• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Awesome Llano Overclocking Tool

Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
What RAM do you have? I have a single 4GB stick @1333 9.9.9

Thats as fast as your chip will do, so you're good when to comes to RAM :)
 

Yo_Wattup

New Member
Joined
Jan 26, 2012
Messages
788 (0.18/day)
Location
Brisbane, Australia
System Name Desktop/Gamer/Digital Audio Wokstation ||| HTPC
Processor 2500k @ 4.65ghz ||| AMD A8 @ 3.6ghz
Motherboard ASUS P8Z68-V Pro
Cooling Noctua NH-D14 with single Blue Antec Tri-Cool 120mm ||| Stock
Memory 16GB G.Skill Ripjaws X 1600 @1900mhz 8-9-9-24 ||| 8GB G.Skill 1600 CL9
Video Card(s) 2x HIS HD6950 2GB Crossfire, 6970 clocks ||| HD6550D
Storage 120GB Intel 320 series SSD + 2TB storage ||| 1TB Seagate
Display(s) 32" Sony Bravia LCD 1080p ||| 50" Hitachi Plasma 1080p
Case Raidmax Raptor modded to 7 fans ||| A compact HP Case
Audio Device(s) Firewire audio interface + two 9" studio monitors, 450 REAL watts ||| onboard
Power Supply Corsair TX 750W ||| generic 400W
Software Win 7 Ultimate + Win 8 consumer preview||| Win 7 Pro
Benchmark Scores Never drops below 60fps Battlefield 3 everything on max, fov 90. :D
What RAM do you have? I have a single 4GB stick @1333 9.9.9

See posts #40. :toast:

Your ram should be okay. You'd benefit from 1600mhz ram, but if what Mathragh said is true, then dont worry bout it. :toast:
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
NdMk2o1o - sorry to piss on your chips here, but i think rather tan getting a 100% overclock with no voltage increase i think there could be another far more boring explenation. Could we have some benchies, at least superpi to show that ANYTHING is happening other than cpuz misreporting the speed?

Iv got an e450 x121e on order, and an overclock of any sort would be the icing on the cake, but y'know.. realistically iv seen similar phantom overclocks before
 
Last edited:

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.22/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
NdMk2o1o - sorry to piss on your chips here, but i think rather tan getting a 100% overclock with no voltage increase i think there could be another far more boring explenation. Could we have some benchies, at least superpi to show that ANYTHING is happening other than cpuz misreporting the speed?

Iv got an e450 x121e on order, and an overclock of any sort would be the icing on the cake, but y'know.. realistically iv seen similar phantom overclocks before

it works on these chips, i've got similar clocks. AMD is underclocking them seriously. i've done 1.4 -> 2.8 on my laptop nice and stable, the cooling just couldnt keep up long term.
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
it works on these chips, i've got similar clocks. AMD is underclocking them seriously. i've done 1.4 -> 2.8 on my laptop nice and stable, the cooling just couldnt keep up long term.


No, im serious.

http://www.youtube.com/watch?v=3SRjS1HURjc

It needs to be verified so we know it isn't like this.

Its like this isn't it :( oh well

Example:
E-350 - 1.6GHz
FSB 100MHz
Multiplier 32x
Divider 2
Maximum clock 32/2*100MHz = 1600MHz
Even though you can select a divider smaller than 2 on an E-350, the CPU blocks that and just runs stil at 1.6GHz!

http://code.google.com/p/brazostweaker/wiki/UserguideBrazosTweaker
 
Last edited:

Yo_Wattup

New Member
Joined
Jan 26, 2012
Messages
788 (0.18/day)
Location
Brisbane, Australia
System Name Desktop/Gamer/Digital Audio Wokstation ||| HTPC
Processor 2500k @ 4.65ghz ||| AMD A8 @ 3.6ghz
Motherboard ASUS P8Z68-V Pro
Cooling Noctua NH-D14 with single Blue Antec Tri-Cool 120mm ||| Stock
Memory 16GB G.Skill Ripjaws X 1600 @1900mhz 8-9-9-24 ||| 8GB G.Skill 1600 CL9
Video Card(s) 2x HIS HD6950 2GB Crossfire, 6970 clocks ||| HD6550D
Storage 120GB Intel 320 series SSD + 2TB storage ||| 1TB Seagate
Display(s) 32" Sony Bravia LCD 1080p ||| 50" Hitachi Plasma 1080p
Case Raidmax Raptor modded to 7 fans ||| A compact HP Case
Audio Device(s) Firewire audio interface + two 9" studio monitors, 450 REAL watts ||| onboard
Power Supply Corsair TX 750W ||| generic 400W
Software Win 7 Ultimate + Win 8 consumer preview||| Win 7 Pro
Benchmark Scores Never drops below 60fps Battlefield 3 everything on max, fov 90. :D
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
Well, i can say with certainty that the overclock on llano is working. There's some benchies further up the thread to back that up.
I have no reason to believe the OC on Brazos isn't working. However, I'm still curious about benchies, as no one has both overclocked, and benched brazos in this thread before.
So, just to get this rumour of the OC not working on brazos out of the air, could someone here who has OCed brazos post some benchies of before, and after the OC?

