TPU's WCG/BOINC Team - Page 715

agent00skid · Aug 14, 2012, 09:03 PM

No disassembling possible for my overpriced piece of plastic.

Or do you have another thought?

Norton · Aug 14, 2012, 09:11 PM

Quote:

Originally Posted by agent00skid

No disassembling possible for my overpriced piece of plastic.

Or do you have another thought?

Disassembly is always possible

I've already fixed 2 of mine and stripped a 3rd down to bare plastic (we all have laptops here).

The problem is usually just the switch, the plug, or a bad solder point on the cheap ass circuit boards they use... not too hard to fix

What model cooler is it?

agent00skid · Aug 14, 2012, 09:14 PM

Unfortunately it works... Like a blender. :S

Microsoft cooling pad.

[Ion] · Aug 14, 2012, 09:20 PM

Quote:

Originally Posted by KieX

If it's a sandybridge i7 I'll happily bet $10 it was a Error code 124

Lynnfield, actually, I'm too cheap to buy a SB/IB (at least for now, I can get an IB Xeon + Z77 mobo for $400, so I might do that in a month or two).

EDIT: I re-enabled FAH this afternoon, and it still seems to be holding strong, I'll see how it does this evening

Norton · Aug 14, 2012, 09:28 PM

Quote:

Originally Posted by agent00skid

Unfortunately it works... Like a blender. :S

Microsoft cooling pad.

Looks like this one?

http://www.belkin.com/IWCatProductPa...uct_Id=472610#

If so it should have 4 screws holding it together and a slim 80 or 100mm inside (have 2 of these fans in my parts box somewhere). Screws are likely under the padding if they can't be seen.

agent00skid · Aug 14, 2012, 09:40 PM

Seems to only be a 70mm fan. And practically knew where the screws were when you said there should be some.

But still don't have access to a screwdriver... :S

Edit: Not the one you found. This one: http://www.amazon.com/Microsoft-Z3C-...QU?ref=prid-20

Norton · Aug 14, 2012, 09:53 PM

Quote:

Originally Posted by agent00skid

Seems to only be a 70mm fan. And practically knew where the screws were when you said there should be some.

But still don't have access to a screwdriver... :S

Edit: Not the one you found. This one: http://www.amazon.com/Microsoft-Z3C-...QU?ref=prid-20

Should be made by the same OEM manufacturer.. just rebranded. Save it for a project when you get a screwdriver

..... if you were about 3,000 miles closer I would have it running for you in 'bout 10 minutes!

KieX · Aug 14, 2012, 10:04 PM

Quote:

Originally Posted by [Ion]

Lynnfield, actually, I'm too cheap to buy a SB/IB (at least for now, I can get an IB Xeon + