Intel Core i5 & i7 Sandy Bridge Overclocking and Feedback - Page 38

Ozpa · Dec 21, 2011, 02:20 PM

I can't see any numbers :/

Grnfinger · Dec 21, 2011, 02:48 PM

grr darn resize, I''ll fix the screens

Ozpa · Dec 21, 2011, 09:11 PM

Ok I've just started OCing my 2500K. I've only been running 4,5Ghz for over 2 hours in OCCT + playing League of Legends while I'm at it

My motherboad BIOS has quite different OC options than Extreme3/4 I've seen people post screenshots of. I can only change vcore in 0.05 increments :/
AIDA64 reporting vcore 1.312-1.328, CPU temp is 41-42c (surprisingly low I feel, but I love my Antec 1200 and it's winter outside).
What's the most popular CPU benchmark I could use to compare scores with other oced 2500K CPUs? I want to make sure my CPU isn't being throttled or anything.

brandonwh64 · May 31, 2012, 01:00 AM

Ok fella's I need some help. I am ocing to 4.5ghz but when I set the voltage from auto to a specific number, the voltage does not down volt at idle with the clocks? Is there something special I have to do to make the voltage go down?

DOM · May 31, 2012, 01:07 AM

Quote:

Originally Posted by brandonwh64

Ok fella's I need some help. I am ocing to 4.5ghz but when I set the voltage from auto to a specific number, the voltage does not down volt at idle with the clocks? Is there something special I have to do to make the voltage go down?

i belive you have to use the off set setting for it to drop when speedstep down clocks it

brandonwh64 · May 31, 2012, 01:32 AM

Quote:

Originally Posted by DOM

i belive you have to use the off set setting for it to drop when speedstep down clocks it

I will test this out but how do I know what offset if the specific voltage I am looking for?

theJesus · May 31, 2012, 07:46 PM

I could never get that offset thing to work right. It was always either too high under load or too low at idle. I just said eff it and I'm doing it the old-fashioned way.

james888 · Jul 3, 2012, 02:14 AM

I have had trouble overclocking my i5-2500k in the past. The best I could do was 4.4ghz. I am trying again. My goal is 4.7ghz. My motherboard is the msi-p67-gd53.

My current settings are:

There is a typo on the ram voltages. Just add .1v to the ram voltages and that is what they are. As I show in the picture, current vs actual, my motherboard rounds down some settings. I am pretty sure some of those voltages are a bit high. I was getting these two bsod codes and I kept adding more vcore.

0x124
0x9C

I went 15 hours with occt linpack test with the above settings. The did the occt lin with avx and it failed in 5 minutes and had the error 0x101.

Any help would be appreciated.

Millennium · Jul 3, 2012, 09:19 AM

My 2500k only does 4.5. You may just have a dud one like me.

4.5 is something like +0.15 vcore, etc etc, on p67. Should be doable for 99%.

white phantom · Jul 3, 2012, 09:38 AM

Quote:

Originally Posted by Millennium

My 2500k only does 4.5. You may just have a dud one like me.

4.5 is something like +0.15 vcore, etc etc, on p67. Should be doable for 99%.

mines needs +30

and even then sometimes it will lock up rarely

, motherboards just a piece of shit

Arrakis+9 · Jul 12, 2012, 07:50 PM

once my 2 new agilty 3 drives are in im going to be pushing for my 4.8ghz goal, im almost there actually but managed to have a drive failure in the middle of my adventure so i sent both of my Vertex 2's back to OCZ to have them replaced with faster drives

I'll post my bios settings soon of were im at currently

blackriver · Jul 27, 2012, 12:08 PM

hello

brandonwh64 · Jul 27, 2012, 01:06 PM

Quote:

Originally Posted by blackriver

hello

hello?

james888 · Jul 27, 2012, 03:49 PM

Quote:

Originally Posted by blackriver

hello

Quote:

Originally Posted by brandonwh64

hello?