EDIT: indeed it seems the author of the software states that this overclock doesn't work, and that cpu-z reports the frequency wrongly. Makes me even more curious, but doesn't bode well
 
Last edited:

HTC

Joined
Apr 1, 2008
Messages
4,595 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
I tried tinkering with this and did some benches using IBT and it was looking good:



Tinkered some more and was going from this:



To this:



Did some IBT to check for stability and, after passing, updated the service and applied before moving on to the next P-State and then, just after applying P2 it crashed :(
Had to go to safe mode and disable the service to enter windows normally again and tried increasing voltage on that P-State but it still crashed :(

OK: let's start over! Disabled FusionTweaker's service again in safe mode and, after entering normally into windows, updated the service with the default values (those in the 2nd pic). Changed P7 to 6 multi @ 0.725 (that's 0.05 more then before), ran IBT which passed with flying colors and then, after updating and applying, it crashed again ... WTF :confused: it didn't do this with 0.05 volts less before but now it does? WTH :confused:

It's back @ default again and only on power saver scheme :cry:
 
Last edited:
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
Perhaps you should test your settings without making a process for it. If you simply click on "apply" the settings will get saved, but your processor will be at stock again after a reboot, or bluescreen. Apart from that, maybe temps have something to do with your results? Higher temps usually mean a higher voltage is needed.

Don't give up tweaking! There's bound to be some gain to be had with your processor:toast:
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
That youtube dude's ram is likely the bottleneck, we've been over this. :rolleyes: :D

:wtf:

Well, i can say with certainty that the overclock on llano is working. There's some benchies further up the thread to back that up.
I have no reason to believe the OC on Brazos isn't working. However, I'm still curious about benchies, as no one has both overclocked, and benched brazos in this thread before.
So, just to get this rumour of the OC not working on brazos out of the air, could someone here who has OCed brazos post some benchies of before, and after the OC?

EDIT: indeed it seems the author of the software states that this overclock doesn't work, and that cpu-z reports the frequency wrongly. Makes me even more curious, but doesn't bode well


Well ill be able to test it hopefully tomorrow, latest wednesday. I'm pretty sure what is going to happen though.
 

HTC

Joined
Apr 1, 2008
Messages
4,595 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
Perhaps you should test your settings without making a process for it. If you simply click on "apply" the settings will get saved, but your processor will be at stock again after a reboot, or bluescreen. Apart from that, maybe temps have something to do with your results? Higher temps usually mean a higher voltage is needed.

Don't give up tweaking! There's bound to be some gain to be had with your processor:toast:

You may have miss understood me: i tested 1st and, after passing, i updated the service. The thing is, @ 1st it was OK up to P2 and then it crashed. When i tried it again, it didn't even make P7 without crashing (not the IBT: the service update) and that was with 0.05 more volts.
 
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
Oops, I think you may be correct. my bad.
That just leaves heat, or a weird bios bug as a potential explanation. Weird.
Are all the other P-states still working at lower voltage?
also, is there any specific reason you're using the power saver scheme?
 
Last edited:

HTC

Joined
Apr 1, 2008
Messages
4,595 (0.79/day)
Location
Portugal
System Name HTC's System
Processor Ryzen 5 2600X
Motherboard Asrock Taichi X370
Cooling NH-C14, with the AM4 mounting kit
Memory G.Skill Kit 16GB DDR4 F4 - 3200 C16D - 16 GTZB
Video Card(s) Sapphire Nitro+ Radeon RX 480 OC 4 GB
Storage 1 Samsung NVMe 960 EVO 250 GB + 1 3.5" Seagate IronWolf Pro 6TB 7200RPM 256MB SATA III
Display(s) LG 27UD58
Case Fractal Design Define R6 USB-C
Audio Device(s) Onboard
Power Supply Corsair TX 850M 80+ Gold
Mouse Razer Deathadder Elite
Software Ubuntu 19.04 LTS
Oops, I think you may be correct. my bad.
That just leaves heat, or a weird bios bug as a potential explanation. Weird.
Are all the other P-states still working at lower voltage?
also, is there any specific reason you're using the power saver scheme?

