The AMD Phenom II OC'ers Club - Page 567

JrRacinFan · Feb 29, 2012, 02:52 PM

Start by dropping ram one divider under what its rated, bringing nb/ht link multi down one. Set vcore to say 1.3v nb vid to say 1.2v. Disable spread spectrums and c1e/cnq. Start pushing bclk/fsb up. While checking temps start off by running prime95. If you can go at least an hour, then run linpack max ram available for an hour. Rinse and repeat for every 100mhz.

Irony · Feb 29, 2012, 02:53 PM

Quote:

Originally Posted by Velvet Wafer

Water all the way long... anything less is for beginners!

Nah, do what floats the Boat, im just joking!

I wont trade my loop for any crappy aircooler thats made, tho.
Who else can run 4.2ghz 1.44, 3130NB 1.3125v on passive?

I need just a touch more cpu volts, other than that I can run that. and never go over 41c

brandonwh64 · Feb 29, 2012, 02:54 PM

Quote:

Originally Posted by JrRacinFan

Start by dropping ram one divider under what its rated, bringing nb/ht link multi down one. Set vcore to say 1.3v nb vid to say 1.2v. Disable spread spectrums and c1e/cnq. Start pushing bclk/fsb up. While checking temps start off by running prime95. If you can go at least an hour, then run linpack max ram available for an hour. Rinse and repeat for every 100mhz.

Thanks Jr, I will be testing as soon as I get free time. I have army reserve duty this weekend so monday or so I will be able to get things rolling

JrRacinFan · Feb 29, 2012, 03:09 PM

Correction, that's every 100mhz on BOTH nb and cores.

EDIT
Also my post is rather universal to all am3 based chips if not looking for stupid highoverclocks, right down to volts used.

Velvet Wafer · Mar 1, 2012, 02:09 AM

Quote:

Originally Posted by Irony

I need just a touch more cpu volts, other than that I can run that. and never go over 41c

Pretty good Results! (Screens? With Linx? Sensor tabs?)
But, you also need to have to use that hanging brick in your case...
Im not formidable with heavy air coolers, a nice comfortable WB is something that cant be beaten

Irony · Mar 2, 2012, 07:44 PM

Quote:

Originally Posted by Velvet Wafer

Pretty good Results! (Screens? With Linx? Sensor tabs?)
But, you also need to have to use that hanging brick in your case...
Im not formidable with heavy air coolers, a nice comfortable WB is something that cant be beaten

Here's a screenie. NB is at 3000 with 1.28v, CPU at 4.2 with 1.52 in bios. Ran linx for about 3 hours yesterday with no problems. RAM is only at 1600, had it at 1840 for a while but it wasn't perfectly stable.

My cooler weighs almost 3 pounds, lol. I would really like to try water.

Velvet Wafer · Mar 2, 2012, 09:34 PM

Quote:

Originally Posted by Irony

Here's a screenie. NB is at 3000 with 1.28v, CPU at 4.2 with 1.52 in bios. Ran linx for about 3 hours yesterday with no problems. RAM is only at 1600, had it at 1840 for a while but it wasn't perfectly stable.
http://i.imgur.com/GBAHe.png

My cooler weighs almost 3 pounds, lol. I would really like to try water.

Not bad at all, just need some lower timings on that ram!

Yeah, Water is great once everything is set up properly,in my opinion, air cooling is by far not as good as water, as long as your loop is leakfree and conveniently built

Irony · Mar 3, 2012, 12:49 AM

I think they are 9-9-9-24 stock. they won't run at 7 though.

Edit: I plan on getting a second gen bulldozer, it should get toasty, as far as air is concerned. I'm thinking I might try water then. I don't want a kit, like corsair or antec, I kinda want to build it.

