TPU's WCG/BOINC Team - Page 694

Norton · Jul 29, 2012, 02:01 PM

Installed a Xig Night Hawk on my main rig last night with a pair of 1500 rpm Scythe Kama Flex fans for Push-Pull.
The AS5 still needs to break in but temps are running 5c cooler @ 42C while crunching 100% and with a slight overclock to 3.8Ghz on the FX-8150.

These Night Hawk coolers pull some serious heat off of a cpu but man are they a pain to install

I'm going to go with water cooling next time.

Thanks to theonedub for trading with me for these Scythe fans

best fans I've used so far

ChaoticAtmosphere · Jul 29, 2012, 03:02 PM

Quote:

Originally Posted by stinger608

Well, got the ole 4x4 system running and installing Windows Server 2008 R2 now!!!!

http://i415.photobucket.com/albums/p...4/DSC00736.jpg

http://i415.photobucket.com/albums/p...4/DSC00737.jpg

Some may have known that I have been having a ton of issues with this system now for some time. Ended up being some baaaaaaaaad memory! Some that I actually purchased from a fellow TPU member well over a year ago.

None the less, I will have 16 cores a crunching added to my current 12. Of course it will probably not compete with the i7's I have now, but hell, an extra 16 cores has got to help; right?

Welcome back Stinger!

See guys? I told you he was alright!! (they were all worried about you

)

Quote:

Originally Posted by Norton

Installed a Xig Night Hawk on my main rig last night with a pair of 1500 rpm Scythe Kama Flex fans for Push-Pull.
The AS5 still needs to break in but temps are running 5c cooler @ 42C while crunching 100% and with a slight overclock to 3.8Ghz on the FX-8150.

These Night Hawk coolers pull some serious heat off of a cpu but man are they a pain to install

I'm going to go with water cooling next time.

Thanks to theonedub for trading with me for these Scythe fans

best fans I've used so far

3.8Ghz??? Surely you can get to 4.0 with the 8150 without any voltage increase!

stinger608 · Jul 29, 2012, 03:10 PM

Quote:

Originally Posted by ChaoticAtmosphere

See guys? I told you he was alright!! (they were all worried about you )

Yep, just took some much needed R&R for almost a week.

Well crap, got the 4x4 system up running, all updated, WCG running, and pow! Blew a damn breaker in the house.

Then I remembered that I needed to find a place to put this system other than the computer room.

Now I have it shut down.........Again LOL and trying to find a place that I can run this power hungry monster.

This damn place has the computer room, bedroom, and part of the living room all on one stupid 15 amp breaker.

Trying to convince the wife that I need to put this in the laundry area which runs on a 20 amp. Not going over so well.

gopal · Jul 29, 2012, 04:29 PM

Quote:

Originally Posted by stinger608

Actually it is a Socket F 1207. This system is running 4 quad core Opteron 8250's

WOW

Quote:

Originally Posted by ThE_MaD_ShOt

I am going to be the first one to give a guess on ppd Stinger. I am going to say once it's spooled up ppd will be between 4 and 5k. Thats just a off the wall guess I could be way off.

Exactly

gopal · Jul 29, 2012, 04:40 PM

Quote:

Originally Posted by stinger608

Yep, just took some much needed R&R for almost a week.

Well crap, got the 4x4 system up running, all updated, WCG running, and pow! Blew a damn breaker in the house.

Then I remembered that I needed to find a place to put this system other than the computer room.

Now I have it shut down.........Again LOL and trying to find a place that I can run this power hungry monster.

This damn place has the computer room, bedroom, and part of the living room all on one stupid 15 amp breaker.

Trying to convince the wife that I need to put this in the laundry area which runs on a 20 amp. Not going over so well.

Norton · Jul 29, 2012, 04:56 PM

Quote:

Originally Posted by ChaoticAtmosphere

Welcome back Stinger!

See guys? I told you he was alright!! (they were all worried about you

)

3.8Ghz??? Surely you can get to 4.0 with the 8150 without any voltage increase!

I guess I just get edgy from time to time- had some bad things happen to good people in the recent past. Hope you enjoyed your time off there stinger

I was only running 3.8 because it was running a little to warm for me on the old Dark Knight cooler. I'll be at 4.0 in a few days after the AS5 breaks in a bit more

*Note- the 6200 is crunching 100% at 4.0 while running a steady 38C on the other Night Hawk cooler

gopal · Jul 29, 2012, 05:02 PM

@ Norton; why is your PII 1045T is offline

Norton · Jul 29, 2012, 05:07 PM

Quote:

Originally Posted by gopal

@ Norton; why is your PII 1045T is offline

My mainboard is giving me trouble (90% sure). I'm waiting on a new PSU to make sure it's not that and then I will replace the board. Don't want to kill a new board if the psu killed this one.

