HyperSLI (Enabling SLI on non-sli motherboards)

[gregkwaste]

Hi there guys, thanks you for your awesome job in HyperSli.
I wanted to ask some questions about the whole setup:

First of all i have an asus p5k mobo (p35 chipset) and already 1 evga gtx 260 gpu. Day to day i am waiting for another gtx 260 i ordered in order to try an sli setup in my non sli mobo (btw it has crossfire support).

So 2 questions:
1) Is there any possibility to harm the mobo?
2)Recently i updated to 301.42 nvidia drivers, do i have to necessary install the modded ones?

Oh and another one, i read somewhere that there is a problem with avast antivirus, to i need to remove it?

Edit:
And one more
I also read that in sli mobos it may not be necessary to bridge the cards. I personally still haven't got the sli bridge yet. Is it necesssary for the setup? or can i make the setup without one? Eventually i will get one in a few days...

I have to prepare myself xD

[anatolymik]

Hi friends. Too sory but for some time i can't support this thread full time.

[twobombs]

Tnx! ( and yes, HyperV also works on Server 2012 [ v0.9 and the 302.82 WHQL windows 8 drivers ] ) There are some things I found out and can sum them up ( dualsocket G34 motherboard )
- when working on a motherboard with two chipsets you need to place at least one card on the main chipset PCI-lanes. The rest of the cards are/can be placed on the other side of the fence.



Motherboard is http://www.supermicro.com/Aplus/moth...x0/H8DG6-F.cfm dual Opteron G34.

[RiC@RDOC]

Originally Posted by razaice

I'm having a strange issue that I think is related to the new 0.9 hypersli. Everything works great except when I shut down my computer. Half the time it shuts down correctly, but every other time it acts as if I've restarted it rather than shut it down. It's not really a problem for me, but I just thought I'd report it as an issue.

From the release notes of the new 304.79 beta driver:

Key Fixes
Fixed a compatibility issue with Civilization V and GeForce 400/500 series GPUs
Fixed instances of flickering or missing mouse cursor when hardware cursor is enabled (reported with Aion, World of Warcraft, Eve Online and others).
Fixed instances of very low frame rates in Deus Ex: Human Revolution (DX11).
Fixed an issue that caused a PC reboot instead of a PC shut down.
Fixed an issue that led to a black screen after driver installation.
Power management mode settings now persist across driver overinstalls.

[oxy93n]

Hi again My last post is long time ago all worked fine with 301.24 Driver

then new driver came out (301.42) and i had problems all time with sli and 3D at Diablo3 and i switched back to older once becouse i thinked its a Driver problem and read at forums that a lot of people have this problems.

Today new Beta driver came out 304.79 and hoped all will be fixed but same problems.Then i realized that i using HyperSLI (all worked fine so i forgot it that i use it) and then i came back and see a new Version is Out.

Update---->> Bam all works again with latest Drivers. xD


U Guys are Awesome!!!!!!!!!!!!!!!!!!!

Thx again for this great Work

[razaice]

Originally Posted by RiC@RDOC

From the release notes of the new 304.79 beta driver:

Haha, how strange that they could make a huge mistake like that. Thanks for the information.

[anatolymik]

HyperSLI 0.9 updated. fixed some bugs. redownload the link

[federicoz45]

Originally Posted by gregkwaste

Hi there guys, thanks you for your awesome job in HyperSli.
I wanted to ask some questions about the whole setup:

First of all i have an asus p5k mobo (p35 chipset) and already 1 evga gtx 260 gpu. Day to day i am waiting for another gtx 260 i ordered in order to try an sli setup in my non sli mobo (btw it has crossfire support).

So 2 questions:
1) Is there any possibility to harm the mobo?
2)Recently i updated to 301.42 nvidia drivers, do i have to necessary install the modded ones?

Oh and another one, i read somewhere that there is a problem with avast antivirus, to i need to remove it?

Edit:
And one more
I also read that in sli mobos it may not be necessary to bridge the cards. I personally still haven't got the sli bridge yet. Is it necesssary for the setup? or can i make the setup without one? Eventually i will get one in a few days...

I have to prepare myself xD

Hi, install the second card with the bridge.
Install hypersli. Reboot.
There are no more modded drivers, just install the official latest
drivers. Enable virtualization of course.

[gregkwaste]

Originally Posted by federicoz45

Hi, install the second card with the bridge.
Install hypersli. Reboot.
There are no more modded drivers, just install the official latest
drivers. Enable virtualization of course.

Thanks for your answer man, thats where i ended too after a bit of searching and reading.

