7950 3GB 1175/1500 1.2v w/ Accelero Xtreme 7970 \| ATI MR 5650 1GB DDR3 @ 550/900 \| 6310 IGP
Hard Disk:	Mushkin Chronos 240GB + Seagate Green 2TB \| WD Scorpio Black 750GB \| Samsung F1 1TB
Optical Drive:	ASUS 24x SATA \| Sony Optiarc AD-7703S 8x Labelflash \| Samsung Writemaster 22x SATA
CRT/LCD Model:	ASUS VG236HE 23" 120Hz 1080p \| 16.0" 1366*768 LED laptop glossy LCD \| Samsung 940BW
Case:	NZXT Source 210 \| Toshiba A665D \| Rosewill MI-01-BK ITX "shoebox"
Sound Card:	Realtek ALC898 \| Realtek ALC269 with harman/kardon speakers \| Realtek ALC892
PSU:	Rosewill CAPSTONE 550w (80Plus Gold) \| 75W 19.5v brick \| Seasonic 350w ITX
Software:	Windows 7 Pro x64 + Ubuntu 12.10 \| Windows 8 Pro x64 (laptop)
Benchmarks:	120FPS in the games I play? :P

Jan 21, 2012, 08:00 PM	#85
jaredpace Join Date: Sep 2009 Posts: 160 (0.12/day) Thanks: 68 Thanked 65 Times in 30 Posts	Can you get vrm temperature sensor readings for the 7970 in gpuz? __________________ “I would like for him to point out and quote specifically the portion of both pics that shows a bart as a 6800 series...” -EastCoasthandle

Jan 21, 2012, 08:25 PM	#86
Maban Join Date: Mar 2008 Location: Minnesota Posts: 1,925 (1.01/day) Thanks: 803 Thanked 554 Times in 362 Posts System Specs	So, who's got the lowest ASIC quality? My first 470 reads a massive 36.9%, which sounds about right. It was never a strong overclocker. Default VID of 1.037V can be overclocked to 725/1800 at stock volts or 775/1900 at 1.087V. Nothing too spectacular. Best I've ever gotten it was 850/1900 at I think 1.15V. It wasn't 100% stable and the card alone drew more than 400W in Furmark. (Don't worry I had the AXP on it and it never got above 75°C, worry about the VRMs though.) My other 470 with a quality of 60.9% is a little better. Default VID is 0.975V. 725/1800 at 0.975V and 775/1900 at 1.037V. Last edited by Maban; Jan 21, 2012 at 08:31 PM.

System Name:	I Dub Thee Infinity
Processor:	Intel Core i3-2120
Motherboard:	ASUS P8P67 WS Revolution
Cooling:	Corsair H80
Memory:	2x4GB 2400 Trident X
Video Card:	EVGA GTX 680
Hard Disk:	OCZ V2 180GB, 4x HD502HJ, HD204UI, 3TB 7200.14, 250GB 5400.5, 250GB 5400.6
Optical Drive:	TSST SH-S203N
CRT/LCD Model:	Acer P243W
Case:	Cooler Master HAF X
Sound Card:	Creative X-Fi Titanium + Logitech Z506 + Turtle Beach HPA2
PSU:	Silverstone ST1000-P
Software:	Windows 7 Pro x64

Jan 21, 2012, 08:30 PM	#87
radrok Join Date: Oct 2011 Location: Italy Posts: 1,897 (3.30/day) Thanks: 141 Thanked 462 Times in 364 Posts System Specs	It doesn't work for me on 6990s, it says "ASIC quality reading not supported on this card." Same on an ASUS 6970 DirectCU II

Processor:	Ci7 3930K
Motherboard:	RIVE + XSPC Wb
Cooling:	Dual 140x3 HTSF4 + MO-RA3 and TONS of Noctua fans (20+)
Memory:	Corsair Dominator GT 2133
Video Card:	Kryographics SLI Titans ;)
Hard Disk:	2x Corsair Force GT 120GB
Optical Drive:	wut
CRT/LCD Model:	Dell U3011 2560x1600 + Dell 2408WFP 1920x1200
Case:	Dimastech Bench EasyXL
Sound Card:	Xonar Essence STX with AKG K 701
PSU:	Corsair AX1200 (Enermax 1250+ Revo as backup)
Software:	Win7

Processor:	Intel Core i5 3570K
Motherboard:	Asrock Z68 Extreme3 Gen 3
Memory:	2x4GB Corsair Vengeance 1600MHz
Video Card:	MSI GTX 660 TF OC
Hard Disk:	1TB WD Blue
CRT/LCD Model:	Samsung BX1931N
Case:	Corsair Carbide 300R Windowed
Sound Card:	Realtek HD
PSU:	Corsair CX600 80+ Bronze
Software:	Win 7 64-bit