Considering trading/selling the 1045T for an FX 6 or 8 core if I do need a new board

gopal · Jul 29, 2012, 05:21 PM

Quote:

Originally Posted by Norton

My mainboard is giving me trouble (90% sure). I'm waiting on a new PSU to make sure it's not that and then I will replace the board. Don't want to kill a new board if the psu killed this one.

Considering trading/selling the 1045T for an FX 6 or 8 core if I do need a new board

Sorry to hear that
EDIT: Is 1500 is a milestone? because i just reached it now

Bow · Jul 29, 2012, 07:42 PM

m&m's · Jul 29, 2012, 08:42 PM

Quote:

Originally Posted by Norton

Considering trading/selling the 1045T for an FX 6 or 8 core if I do need a new board

May I know why? I mean your 1045T is probably faster than any FX. Are FX better than Phenom II at crunching?

Norton · Jul 29, 2012, 08:51 PM

Quote:

Originally Posted by m&m's

May I know why? I mean your 1045T is probably faster than any FX. Are FX better than Phenom II at crunching?

FX's run well for crunching imho

FX 8 cores can run 4-6,000 ppd depending on the speed they are clocked at. FX 6 cores run about 75% of the output of the 8 core.

I'm running 3 FX and the 1045T for crunching- I prefer the FX's ... reason I'm considering selling/trading the 1045T is that I may be able to pickup an FX 8 core as a direct swap.

Daimus · Jul 29, 2012, 09:24 PM

Quote:

Originally Posted by m&m's

May I know why? I mean your 1045T is probably faster than any FX. Are FX better than Phenom II at crunching?

IMHO 1045T cannot be faster than FX-81xx in any case. I'm running 2 hexa-cores Phenoms and even 1075T 3,6 ghz overclocked is 15-20% slower than eight-cores FX 4,2.

ThE_MaD_ShOt · Jul 29, 2012, 11:47 PM

I can attest to the phenom's not being able to keep up with the fx's as I am running 5 Phenom systems and 1 Athlon x2 system and I can just bearly keep up with Norton and Daimus.

m&m's · Jul 30, 2012, 12:24 AM

Quote:

Originally Posted by Daimus

IMHO 1045T cannot be faster than FX-81xx in any case. I'm running 2 hexa-cores Phenoms and even 1075T 3,6 ghz overclocked is 15-20% slower than eight-cores FX 4,2.

The phenom got 2 core less, is clocked 0.6GHz less and is only 15% slower. For me, FX is a fail but it's cool, everyone have a different opinion about these FX.

ThE_MaD_ShOt · Jul 30, 2012, 12:33 AM

I won't say they are a fail considering they get anywhere from 1 to 3k ppd better then my Phenom x6 systems.

ChaoticAtmosphere · Jul 30, 2012, 03:02 AM

Quote:

Originally Posted by ThE_MaD_ShOt

I won't say they are a fail considering they get anywhere from 1 to 3k ppd better then my Phenom x6 systems.

Yup!

gopal · Jul 30, 2012, 05:34 AM

Cannot upload WUs...Free-Dc is down again....our badges are gone again

**EDIT: Where is Chicken Patty? He is not online since 27th Jul, Is he is taking a break like stinger608 did?**

Radical_Edward · Jul 30, 2012, 06:14 AM

He was having some personal problems on Friday. He'll be back soon enough.

gopal · Jul 30, 2012, 06:31 AM

Quote:

Originally Posted by Radical_Edward

He was having some personal problems on Friday. He'll be back soon enough.

mstenholm · Jul 30, 2012, 03:13 PM

Quote:

Originally Posted by stinger608

Actually it is a Socket F 1207. This system is running 4 quad core Opteron 8250's

Are you sure? It is listed (http://stats.free-dc.org/stats.php?p...hostid=1516868) as 8350's

gopal · Jul 30, 2012, 04:22 PM

Hey Guys, i need a little help...oh sorry i need a big help
The problem in the pic

What should i do?
I have tried to go into Activity and select(look below in the pic)

But it doesen't helped...hurry up guys the deadline is tomorrow!!! and this is a Human Proteome Folding Application.

Q2
Whis is the use of this?

?????????????????????????????????????????????????? ???????

PHaS3 · Jul 30, 2012, 04:49 PM

Q1: try to set to based on preferences and restart the manager - may help, I'm not sure.
Q2: to connect to other hosts you have running BOINC

gopal · Jul 30, 2012, 04:52 PM

Q1:No it didn't worked.,..what's next?
Q2: okay!

