Crunchers Helping Crunchers - Page 101

Arjai · May 13, 2012, 02:44 AM

Quote:

Originally Posted by JrRacinFan

Swap drives between rigs.

Maybe tomorrow...I've had enough fun for one day!!

Plus, I'll have to go buy some blanks and it's past open store time around here.

Thanks for the info JR, If my buddy doesn't come through with an Ubuntu disk I'll probably load Lisa.

Most of what I've heard is that Ubuntu 11.10 was the shizzle and that's what Lisa is based on...and if you say it's a breeze, good. I could use something easy after today!

Take care fellow crunchers! I'll check in tomorrow, hopefully on the P4!!

Now, for real, I'm outta here! Whiskey, HERE I COME!!!

hertz9753 · May 13, 2012, 03:40 AM

Quote:

Originally Posted by Arjai

Maybe tomorrow...I've had enough fun for one day!!

Plus, I'll have to go buy some blanks and it's past open store time around here.

Thanks for the info JR, If my buddy doesn't come through with an Ubuntu disk I'll probably load Lisa.

Most of what I've heard is that Ubuntu 11.10 was the shizzle and that's what Lisa is based on...and if you say it's a breeze, good. I could use something easy after today!

Take care fellow crunchers! I'll check in tomorrow, hopefully on the P4!!

Now, for real, I'm outta here! Whiskey, HERE I COME!!!

Good luck!

Sorry about post from the "TPU folder" we don't roll like that.

Arjai · May 13, 2012, 05:14 PM

Quote:

Originally Posted by T4C Fantasy

hahah thats fucked up

i never heard of someone spending 9 dollars to triple the cpu power hahahaha

This old thing has a 1.6 GHz P4 in it. I'm trying to make it into a cruncher, not much else it is good for. I happened to see the 3.0 P4's for $9 and kinda freaked!

JrRacinFan · May 13, 2012, 05:29 PM

Check around for a 400fsb p4, 95% sure your board will take it without complaints.
http://www.starmicroinc.net/product/...-512K-OEM-CPU/

Arjai · May 13, 2012, 08:49 PM

Quote:

Originally Posted by JrRacinFan

Burn it to CD-R. http://imgburn.com/ then boot from disc(you have option to run it Live or install it). I have yet to touch another distro that is so easy to use and utilize. Pretty much plug, install wcg and crunch away. Stable enough in my use that it very rarely needs a reboot.

Drives are switched, or CD R/W is attached, ghetto style, to This Old Comp and I have some CD-R disks but, ImgBurn won't open!

ThE_MaD_ShOt · May 13, 2012, 10:35 PM

What os are you using? Have you troed isorecorder? It's what I use to burn iso's.

Arjai · May 13, 2012, 11:57 PM

Quote:

Originally Posted by ThE_MaD_ShOt

What os are you using? Have you troed isorecorder? It's what I use to burn iso's.

For some reason, I don't know, all of the downloads download but then during, or even before, setup, they freeze.

They move up and down the processes list on Task Manager but, the cpu usage for them sits at zero.

I have rebooted multiple times, did a Malwarebytes scan, downloaded Microsoft updates....IDK what's going on!

So now, ISO Recorder is doing the same. I got as far as it opening a command line window, then nothing, for over 10 minutes. Task Manager says it is running, but it's just hung up, like the rest of them!

ThE_MaD_ShOt · May 14, 2012, 12:18 AM

It shouldn't open a command line window. Right click your iso file and click copy image to cd/dvd.

Arjai · May 14, 2012, 12:38 AM

Alright, dumped all the free burners and just used Windows. I hope it works! I'll be back in about an hour and let you know! Wish me luck!!

brandonwh64 · May 14, 2012, 12:39 AM

Quote:

Originally Posted by Arjai

Alright, dumped all the free burners and just used Windows. I hope it works! I'll be back in about an hour and let you know! Wish me luck!!

Windows will not work it will just burn the ISO file to the CD not image the disc

Arjai · May 14, 2012, 12:41 AM

ISO Burner setup is still running. But, when I right clicked a file, the ISO Burner window opened.

Windows won't work? Alright. Then I'll give this ISO Burner a try at it!

Arjai · May 14, 2012, 12:53 AM

ISO Burner says it's complete...see you all in a bit!