?

gopal · Jul 27, 2012, 05:57 PM

Quote:

Originally Posted by blackriver

hello

Quote:

Originally Posted by brandonwh64

hello?

Quote:

Originally Posted by james888

http://images.fanpop.com/images/imag...04_800_600.jpg?

hello?
Looks like you are new to TPU.
btw, Looks like james like is dead

gopal · Jul 27, 2012, 06:23 PM

Quote:

Originally Posted by Ozpa

Ok I've just started OCing my 2500K. I've only been running 4,5Ghz for over 2 hours in OCCT + playing League of Legends while I'm at it

My motherboad BIOS has quite different OC options than Extreme3/4 I've seen people post screenshots of. I can only change vcore in 0.05 increments :/
AIDA64 reporting vcore 1.312-1.328, CPU temp is 41-42c (surprisingly low I feel, but I love my Antec 1200 and it's winter outside).
What's the most popular CPU benchmark I could use to compare scores with other oced 2500K CPUs? I want to make sure my CPU isn't being throttled or anything.

http://img190.imageshack.us/img190/9699/captureyzoq.jpg

http://img804.imageshack.us/img804/6818/img7299b.jpg

Does that info is on your keyboard?
Which keyboard do you have?

james888 · Jul 28, 2012, 05:05 AM

Quote:

Originally Posted by gopal

btw, Looks like james like is dead

...what? uh... do you mean link. I see the picture on mine just fine. It is a big picture of hello kitty

gopal · Jul 28, 2012, 06:15 AM

Quote:

Originally Posted by james888

...what? uh... do you mean link. I see the picture on mine just fine. It is a big picture of hello kitty

maybe it is because i have a very slow internet so it is not loading

Processor:	Intel® Core™ i5-2500K (4.6GHz @ 1.28-1.33v)
Motherboard:	ASRock Z68 Pro3 Gen3
Cooling:	Prolimatech Megahalems Rev.C + Blue Vortex 140mm
Memory:	Kingston HyperX Grey Series (2x4GB, DDR3-1600, 9-9-9-27, 1.65v)
Video Card:	Gigabyte GTX 560 OC (GV-N56GOC-1GI)
Hard Disk:	Crucial C300 128GB, Samsung F1 750GB
Optical Drive:	Samsung SE-S084B (external DVD-RW)
CRT/LCD Model:	Asus VS248H
Case:	Antec Twelve Hundred
Sound Card:	Onboard Realtek audio
PSU:	Corsair HX 650W
Software:	Win7 Ultimate (64-bit)

Dec 21, 2011, 02:48 PM	#927
Grnfinger Join Date: Apr 2008 Location: Chained 2 Desk Posts: 395 (0.21/day) Thanks: 110 Thanked 166 Times in 99 Posts System Specs	grr darn resize, I''ll fix the screens __________________ 3DMark06 Vantage

System Name:	WIP
Processor:	i5-3570K
Motherboard:	Asus Maximus V GENE
Cooling:	Custom H20
Memory:	Patriot Viper 8GB @ 1866MHz
Video Card:	Asus Direct CUII 7870 Crossfire 1000/1200
Hard Disk:	Intel 120GB 520 Series SSD # 2x Seagate 1TB Raid0 # 1 WD 2TB EARS
Optical Drive:	Asus
CRT/LCD Model:	3 x 22" Eyefinity
Case:	Cosmos S Custom
Sound Card:	X-FI XtremeGamer
PSU:	Corsair AX 860i
Software:	Win7 64Bit Ultimate

Dec 21, 2011, 09:11 PM	#928
Ozpa Join Date: Apr 2009 Posts: 323 (0.21/day) Thanks: 167 Thanked 12 Times in 12 Posts System Specs	Ok I've just started OCing my 2500K. I've only been running 4,5Ghz for over 2 hours in OCCT + playing League of Legends while I'm at it My motherboad BIOS has quite different OC options than Extreme3/4 I've seen people post screenshots of. I can only change vcore in 0.05 increments :/ AIDA64 reporting vcore 1.312-1.328, CPU temp is 41-42c (surprisingly low I feel, but I love my Antec 1200 and it's winter outside). What's the most popular CPU benchmark I could use to compare scores with other oced 2500K CPUs? I want to make sure my CPU isn't being throttled or anything. Last edited by Ozpa; Dec 21, 2011 at 09:26 PM.

