Your PC ATM - Page 781

MGF Derp · Feb 7, 2012, 01:02 AM

Hey I got a case....for now.

ThE_MaD_ShOt · Feb 7, 2012, 01:06 AM

Hey Derp what case is that?

JrRacinFan · Feb 7, 2012, 01:09 AM

That's a haf912. Got my matching 460 today!!! YAY!

MGF Derp · Feb 7, 2012, 01:22 AM

Quote:

Originally Posted by JrRacinFan

That's a haf912. Got my matching 460 today!!! YAY!

Correct its a HAF 912. Not a bad case, wish it had a black interior though. And congrats on the 460 SLi action.

t_ski · Feb 7, 2012, 02:24 AM

Quote:

Originally Posted by ThE_MaD_ShOt

You be correct. That is one fast ass athlon xp-m, 4410 mhz blazing. It should be 200 x 11 not 400 x 11. And check out that dual channel setup. I have both of the Nforce 2 boards I have running setup that way and running in dual channel. 1x 1gb and 2 x 512 mb.

You probably need an older version of the software to read it right.

ThE_MaD_ShOt · Feb 7, 2012, 02:38 AM

Quote:

Originally Posted by t_ski

You probably need an older version of the software to read it right.

That's what I was thing also.

phill · Feb 7, 2012, 07:15 PM

Quote:

Originally Posted by Norton

@Phill- don't let it get you too frustrated. Take a step back and take a little break... mistakes get made when your stressed, tired, and pressed for time. A new perspective is always gained with a fresh look

I spent many years wrenching cars and found this approach to be the most effective at preserving the equipment I'm working on/with as well as preserving my sanity

Well I really do hope that it works, but at the moment, its really not doing anything at all and that's really not what I was hoping for!!

I have tried different CPU, ram, GPU. I've taken the battery out, I've reset the CMOS, I've reseated the CPU block and tried both sets of ram, one dimm after another and still no change in the rig

It just wont post for love nor money!!

Quote:

Originally Posted by t_ski

You probably need an older version of the software to read it right.

If you look on the other page, mine worked fine with the latest release of CPU-Z

The only thing I can see that is different, is that you have more ram and I thought that the NF7-S was only able to read or use 1.5Gb of ram??

phill · Feb 7, 2012, 07:25 PM

Quote:

Originally Posted by ThE_MaD_ShOt

That's what I was thing also.

I think it might be the amount of ram you've got. I don't see any other difference in the rigs, these are the CPU-Z Validator shots I had from my old Socket A rigs yesterday:

http://valid.canardpc.com/show_oc.php?id=2235438

http://valid.canardpc.com/show_oc.php?id=2235831

http://valid.canardpc.com/show_oc.php?id=2235862

Have you tried taking a dimm out??

ThE_MaD_ShOt · Feb 7, 2012, 09:12 PM

All three you have are screwed liked mine. See how they are rejected. Look at the fsb and the rated fsb. Also look on the left beside freq. It shows your actual speed which is right but beside that it shows the fsb and multi. IF you multiply them together you would get twice the speed the proc is running. The fsb needs to show half what cpu-z is reporting. Like in my case it should be 200 not 400. Now I ran it on my A7n8x system, which has the same amount of mem, Same cpu speed and same chipset. Only difference is the Asus system is running an actual xp 3200+ where the Nf7-2 system is running a xp-m oced to xp3200+ speeds. The overclock may have something to do with it. Here's a screenshot of the A7n8x system. Notice the fsb speeds.

phill · Feb 7, 2012, 10:45 PM

I do apologise, I thought that they where successfull!! Liars!!

Well I'll keep an eye out for it when I submit anything again... I thought it was just fine??

Oh well, I hope to get a few more validated as I've just managed to get my 762 board running and as its nearly midnight, I think I should get to bed as I've gotta be up for a 15 hour day tomorrow and a 12 hour shift during that... ugh.... Something to look forward to when I get home at least

I'll try and post up a few pics tomorrow night if I can

ThE_MaD_ShOt · Feb 7, 2012, 11:34 PM

Now The last one I posted was successful. Now where the procs you where testing ided in the bios for what they where? I know on my nf7-s system the bios ided the proc as unkown @ 2.2 ghz and my A7n8x system has a actual xp 3200 so it was able to id the chip. That must be what is throwing cpu-z off.