Corduroy_Jr · Mar 4, 2012, 12:06 AM

not to brag but its crazy must of you with your 6 core tubans are having a hard time getting anything stable over 4.2/4.3ghz. where as my phenom II 965 can get into windows at 4.8ghz, and of course i know its not stable but i am making a point hear

eidairaman1 · Mar 4, 2012, 12:15 AM

Quote:

Originally Posted by Corduroy_Jr

not to brag but its crazy must of you with your 6 core tubans are having a hard time getting anything stable over 4.2/4.3ghz. where as my phenom II 965 can get into windows at 4.8ghz, and of course i know its not stable but i am making a point hear

A stable CPU is far more important than a suicide pass

Corduroy_Jr · Mar 4, 2012, 12:32 AM

maybe so but being able to get into windows without a bosd at those clocks is impressive. as for a stable i ran prime for 3 at 4.5ghz

Velvet Wafer · Mar 4, 2012, 12:47 AM

with a different board, clocking wouldnt be so good for you i guess, its the best board i personally ever used for phenom clocking

also, if you can boot at 4.8, youre just lucky... pretty good chip

Corduroy_Jr · Mar 4, 2012, 01:19 AM

yea well live in the Canada, so i had the doors open that day lmo

Velvet Wafer · Mar 4, 2012, 01:20 AM

Quote:

Originally Posted by Corduroy_Jr

yea well live in the Canada, so i had the doors open that day lmo

well, then you have just answered your question yourself, why you are able to clock like that

de.das.dude · Mar 11, 2012, 10:17 AM

http://www.erodov.com/forums/amd-oci...d/50182-2.html

lulz.

PHaS3 · Mar 11, 2012, 12:42 PM

Quote:

Originally Posted by de.das.dude

http://www.erodov.com/forums/amd-oci...d/50182-2.html

lulz.

Now that is pure gold... HAHAHA

My favourite part?

2. NB or northbrige - It doesn't only govern the performance of Ram. Totally wrong. NB has nothing to with RAM- all latest CPU has IMC integrated memory controller that decides the frequency, latency and performance of the ram. NB caters to display devices / pcie devices.

What a champion....

cadaveca · Mar 11, 2012, 04:13 PM

I love TPU...and that you guys have a clue....that was....wow. Lovely way to start my Sunday!

Quote:

2. Always be hydrated

Heh.

Irony · Mar 11, 2012, 10:23 PM

Wow....

Willful ignorance is one of my pet peeves. And when ignorance speaks with a voice of authority.

xBruce88x · Mar 11, 2012, 11:24 PM

oh god... this reminds me of when my local computer tech tried to tell me a GPU has nothing to do with Bluray playback and that only a motherboard with an on-board HDMI port could do so. I tried explaining that it has an on-board GPU but he refused to acknowledge such a fact. This all started when I asked him if he had any blu-ray drives for sale. He tried to ask what motherboard i had (even though i bought it from him) but told him i have an 9600GT and should be fine. He refused to sell me one since he thought i'd bring it back when "i found out my motherboard doesn't support bluray"

de.das.dude · Mar 12, 2012, 06:31 AM

lulz. cant believe he is a friend of my cousin.
that was written by me

and he is the senor moderator at a forum. i left that forum after spamming everywhere

PHaS3 · Mar 12, 2012, 06:42 AM

Quote:

Originally Posted by de.das.dude

i left that forum after spamming everywhere

Good form, well played

WojtasRed · Mar 23, 2012, 03:18 PM

How can I unlock 4th core in my 720?

JrRacinFan · Mar 23, 2012, 03:22 PM

Quote:

Originally Posted by WojtasRed

How can I unlock 4th core in my 720?

Here's a video of me unlocking the 555 Black on a 790X-UD4P
http://youtu.be/Sp74dBeVs58

A very similar bios layout to what you have.

Athlonite · Mar 23, 2012, 04:09 PM

ROFL mobo doesn't support Blue ray I hope your not planning on using him anymore what a moron

JrRacinFan · Mar 23, 2012, 04:27 PM

Quote:

Originally Posted by Athlonite

ROFL mobo doesn't support Blue ray I hope your not planning on using him anymore what a moron

What? Come again?

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

System Name:	Ironic
Processor:	AMD FX8350 4.5ghz 1.32v (stock volts)
Motherboard:	Asrock Fatal1ty 990FX
Cooling:	Swiftech Maelstrom/MCP35X, EK Supremacy, XT45 360mm rad
Memory:	8Gb Gskill Ripjaws X DDR3 1600
Video Card:	GIGABYTE GTX 670 2gb Windforce OC edition OC'ed
Hard Disk:	Hitachi 1tb HDD; 60gb OCZ SATA III ssd
Optical Drive:	LG Bluray drive
CRT/LCD Model:	Achieva Shimian 27" 2560x1440
Case:	Cooler Master HAF 932 lots of fans
Sound Card:	Integrated
PSU:	Cooler Master 1000 Platinum
Software:	Windows 7 Ultimate 64-Bit; Ubuntu
Benchmarks:	p10001 3dmark11

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Feb 29, 2012, 03:09 PM	#14154
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.13/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Correction, that's every 100mhz on BOTH nb and cores. EDIT Also my post is rather universal to all am3 based chips if not looking for stupid highoverclocks, right down to volts used. __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited Last edited by JrRacinFan; Feb 29, 2012 at 03:19 PM.