Processor:	Intel® Core™ i5-2500K (4.6GHz @ 1.28-1.33v)
Motherboard:	ASRock Z68 Pro3 Gen3
Cooling:	Prolimatech Megahalems Rev.C + Blue Vortex 140mm
Memory:	Kingston HyperX Grey Series (2x4GB, DDR3-1600, 9-9-9-27, 1.65v)
Video Card:	Gigabyte GTX 560 OC (GV-N56GOC-1GI)
Hard Disk:	Crucial C300 128GB, Samsung F1 750GB
Optical Drive:	Samsung SE-S084B (external DVD-RW)
CRT/LCD Model:	Asus VS248H
Case:	Antec Twelve Hundred
Sound Card:	Onboard Realtek audio
PSU:	Corsair HX 650W
Software:	Win7 Ultimate (64-bit)

Dec 21, 2011, 02:20 PM	#926
Ozpa Join Date: Apr 2009 Posts: 323 (0.21/day) Thanks: 167 Thanked 12 Times in 12 Posts System Specs	I can't see any numbers :/

May 31, 2012, 01:00 AM	#929
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,560 (10.03/day) Thanks: 2,138 Thanked 5,338 Times in 3,695 Posts System Specs	Ok fella's I need some help. I am ocing to 4.5ghz but when I set the voltage from auto to a specific number, the voltage does not down volt at idle with the clocks? Is there something special I have to do to make the voltage go down? __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

System Name:	Daily Rig/Bench Rig
Processor:	Intel i7 3770K/Intel i7 3770K
Motherboard:	ASUS Maximus V GENE/Asrock OC Formula
Cooling:	Water/SS-LN2
Memory:	G.SKILL RipjawsX/Team Xtreem LV-2400
Video Card:	EK Full WB HD7970/To Many XD
CRT/LCD Model:	Asus VE248H 24"/LG 22"
Case:	Danger Den Torture Rack/Table XD
Sound Card:	Onboard/None
PSU:	ENERMAX REVOLUTION85+ 1050W /CORSAIR Professional Series Gold AX1200
Software:	W7 64Bit/XP/W7 64Bit

May 31, 2012, 07:46 PM	#932
theJesus Join Date: Jul 2008 Location: Canton, Ohio Posts: 3,116 (1.77/day) Thanks: 2,301 Thanked 865 Times in 612 Posts System Specs	I could never get that offset thing to work right. It was always either too high under load or too low at idle. I just said eff it and I'm doing it the old-fashioned way. __________________ HEAT “congratulations! you have successfully been inflicted with tpuitis! symptons include: prolonged computer usage, urge to make tpu your homepage, posting at rapid posts-per-day ratios (also known as post whoring), and the urge to waste lots of money on high end computer hardware that you dont need!” -panchoman “Modding to me is something best shared with others.... Kind of like a fine wine, but without the drunk driving arrest and hangovers.” -MKmods “i'm going to punch you in the face now Jesus..” -BumbleBee