Arjai · May 14, 2012, 03:01 AM

Well, Mint is installed! Yea! Bad news is now it won't connect to the internet. I changed the cat-5 line and everything. Plus I now realize I know nothing about MAC addresses and that is what is messing me up. It says it's trying to connect with the MAC addy on the Device.

The built in Ethernet was working during install but, when I re-booted, as it asked me to do, it couldn't find a connection!

So, all that for nothing!! TWO DAYS dickin' around with this P4 and now it won't connect!

Thanks to all of you that have gotten me this far (C-P M-S B-64 and Norton and JR)but like most everything, lately, it's never done nor easily gotten.

So, here I am again, asking for help. I thought that the install went so well the crap was over.

Linux guru's, how do I fix my connection failure?

JrRacinFan · May 14, 2012, 03:14 AM

MAC address is "basically" what assigns an IP when you have DHCP enabled. Easy way to get it, boot off the Live CD, connect to your router and check its client table. Hard way, there should be a sticker on the mobo near the ethernet port.

Arjai · May 14, 2012, 04:21 AM

Quote:

Originally Posted by JrRacinFan

MAC address is "basically" what assigns an IP when you have DHCP enabled. Easy way to get it, boot off the Live CD, connect to your router and check its client table. Hard way, there should be a sticker on the mobo near the ethernet port.

It has a MAC address that it found but, even after rebooting my Netgear the cat-5 plugged into the number3 slot is plugged into the back of the P4, with Ethernet lights on, solid, it is still not lit on the Netgear.

I also tried to run 'ifconfig -a' with terminal and it shows the exact same MAC. The Ethernet was working, now it's not. I've used two different, working cables. The only thing different is now Mint is installed.

During install it worked!

Arjai · May 14, 2012, 04:24 AM

Is there such a thing as a PCI RJ45 10/100 Ethernet cards? Cause Methinks maybe this onboard is dead? Even with the red and green lights on?

Damn this is irritating!!

EDIT: I'm shuttin' her down. Gotta get some sleep.

If anyone can think of why my wired connection, Mint Speak, won't connect, Please let me know!

brandonwh64 · May 14, 2012, 01:58 PM

Ok have a huge request!! CP if you could please post the in the OP I would appreciate it. My wife has flipped out again over my 6 core cruncher being open in our living room on a test bench for the last time. Would anyone PLEASE have a mATX AM2+/AM3 motherboard with onboard video they would trade me for my MSI K9A2 Platinum ATX 790FX board. I am desperate at this point. I may have to pack this cruncher up until I come across one.

stinger608 · May 15, 2012, 12:25 AM

Quote:

Originally Posted by brandonwh64

Ok have a huge request!! CP if you could please post the in the OP I would appreciate it. My wife has flipped out again over my 6 core cruncher being open in our living room on a test bench for the last time. Would anyone PLEASE have a mATX AM2+/AM3 motherboard with onboard video they would trade me for my MSI K9A2 Platinum ATX 790FX board. I am desperate at this point. I may have to pack this cruncher up until I come across one.

Damn Brandon, wish I had one but I just don't anymore man. Hopefully someone has one they are willing to swap ya out with bro.

Norton · May 15, 2012, 01:14 PM

I have another AMD rig in progress but I'm in need of a CPU.

I will eventually pickup an X4 or X6 AM3 chip for it but in the meantime...

Does anyone have an AM2/AM2+/AM3 CPU sitting idle that I can pickup for cheap. It doesn't really matter how many cores or what generation as I can run anything but FX in my crunching rigs (140W support in all of them)... just need something to stick in a rig to keep it crunching

PM to discuss if you have something that will work for me.

brandonwh64 · May 15, 2012, 01:19 PM

Quote:

Originally Posted by Norton

I have another AMD rig in progress but I'm in need of a CPU.

I will eventually pickup an X4 or X6 AM3 chip for it but in the meantime...

Does anyone have an AM2/AM2+/AM3 CPU sitting idle that I can pickup for cheap. It doesn't really matter how many cores or what generation as I can run anything but FX in my crunching rigs (140W support in all of them)... just need something to stick in a rig to keep it crunching

PM to discuss if you have something that will work for me.

I have a AM2 dual core if you want it.

