OCCT 4.x.x

[stasio]

OCCT 4.2.0 Final

http://www.ocbase.com/download/OCCTPT4.2.0.exe
http://www.ocbase.com/download/OCCTPT4.2.0.zip

BugFixes :
The Idle period boxes (among others) should now stay disabled after an infinite test
Test processes should now end all the time when the main GUI is closed during a test
Avoided a rare case where a test would be reported as "in error" and immediatly reported as "testing", even if stopped (the error and graphs were correctly generated though). The status label was updated one extra time. Occured very rarely.

[pokazene_maslo]

Originally Posted by pokazene_maslo

the dx10 gpu test is crashing "devilmaycry4_dx10.exe has topped working"
OCCT 4.1.1 Final, HD6970, catalyst 12.1

And the same goes with catalyst 12.2 and OCCT 4.2.0

[LAN_deRf_HA]

I've been wondering does the new gpu test still get throttled by new cards or is it so different the throttling features don't recognize it as OCCT anymore?

[xerkon]

Hi. I love OCCT but the latest version (4.2.0) seems to be missing my GPU temp. I know it's been there in previous versions. Since OCCT is using the built in HWMonitor I installed HWMonitor to see if it was there and it is. Am I missing something? Thanks!

(I should add the above problem is under Win 7. I just checked on XP and not only does it show my GPU temp, it shows 2 temps, GPU and GPU(core0), same temp and I only have a single core GPU. I should also add that I have a Radeon HD6950)

[pokazene_maslo]

xerkon: is dx10 gpu test working for you? for me it's crashing.

[xerkon]

Originally Posted by pokazene_maslo

xerkon: is dx10 gpu test working for you? for me it's crashing.

Yeah, all I've been running in Windows 7 is dx10, and I've tested for probably a couple hundred hours and I haven't had any problems with it crashing (I'm running gpu + prime95 to test overclock settings). The only thing that I've noticed that's weird is, like I said, I don't have any temperature read out in Windows 7 -- hmmm...that makes me wonder...I switched over to dx9 to see if I would have a temperature reading (since I do in XP and it's always running dx9 of course) but, no, still no temp.

[stasio]

OCCT 4.2.1 Beta 1

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b01.zip

Initial Windows 8 support
Memory usage graph merged with the CPU usage graph - expressed in % in real time graph, in MB otherwise
Introduced Real-time monitoring of frequencies
Added GPU frequency support (not universal though - Intel GPU should not be that well supported, as newest Nvidia GPUs unfortunatly)
Added all that into system information - design is temporary, i will probably tab it to make it smaller ( one CPU/MOBO tab, one GPU tab)

[pokazene_maslo]

So it was indeed bug in OCCT. With OCCT 4.2.1 Beta 1 DX10 test is not crashing anymore. 10 hours of testing without a single error.

[Arctucas]

For my system;

Version 4.2.1 BETA 1 reports incorrect bus speed.

Version 4.2.0 and previous versions report correct bus speed.

This is the same issue I have with CPU-Z 1.6.1.

[stasio]

OCCT 4.2.1 Beta 2

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b02.zip

Added tabs to system information
No "not valid" Will APPEAR frequency anymore
Various bugfixes around information system

[Arctucas]

System bus speed incorrect, again.

[stasio]

OCCT 4.2.1 Beta 3

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b03.zip

Added the FPS limit function (0 is disabled, Any Other value is Enabled)
Had to reprogram the FPS counter in GPU: 3D. Not perfect, HAS 1s and 2s Between drop for a reason i do not know why yet. Otherwise works fine.
Moved the title panel to the left for space restrictions.

[Arctucas]

Same...

[stasio]

OCCT 4.2.1 Beta 4

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b04.zip

The FPS limit is now working much, much better.

[Arctucas]

Not fixed yet...

[stasio]

OCCT 4.2.1 Beta 5

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b05.zip

Added Chinese (Traditional), German and Spanish translations
The GPU: 3D and Power Supply will never Be tabs greyed out again. Will check the OCCT test upon startup if DirectX is OK, and if not, propose you to update it using Microsoft-based install. Once it is done, It Will start the test.
Added a suffix to the output graphs showing what They Are. "Temperature", "Voltages", and so on.
Added frequency graphs
Removed not usable Frequencies (like NaN, + infinity, and so on) from being detected and showed

[stasio]

OCCT 4.2.1 Beta 6

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b06.zip

Added new 32 and 64-bit CPU: OCCT test. Both supports MOST set statement up to (and Including) AVX. The old one is still included - compare them all!
Fixed a bug in option Where the CPU: OCCT Would not reactivate Correctly After an error WAS found
The GPU tab will not APPEAR In The system info INSTEAD of Being greyed out.

[stasio]

OCCT 4.2.1 Beta 7

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b07.zip

Added a new plugin made by bjone AIDA64 - Thanks!
Fixed a bug Which would because an error When Generating graphs if the sensor has included a name /
Removed CPU: OCCT's old test as it is less efficient Than the new one
Fixed tooltips

[stasio]

OCCT 4.2.1 Beta 8

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b08.zip

The 32-bit option in CPU: OCCT Will Be When You are checked using a 32 bit OS
Fixed a bug Where Some plugin Was not reflected in the configuration options
Properly encoded "BaseForTranslatingOCCT.exe". Silly me.
Updated translation files - ready for update!

[stasio]

OCCT 4.2.1 Beta 9

http://www.ocbase.com/OpenBeta/OCCTPT4.2.1.b09.zip

Updated translation, along with a few fixes to Some missing strings in it.

[stasio]

OCCT 4.3.0 Final

http://www.ocbase.com/download/OCCTPT4.3.0.exe
http://www.ocbase.com/download/OCCTPT4.3.0.zip

MAIN
Windows 8 Support
Several bugfixes to the main UI (Checkboxes not disabling properly, Error when generating graphs that contained a / in their name...)

CPU:OCCT
Revamped CPU:OCCT, now in both 32 and 64 bits mode, supporting all instruction sets up to AVX. It is the biggest change to CPU:OCCT since 3.0.0

GPU:3D
Added a software FPS Limiter to the test
OCCT will now try to update DirectX from the GUI instead of bluntly disabling the GPU:3D and POWER SUPPLY tabs. It relies on Microsoft's DirectX Web installer.

MONITORING
Engine updated
Real-time frequency monitoring for CPU, GPU,...
Added System information for GPU, if applicable. The range of GPU supported is very thin right now, but it will improve over time.
Merged the CPU Frequency and Memory Used graphs
The Memory Usage is now shown in % in the graph
BJone and Gein rewrote the Aida64 plugin, much more reliable and efficient, and now supports FAN Monitoring ! Don't forget to enable shared memory in Aida64's preferences !
Changed the way graphs are named to have a better organization of the OCCT Graph dir.

TRANSLATIONS
OCCT now supports Chinese, Dutch, English, French, German, Japanese, Polish, Romanian, Russian, and Spanish languages.

[Arctucas]

Still broken, has not reported correct bus speed since 4.2.0.

[stasio]

Originally Posted by Arctucas

Still broken, has not reported correct bus speed since 4.2.0.

Bugs report here:
http://forum.hardware.fr/hfr/Overclo...227556_819.htm

[stasio]

OCCT 4.3.1 Final

http://www.ocbase.com/download/OCCTPT4.3.1.exe
http://www.ocbase.com/download/OCCTPT4.3.1.zip

Removed an unwanted dependency to Visual C++ 2010

[Arctucas]

Originally Posted by stasio

Bugs report here:
http://forum.hardware.fr/hfr/Overclo...227556_819.htm

Je ne parle...

Is there an English sub-forum?