I had it @ performance and was using all the P-states @ the same multi and volts except those that were tested and passed.

Example: all P-states @ 6 multi with 0.675 volts and, after it passed IBT, updated service and applied, all P-states except P7 @ 9 multi with 0.7375, and so on, all the way to P2 when it crashed after updating service.

When i tried it again, wasn't even able to set P7 and that was with 0.05 more volts: crashed right after updating service.

Gave up on that figuring some sort of bug and placed it on power saver scheme.
 
Joined
Apr 21, 2010
Messages
5,731 (1.13/day)
Location
West Midlands. UK.
System Name Ryzen Reynolds
Processor Ryzen 1600 - 4.0Ghz 1.415v - SMT disabled
Motherboard mATX Asrock AB350m AM4
Cooling Raijintek Leto Pro
Memory Vulcan T-Force 16GB DDR4 3000 16.18.18 @3200Mhz 14.17.17
Video Card(s) Sapphire Nitro+ 4GB RX 580 - 1450/2000 BIOS mod 8-)
Storage Seagate B'cuda 1TB/Sandisk 128GB SSD
Display(s) Acer ED242QR 75hz Freesync
Case Corsair Carbide Series SPEC-01
Audio Device(s) Onboard
Power Supply Corsair VS 550w
Mouse Zalman ZM-M401R
Keyboard Razor Lycosa
Software Windows 10 x64
Benchmark Scores https://www.3dmark.com/spy/6220813
NdMk2o1o - sorry to piss on your chips here, but i think rather tan getting a 100% overclock with no voltage increase i think there could be another far more boring explenation. Could we have some benchies, at least superpi to show that ANYTHING is happening other than cpuz misreporting the speed?

Trust me its doing something as heat increased substantially aswell due to higher clocks and it felt a lot more responsive not too mention I got an 5fps increase in COD MW1, I did run IBT though only to test for stability not benches, will try and do a 3dmark run and super pi1m of before and after tonight, not doing much else as I don't really have time though that should answer your question :toast:
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
Trust me its doing something as heat increased substantially aswell due to higher clocks and it felt a lot more responsive not too mention I got an 5fps increase in COD MW1, I did run IBT though only to test for stability not benches, will try and do a 3dmark run and super pi1m of before and after tonight, not doing much else as I don't really have time though that should answer your question :toast:

thank you, this is exactly what we need :respect:

people are going to go CRAZY for brazos lappies/netbooks if this pans out.
 
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
I had it @ performance and was using all the P-states @ the same multi and volts except those that were tested and passed.

Example: all P-states @ 6 multi with 0.675 volts and, after it passed IBT, updated service and applied, all P-states except P7 @ 9 multi with 0.7375, and so on, all the way to P2 when it crashed after updating service.

When i tried it again, wasn't even able to set P7 and that was with 0.05 more volts: crashed right after updating service.

Gave up on that figuring some sort of bug and placed it on power saver scheme.

Thats really weird.

The only thing I can suggest then is retry the lowest voltage for every P-state.

I'm not sure whats causing the instability, it could be heat(although I doubt it), it could be a bios issue, or even a motherboard issue(Voltage regulators getting weird at low volts(I dont have a clue)).

thank you, this is exactly what we need :respect:

people are going to go CRAZY for brazos lappies/netbooks if this pans out.

Also remember that NdMk2o1o has a newer Brazos, the E450(clocked at 1,65GHz instead of 1,60GHz). Perhaps this explains why he can overclock, while others have failed before(with a E350)
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
Also remember that NdMk2o1o has a newer Brazos, the E450(clocked at 1,65GHz instead of 1,60GHz). Perhaps this explains why he can overclock, while others have failed before(with a E350)

you never know, it could be as simple as that :)

edit: this could really do with its own thread now, or at least when the results of benchies get dropped. Far too important to be hanging out in a Llano thread. :roll:

edit again: we should be looking at a passmark of:

751 @ 1650 (stock)
1000 @ 2200
1180 @ 2600
1500 @ 3300

... roughly... using known values of the E-300, E-350 and E-450.
 
Last edited:

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
right, x121e E-450 has just arrived, at work though so will have to wait until later - but at least ill get a definite answer at some point today :)

edit: ill also find out if its a red or a black lid - laptop roulette :cool:

edit2: couldn't wait, its red - although a very nice red that photos don't do justice to i have to say.
 