Norton · May 15, 2012, 01:23 PM

Quote:

Originally Posted by brandonwh64

I have a AM2 dual core if you want it.

I may if I can't locate an X3/X4- what model?

YGPM- Thx!

brandonwh64 · May 15, 2012, 01:25 PM

Quote:

Originally Posted by Norton

I may if I can't locate an X3/X4- what model?

Ok well its sitting here on my desk in the plastic case. I can mail USPS First class for you no problem.

Chicken Patty · May 15, 2012, 01:29 PM

Brandon

Norton · May 15, 2012, 01:38 PM

Quote:

Originally Posted by brandonwh64

Ok well its sitting here on my desk in the plastic case. I can mail USPS First class for you no problem.

Thanks- that chip will allow me to keep all of the rigs going

brandonwh64 · May 15, 2012, 01:44 PM

Chip will be in the mail tomorrow

Push it to the max!

I had one of these OCed to like 3ghz+ if its the one I remember having. They have been on my desk for atleast 5 months collecting dust.

System Name:	This Old Comp/ P4 Cruncher/ MAD Cruncher/ ASUS Ultrabook
Processor:	AMD XP 2600+ / 2.8GHz P4 400FSB/ Athlon 64x2 2GHz/ i5 1.7GHz
Motherboard:	MSI KT4V / Dublin/ MSI/ ASUStek
Cooling:	Air cooling for ever!!
Memory:	2 SuperTalent 1gigs and a 256 / 2 TT's and a No name, 256-er's/ 2 gig OCZ & Corsair 512's/6GB's of ?
Video Card:	nVidea GeForce 6600 GT 128mb/? VGA card/ GeForce FX 5500/Intel 4000
Hard Disk:	250g Hitachi & 40g WD/ 200g WD/ 40g WD/750 Hitachi & 24GB Kingston SSD
Optical Drive:	Generic IDE DVD ROM/ CD R/W/ LiteON DVD ROM CD r\w/DVD RW
CRT/LCD Model:	Acer 223w, sister-ed/ built in
Case:	no name case/ Emachines small/ Pixxo CX-5C59 Black Mid/ALU, beauty!
Sound Card:	Realtec AC97, sucky ducky/ ? built in/ ? built in/ Sonic Master
PSU:	Sparkle 350w Dual Bridge/ 280w no namer/ ?/ ASUS power brick-ette
Software:	windows 7 ultimate 32 bit/Linux Mint, Lisa/ Ubuntu 11.10/ WIN8
Benchmarks:	Nothing to brag about/ just a cruncher/ TPU Cruncher! / 6.9 processes per second!

System Name:	Fuzzy Bunny
Processor:	AMD Phenom II X4 980
Motherboard:	Foxconn Destroyer
Cooling:	Corsair H50
Memory:	OCZ Reaper HPC 4GB (2 x 2GB)
Video Card:	Nvidia GTX 570
Hard Disk:	Western Digital Caviar Black WD7501AALS 750GB
Optical Drive:	Sony
CRT/LCD Model:	ASUS VW222U 22"
Case:	Antec 300
Sound Card:	Stock
PSU:	CoolerMaster Gold 1000 Watt
Software:	Windows 7 64

System Name:	This Old Comp/ P4 Cruncher/ MAD Cruncher/ ASUS Ultrabook
Processor:	AMD XP 2600+ / 2.8GHz P4 400FSB/ Athlon 64x2 2GHz/ i5 1.7GHz
Motherboard:	MSI KT4V / Dublin/ MSI/ ASUStek
Cooling:	Air cooling for ever!!
Memory:	2 SuperTalent 1gigs and a 256 / 2 TT's and a No name, 256-er's/ 2 gig OCZ & Corsair 512's/6GB's of ?
Video Card:	nVidea GeForce 6600 GT 128mb/? VGA card/ GeForce FX 5500/Intel 4000
Hard Disk:	250g Hitachi & 40g WD/ 200g WD/ 40g WD/750 Hitachi & 24GB Kingston SSD
Optical Drive:	Generic IDE DVD ROM/ CD R/W/ LiteON DVD ROM CD r\w/DVD RW
CRT/LCD Model:	Acer 223w, sister-ed/ built in
Case:	no name case/ Emachines small/ Pixxo CX-5C59 Black Mid/ALU, beauty!
Sound Card:	Realtec AC97, sucky ducky/ ? built in/ ? built in/ Sonic Master
PSU:	Sparkle 350w Dual Bridge/ 280w no namer/ ?/ ASUS power brick-ette
Software:	windows 7 ultimate 32 bit/Linux Mint, Lisa/ Ubuntu 11.10/ WIN8
Benchmarks:	Nothing to brag about/ just a cruncher/ TPU Cruncher! / 6.9 processes per second!