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Feb 29, 2012, 02:52 PM	#14151
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.13/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Start by dropping ram one divider under what its rated, bringing nb/ht link multi down one. Set vcore to say 1.3v nb vid to say 1.2v. Disable spread spectrums and c1e/cnq. Start pushing bclk/fsb up. While checking temps start off by running prime95. If you can go at least an hour, then run linpack max ram available for an hour. Rinse and repeat for every 100mhz.

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Mar 3, 2012, 12:49 AM	#14158
Irony Join Date: Sep 2011 Location: COC WhiterunOrigin Posts: 986 (1.62/day) Thanks: 372 Thanked 243 Times in 197 Posts System Specs	I think they are 9-9-9-24 stock. they won't run at 7 though. Edit: I plan on getting a second gen bulldozer, it should get toasty, as far as air is concerned. I'm thinking I might try water then. I don't want a kit, like corsair or antec, I kinda want to build it. __________________ My Heatware When life gives you lemons, burn Life's house down. Last edited by Irony; Mar 3, 2012 at 02:19 AM.

Mar 4, 2012, 12:06 AM	#14159
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	not to brag but its crazy must of you with your 6 core tubans are having a hard time getting anything stable over 4.2/4.3ghz. where as my phenom II 965 can get into windows at 4.8ghz, and of course i know its not stable but i am making a point hear

Processor:	Phenom II 965
Motherboard:	Biostar TA870+
Cooling:	Zalman CNPS10X Performa
Memory:	Kingston hyperx 1600mhz 2x8gb
Video Card:	ASUS Radeon HD 6870 DirectCU II 990/1250 stock volts
Hard Disk:	Seagate 500gb, Wd 1tb black
Optical Drive:	Sony optiarc dvd-rw
CRT/LCD Model:	SAMSUNG 2433BW 24
Case:	Thermaltake v3 black edition
Sound Card:	onboard, Logitech x540
PSU:	Antec true power modular 650 watt
Software:	Windows 7 x64 ultimate

System Name:	BS03/04
Processor:	AMD Athlon XP-M 2500+ 2.2GHz 1.5V
Motherboard:	DFI LanParty NFII Ultra-B Bios (TicTac 3D Fire R2)
Cooling:	4 Antec 80mm, TR SI-97 Adapted TT Big Typhoon Fan 120MM
Memory:	2GB Mushkin Redline 4000 @ 200 MHz 2.5V
Video Card:	Sapphire R1950Pro 512MB AGP 1.5V
Hard Disk:	250 & 400 GB Seagate Baracuda 10 SATA
Optical Drive:	2x Samsung Multiformat Rewritable Drives
CRT/LCD Model:	NEC Multisync LCD 1700V
Case:	Antec SX830 EATX Case
Sound Card:	Creative Labs SB XFi Xtreme Music & SB PCI 512
PSU:	Antec NEO HE 500 Watt
Software:	Windows 7 Home Premium
Benchmarks:	Win 7 Eval. CPU 3.9 Ram 4.5 Graphics 6.0 HD 5.7

Mar 4, 2012, 12:32 AM	#14161
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	maybe so but being able to get into windows without a bosd at those clocks is impressive. as for a stable i ran prime for 3 at 4.5ghz

Mar 4, 2012, 12:47 AM	#14162
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,847 (2.67/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	with a different board, clocking wouldnt be so good for you i guess, its the best board i personally ever used for phenom clocking also, if you can boot at 4.8, youre just lucky... pretty good chip __________________ CPU-Z validation sig pics temporarily blocked

Mar 4, 2012, 01:19 AM	#14163
Corduroy_Jr Join Date: Oct 2009 Location: barrie ont Posts: 758 (0.58/day) Thanks: 8 Thanked 62 Times in 49 Posts System Specs	yea well live in the Canada, so i had the doors open that day lmo

