Alienware case, need some ideas.

mdnelson09 · Mar 8, 2012, 09:49 PM

Im stuck on what to do with this, and i would love to hear what tpu has for ideas.

Im planning on modding it out like crazy, i just don't know where to start.

Norton · Mar 8, 2012, 09:58 PM

What's your budget and skill level?

mdnelson09 · Mar 8, 2012, 10:03 PM

I'm pretty "handy" with a grinder and dremel. Budget is pretty dynamic. I already have a motherboard / cpu / ram / and a full water cooling loop

INSTG8R · Mar 8, 2012, 10:07 PM

I always thought that was a pretty cool case as it was. I would just load it up with kick ass hardware.

Norton · Mar 8, 2012, 10:09 PM

Quote:

Originally Posted by mdnelson09

I'm pretty "handy" with a grinder and dremel. Budget is pretty dynamic. I already have a motherboard / cpu / ram / and a full water cooling loop

What do you have? board type, water setup type, GPU??

I do have an idea but I would like to know what parts you are using

mdnelson09 · Mar 8, 2012, 10:13 PM

I have a i5 2300 / Asrock Extreem3 Gen3. No gpu for right now. Im really like the gray / white / purple color scheme.

Edit: I have a XSPC dual rez with a built in pump. 2x 120mm Radiator, xspc cpu waterblock.

FreedomEclipse · Mar 8, 2012, 10:19 PM

only my opinion - but that 2300 aint worth water cooling as you cant overclock it anyway. Sell it off and grab a 2500k or wait for ivy bridge. as for GPUs i think a 7950 would be nice.

secondly based on my observations, i dont think that case is good on airflow. fan on the side panel would help but it would ruin the case somewhat.

good luck anyway

mdnelson09 · Mar 8, 2012, 10:25 PM

Quote:

Originally Posted by FreedomEclipse

[...] Sell it off and grab a 2500k or wait for ivy bridge. as for GPUs i think a 7950 would be nice.[...]

Ive been thinking about it for a while, im just using the 2300 as somethign to use till i can pay for the 2500k. Ivy is too much for this build.
T_ski has 2x 6970's with w/b's i may pick up.

Quote:

Originally Posted by FreedomEclipse

secondly based on my observations, i dont think that case is good on airflow.
good luck anyway

Yes its terrible for air flow. This mods are more for fun than anything

Red_Machine · Mar 8, 2012, 10:25 PM

Ah man, I was just thinking about this case. Nearly bought the OEM version two years ago and would love it for an Athlon XP build I have in mind.

Norton · Mar 8, 2012, 10:25 PM

Here's my idea....not entirely sure if possible:

Put your entire loop into the PSU area above the Mobo- vent your radiators heat out thru the top and PSU hole

AND

PSU relocated to bottom/front of case

Would need to do a lot of measuring followed by cutting, fitting, and swearing

mdnelson09 · Mar 8, 2012, 10:27 PM

Quote:

Originally Posted by Red_Machine

Ah man, I was just thinking about this case. Nearly bought the OEM version two years ago and would love it for an Athlon XP build I have in mind.

Well, I came to TPU to get some ideas, i would probably end up destroying it. If you wanted to we can work out a deal for the case.
Edit: Realized just now your quite far away. :P sorry

TacoTown · Mar 8, 2012, 10:29 PM

Put one 240mm rad up at the top with the PSU, and take out the HDDs and put the second there, then put a window in the side panel?

mdnelson09 · Mar 8, 2012, 10:32 PM

Quote:

Originally Posted by Norton

Here's my idea....not entirely sure if possible:

Put your entire loop into the PSU area above the Mobo- vent your radiators heat out thru the top and PSU hole

AND

PSU relocated to bottom/front of case

Would need to do a lot of measuring followed by cutting, fitting, and swearing

That's a good idea. i don't think it can be done with how the chassis is. Its really durable though.

mdnelson09 · Mar 8, 2012, 10:45 PM

My radiator flat against the top. You can see, with one fan, the psu won't fit.
The radiator doesnt fit right on the bottom... UNLESSs...... i put the psu where the hdd bay 'was' like on the Raven RV03

And here's the radiator next to the hdd bay. im sure that will come out first. and the floppy. Looks like the optical drive will come out and ill replace it with something home made.

Norton · Mar 8, 2012, 10:52 PM

I was thinking putting the rad with push/pull fans on the cross brace above the motherboard... then ducting the rad right out the PSU hole.