May 13, 2012, 05:29 PM	#2504
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.05/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	Check around for a 400fsb p4, 95% sure your board will take it without complaints. http://www.starmicroinc.net/product/...-512K-OEM-CPU/ __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

May 13, 2012, 10:35 PM	#2506
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.72/day) Thanks: 2,641 Thanked 2,518 Times in 1,507 Posts System Specs	What os are you using? Have you troed isorecorder? It's what I use to burn iso's. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

System Name:	Selene / Main / Xp Gaming rig
Processor:	Phenom II x6 1055t @ 3.5 / Phenom II x6 1090t @ 3.6 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	Spire TME III / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 2gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek HD7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 650 watt / Corsair TX 750 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

May 14, 2012, 12:18 AM	#2508
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.72/day) Thanks: 2,641 Thanked 2,518 Times in 1,507 Posts System Specs	It shouldn't open a command line window. Right click your iso file and click copy image to cd/dvd. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

May 14, 2012, 12:38 AM	#2509
Arjai Join Date: Apr 2012 Location: St. Paul, MN Posts: 236 (0.53/day) Thanks: 305 Thanked 265 Times in 90 Posts System Specs	Alright, dumped all the free burners and just used Windows. I hope it works! I'll be back in about an hour and let you know! Wish me luck!! __________________ % of total team credit 0.00231% , makin' my mark! Up ten ten thousands% ! :P) "Going to make it into an ottoman, too?" -t_ski "I used to like Lian-Li cases. Then they took a hipster in the knee." -RCoon

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

May 14, 2012, 12:41 AM	#2511
Arjai Join Date: Apr 2012 Location: St. Paul, MN Posts: 236 (0.53/day) Thanks: 305 Thanked 265 Times in 90 Posts System Specs	ISO Burner setup is still running. But, when I right clicked a file, the ISO Burner window opened. Windows won't work? Alright. Then I'll give this ISO Burner a try at it! __________________ % of total team credit 0.00231% , makin' my mark! Up ten ten thousands% ! :P) "Going to make it into an ottoman, too?" -t_ski "I used to like Lian-Li cases. Then they took a hipster in the knee." -RCoon

May 14, 2012, 12:53 AM	#2512
Arjai Join Date: Apr 2012 Location: St. Paul, MN Posts: 236 (0.53/day) Thanks: 305 Thanked 265 Times in 90 Posts System Specs	ISO Burner says it's complete...see you all in a bit! __________________ % of total team credit 0.00231% , makin' my mark! Up ten ten thousands% ! :P) "Going to make it into an ottoman, too?" -t_ski "I used to like Lian-Li cases. Then they took a hipster in the knee." -RCoon

May 14, 2012, 03:01 AM	#2513
Arjai Join Date: Apr 2012 Location: St. Paul, MN Posts: 236 (0.53/day) Thanks: 305 Thanked 265 Times in 90 Posts System Specs	Well, Mint is installed! Yea! Bad news is now it won't connect to the internet. I changed the cat-5 line and everything. Plus I now realize I know nothing about MAC addresses and that is what is messing me up. It says it's trying to connect with the MAC addy on the Device. The built in Ethernet was working during install but, when I re-booted, as it asked me to do, it couldn't find a connection! So, all that for nothing!! TWO DAYS dickin' around with this P4 and now it won't connect! Thanks to all of you that have gotten me this far (C-P M-S B-64 and Norton and JR)but like most everything, lately, it's never done nor easily gotten. So, here I am again, asking for help. I thought that the install went so well the crap was over. Linux guru's, how do I fix my connection failure? __________________ % of total team credit 0.00231% , makin' my mark! Up ten ten thousands% ! :P) "Going to make it into an ottoman, too?" -t_ski "I used to like Lian-Li cases. Then they took a hipster in the knee." -RCoon