System Name:	BEHEMOTH
Processor:	Intel Core i5 2500-K @ 4.6ghz
Motherboard:	ASUS P8Z68-V
Cooling:	Corsair Hydro H100
Memory:	2x4gb Corsair Vengeance DDR3 1600 9-9-9-24 1.5v
Video Card:	EVGA GTX 560 Ti SuperClocked 950/1900/2100 core/shader/mem
Hard Disk:	Hitachi Deskstar 7K3000 2TB (OS/pro) \|\| 2x SAMSUNG EcoGreen F2 1.5TB RAID0 (storage)
Optical Drive:	Sony Optiarc AD-7240S-0B
CRT/LCD Model:	Samsung SyncMaster 2343BWX @2048x1152
Case:	Antec P280
Sound Card:	HRT MusicStreamer II+
PSU:	SeaSonic X650 Gold
Software:	Win7 Ultimate x64

Jul 3, 2012, 02:14 AM	#933
james888 Join Date: Jun 2011 Location: Idaho Posts: 2,257 (3.26/day) Thanks: 443 Thanked 425 Times in 317 Posts System Specs	I have had trouble overclocking my i5-2500k in the past. The best I could do was 4.4ghz. I am trying again. My goal is 4.7ghz. My motherboard is the msi-p67-gd53. My current settings are: There is a typo on the ram voltages. Just add .1v to the ram voltages and that is what they are. As I show in the picture, current vs actual, my motherboard rounds down some settings. I am pretty sure some of those voltages are a bit high. I was getting these two bsod codes and I kept adding more vcore. 0x124 0x9C I went 15 hours with occt linpack test with the above settings. The did the occt lin with avx and it failed in 5 minutes and had the error 0x101. Any help would be appreciated. __________________ My Heat Natural Selection 2 (NS2) - FPS/RTS with depth. Link. Studios and publishers seem to have forgotten that games are supposed to be games, not CG films with playable action scenes. Link.

Processor:	Intel Core i5-2500K @ 4.5GHz
Motherboard:	MSI P67A-GD53
Cooling:	Alphacool Monta 240mm
Memory:	G.SKILL 2GBx4 1600mhz 7-8-7-24-2N
Video Card:	Saphire 7970 OC 1250Mhz/1600Mhz
Hard Disk:	Adata sp900, WD Black 500Gb
CRT/LCD Model:	Vizio VM230XVT 1920x1080
Case:	Corsair 550d
Sound Card:	Auzentech Prelude + jvc rx700
PSU:	COUGAR SX850 850W
Software:	Windows 7 64 Bit
Benchmarks:	8224 firestrike

Jul 3, 2012, 09:19 AM	#934
Millennium Join Date: Jun 2005 Location: London, UK Posts: 405 (0.14/day) Thanks: 289 Thanked 77 Times in 72 Posts System Specs	My 2500k only does 4.5. You may just have a dud one like me. 4.5 is something like +0.15 vcore, etc etc, on p67. Should be doable for 99%. __________________ Heatware (new)

System Name:	this_is_so_leet_it_needs_no_name
Processor:	Intel I5 2500k @ 4.5Ghz
Motherboard:	Asus P8 P67-M Pro
Cooling:	MUX-120 with Dual Fan
Memory:	Samsung Memory DDR3 2133 Overclocked (non LP)
Video Card:	XFX ATI/AMD 5870 1gb @ [tbc]
Hard Disk:	2*2tb Samsung Raid 0 + 64gb Kingston SSD
Optical Drive:	Pioneer dvd-rw
CRT/LCD Model:	BenQ G2420HDBL LED monitor
Case:	Lian Li PC-60 old skool alu case
Sound Card:	Asus Xonar DX/XD PCI-Express (great)
PSU:	Corsair 650 TX
Software:	Win 7 64bit

System Name:	White Phantom
Processor:	i5 2500K @ 4.4ghz = 1.360-1.368 vcore
Motherboard:	asrock p67 pro (not pro3)
Cooling:	prolimatech megahalem with 2x nocuta in push pull (thanks to the 54thvoid) ;) , stock phantom fans
Memory:	8gb pny optima ddr3 1333mhz cas 9... oc'd to 1600mhz 1.56v's
Video Card:	asus 560ti 1gb TOP bf3 edition (stock 900mhz oc)
Hard Disk:	primary seagate 7200rpm 80 gig, secondary maxtor 250gig ,external maxtor 750 gig
Optical Drive:	sony optiarc dvd burner
CRT/LCD Model:	samsung syncmaster p2450 via DVI @1080p 60hz
Case:	White and blue NZXT Phantom (carbon fibred sides/door)
Sound Card:	onboard , philips AMBX pro speakers 80watts rms
PSU:	corsair TX 650 watt
Software:	windows 7 ultimate 64bit service pack 1 64bit
Benchmarks:	world record for most amount of times machine has pissed me off ....