Last edited:

InnocentCriminal

Resident Grammar Amender
Joined
Feb 21, 2005
Messages
6,477 (0.93/day)
System Name BeeR 6
Processor Intel Core i7 3770K*
Motherboard ASUS Maximus V Gene (1155/Z77)
Cooling Corsair H100i
Memory 16GB Samsung Green 1600MHz DDR3**
Video Card(s) 4GB MSI Gaming X RX480
Storage 256GB Samsung 840 Pro SSD
Display(s) 27" Samsung C27F591FDU
Case Fractal Design Arc Mini
Power Supply Corsair HX750W
Software 64bit Microsoft Windows 10 Pro
Benchmark Scores *@ 4.6GHz **@ 2133MHz
I was reading about this over at semi-accurate. Really want to be able to give this a shot on my old man's new Dell M5040.

Great thread btw guys!

:D
 
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
right, x121e E-450 has just arrived, at work though so will have to wait until later - but at least ill get a definite answer at some point today :)

edit: ill also find out if its a red or a black lid - laptop roulette :cool:

edit2: couldn't wait, its red - although a very nice red that photos don't do justice to i have to say.

Awesome man! congratulations!

Red also suits the time of the year :p

Cant wait to hear about the OC-ing results!
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
Awesome man! congratulations!

Red also suits the time of the year :p

Cant wait to hear about the OC-ing results!

Well wait no longer!

As i feared "overclocking" does bugger all :shadedshu

sandra cpu, wprime, super pi, im not bothering with anything else until NdMk2o1o comes back with some numbers that suggest it works :confused: then we can figure out if there is an undocumented step or something.
 
Last edited:

Yo_Wattup

New Member
Joined
Jan 26, 2012
Messages
788 (0.18/day)
Location
Brisbane, Australia
System Name Desktop/Gamer/Digital Audio Wokstation ||| HTPC
Processor 2500k @ 4.65ghz ||| AMD A8 @ 3.6ghz
Motherboard ASUS P8Z68-V Pro
Cooling Noctua NH-D14 with single Blue Antec Tri-Cool 120mm ||| Stock
Memory 16GB G.Skill Ripjaws X 1600 @1900mhz 8-9-9-24 ||| 8GB G.Skill 1600 CL9
Video Card(s) 2x HIS HD6950 2GB Crossfire, 6970 clocks ||| HD6550D
Storage 120GB Intel 320 series SSD + 2TB storage ||| 1TB Seagate
Display(s) 32" Sony Bravia LCD 1080p ||| 50" Hitachi Plasma 1080p
Case Raidmax Raptor modded to 7 fans ||| A compact HP Case
Audio Device(s) Firewire audio interface + two 9" studio monitors, 450 REAL watts ||| onboard
Power Supply Corsair TX 750W ||| generic 400W
Software Win 7 Ultimate + Win 8 consumer preview||| Win 7 Pro
Benchmark Scores Never drops below 60fps Battlefield 3 everything on max, fov 90. :D
Well wait no longer!

As i feared "overclocking" does bugger all :shadedshu

sandra cpu, wprime, super pi, im not bothering with anything else until NdMk2o1o comes back with some numbers that suggest it works :confused: then we can figure out if there is an undocumented step or something.

Try OCing your ram. :)
 
Joined
Dec 3, 2009
Messages
1,298 (0.25/day)
Location
The Netherlands
System Name PC || Acer Nitro 5
Processor Ryzen 9 5900x || R5 2500U @ 35W
Motherboard MAG B550M MORTAR WIFI || default
Cooling 1x Corsair XR5 360mm Rad||
Memory 2x16GB HyperX 3600 @ 3800 || 2x8GB DDR4 @ 2400MTs
Video Card(s) MSI RTX 2080Ti Sea Hawk EK X || RX 560X
Storage Samsung 9801TB x2 + Striped Tiered Storage Space (2x 128Gb SSD + 2x 1TB HDD) || 128GB + 1TB SSD
Display(s) Iiyama PL2770QS + Samsung U28E590, || 15,6" 1080P IPS @ 100Hz Freesync enabled
Case SilverStone Alta G1M ||
Audio Device(s) Asus Xonar DX
Power Supply Cooler Master V850 SFX || 135Watt 19V OEM adaptor
Mouse ROG Pugio II
Software Win 11 64bit || Win 11 64bit
Try OCing your ram. :)

Unless his bios has a specific option for overclocking the RAM, i doubt its possible.

Also, he should atleast see SOME increase when overclocking, if only in temperature, or benchmarks that fit in the L2 cache(prime95 can do that i think)
 

MadduckUK

New Member
Joined
Feb 12, 2012
Messages
11 (0.00/day)
Unless his bios has a specific option for overclocking the RAM, i doubt its possible.

there is no ram adjustment of any sort, Yo_Wattup is most probably well aware of this. is it some sort of forum in-joke?
 
Top