May 14, 2012, 03:14 AM	#2514
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.05/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	MAC address is "basically" what assigns an IP when you have DHCP enabled. Easy way to get it, boot off the Live CD, connect to your router and check its client table. Hard way, there should be a sticker on the mobo near the ethernet port. __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

May 14, 2012, 04:24 AM	#2516
Arjai Join Date: Apr 2012 Location: St. Paul, MN Posts: 236 (0.53/day) Thanks: 305 Thanked 265 Times in 90 Posts System Specs	Is there such a thing as a PCI RJ45 10/100 Ethernet cards? Cause Methinks maybe this onboard is dead? Even with the red and green lights on? Damn this is irritating!! EDIT: I'm shuttin' her down. Gotta get some sleep. If anyone can think of why my wired connection, Mint Speak, won't connect, Please let me know! __________________ % of total team credit 0.00231% , makin' my mark! Up ten ten thousands% ! :P) "Going to make it into an ottoman, too?" -t_ski "I used to like Lian-Li cases. Then they took a hipster in the knee." -RCoon Last edited by Arjai; May 14, 2012 at 04:29 AM. Reason: Bedtime

May 14, 2012, 01:58 PM	#2517
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,664 (9.89/day) Thanks: 2,165 Thanked 5,382 Times in 3,729 Posts System Specs	Ok have a huge request!! CP if you could please post the in the OP I would appreciate it. My wife has flipped out again over my 6 core cruncher being open in our living room on a test bench for the last time. Would anyone PLEASE have a mATX AM2+/AM3 motherboard with onboard video they would trade me for my MSI K9A2 Platinum ATX 790FX board. I am desperate at this point. I may have to pack this cruncher up until I come across one. __________________ Cruncher's: All GPU's GPU's: 7970 3GB = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

May 15, 2012, 01:14 PM	#2519
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,390 (9.87/day) Thanks: 5,631 Thanked 10,667 Times in 3,328 Posts System Specs	I have another AMD rig in progress but I'm in need of a CPU. I will eventually pickup an X4 or X6 AM3 chip for it but in the meantime... Does anyone have an AM2/AM2+/AM3 CPU sitting idle that I can pickup for cheap. It doesn't really matter how many cores or what generation as I can run anything but FX in my crunching rigs (140W support in all of them)... just need something to stick in a rig to keep it crunching PM to discuss if you have something that will work for me. __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's/Radeon 7870 Helping the world one digit at a time...stop by our WCG Team thread and see what we do!**

System Name:	My Fortress/Trish (WCG-1)/Julia (WCG-2)/Junior (WCG-3)/Norton3 (WCG-4)/Lil' Ella (WCG-5)/Mr Foldy
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/i7-920/Xeon (6c/12t)
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill 1600/2x4GB Corsair 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/IGP/HD 7870/2xHD 7770's/2x GTX 580's
Hard Disk:	All Western Digital
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/Fractal XL Rev 2
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/X Gold 750
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

May 15, 2012, 01:29 PM	#2523
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,926 (11.78/day) Thanks: 15,179 Thanked 12,324 Times in 7,786 Posts System Specs	Brandon __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

May 15, 2012, 01:44 PM	#2525
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,664 (9.89/day) Thanks: 2,165 Thanked 5,382 Times in 3,729 Posts System Specs	Chip will be in the mail tomorrow Push it to the max! I had one of these OCed to like 3ghz+ if its the one I remember having. They have been on my desk for atleast 5 months collecting dust. __________________ Cruncher's: All GPU's GPU's: 7970 3GB = 8 Threads 5770 1GB OCed = 2 Threads

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cruncher Parts for Crunchers	CyberDruid	World Community Grid (WCG)	110	May 22, 2009 06:55 AM
PSU's For Crunchers ??	oily_17	World Community Grid (WCG)	20	May 4, 2009 08:22 PM
is this ram helping or not?	quasar923	Motherboards & Memory	26	Feb 5, 2008 11:11 PM
Crunchers Corner	vaiopup	techPowerUp! Club Forum	2	Feb 3, 2008 05:26 PM
helping a friend	KennyT772	Graphics Cards	5	Feb 15, 2006 11:47 PM