Cut the HDD bay out to fit the PSU and pickup a couple icy dock style HDD bays or unit to mount under the optical bays above the PSU.

*** EDIT- HDD bays access from inside the case- just in a quality casing (a 3x3.5" to 2x5.25" bay unit should fit there) ***

ThE_MaD_ShOt · Mar 8, 2012, 11:27 PM

Cut a hole in the metal portion of the top (as the top is 2 layers) big enough for the rad to sit in. This should give you more clearance. The outer top is plastic so you can cut holes for fans in it.

mdnelson09 · Mar 8, 2012, 11:42 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Cut a hole in the metal portion of the top (as the top is 2 layers) big enough for the rad to sit in. This should give you more clearance. The outer top is plastic so you can cut holes for fans in it.

I think it would throw off the look of the case if i put holes in the plastic, unless its more planned on my end. I love the input guys!

mdnelson09 · Mar 17, 2012, 09:17 PM

Here's the case, after i finished the mods, if any one was wondering.

ThE_MaD_ShOt · Mar 17, 2012, 09:30 PM

Nice work there.

Krazy Owl · Mar 17, 2012, 09:35 PM

Cut a hole on top drop a kind of Ram air on it with mesh grill and get a 120mm bolted inside so the air come in. Will be like a special air intake for alien spaceship

mdnelson09 · Mar 17, 2012, 09:58 PM

I would if the top didn't take me most of the time already, haha. sick idea, and it might work with the headroom the case has, the only thing that bugs me is there isnt much room becasue of the cables. maybe some home made wiring would solve this. :P Something for another day

St.Alia-Of-The-Knife · Mar 23, 2012, 07:09 PM

Do an interior paintjob and get rid of the ugly metallic gray inside!

DonInKansas · Mar 23, 2012, 07:21 PM

Quote:

Originally Posted by St.Alia-Of-The-Knife

Do an interior paintjob and get rid of the ugly metallic gray inside!

Which doesn't matter since there's no side window. If he cuts a window, then I'd paint the interior.

mdnelson09 · Mar 24, 2012, 05:00 AM

Quote:

Originally Posted by St.Alia-Of-The-Knife

Do an interior paintjob and get rid of the ugly metallic gray inside!

I did, all black.

zootac · Mar 24, 2012, 05:06 AM

People pay about 60 pounds up over on e.bay from them area 51 cases just a stand alone cases,

Mar 8, 2012, 09:49 PM	#1
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	Alienware case, need some ideas. Im stuck on what to do with this, and i would love to hear what tpu has for ideas. Im planning on modding it out like crazy, i just don't know where to start. __________________ Heat! STUFF FOR SALE ---

System Name:	G5 mod
Processor:	Phenom II 965
Motherboard:	Asus Crosshair III Formula ROG
Cooling:	XSPC watercooling kit
Memory:	4x2gb Corsair Dominator
Video Card:	Vision Tech HD 6850
Hard Disk:	500gb Western Digital Black
Optical Drive:	LiteOn Dvd DL burner
CRT/LCD Model:	(3) Samsung 19 inch @ 1440x900 each
Case:	Apple Mac G5
PSU:	Kingwin LAZER Power Supply 750watts w/ Universal modular Connectors
Software:	Windows 7 Ultimate

Mar 8, 2012, 09:58 PM	#2
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,126 (9.95/day) Thanks: 5,362 Thanked 10,006 Times in 3,161 Posts System Specs	What's your budget and skill level? __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Mothers Day Challenge (5/10 thru 5/19- crunch for our Team, for Mom, for games and prizes )**

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Mar 8, 2012, 10:03 PM	#3
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	I'm pretty "handy" with a grinder and dremel. Budget is pretty dynamic. I already have a motherboard / cpu / ram / and a full water cooling loop __________________ Heat! STUFF FOR SALE ---

Mar 8, 2012, 10:07 PM	#4
INSTG8R Join Date: Nov 2004 Location: Lost in Norway Posts: 2,581 (0.83/day) Thanks: 934 Thanked 378 Times in 320 Posts System Specs	I always thought that was a pretty cool case as it was. I would just load it up with kick ass hardware. __________________ Sys. Specs. i7 2600K@4.6\|ASUS P67 Sabertooth\|2x4096 Corsair Vengence 1600 \|Sapphire HD7970 OC\|WD Caviar Black 6.0Gbps 1TB x2@RAID 0\|SB X-Fi Fatality Pro\|TT Toughpower 1.2kW\|TT Kandalf L.C.S.\|Acer V243H 24" 1920x1080\|Logitech G25\|Logitech G500\|Logitech G19\|Saitek X-52 Pro\|TrackIR4 w/Trackclip Pro