Jan 21, 2012, 08:44 PM	#89
radrok Join Date: Oct 2011 Location: Italy Posts: 1,897 (3.30/day) Thanks: 141 Thanked 462 Times in 364 Posts System Specs	Nope sorry, totally missed it

Jan 21, 2012, 09:31 PM	#90
Freedom4556 Join Date: Dec 2009 Location: AR, USA Posts: 43 (0.03/day) Thanks: 0 Thanked 11 Times in 5 Posts System Specs	I got 97.4% on an EVGA GTX 560 Ti 448 Core FTW Currently running factory overclocked 797/975/1594 @ 1.013 V This seems exceptionally good, am I right? Which would seem to support EVGA doing binning.

System Name:	Uberputer2
Processor:	Intel Core i5-2500K 4.3GHz@1.285V
Motherboard:	MSI Z64MA-ED55
Cooling:	CM Hyper212+
Memory:	2x4GB Mushkin DDR3-1333@9-9-9-24
Video Card:	EVGA GeForce 560 Ti 448 Core @ 827/1654/1950
Hard Disk:	Corsair Force F80A SSD, 3TB Seagate 7200rpm (ST3000DM001-ICH116)
Optical Drive:	LG iHES108 Blu-ray Reader
CRT/LCD Model:	Yamakasi Catleap Q270SE 27" LED 1440p, Dell S2209W 22" 1080p LCD
Case:	Fractal Design Define Mini
PSU:	Antec Earthwatts 650w
Software:	Windows 8 Pro 64bit

System Name:	dusty
Processor:	Core i5 2500k
Motherboard:	MSI P67A-GD65
Cooling:	Corsair H60
Memory:	Corsair ddr3-1600 Vengeance 8GB
Video Card:	Palit gtx 560 ti 448
Hard Disk:	WDC WD2500KS, WD1002FAEX
Optical Drive:	Pioneer dvd-rw
CRT/LCD Model:	Samsung S24A350H
Case:	Cooler Master HAF912 plus
Sound Card:	Creative sound blaster audigy
PSU:	Seasonic X-760W

Jan 21, 2012, 09:50 PM	#92
Disruptor4 Join Date: Jun 2008 Location: Melbourne, Australia Posts: 190 (0.10/day) Thanks: 8 Thanked 20 Times in 16 Posts System Specs	ASIC quality reading is not supported on this card.

System Name:	Uh, my build?
Processor:	Intel Core i7 3770k 3.5GHz (3.9GHz turbo)
Motherboard:	Gigabyte Z77X-UD5H (F8 BIOS)
Cooling:	Coolermaster Hyper 212 Evo
Memory:	G.Skill 8GB DDR3 1600MHz CL9
Video Card:	Gigabyte Radeon HD7970 3GB 1GHz Core/5.5GHz Memory
Hard Disk:	1TB Samsung F1 & 1TB WD Green
Optical Drive:	22x Samsung SH-222BB
CRT/LCD Model:	Samsung 23" Syncmaster P2350
Case:	Coolermaster HAF X
Sound Card:	Onboard now since store didn't RMA properly
PSU:	Corsair HX 850W
Software:	Windows 7 SP1 64bit
Benchmarks:	3DMark 11 - P8456 - http://3dmark.com/3dm11/3372758

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Jan 21, 2012, 10:47 PM	#96
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,352 (2.82/day) Thanks: 3,982 Thanked 2,877 Times in 1,541 Posts System Specs	Curious to see what my two GTX 580's would show: Looks like my second card should oc better than my first one in the SLI setup. Thanks W1zz for this nice little enhancement

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Jan 21, 2012, 10:56 PM	#97
jaredpace Join Date: Sep 2009 Posts: 160 (0.12/day) Thanks: 68 Thanked 65 Times in 30 Posts	wiz any word on AMD 7900 series vrm temperature sensor readings in the next gpuz __________________ “I would like for him to point out and quote specifically the portion of both pics that shows a bart as a 6800 series...” -EastCoasthandle

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TechPowerUp GPU-Z 0.5.7 Released	btarunr	News	24	Dec 27, 2011 09:06 PM
TechPowerUp GPU-Z 0.5.4 Released	btarunr	News	17	Sep 1, 2011 04:55 AM
TechPowerUp GPU-Z 0.5.2 Released	btarunr	News	11	Mar 22, 2011 10:25 AM
TechPowerUp GPU-Z v0.5.0 Released	btarunr	News	7	Dec 30, 2010 04:45 PM
TechPowerUp GPU-Z 0.3.2 Released	btarunr	News	10	Feb 20, 2009 07:15 PM