Second CPU socket not working?

Morgoth · Jul 4, 2012, 07:08 PM

i just got my Second E5520 Xeon cpu puted in my second cpu socket and the entire system wont boot or go to bios screen all i get is fiew power leds going on and nothing more no spinning fans, no debug codes
what must i do ?

and yes i tested my second cpu in my first socket works fine

erocker · Jul 4, 2012, 07:12 PM

Reset the CMOS? You didn't mention it.

Morgoth · Jul 4, 2012, 07:13 PM

ah yes i did that to, or sould i just pul out the batery it self?

CaptainFailcon · Jul 4, 2012, 07:20 PM

bentpins ? maby you need to reconfigure the bios for both cpus ?

Morgoth · Jul 4, 2012, 08:18 PM

i found the problem it was some 6x pin connectors for overlocking that made it buged
now it boots up but my pc is ver yslow its like my cpu is rendering every thing

CaptainFailcon · Jul 4, 2012, 08:20 PM

voltages and mulis set properly ? make sure you are using the CPU power connectors and not PCIe's ones ..

lyndonguitar · Jul 4, 2012, 08:22 PM

did you try testing your 1st cpu on the 2nd socket.

the 2nd socket might be busted

CaptainFailcon · Jul 4, 2012, 08:22 PM

Quote:

Originally Posted by lyndonguitar

did you try testing your 1st cpu on the 2nd socket.

the 2nd socket might be busted

did you even read the Ops initial post ?

Morgoth · Jul 4, 2012, 08:35 PM

multi is at 17x core volt is at 0.950-1.050
both cpu's got 8x power conecter pluged in

CaptainFailcon · Jul 4, 2012, 08:41 PM

try a bios update

Darkleoco · Jul 4, 2012, 08:41 PM

Quote:

Originally Posted by CaptainFailcon

did you even read the Ops initial post ?

The question is did YOU? The OP stated that he tried his second cpu in the first socket and it was fine however he said nothing about testing the first cpu in the second socket. You should try reading fully before jumping down someones throat.

Morgoth · Jul 4, 2012, 08:43 PM

i cant single boot only on my second socket

CaptainFailcon · Jul 4, 2012, 08:44 PM

Quote:

Originally Posted by Darkleoco

The question is did YOU? The OP stated that he tried his second cpu in the first socket and it was fine however he said nothing about testing the first cpu in the second socket. You should try reading fully before jumping down someones throat.

try knowing what you are talking about before speaking
if Cpu B works in socket A and AND Works in Socket B then there is no fault if there was it would not even post a failed socket would not cause the issues's he replied with it either works or it doesn't there is no in-between
and I doubt you can even boot on just the secondary socket because one cpu has to be the MASTER

Morgoth · Jul 4, 2012, 08:48 PM

can anny one help me find this bios update? this damn machine is slow even at 16 threads..

CaptainFailcon · Jul 4, 2012, 08:50 PM

Quote:

Originally Posted by Morgoth

can anny one help me find this bios update? this damn machine is slow even at 16 threads..

need the exact model of the board I already found the bios updates for you just need to know what one to link

I believe this one will work for the A1 stepping of that board
http://www.evga.com/support/download...er=270-WS-W555

Make sure you use safe flashing procedure or you risk bricking it

Morgoth · Jul 5, 2012, 06:59 AM

i updated the bios im still getting this slow effect

CaptainFailcon · Jul 5, 2012, 07:00 AM

"Slow effect" does not tell us much about the problem
is the task manger reporting high cpu load ?

Morgoth · Jul 5, 2012, 10:23 AM

no but all cores being used arround 20% mainly

FordGT90Concept · Jul 5, 2012, 11:05 AM

What process is loading them?