System Name:	Hellbox 2.1(same case new guts)
Processor:	i7 2600k@4.6(1.36V max)
Motherboard:	Asus P67 Sabertooth
Cooling:	TT Kandalf L.C.S.(Water/Air)AC Cuplex Kryos CPU Block
Memory:	2x4096 Corsair Vengance 1600
Video Card:	Sapphire HD7970 OC Edition(1000/1450)
Hard Disk:	WD Caviar Black SATA 3 1TB x2 RAID 0
Optical Drive:	LG GSA-4166B DVD+RW DL/DVD-RAM
CRT/LCD Model:	Acer V243H 24" 1920x1080
Case:	TT Kandalf L.C.S.
Sound Card:	X-Fi Fatality Pro Champion on Creative/SBS 650s
PSU:	TT Toughpower 1200W
Software:	Win7 Pro x64

Mar 8, 2012, 10:13 PM	#6
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	I have a i5 2300 / Asrock Extreem3 Gen3. No gpu for right now. Im really like the gray / white / purple color scheme. Edit: I have a XSPC dual rez with a built in pump. 2x 120mm Radiator, xspc cpu waterblock. __________________ Heat! STUFF FOR SALE --- Last edited by mdnelson09; Mar 8, 2012 at 10:18 PM.

Mar 8, 2012, 10:19 PM	#7
FreedomEclipse Crazy Dogmatic Bullsh!t! Join Date: Apr 2007 Location: (British Born Chinese) London, United Kingdom Posts: 7,514 (3.38/day) Thanks: 823 Thanked 1,597 Times in 1,280 Posts System Specs	only my opinion - but that 2300 aint worth water cooling as you cant overclock it anyway. Sell it off and grab a 2500k or wait for ivy bridge. as for GPUs i think a 7950 would be nice. secondly based on my observations, i dont think that case is good on airflow. fan on the side panel would help but it would ruin the case somewhat. good luck anyway __________________ “I used to be a serial upgrader like you, then i took a downgrade to the knee” -FreedomEclipse

System Name:	Codename: Rapture X {MoonPig Edition}
Processor:	Intel 3930k@4.6Ghz
Motherboard:	Asus P9X79 PRO
Cooling:	Corsair H80i {2xScythe G.T AP-15}
Memory:	16GB DDR3 Kingston Hyper X 2133Mhz {4x4GB}
Video Card:	2xMSI GTX680 Twin Frozr OC {SLi}
Hard Disk:	256GB Plextor M5 Pro Xtreme (Boot) \|WD: 2x1.5TB FAEX\|1x2TB EARS\|1x1.5TB Samsung F4EG
Optical Drive:	N/A
CRT/LCD Model:	NEC MultiSync EA231WMi 23" {Black}
Case:	Fractal Define XL {3x140mm,1x180mm Silverstone A.P'}
Sound Card:	Creative SB Z {Speakers: Logitech Z-5500 }
PSU:	Corsair HX1050 Bro'fessional
Software:	Windows 7 7600 x64
Benchmarks:	(╯°□°）╯︵ ┻━┻

Mar 8, 2012, 10:25 PM	#9
Red_Machine Join Date: Oct 2010 Location: Marlow, ENGLAND Posts: 1,454 (1.51/day) Thanks: 149 Thanked 279 Times in 226 Posts System Specs	Ah man, I was just thinking about this case. Nearly bought the OEM version two years ago and would love it for an Athlon XP build I have in mind. __________________ Alienware M11x R1 Netbook: 1.3GHz Core2 Duo U7300 (OC'd to 1.7GHz) \| 8GB Corsair DDR3 1333MHz \| nVIDIA GeForce GT 335M 1GB/Intel GMA 4500MHD Hyrbid Graphics System \| Western Digital Scorpio Black 500GB \| Microsoft Windows 7 Home Premium 64-bit Microsoft Certified Desktop Support Technician \| CompTIA A+ Certified Heatware