BabySky · Feb 8, 2012, 08:55 AM

Here's my rig

MGF Derp · Feb 8, 2012, 11:11 AM

Oo skeleton, very nice

THE_EGG · Feb 8, 2012, 11:31 AM

Quote:

Originally Posted by BabySky

Here's my rig

http://i260.photobucket.com/albums/i...r/IMG_0177.jpg

http://i260.photobucket.com/albums/i...y_jr/cpuz2.jpg

http://valid.canardpc.com/cache/banner/2238440.png

I must say I do like the skeleton, although, I would NOT like the dust

specks · Feb 8, 2012, 12:12 PM

That skeleton is very nice. I like it. Compressed air should take care of the dust.

But why underclock?

Laurijan · Feb 8, 2012, 12:34 PM

Quote:

Originally Posted by specks

That skeleton is very nice. I like it. Compressed air should take care of the dust.

But why underclock?

Seems he has Intel SpeedStep enabled which throttles down the CPU when full power is not needed.

JrRacinFan · Feb 8, 2012, 01:20 PM

Why not keep it enabled? No sense of turning it off on a Sandy Bridge system as you overclock through Turbo anyways. Also some boards if you disable power saving it won't overclock anyways, really doubt thats the case on his UD5 though.

phill · Feb 8, 2012, 09:58 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Now The last one I posted was successful. Now where the procs you where testing ided in the bios for what they where? I know on my nf7-s system the bios ided the proc as unkown @ 2.2 ghz and my A7n8x system has a actual xp 3200 so it was able to id the chip. That must be what is throwing cpu-z off.

I have three CPU's..

XP 2500
XP 2600
XP 2800

I thought they worked but I was wrong...

GC_PaNzerFIN · Feb 9, 2012, 02:28 PM

Got more power today. Corsair sure has amazing warranty and they ship you replacement first if you ask kindly. AX750 started coil whining like nuts after a year quiet use and Corsair granted RMA.

Crossing fingers that the replacement doesn't squeal like a mouse out of the box

LifeOnMars · Feb 9, 2012, 02:45 PM

BabySky, it also looks like you may be running your RAM in single channel unless it's being reported wrongly.

Laurijan · Feb 10, 2012, 05:39 PM

Go my new Samsung 40" LCD TV today

Here it is with old 24" LCD monitor as comparison

TacoTown · Feb 10, 2012, 05:40 PM

Quote:

Originally Posted by Laurijan

Go my new Samsung 40" LCD TV today

http://img.techpowerup.org/120210/IMG_0565.jpg
http://img.techpowerup.org/120210/IMG_0567212.jpg

Here it is with old 24" LCD monitor as comparison
http://img.techpowerup.org/120210/IMG_0569.jpg

TRWOV · Feb 11, 2012, 01:43 AM

Thanks Paulieg

catnipkiller · Feb 11, 2012, 02:30 AM

ITS ALIVE!!!!!

ThE_MaD_ShOt · Feb 11, 2012, 02:34 AM

swwweett!

System Name:	Derpatron MKV/Murder Bench
Processor:	i7 3820/ i7 950 or Xeon E3503
Motherboard:	AsRock X79 Extreme 6/ EVGA X58 Sli Classified
Cooling:	Antec Kuhler 620
Memory:	GSkill Ares 16Gb (4x4Gb) 2133/GSkill Ripjaw 6Gb (3x2Gb) 2000
Video Card:	EVGA GTX 580/EVGA GTX 480(Sli)/MSI Radeon 4830
Hard Disk:	WD Cavier Black 640Gb
Optical Drive:	In the 90's maybe
Case:	Antec P280/Lian Li Pit Stop T60B
PSU:	Xigmatek NRP MC-1002 1000W
Software:	Win 32/Vista 32/Win 64

Feb 7, 2012, 01:06 AM	#19502
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,754 (6.91/day) Thanks: 2,547 Thanked 2,451 Times in 1,475 Posts System Specs	Hey Derp what case is that? __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Feb 7, 2012, 01:09 AM	#19503
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.13/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	That's a haf912. Got my matching 460 today!!! YAY! __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Feb 7, 2012, 01:02 AM	#19501
MGF Derp Join Date: Oct 2011 Location: Michigan Tech Posts: 146 (0.25/day) Thanks: 9 Thanked 54 Times in 25 Posts System Specs	Hey I got a case....for now.

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

System Name:	Complete and Total Overkill
Processor:	920 D0 @ 4.65Ghz @ 1.45vcore
Motherboard:	EVGA Classified 762
Cooling:	3 Custom water cooling loops in each rig
Memory:	G Skill Patriot 2133Mhz
Video Card:	3 x 3Gb EVGA GTX580's @ 772/1002/1544
Hard Disk:	8 x Seagate Cheetah 15k.5 73Gb 15k SAS Drives
Optical Drive:	Pioneer DVD-RW
CRT/LCD Model:	3 x 30" Dell 3011WFP
Case:	Custom Made Danger Den Tower 21
Sound Card:	No room :(
PSU:	Corsair AX1200W - I think I need more power!!
Software:	Windows 7 Ultimate 64bit
Benchmarks:	Just gaming now!! What benchmarks would you like??