Morgoth · Jul 5, 2012, 12:43 PM

ill post a screenshot of task manager once i get home from work

Morgoth · Jul 5, 2012, 05:44 PM

it seems to freeze allot in windows 7 i am using now safe mode with network support
it stil is slow but it doest show anny high cpu usage
now its just using les then 4-12%
like steam, task manager, chrome, csrss

FordGT90Concept · Jul 5, 2012, 05:53 PM

In device manager, it shows the CPU has Multiprocessor ACPI device, correct? If I were in your shoes, I would try to reinstall the chipset drivers.

Morgoth · Jul 5, 2012, 06:36 PM

i got this message on many devices
This device can not start because its configuration information in the registry is incomplete or damaged code 19

CaptainFailcon · Jul 5, 2012, 06:37 PM

best option would be to clean install windows
unless you know how to use sysprep or manually remove devices that are needed to boot

Morgoth · Jul 5, 2012, 06:40 PM

tell me, i could boot into a linux os and repair windows?

Jul 4, 2012, 07:08 PM	#1
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	Second CPU socket not working? i just got my Second E5520 Xeon cpu puted in my second cpu socket and the entire system wont boot or go to bios screen all i get is fiew power leds going on and nothing more no spinning fans, no debug codes what must i do ? and yes i tested my second cpu in my first socket works fine __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/ Last edited by Morgoth; Jul 4, 2012 at 07:11 PM. Reason: typo

System Name:	Skynet
Processor:	Intel Xeon E5520 Intel Xeon E5520 @ stock
Motherboard:	Evga W555 sr-2
Cooling:	2xCPu on water (3 rads 120x120) Swiftech 655 pump, gpu, ram on air
Memory:	24gb ram 1066mhz
Video Card:	amd/ati HD5970
Hard Disk:	2x Seagate Barracuda 7200.11 500GB 32MB Cache SATA2 3gb ramdisk
Optical Drive:	none
CRT/LCD Model:	Samsung 206bw 20inch 16:10
Case:	techbench custom
Sound Card:	Onboard
PSU:	Corsair Powersupply CMPSU-1000HXEU 1000W, Modular
Software:	Windows 7 ultimate 64bit
Benchmarks:	3dmark 2011 P6976 Wprime 32m 6,203 VBCT 10mb final compile 00:02:13

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Jul 4, 2012, 07:13 PM	#3
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	ah yes i did that to, or sould i just pul out the batery it self? __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

System Name:	Skynet
Processor:	Intel Xeon E5520 Intel Xeon E5520 @ stock
Motherboard:	Evga W555 sr-2
Cooling:	2xCPu on water (3 rads 120x120) Swiftech 655 pump, gpu, ram on air
Memory:	24gb ram 1066mhz
Video Card:	amd/ati HD5970
Hard Disk:	2x Seagate Barracuda 7200.11 500GB 32MB Cache SATA2 3gb ramdisk
Optical Drive:	none
CRT/LCD Model:	Samsung 206bw 20inch 16:10
Case:	techbench custom
Sound Card:	Onboard
PSU:	Corsair Powersupply CMPSU-1000HXEU 1000W, Modular
Software:	Windows 7 ultimate 64bit
Benchmarks:	3dmark 2011 P6976 Wprime 32m 6,203 VBCT 10mb final compile 00:02:13

Jul 4, 2012, 07:12 PM	#2
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,944 (12.77/day) Thanks: 2,793 Thanked 12,310 Times in 7,827 Posts System Specs	Reset the CMOS? You didn't mention it.

Jul 4, 2012, 07:20 PM	#4
CaptainFailcon Banned Join Date: Apr 2012 Posts: 193 (0.49/day) Thanks: 12 Thanked 41 Times in 38 Posts	bentpins ? maby you need to reconfigure the bios for both cpus ?