Mar 11, 2012, 10:17 AM	#14165
de.das.dude Join Date: Jun 2010 Location: Wild Wild East Posts: 4,585 (4.26/day) Thanks: 2,337 Thanked 1,342 Times in 919 Posts System Specs	http://www.erodov.com/forums/amd-oci...d/50182-2.html lulz. __________________ my wallet isnt hashwell compatiple sad face

System Name:	SuperDuperUberComputer
Processor:	AMD Phenom II 945 X4 3.0Ghz
Motherboard:	ASRock 990FX Extreme 4
Cooling:	CM Hyper 212 EVO push:pull+ 1 panaflow 113CFM + 2 x 120mm NZXTs
Memory:	2x4GB DDR3 Corsair Vengeance 1600MHz CL9
Video Card:	GIGABYTE GTS450 OC2
Hard Disk:	SATA II 80GB Hitachi 7200RPM,W.D 500GB Green \|\| 4GB int + random SD cards
Optical Drive:	ASUS DVD drive
CRT/LCD Model:	Samsung Sync Master 793s CRT\|
Case:	NZXT Guardian 921RB
Sound Card:	Realtek ALC892 with THX True Studio
PSU:	Corsair GS600
Software:	Windows 7 64bit
Benchmarks:	real men dont need to bench :p

System Name:	H3AT
Processor:	AMD Phenom II x6 1100T @ 4.0GHz, 2.8GHz NB
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H100
Memory:	8 GB (2x 4GB) Corsair Vengeance DDR3 1600
Video Card:	MSI NVIDIA GTX 680 2GB
Hard Disk:	Many = 7TB
Optical Drive:	Pioneer Blu Ray ROM / DVD Writer
CRT/LCD Model:	Samsung P2770 27" LCD
Case:	Cooler Master HAF 922
Sound Card:	Creative Sound Blaster Recon3D PCIe
PSU:	Corsair HX620W
Software:	Windows 7 Ultimate x64
Benchmarks:	@_@

System Name:	Eyefinity Gamer
Processor:	Intel i5 3570K @ 4.6 GHz
Motherboard:	ASUS Maximmus V Formula
Cooling:	Corsair H100
Memory:	16 GB G.Skill F3-2666C11Q-16GTXD
Video Card:	AMD Radeon HD7950 3GB x2 w/AMD Catalyst 12.10
Hard Disk:	OCZ Nocti 60GB mSATA, Crucial M4 120GB x2
Optical Drive:	LG BluRay/HD-DVD
CRT/LCD Model:	3x Dell U2412M
Case:	LianLi T60
Sound Card:	N/A
PSU:	Silverstone Strider 750W GOLD
Software:	Windows 8 Pro
Benchmarks:	Benchmarking is for suckers. ;)

Mar 11, 2012, 10:23 PM	#14168
Irony Join Date: Sep 2011 Location: COC WhiterunOrigin Posts: 986 (1.62/day) Thanks: 372 Thanked 243 Times in 197 Posts System Specs	Wow.... Willful ignorance is one of my pet peeves. And when ignorance speaks with a voice of authority. __________________ My Heatware When life gives you lemons, burn Life's house down.

Mar 11, 2012, 11:24 PM	#14169
xBruce88x Join Date: Oct 2009 Location: Winder, GA, USA Posts: 2,218 (1.70/day) Thanks: 652 Thanked 506 Times in 401 Posts System Specs	oh god... this reminds me of when my local computer tech tried to tell me a GPU has nothing to do with Bluray playback and that only a motherboard with an on-board HDMI port could do so. I tried explaining that it has an on-board GPU but he refused to acknowledge such a fact. This all started when I asked him if he had any blu-ray drives for sale. He tried to ask what motherboard i had (even though i bought it from him) but told him i have an 9600GT and should be fine. He refused to sell me one since he thought i'd bring it back when "i found out my motherboard doesn't support bluray" __________________