So you insist that i must have the bridge huh? I just ordered it today, it'll be here in 10 days or more. Till then shouldn't i install hypersli?

[oxy93n]

Sli without Bridge wont work. It does a longe time but i think they integrate anything in the driver that require a Bridge for SLI.

[federicoz45]

Originally Posted by gregkwaste

Thanks for your answer man, thats where i ended too after a bit of searching and reading.

So you insist that i must have the bridge huh? I just ordered it today, it'll be here in 10 days or more. Till then shouldn't i install hypersli?

Well you could Sli the cards even without the bridge, essentially the pci lanes do the most.
The bridge makes the communication between the two faster.
Try to run them without the bridge, or at least in the control panel the sli don't show up....

[federicoz45]

Hi, I confirm that new beta drivers 304.79 are working fine with latest 0.9 on my machine.

[naber31]

Just came by to say hi, today i'll install vista as subsystem and try to get it work again, wish me luck

Edit: My mobo (once saw the second gpu for an hour) now completely rejects dual gpu attempts... Weird as hell... Wish i could find someone that has the same mobo as me... (Sapphire 790gx crossfire)

[federicoz45]

Originally Posted by naber31

Just came by to say hi, today i'll install vista as subsystem and try to get it work again, wish me luck

Edit: My mobo (once saw the second gpu for an hour) now completely rejects dual gpu attempts... Weird as hell... Wish i could find someone that has the same mobo as me... (Sapphire 790gx crossfire)

Could you post your PSU model and wattage power.
I see on your motherboard there are two additional power connectors, a 8 pin near the voltage regulators and a molex 4 pin just above the pci-e.
Are them powered?

[FabioMC]

I'm really dissapointed. I still can't use any 300.xx driver (gives error 43 in one of my vga's). I have to stick with 290.xx or < . Works fine in my setup (2x 560ti + crosshair IV + hyperSLI). Tried almost everything (clean install, clean drivers, changing pci-ex, etc). Any ideas ? Thks.

[federicoz45]

Originally Posted by FabioMC

I'm really dissapointed. I still can't use any 300.xx driver (gives error 43 in one of my vga's). I have to stick with 290.xx or < . Works fine in my setup (2x 560ti + crosshair IV + hyperSLI). Tried almost everything (clean install, clean drivers, changing pci-ex, etc). Any ideas ? Thks.

Hi there, is not easy tell a solution with few info,
especially with the terrific error 43.
Your boot in hypersli is fine? Virtualization is enabled?
Do you see sli option in Nvidia CP with 300.xx drivers?
Your card are in slot 1-2 or 1-3?
Have you tried to swap monitor cable to another port?
Obviously is not a hypersli trouble but i think when you have this error
you could try to clean all nvidia drivers with driver sweeper after uninstall,
then install the latest beta driver. After this if the error appears, go in safe mode
and perform a manual install of the driver (have disk...) on the issued card.
Tell us if something happens...

[FabioMC]

Originally Posted by federicoz45

Hi there, is not easy tell a solution with few info,
especially with the terrific error 43.
Your boot in hypersli is fine? Virtualization is enabled?
Do you see sli option in Nvidia CP with 300.xx drivers?
Your card are in slot 1-2 or 1-3?
Have you tried to swap monitor cable to another port?
Obviously is not a hypersli trouble but i think when you have this error
you could try to clean all nvidia drivers with driver sweeper after uninstall,
then install the latest beta driver. After this if the error appears, go in safe mode
and perform a manual install of the driver (have disk...) on the issued card.
Tell us if something happens...

Yes. Yes. Yes. Slots 1-3. Yes, Tried swapping cable. Already tried driver sweeper. I'm gonna try the manual driver install in safe mode. Tks.

[Serious Ben]

Hello and Greetings from Germany

Anatolymik, thank you for this great program !
Unfortunely it doesn't seem to work with Quadro FX Cards because the SLI Option doesn't show up in the NVIDIA Control Panel

My Setup is following:

HP Workstation xw8400 with an Intel Greencreek 5000x Chipset
and two Quadro FX 3500 Cards. Both have the same video bios 5.71.22.57.06 and the SLI Bridge is connected. Windows 7 x64 SP1 fully patched

HyperSLI 0.9 ist installed and works properly in Hardware Mode (Virtualization is enabled of course)
Latest NVIDIA Driver 296.88 is installed, but tried also a lot older one.

Can you tell me if HyperSLI also works with Quadro Cards or is it designed only to work with GeForce cards ?

Kind regards
Serious Ben

[Sukram]

/*german on*/

Hay,

soviel ich gelesen habe, müsste es auch mit den Quadros funktionieren. Lies mal in diesem Monsterthread nach, da haben es anscheinend schon ein paar probiert

Hast du die Virtualisierung im Mainboard eingeschaltet?