System Name:	Evilbob
Processor:	Intel 3750k
Motherboard:	ASRock Z77 Extreme4
Cooling:	Hyper 212+ Custom
Memory:	8GB Samsung 22NM @ 2000Mhz 10-9-10-11
Video Card:	Geforce GTX 560448
Hard Disk:	x1 SSD
Optical Drive:	n/a
CRT/LCD Model:	22inch
Case:	NZXT gamma
Sound Card:	onboard
PSU:	Antec 650c
Software:	Windows 7 X64

Jul 4, 2012, 08:18 PM	#5
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	i found the problem it was some 6x pin connectors for overlocking that made it buged now it boots up but my pc is ver yslow its like my cpu is rendering every thing __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 4, 2012, 08:20 PM	#6
CaptainFailcon Banned Join Date: Apr 2012 Posts: 193 (0.49/day) Thanks: 12 Thanked 41 Times in 38 Posts	voltages and mulis set properly ? make sure you are using the CPU power connectors and not PCIe's ones ..

Jul 4, 2012, 08:22 PM	#7
lyndonguitar I play games Join Date: Apr 2010 Location: Philippines Posts: 1,254 (1.09/day) Thanks: 264 Thanked 262 Times in 182 Posts System Specs	did you try testing your 1st cpu on the 2nd socket. the 2nd socket might be busted __________________ Steam - lyndonguitar Origin - lyndonguitar Battlefield 3 Profile Battle.net - lyndonguitar#1663 Diablo III Profile Guild Wars 2 - lyndonguitar.6947

System Name:	Xtreme-III \| Legendary \| Supernova
Processor:	Intel Core i7-2600K @ 4.5 GHz \| AMD Phenom II X4 955 @ 3.2ghz \| Intel Core i3-2100 @ 3.1GHz
Motherboard:	Asus P8P67-M \| Asus M4N68T-M \| ECS H61H2-M2
Cooling:	Corsair H50 \| Stock \| Stock
Memory:	Memory: G.Skill Sniper 8gb (dual) ddr3 1600 \| 6gb ddr3 1333 \| 4gb DDR3-1333
Video Card:	AMD Radeon HD 6870 Toxic Edition \| ATI Radeon HD 5750 1 GB \| Nvidia Geforce GT 430 1 GB
Hard Disk:	500 Gb SATA, 1 TB SATA, 1.5 TB SATA, 2 TB SATA \| 500 Gb SATA \| 500 Gb SATA
Optical Drive:	LG DVD Drive \| LG DVD Drive \| LG DVD Drive
CRT/LCD Model:	32" HDTV + 2 X 19" Monitor \| 19" Monitor \| 19" Monitor
Case:	CM Storm Sniper Mesh Edition \| Powerlogic 2000 \| Intex Supernova
Sound Card:	Onboard \| Onboard \| Onboard
PSU:	ST50F-ES 500W Silverstone Strider Essential \| Epsilon 80Plus 600W \| Generic 500W
Software:	Windows 7 Ultimate \| Windows 7 Ultimate \| Windows 7 Ultimate

Jul 4, 2012, 08:35 PM	#9
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	multi is at 17x core volt is at 0.950-1.050 both cpu's got 8x power conecter pluged in __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 4, 2012, 08:41 PM	#10
CaptainFailcon Banned Join Date: Apr 2012 Posts: 193 (0.49/day) Thanks: 12 Thanked 41 Times in 38 Posts	try a bios update

System Name:	Red Giant
Processor:	Intel Core i7-2600k @ 4.4 Ghz
Motherboard:	Asus P67 Sabertooth
Cooling:	CoolerMaster V6GT
Memory:	Kingston Hyper X DDR3-1600MHz 8 GB
Video Card:	MSI Twin Frozr II 6950 2GB CF
Hard Disk:	2 TB Barracuda Greens
CRT/LCD Model:	23" Acer 1920 x 1080
Case:	CoolerMaster HAF X
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 Home Premium 64-bit

Jul 4, 2012, 08:43 PM	#12
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	i cant single boot only on my second socket __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 4, 2012, 08:48 PM	#14
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	can anny one help me find this bios update? this damn machine is slow even at 16 threads.. __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 06:59 AM	#16
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	i updated the bios im still getting this slow effect __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 07:00 AM	#17
CaptainFailcon Banned Join Date: Apr 2012 Posts: 193 (0.49/day) Thanks: 12 Thanked 41 Times in 38 Posts	"Slow effect" does not tell us much about the problem is the task manger reporting high cpu load ?