Jul 12, 2012, 07:50 PM	#936
Arrakis+9 Join Date: Aug 2007 Location: San Antonio TX Posts: 1,366 (0.65/day) Thanks: 405 Thanked 449 Times in 300 Posts System Specs	once my 2 new agilty 3 drives are in im going to be pushing for my 4.8ghz goal, im almost there actually but managed to have a drive failure in the middle of my adventure so i sent both of my Vertex 2's back to OCZ to have them replaced with faster drives I'll post my bios settings soon of were im at currently __________________ my heatware 56-0-0 high power server fans for sale

System Name:	Hexy
Processor:	2600K @ 4Ghz
Motherboard:	ASUS Maximus V Gene
Cooling:	Stock Intel
Memory:	8GB Samsung @ 2133 10-11-10-28 1.45v
Video Card:	Custom LC GTX 570
Hard Disk:	60GB Agility 3 & 640GB Samsung (accelerated HDD)
Optical Drive:	Liteon BDrom \| Liteon DVD-RW
CRT/LCD Model:	32" JVC TV
Case:	Lian Li PC-8NB
Sound Card:	Supreme FX III
PSU:	Seasonic x850 Gold
Software:	Windows 7 Ult x64

Jul 27, 2012, 12:08 PM	#937
blackriver Join Date: Jul 2012 Location: GAUTENG Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	hello

System Name:	Riddick
Processor:	Intel i7 2600k OC 4.9mhz
Motherboard:	Gigabyte GA-Z77X-UD5H
Cooling:	Antec H2O 620 kuhler
Memory:	Patriot D2 1600mhz 4x4GB OC 1866mhz
Video Card:	XFX6950 DD CF OC 925mhz & 1450mhz
Hard Disk:	Patriot 240GB SSD; Kingmax 128GB mSATA SSD
Optical Drive:	Sony blu-ray
CRT/LCD Model:	LG IPS235 23" FHD LED X 6
Case:	Antec 600V2
PSU:	Antec High Current Pro 850W
Software:	Windows 7 Ultimate 64bit

System Name:	Oldtimer(Always Crunching)
Processor:	Intel P4 631 @ 3.2 GHz [Stock 3.0 GHz]
Motherboard:	Intel D945GCPE
Memory:	512 MB x2 DDR2 (533MHZ and 366 MHZ)
Hard Disk:	160GB Sata1 7200rpm
Optical Drive:	Samsung DVD+-ROM
CRT/LCD Model:	ViewSonic VA703m
PSU:	Normal 450W PSU
Software:	Windows 7 Ultimate 32bit

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intel Sandy Bridge IGP	drfelip	GPU-Z	4	Jan 3, 2011 05:14 PM
Overclock3D's Intel Sandy Bridge 2600K @5GHz Review and Benchmarks.	CDdude55	General Hardware	9	Jan 3, 2011 07:26 AM
NVIDIA SLI Technology and Intel Sandy Bridge Form the Ultimate Gaming PC	btarunr	News	15	Dec 8, 2010 11:23 PM
[Swedish]New ASUS mobo and Intel Sandy Bridge quick preview @ sweclockers	HalfAHertz	Motherboards & Memory	1	Nov 4, 2010 10:47 PM
Intel Sandy Bridge Quad-Core Processor Tested	btarunr	News	72	Jun 12, 2010 10:02 AM