System Name:	Chachamaru-III
Processor:	Intel Core i7 3770K (OC'd to 4.5GHz)
Motherboard:	BIOSTAR TZ77XE4 (Intel Z77 Chipset)
Cooling:	Thermaltake CLW0217 Water 2.0 Extreme, case fully populated
Memory:	16GB G.Skill Ares 1600MHz (2x8GB) [10 10-10-10]
Video Card:	Palit GeForce GTX 580 1.5GB
Hard Disk:	128GB Samsung 830 (OS), Seagate Barracuda 3TB RAID1 Array (Storage), Seagate Barracuda 750GB (Steam)
Optical Drive:	LG GGW-H20L DVD±RW/BD-RW/HD DVD-ROM Drive
CRT/LCD Model:	DGM L-2231WD 22" @ 1680x1050, Toshiba Regza 32" @ 1920x1080 & Dell 1708fp 17" @ 1280x1024
Case:	Coolermaster HAF 922
Sound Card:	Creative SoundBlaster X-Fi Xtreme Gamer Alienware Edition
PSU:	Silverstone Olympia SST-OP1000 1kW
Software:	Microsoft Windows 7 Professional 64-bit

Mar 8, 2012, 10:29 PM	#12
TacoTown Join Date: Jun 2011 Location: Canadia Posts: 1,825 (2.55/day) Thanks: 1,755 Thanked 925 Times in 550 Posts System Specs	Put one 240mm rad up at the top with the PSU, and take out the HDDs and put the second there, then put a window in the side panel? __________________ Can I see your brown ninja? I ate a taco for the first time ever today. Feb 27/2012 Steam: TacoTown Origin: TheTacoTown

System Name:	Sexy Vanilla Freshness / The Sister / The I don't know what to do with it
Processor:	Core i5 3570K @4.5ghz 1.25V/ Phenom II 925 @ 3.6ghz 1.2V / Phenom II 955
Motherboard:	ASUS P8Z77-V / Asrock A770De+ / M4A785-M
Cooling:	Coolit ECO A.C.L / Corsair H40 / stock
Memory:	M379B5273DH0-YK0 2X4GB sticks/ 8 gigs 667 / 6 gigs 667
Video Card:	Sapphire HD 6870 / XFX 5770 XXX edition / OEM 4670
Hard Disk:	Toshiba MK5065GSX+ST375052+WD10EZEX / 1x WD1500 Black / Seagate 160 gig
Optical Drive:	None / LG supermulti drive
CRT/LCD Model:	Acer S200HL+Acer P206HV / LG 22LD350 / N/A
Case:	HAF X 912 / NZXT Trinity / N/A
Sound Card:	Onboard / Onboard
PSU:	Seasonic 750X / ROSEWILL RG630-S12 630W RT / Bestec 400
Software:	Windows 7 Home Premium 64 bit / Windows 7 Ultimate / MacOS
Benchmarks:	Once I saw a turtle with a taco on it's back, I hope hes still out there. Rock on Taco turtle, rock

Mar 8, 2012, 10:45 PM	#14
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	My radiator flat against the top. You can see, with one fan, the psu won't fit. The radiator doesnt fit right on the bottom... UNLESSs...... i put the psu where the hdd bay 'was' like on the Raven RV03 And here's the radiator next to the hdd bay. im sure that will come out first. and the floppy. Looks like the optical drive will come out and ill replace it with something home made. __________________ Heat! STUFF FOR SALE ---

Mar 8, 2012, 10:52 PM	#15
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,126 (9.95/day) Thanks: 5,362 Thanked 10,006 Times in 3,161 Posts System Specs	I was thinking putting the rad with push/pull fans on the cross brace above the motherboard... then ducting the rad right out the PSU hole. Cut the HDD bay out to fit the PSU and pickup a couple icy dock style HDD bays or unit to mount under the optical bays above the PSU. * EDIT- HDD bays access from inside the case- just in a quality casing (a 3x3.5" to 2x5.25" bay unit should fit there) * __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Mothers Day Challenge (5/10 thru 5/19- crunch for our Team, for Mom, for games and prizes )**

Mar 8, 2012, 11:27 PM	#16
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,739 (6.97/day) Thanks: 2,529 Thanked 2,443 Times in 1,468 Posts System Specs	Cut a hole in the metal portion of the top (as the top is 2 layers) big enough for the rad to sit in. This should give you more clearance. The outer top is plastic so you can cut holes for fans in it. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Mar 17, 2012, 09:17 PM	#18
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	Here's the case, after i finished the mods, if any one was wondering. __________________ Heat! STUFF FOR SALE ---

Mar 17, 2012, 09:30 PM	#19
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,739 (6.97/day) Thanks: 2,529 Thanked 2,443 Times in 1,468 Posts System Specs	Nice work there. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Mar 17, 2012, 09:35 PM	#20
Krazy Owl Banned Join Date: Jan 2012 Location: Montreal Posts: 889 (1.80/day) Thanks: 122 Thanked 77 Times in 54 Posts System Specs	Cut a hole on top drop a kind of Ram air on it with mesh grill and get a 120mm bolted inside so the air come in. Will be like a special air intake for alien spaceship

System Name:	HTPC-Cube
Processor:	AMD Athlon 64 skt754 3200+ 1M cache
Motherboard:	Foxconn Winfast K8S760MG-6LRS
Cooling:	Stock
Memory:	2 gigs DDR400
Video Card:	HIS IceQ 4670 AGP 1gig DDR3
Hard Disk:	White label 80gigs sata
Optical Drive:	DVD-RW
CRT/LCD Model:	Polaroid 19 inches 1366X768 LED
Case:	Chenming cube
Sound Card:	Onboard
PSU:	Raidmax RX-500S
Software:	Seven Pro 64bits

Mar 17, 2012, 09:58 PM	#21
mdnelson09 Join Date: Mar 2011 Location: Minnesota Posts: 251 (0.31/day) Thanks: 41 Thanked 26 Times in 21 Posts	I would if the top didn't take me most of the time already, haha. sick idea, and it might work with the headroom the case has, the only thing that bugs me is there isnt much room becasue of the cables. maybe some home made wiring would solve this. :P Something for another day __________________ Heat! STUFF FOR SALE ---

Mar 23, 2012, 07:09 PM	#22
St.Alia-Of-The-Knife Join Date: Mar 2011 Location: Montreal, Canada Posts: 191 (0.24/day) Thanks: 25 Thanked 32 Times in 20 Posts System Specs	Do an interior paintjob and get rid of the ugly metallic gray inside! __________________

Processor:	Phenom II 955 @ 3955Mhz 1.45v
Motherboard:	ASUS M4A79XTD EVO
Cooling:	CoolerMaster Hyper TX3 push-pull /2x140mm + 2x230mm + 2x120mm = super noisy computer
Memory:	4x2Gb Kingston DDR3-1333 8-8-8-22 @ 1527Mhz
Video Card:	Crossfire 2x Sapphire Radeon 6850 @ 850/1200
Hard Disk:	320Gb Western Digital WD3200AAJS
Optical Drive:	Sony DRU-820A dvd burner /Lite-On LT48327S cd burner
CRT/LCD Model:	Samsung 23" 1920x1080
Case:	Azza Solano 1000R Full-Tower
Sound Card:	VIA VT1708S (integrated) + quadraphonic speakers
PSU:	CoolerMaster Extreme Power Plus 700w
Software:	Windows 7 Ultimate 64bit

Processor:	Core i5 750
Motherboard:	Gigabyte p55-ud3r
Cooling:	Zalman CNPS10X Extreme
Memory:	Geil 2133mhz DDR3
Video Card:	XFX 6870
Hard Disk:	120GB GSkill Phoenix Pro, 640GB WD Black
Optical Drive:	Sony DVDRW SATA
CRT/LCD Model:	LG 23" 1920x1080
Case:	Antec One
Sound Card:	Onboard
PSU:	Antec HCG 620W
Software:	Windows 7 Pro x64

Mar 24, 2012, 05:06 AM	#25
zootac Join Date: Mar 2012 Location: england Posts: 121 (0.28/day) Thanks: 142 Thanked 39 Times in 21 Posts	People pay about 60 pounds up over on e.bay from them area 51 cases just a stand alone cases,

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need some new case Ideas	trt740	Cases, Modding & Electronics	8	Aug 6, 2011 08:20 AM
Need some ideas for a build.	andrewsmc	General Hardware	4	Oct 8, 2009 09:06 AM
Need some ideas.	TheMailMan78	General Software	2	Jul 25, 2009 04:26 PM
Need some ideas	ShiBDiB	Games	3	Jul 28, 2008 12:46 AM
Need some ideas pls	Firebeast	Cases, Modding & Electronics	4	Mar 14, 2008 08:59 AM