Jul 5, 2012, 10:23 AM	#18
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	no but all cores being used arround 20% mainly __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 11:05 AM	#19
FordGT90Concept "I go fast!1!11!1!" Join Date: Oct 2008 Location: IA, USA Posts: 10,583 (6.28/day) Thanks: 1,755 Thanked 2,599 Times in 1,962 Posts System Specs	What process is loading them? __________________ Golden Rule of Programming: Never assume. try { SteamDownload(); } catch (Steamception ex) { RageQuit(); }

System Name:	BY-2009
Processor:	Intel Core i7 920 (4 x 2.66 GHz) w/ HT and Turbo on
Motherboard:	DFI LP DK X58
Cooling:	Sythe MUGEN-2 w/ Stock Fan
Memory:	3 x 2 GiB OCZ Gold DDR3-1600 @ DDR-1066
Video Card:	Sapphire Vapor-X HD 5870 1 GiB
Hard Disk:	2 x Seagate Barracuda 250GB 7200.7 RAID0
Optical Drive:	Samsung 16x DVD-ROM, Pioneer 16x DVD+/-RW
CRT/LCD Model:	Samsung Syncmaster T240 24" LCD (1920x1200)
Case:	Coolermaster HAF 932
Sound Card:	Realtek Onboard, HT OMEGA Striker 7.1
PSU:	Enermax Liberty 620w
Software:	Microsoft Windows 7 Ultimate x64
Benchmarks:	Faster than the tortoise; slower than the hare.

Jul 5, 2012, 12:43 PM	#20
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	ill post a screenshot of task manager once i get home from work __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 05:44 PM	#21
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	it seems to freeze allot in windows 7 i am using now safe mode with network support it stil is slow but it doest show anny high cpu usage now its just using les then 4-12% like steam, task manager, chrome, csrss __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 05:53 PM	#22
FordGT90Concept "I go fast!1!11!1!" Join Date: Oct 2008 Location: IA, USA Posts: 10,583 (6.28/day) Thanks: 1,755 Thanked 2,599 Times in 1,962 Posts System Specs	In device manager, it shows the CPU has Multiprocessor ACPI device, correct? If I were in your shoes, I would try to reinstall the chipset drivers. __________________ Golden Rule of Programming: Never assume. try { SteamDownload(); } catch (Steamception ex) { RageQuit(); }

Jul 5, 2012, 06:36 PM	#23
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	i got this message on many devices This device can not start because its configuration information in the registry is incomplete or damaged code 19 __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Jul 5, 2012, 06:37 PM	#24
CaptainFailcon Banned Join Date: Apr 2012 Posts: 193 (0.49/day) Thanks: 12 Thanked 41 Times in 38 Posts	best option would be to clean install windows unless you know how to use sysprep or manually remove devices that are needed to boot

Jul 5, 2012, 06:40 PM	#25
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,651 (1.25/day) Thanks: 80 Thanked 222 Times in 161 Posts System Specs	tell me, i could boot into a linux os and repair windows? __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6970 and second monitor, not working!	JJJackson	AMD / ATI	5	Jul 17, 2011 06:36 PM
Second video card not detected?	ebolamonkey3	NVIDIA	3	Dec 2, 2010 12:55 AM
What is causing my cpu usage to spike in 6 second intervals?	JayliN	General Hardware	4	Sep 6, 2009 05:59 AM
Outback Online - if Second Life is not enough	Bastieeeh	News	4	Feb 28, 2007 07:27 PM
A8N-SLI Second card not detected	Hotpot	Motherboards & Memory	7	Feb 11, 2006 07:46 AM