Feb 7, 2012, 09:12 PM	#19509
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,754 (6.91/day) Thanks: 2,547 Thanked 2,451 Times in 1,475 Posts System Specs	All three you have are screwed liked mine. See how they are rejected. Look at the fsb and the rated fsb. Also look on the left beside freq. It shows your actual speed which is right but beside that it shows the fsb and multi. IF you multiply them together you would get twice the speed the proc is running. The fsb needs to show half what cpu-z is reporting. Like in my case it should be 200 not 400. Now I ran it on my A7n8x system, which has the same amount of mem, Same cpu speed and same chipset. Only difference is the Asus system is running an actual xp 3200+ where the Nf7-2 system is running a xp-m oced to xp3200+ speeds. The overclock may have something to do with it. Here's a screenshot of the A7n8x system. Notice the fsb speeds. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Feb 7, 2012, 10:45 PM	#19510
phill Join Date: Jun 2011 Location: Bridgwater, Somerset Posts: 291 (0.41/day) Thanks: 595 Thanked 187 Times in 96 Posts System Specs	I do apologise, I thought that they where successfull!! Liars!! Well I'll keep an eye out for it when I submit anything again... I thought it was just fine?? Oh well, I hope to get a few more validated as I've just managed to get my 762 board running and as its nearly midnight, I think I should get to bed as I've gotta be up for a 15 hour day tomorrow and a 12 hour shift during that... ugh.... Something to look forward to when I get home at least I'll try and post up a few pics tomorrow night if I can

Feb 7, 2012, 11:34 PM	#19511
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,754 (6.91/day) Thanks: 2,547 Thanked 2,451 Times in 1,475 Posts System Specs	Now The last one I posted was successful. Now where the procs you where testing ided in the bios for what they where? I know on my nf7-s system the bios ided the proc as unkown @ 2.2 ghz and my A7n8x system has a actual xp 3200 so it was able to id the chip. That must be what is throwing cpu-z off. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Feb 8, 2012, 08:55 AM	#19512
BabySky Join Date: Feb 2012 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Here's my rig Last edited by BabySky; Feb 8, 2012 at 09:42 AM.

Feb 8, 2012, 11:11 AM	#19513
MGF Derp Join Date: Oct 2011 Location: Michigan Tech Posts: 146 (0.25/day) Thanks: 9 Thanked 54 Times in 25 Posts System Specs	Oo skeleton, very nice

System Name:	Big Black Box \| The Orange Box
Processor:	Intel i5-2500k @ 4.8ghz (48x100) \| Intel i5-3570k @ 4.2ghz (42x100)
Motherboard:	Gigabyte G1.Sniper3 \| Asus P8Z77-I Deluxe
Cooling:	Antec Kuhler H20 620 Push-Pull (1X NF-P12 & stock fan) \| Antec Kuhler H20 620 Push-Pull (1X NF-P12 &
Memory:	G.Skill Ripjaws X 2X4GB 2133mhz 9-10-9-24 \| G.Skill Ripjaws X 2X4GB 2133mhz 9-10-9-24
Video Card:	Gigabyte GTX 570 OC @ 850/1700/2100 \| Gigabyte GTX 580 SOC @ 925/1810/2280 @1.125V
Hard Disk:	OCZ Agility 4 128gb, 3X WD RE4 24/7 2TB RAID 5 \| 1X OCZ Vertex 4 128GB & 2X WD 500GB Scorpio Black
Optical Drive:	Samsung BD reader combo \| USB external
CRT/LCD Model:	AOC i2757fh & BenQ FP241W (ANCIENT!) \| LG IPS235V
Case:	Silverstone Fortress FT02-B (no window) \| Bitfenix Prodigy 'atomic orange' limited edition
Sound Card:	Asus Essence ST -Denon Receiver -5.1 B&W CMC/DM601's/DM600's also a pair of B&W P5's \| ASUS Xonar U1
PSU:	Zalman ZM-1000HP \| Corsair TX-750v2
Software:	Windows 7 Ultimate 64-bit \| Windows 7 Ultimate 64-bit
Benchmarks:	Citroen DS3 THP155 DSport 6-speed manual

Feb 8, 2012, 12:12 PM	#19515
specks Join Date: Feb 2011 Posts: 422 (0.52/day) Thanks: 424 Thanked 87 Times in 59 Posts System Specs	That skeleton is very nice. I like it. Compressed air should take care of the dust. But why underclock?