Please help with the Q1 it took me 22 hrs to complete that task

PHaS3 · Jul 30, 2012, 04:55 PM

I assume that your internet is ok since you are posting here so it can't be that the PC has no connection the the net. If you click Advanced > Do network communication does the error always appear?

Jul 29, 2012, 02:01 PM	#17326
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,134 (9.95/day) Thanks: 5,367 Thanked 10,021 Times in 3,163 Posts System Specs	Installed a Xig Night Hawk on my main rig last night with a pair of 1500 rpm Scythe Kama Flex fans for Push-Pull. The AS5 still needs to break in but temps are running 5c cooler @ 42C while crunching 100% and with a slight overclock to 3.8Ghz on the FX-8150. These Night Hawk coolers pull some serious heat off of a cpu but man are they a pain to install I'm going to go with water cooling next time. Thanks to theonedub for trading with me for these Scythe fans best fans I've used so far __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Mothers Day Challenge (5/10 thru 5/19- crunch for our Team, for Mom, for games and prizes )** Last edited by Norton; Jul 29, 2012 at 02:12 PM.

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

System Name:	Ultimate Vortex II // Ultimite Vortex
Processor:	AMD FX 8150 Black @ 4.5Ghz // 1055T@ 3.2Ghz
Motherboard:	Asus Crosshair IV Extreme // Asus M4A89TD PRO/USB3
Cooling:	CNPS 9900 MAX Red Led//Thermaltake Big Typhoon VX
Memory:	Corsair Vengeance (2x4Gb) @ 1866 Mhz, 1.5v//Corsair XMS3 Classic (2x4GB) DDR3 @1667Mhz
Video Card:	Sapphire Radeon HD 7970//Sapphire Radeon HD 6870
Hard Disk:	Corsair Force 3 90Gb SSD (OS &Games) - WD Caviar Blue 500 GB (Data) // WD Caviar Blue 320 GB
Optical Drive:	LG 22X DVD+-RW Dual Layer (In ULTIMATEVORTEXII)
CRT/LCD Model:	LG 22in W2242TQ Black 1680x1050 LCD // Teamviewer to check on UltimateVortex
Case:	CoolerMaster HAF 932 Advanced//CoolerMaster CM 690 w/8 x 120 mm fans
Sound Card:	Onboard Realtek 8Ch. w/Logitech Z-5500 500W Surround Awesomeness!
PSU:	Coolermaster Silent Pro 850W// OCZ GameXstream 600w
Software:	Windows 7 x64

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

System Name:	Oldtimer(Always Crunching)
Processor:	Intel P4 631 @ 3.2 GHz [Stock 3.0 GHz]
Motherboard:	Intel D945GCPE
Memory:	512 MB x2 DDR2 (533MHZ and 366 MHZ)
Hard Disk:	160GB Sata1 7200rpm
Optical Drive:	Samsung DVD+-ROM
CRT/LCD Model:	ViewSonic VA703m
PSU:	Normal 450W PSU
Software:	Windows 7 Ultimate 32bit

Jul 29, 2012, 05:02 PM	#17332
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (3.01/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	@ Norton; why is your PII 1045T is offline

Jul 29, 2012, 07:42 PM	#17335
Bow Join Date: Jul 2008 Location: South Colton, New York Posts: 1,641 (0.93/day) Thanks: 749 Thanked 648 Times in 396 Posts System Specs	__________________ "I didn't want my Mom to know I was drag racing for 20 years so I told her I was in prison."

System Name:	SLO-MO-SHUN
Processor:	AMD Phenom II X6 1100T 3.97ghz
Motherboard:	MSI 990FXA-GD80 AM3+ AMD 990FX
Cooling:	CORSAIR CWCH50-1 High Performance Water Cooler
Memory:	G.Skill Ripjaws 8 GB (2 x 4 GB) DDR3 1600
Video Card:	SAPPHIRE HD 7970 3GB GDDR5 Twin Fan
Hard Disk:	SEAGATE Barracuda 7200 RPM 1TB, OCZ Vertex2 60GB SSD
Optical Drive:	ASUS DRW 24B1ST SATA 24X DVD Burner
CRT/LCD Model:	ASUS VH238H 24" 1080P 2MS HDMI LCD
Case:	AZZA Hurrican 2000
Sound Card:	MSI Onboard/Realtek
PSU:	XFX Black Edition XPS-850W 80 Plus Silver
Software:	MICROSOFT Windows 7, 64 Bit