System Name:	Phenom-inal / IBM T43 2668-45U
Processor:	Phenom II X4 920 OC 3.2ghz / Pentium M 735 1.7Ghz
Motherboard:	ECS IC780M-A V2.0 / T43
Cooling:	7 80mm and 1 92mm case fan, Contac 30 / Stock
Memory:	Super Talent DDR2-800 2x 2GB + G.Skill 2x1GB DDR2 533 / 2x 1GB Samsung DDR2 533
Video Card:	ASUA DirectCU II HD 7850 2GB / ATI X300 64MB
Hard Disk:	500GB Hitachi 16mb 7200RPM, 1x 250GB seagate 2.5in 5400, 160GB IDE / 40GB
Optical Drive:	DVD/CD-RW combo 16x/48x Sony / DVD-ROM CD-R/RW combo
CRT/LCD Model:	ViewSonic @1280x1024 / 14.1in 1024x768
Case:	Unknown but cool / IBM Thinkpad T43
Sound Card:	Klipsch ProMedia 2.1 THX 200W and RT ALC662 / SoundMax via Intel
PSU:	CX500 / 6cell battery - 125w brick
Software:	Windows 7 Pro x64 / XP Pro SP3
Benchmarks:	The IBM can handle Farcry with Med/High settings

Mar 12, 2012, 06:31 AM	#14170
de.das.dude Join Date: Jun 2010 Location: Wild Wild East Posts: 4,585 (4.26/day) Thanks: 2,337 Thanked 1,342 Times in 919 Posts System Specs	lulz. cant believe he is a friend of my cousin. that was written by me and he is the senor moderator at a forum. i left that forum after spamming everywhere __________________ my wallet isnt hashwell compatiple sad face

Mar 23, 2012, 03:18 PM	#14172
WojtasRed Join Date: May 2008 Posts: 405 (0.22/day) Thanks: 61 Thanked 11 Times in 8 Posts System Specs	How can I unlock 4th core in my 720?

Processor:	AMD Phenom II 720 3x2,8 GHz BE
Motherboard:	GIGABYTE GA-MA790X-UD3P AM2+ Bios 7b
Cooling:	Scythe Zipang SCZP-1000
Memory:	2x2GB A-Data Extreme PLUS DDR2 800MHz CL4
Video Card:	PALIT GeForce GTX 560Ti 1GB
Hard Disk:	HDD SEAGATE 250GB ST3250410AS SATA II 16MB
Optical Drive:	LG DVD Recorder ;)
CRT/LCD Model:	Gateway FPD2275W `22
Case:	Shinobi SH09A
Sound Card:	ALC889A HD audio 106dB SNR
PSU:	Thermaltake Toughpower W0116 750W
Software:	Windows 7 Ultimate 64bit

Mar 23, 2012, 04:09 PM	#14174
Athlonite Join Date: Jan 2010 Location: Napier, New Zealand Posts: 1,386 (1.15/day) Thanks: 283 Thanked 441 Times in 345 Posts System Specs	ROFL mobo doesn't support Blue ray I hope your not planning on using him anymore what a moron __________________

System Name:	Xtreme PC's AMDx4
Processor:	AMD Phenom II x4 965BE @ 3.41GHz NB/HT @ 2.4GHz
Motherboard:	Asus Crosshair IV Formula
Cooling:	ThermoLab Baram 1x 120mm SS Air Penartrator 1x SS generic case fan
Memory:	8GB Corsair Vengence LP 1600MHz 9-9-9-24CR1
Video Card:	Sapphire Radeon HD7850 2GB 920/1250MHz
Hard Disk:	2x Samsung HD501IJ Raid0 boot / 1x Samsung HD501IJ + 1x WD 250GB storage
Optical Drive:	1xSATA Pioneer DVR212S 18x
CRT/LCD Model:	Alienware OptX AW2210 22" LCD 1920x1080p
Case:	SilverStone Raven RV02B-W + 3x SS AP181
Sound Card:	Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp
PSU:	SilverStone ST75F-P Modular 750W
Software:	Windows 7 X64 RTM
Benchmarks:	it sucks much

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Introduces AMD LIVE! Ultra Desktop and Notebook PCs	malware	News	4	Jan 8, 2008 11:01 PM
New Enthusiast Products from AMD Command Strong Ecosystem Support	malware	News	8	Nov 20, 2007 06:19 PM
AMD Introduces World's First Comprehensive, Cutting-Edge PC Platform	malware	News	40	Nov 20, 2007 01:33 PM
AMD Introduces Quad-Core Barcelona	malware	News	26	Sep 11, 2007 06:28 PM
AMD drives next generation of energy-efficient computing with 65nm technology transition	DanTheBanjoman	News	6	Dec 6, 2006 12:33 PM