System Name:	Spreadsheet powerhouse
Processor:	Two P4s glued together
Motherboard:	Asus P5KPL-AM EPU
Cooling:	CoolerMaster Hyper TX3
Memory:	2gb (2x1gb) Kingston Value Ram DDR2 800mhz
Video Card:	Sapphire HD4670 1gb GDDR3 w/ Arctic Cooling Accelero L7
Hard Disk:	500GB Western Digital Caviar Blue
Optical Drive:	Samsung Super WriteMaster
CRT/LCD Model:	Philips 191EL 18.5"
Case:	Thermaltake V4 Black Edition
Sound Card:	Onboard
PSU:	Thermaltake TR2 600W
Software:	WinXp

System Name:	Enslaver :)
Processor:	Intel i5 3570K Ivy Bridge
Motherboard:	ASRock Z77 Extreme4
Cooling:	CPU: Noctua NH-D14, Case: 4x12cm Noctua
Memory:	8GB DDR3 Samsung 30nm MV-3V4G3
Video Card:	ASUS GTX560Ti DirectCUII TOP 1GB
Hard Disk:	OCZ Agility 3 120GB SSD for OS, Seagte internal 500GB Download-cache, Seagate external 2TB for Media
Optical Drive:	Samsung DVD-RW/RAM, LG DVD-RW/RAM
CRT/LCD Model:	Samsung UE40D6200 Full-HD 3D LED LCD TV
Case:	Antec P182, Gunmetal Black Edition
Sound Card:	Razer Barracuda AC-1 soundcard, Logitech Z-5450 5.1 speakers
PSU:	Termaltake Thoughpower 750W, Cable management
Software:	Windows 7 Ultimate SP1 x64

Feb 8, 2012, 01:20 PM	#19517
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.13/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Why not keep it enabled? No sense of turning it off on a Sandy Bridge system as you overclock through Turbo anyways. Also some boards if you disable power saving it won't overclock anyways, really doubt thats the case on his UD5 though. __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

Feb 9, 2012, 02:28 PM	#19519
GC_PaNzerFIN Join Date: Oct 2009 Location: Finland Posts: 378 (0.29/day) Thanks: 22 Thanked 203 Times in 82 Posts System Specs	Got more power today. Corsair sure has amazing warranty and they ship you replacement first if you ask kindly. AX750 started coil whining like nuts after a year quiet use and Corsair granted RMA. Crossing fingers that the replacement doesn't squeal like a mouse out of the box __________________ WE REQUIRE MORE HARDWARE

System Name:	I dunno lol
Processor:	Intel Core i7 3930K
Motherboard:	Asus Rampage IV Formula X79
Cooling:	Noctua NH-D14 SE2011
Memory:	4x4GB Corsair Vengeance LP 1.35V
Video Card:	Zotac GTX 480 AMP!
Hard Disk:	2x 256GB Samsumg 840 Pro SSD + 3TB WD RED HDD
Optical Drive:	-
CRT/LCD Model:	Samsung S23A700D @120Hz
Case:	Corsair Obsidian 800D
Sound Card:	ASUS Xonar DX + Sennheiser HD 598
PSU:	Corsair AX750W
Software:	Windows 8 Professional 64bit

Feb 9, 2012, 02:45 PM	#19520
LifeOnMars Join Date: Jun 2008 Location: Kettering,Northants. UK Posts: 2,242 (1.25/day) Thanks: 1,718 Thanked 401 Times in 337 Posts System Specs	BabySky, it also looks like you may be running your RAM in single channel unless it's being reported wrongly.

Feb 10, 2012, 05:39 PM	#19521
Laurijan Join Date: Feb 2007 Location: Oulu, Finland Posts: 1,935 (0.84/day) Thanks: 270 Thanked 352 Times in 282 Posts System Specs	Go my new Samsung 40" LCD TV today Here it is with old 24" LCD monitor as comparison __________________ If you want to quit smoking tobacco this is a must see: ☆☆☆The Electronic-Cigarette Club☆☆☆ @ GN.net Laurijan´s Heat My worldwide sales thread

System Name:	Sexy Vanilla Freshness / The Sister / The I don't know what to do with it
Processor:	Core i5 3570K @4.5ghz 1.25V/ Phenom II 925 @ 3.6ghz 1.2V / Phenom II 955
Motherboard:	ASUS P8Z77-V / Asrock A770De+ / M4A785-M
Cooling:	Coolit ECO A.C.L / Corsair H40 / stock
Memory:	M379B5273DH0-YK0 2X4GB sticks/ 8 gigs 667 / 6 gigs 667
Video Card:	Sapphire HD 6870 / XFX 5770 XXX edition / OEM 4670
Hard Disk:	Toshiba MK5065GSX+ST375052+WD10EZEX / 1x WD1500 Black / Seagate 160 gig
Optical Drive:	None / LG supermulti drive
CRT/LCD Model:	Acer S200HL+Acer P206HV / LG 22LD350 / N/A
Case:	HAF X 912 / NZXT Trinity / N/A
Sound Card:	Onboard / Onboard
PSU:	Seasonic 750X / ROSEWILL RG630-S12 630W RT / Bestec 400
Software:	Windows 7 Home Premium 64 bit / Windows 7 Ultimate / MacOS
Benchmarks:	Once I saw a turtle with a taco on it's back, I hope hes still out there. Rock on Taco turtle, rock

Feb 11, 2012, 01:43 AM	#19523
TRWOV Join Date: Aug 2011 Location: Mexico Posts: 2,064 (3.16/day) Thanks: 797 Thanked 1,071 Times in 556 Posts System Specs	Thanks Paulieg Attached Thumbnails __________________ My other rigs: OCTANUX - Conroe865PE - QX6800 - 4GB OCZ Platinum EL - HIS HD4670 AGP - SB Audigy 2 ZS - BFG PPU phenomenal - AM2NF3-VSTA - 965BE - 8GB OCZ Platinum LV - HIS HD3850 AGP - SB X-Fi - Asus PPU - WIP Green Tea - 939A8X-M - FX60 - 4GB OCZ Platinum EL - 7950GT AGP Re-build - CT-6VTA2 - PIII 600E - 384MB PC133 - Voodoo 5500 AGP - SB16 ISA BLUELINE - H61M-GE - PDC G645 - 8GB DDR3-1333 - Powercolor HD7750 - 2xTV Wonder 650

System Name:	Sandy Bridged 3rd Take
Processor:	Core i5-2320 @ 3.5Ghz
Motherboard:	GYGABYTE GA-Z77X-UD3H
Cooling:	Antec Kuhler H2O 620
Memory:	2x4GB A-DATA XPG 1600GS
Video Card:	ATi RADEON HD7870 2GB / Zotac GT430
Hard Disk:	500GB WD / 64GB Samsung SSD (SRT cache) / 2TB Seagate
Optical Drive:	Samsung SH-B123A Blu-ray/DVD-RW
CRT/LCD Model:	Acer V223W 22" LCD 1680x1050
Case:	Cooler Master Gladiator 600
PSU:	Cooler Master Silent Pro M 700w
Software:	Windows 8 Pro with Media Center
Benchmarks:	3dmark11 7925, IBT 90Gflops

Feb 11, 2012, 02:30 AM	#19524
catnipkiller Join Date: Apr 2010 Location: canada Posts: 1,059 (0.93/day) Thanks: 340 Thanked 474 Times in 326 Posts System Specs	ITS ALIVE!!!!! __________________ MyHeatWare My FS/FT

System Name:	INTEL/AMD
Processor:	I7 920@3.8GHZ / 1100T@3.8GHZ(on air)
Motherboard:	ASROCK Extream x58 / GIGABYTE GA-990FXA-UD3
Cooling:	Rasa 450 RS120 with dcc pump / zalmen 9900 cooler
Memory:	2x4 gb 1600 / 4x4gb 1600
Video Card:	XFX 7950 DD / XFX 5750
Hard Disk:	2xcorsair ssd 120gb raid0 /2x adata ssd 120gb
Optical Drive:	lg
CRT/LCD Model:	50 inch plasma / 22inch acer
Case:	Bitfenix Merc Beta / Anteck 900 moded
Sound Card:	ASUS xomar DGX
PSU:	Enermax 800EWT / 750 zalman
Software:	win 7 64bit untimate pro edtion ftw

Feb 11, 2012, 02:34 AM	#19525
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,754 (6.91/day) Thanks: 2,547 Thanked 2,451 Times in 1,475 Posts System Specs	swwweett! __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Currently Active Users Viewing This Thread: 7 (0 members and 7 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the best ATi Graphics card atm?	kebabs	AMD / ATI	10	Dec 23, 2008 12:59 PM
Jericho: anyone playing this atm?	HookeyStreet	Games	6	Oct 27, 2007 11:37 PM
[FS \| FT \| WTB] : PC Hardware - Wireless K&M + USB Media Card Readers + Various Stuff	Sovereign	Buy/Sell/Trade/Giveaway Forum	11	Mar 5, 2007 01:24 AM