Gruß,

Sukram .. ähm Markus

/*german off*/

[oxy93n]

i dont know it is a problem with Hyper sli or with driver

but i cant use 3D Vision in SLI Mode for Games. It runs well in Powerdvd with 3D movies or in the Nvidia Controll Panel (thers a test for 3D)

but when i start a Game like BF3 or Diablo 3 it ave me an error


When i switch to Vision Surround, 3D works in BF3 on all 3 Monitors and Diablo 3 works too

i never get this problem with 301.42 driver. what do u think its a hypersli problem and nvidia block anything or is it driver problem. use the latest hyper sli and latest driver.

[blacksunrise]

Thanks for the great job of anatolymik and all the guys! But my PC has a weird problem:
After I stop UAC and reboot and push the button "install" and reboot, then BSOD comes as the following before "windows 7 is starting" page shows:
A problem has detected and windows has been shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,restart your computer.If this screen,restart your computer.If this screen appears again,follow these steps:
Check to make sure any new harware or software is properly installed.If this is new installation,ask your hardware or manufactuer forany windows updates you might need.
If problems continue,disable or remove any newly installed hardware or sotware.Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode.
Technical information:
***STOP:0x00000050(0xffaffff8,0x00000000,0x8054851 a,0x00000000)

My PC's situation:
CPU: Core 2 Duo E8600 3.3GHz (works on 4.27GHz)
RAM: CORSAIR DDR3 1600MHz 2GB×2 (CMX4GX3M2A1600C9, work on 1700MHz)
mobo: ASUS P5E3 (X38 and ICH9R chipset)
RAID0: WD3200AAJS 320GB×6
Display Card: GALAXY GTS250×2 (512MB/256bit, 738MHz/2200MHz/1836MHz, 301.42)
HyperSLI: updated 0.9 & 0.81
System: Windows 7 ultimate 32bit
When I don't use HyperSLI and use only one display card, the mobo can recognize 2 GTS250 cards, and the PC works well, but I tried newest HyperSLI 0.9 and then 0.81, my PC gives the same BSOD. Between the two tries, I reinstalled my system
Guys, what's wrong with my PC? Thank you very much!

[Mykee36]

My PC's situation:
CPU: I-7 2600K
RAM: 16GB
mobo: ASROCK P67 Pro3 SE
Display Card: (2) GTX 560 cards
HyperSLI: tried using updated 0.9 & 0.81
System: Windows 7 Premium 64bit
When I use HyperSLi .8 and Nvidia 301.42 driver the PC and SLI works perfect (flawless SLI preformance), but I tried both the newest HyperSLI 0.9 and then 0.81 with Nvidia 304.79 beta driver (also the 304.48) and midway during bootup the PC goes to blackscreen and continues that way till I cut off the PC using the power button.

I tried letting Nvidia drivers update to install , tried clean installs with driversweep and the complete process to get the drivers to install correctly and it never works. Same issue every time.

When I go back to the 301.42 drivers the PC works perfect again ( even using HyperSli .9). Sli working 100%.
If I install the new Nvidia beta drivers with HyperSLi uninstalled the PC works perfect, no bootup problem. SO i guess a problem with my mobo and the new Nvidia drivers when using HyperSLi?

[anatolymik]

Hi to all of you!

I'm very busy now and can not support this thread for a while.

Thanks.

[Kaldazar]

SLI option does not appear. Motherboard - Asus M4A89GTD PRO. Videocards - GeForce GTX 550 Ti. Latest HyperSLI, latest drivers. Win 7 x64.

HyperSLI installs and starts without problems.

Tried installing, uninstalling, older drivers, nothing works for now.

I understand the authors are busy, but maybe anyone has any clues.

[Mordecai Walfish]

Originally Posted by Kaldazar

SLI option does not appear. Motherboard - Asus M4A89GTD PRO. Videocards - GeForce GTX 550 Ti. Latest HyperSLI, latest drivers. Win 7 x64.

HyperSLI installs and starts without problems.

Tried installing, uninstalling, older drivers, nothing works for now.

I understand the authors are busy, but maybe anyone has any clues.

Be sure virtualization is enabled in your bios and also try the method without virtualization (through hyperSLI control panel taskbar thingie).

Also try older 296.10 drivers (clean install) and hyperSLI 0.7 to see if that works. Be sure you have a SLI bridge installed as well.

also read nvidia's driver release notes to see any particular issues with your hardware/os that are known. They have a pretty well maintained list in their driver release notes.

good luck!