System Name:	Cruncher 1/2/3
Processor:	FX-8120@4,4GHz / PII 1075T@3,7GHz / PII 1045T@3,3GHz
Motherboard:	Asus Crosshair IV Formula (890FX) / Asus M5A97 Pro / Asus M5A97 Pro
Cooling:	Thermalright Silver Arrow SB-E / CoolerMaster V6 GT / CoolerMaster TX3
Memory:	2x4 GB Corsair XMS3 2000 / 2x2 GB Kingston HyperX 1600 / 2x2 GB Kingston HyperX 1600
Video Card:	Sapphire HD7870+Powercolor HD7850 CrossFire / MSI HD6670 / MSI HD6570
Hard Disk:	Corsair ForceGT 90 SSD,WD Black 500 / WD Black 500 / Hitachi 320
Optical Drive:	DVD-RW Pioneer
CRT/LCD Model:	Acer 24'' 2ms / Samsung 22'' 2ms / Philips 42''HDTV
Case:	Cooler Master HAF 932 / Inwin / Inwin
Sound Card:	onboard
PSU:	Thermaltake Grand 1050w 80+Gold / OCZ 650w 80+Bronze / Powerman 450w
Software:	Win 7 SP1 Ult x64

Jul 29, 2012, 11:47 PM	#17339
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,739 (6.96/day) Thanks: 2,532 Thanked 2,443 Times in 1,468 Posts System Specs	I can attest to the phenom's not being able to keep up with the fx's as I am running 5 Phenom systems and 1 Athlon x2 system and I can just bearly keep up with Norton and Daimus. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Jul 30, 2012, 12:33 AM	#17341
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,739 (6.96/day) Thanks: 2,532 Thanked 2,443 Times in 1,468 Posts System Specs	I won't say they are a fail considering they get anywhere from 1 to 3k ppd better then my Phenom x6 systems. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Jul 30, 2012, 05:34 AM	#17343
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (3.01/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	Cannot upload WUs...Free-Dc is down again....our badges are gone again EDIT: Where is Chicken Patty? He is not online since 27th Jul, Is he is taking a break like stinger608 did? Last edited by gopal; Jul 30, 2012 at 05:41 AM. Reason: Reason Reason Reason

Jul 30, 2012, 06:14 AM	#17344
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.59/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	He was having some personal problems on Friday. He'll be back soon enough. __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

System Name:	GLaDOS
Processor:	AMD Phenom II X6 1055T 2.8 ghz
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H50
Memory:	Corsair DDR3 1333Mhz (2 x 4GB)
Video Card:	MSI R7970
Hard Disk:	2 WD Blue 500GBs, 1 WD 1TB
Optical Drive:	MSI 24X DVD-RW SATA DH-24AS
CRT/LCD Model:	2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case:	Corsair 600T White edition
Sound Card:	Onboard
PSU:	Corsair 850HX 850W
Software:	Microsoft Windows 7 Ultimate 64-bit

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Jul 30, 2012, 04:22 PM	#17347
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (3.01/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	Hey Guys, i need a little help...oh sorry i need a big help The problem in the pic What should i do? I have tried to go into Activity and select(look below in the pic) But it doesen't helped...hurry up guys the deadline is tomorrow!!! and this is a Human Proteome Folding Application. Q2 Whis is the use of this? ?????????????????????????????????????????????????? ???????

Jul 30, 2012, 04:49 PM	#17348
PHaS3 Join Date: Mar 2010 Location: South Africa Posts: 177 (0.15/day) Thanks: 656 Thanked 84 Times in 59 Posts System Specs	Q1: try to set to based on preferences and restart the manager - may help, I'm not sure. Q2: to connect to other hosts you have running BOINC

System Name:	H3AT
Processor:	AMD Phenom II x6 1100T @ 4.0GHz, 2.8GHz NB
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H100
Memory:	8 GB (2x 4GB) Corsair Vengeance DDR3 1600
Video Card:	MSI NVIDIA GTX 680 2GB
Hard Disk:	Many = 7TB
Optical Drive:	Pioneer Blu Ray ROM / DVD Writer
CRT/LCD Model:	Samsung P2770 27" LCD
Case:	Cooler Master HAF 922
Sound Card:	Creative Sound Blaster Recon3D PCIe
PSU:	Corsair HX620W
Software:	Windows 7 Ultimate x64
Benchmarks:	@_@

Jul 30, 2012, 04:52 PM	#17349
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (3.01/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	Q1:No it didn't worked.,..what's next? Q2: okay! Please help with the Q1 it took me 22 hrs to complete that task

Jul 30, 2012, 04:55 PM	#17350
PHaS3 Join Date: Mar 2010 Location: South Africa Posts: 177 (0.15/day) Thanks: 656 Thanked 84 Times in 59 Posts System Specs	I assume that your internet is ok since you are posting here so it can't be that the PC has no connection the the net. If you click Advanced > Do network communication does the error always appear?

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16534	May 16, 2013 03:35 AM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM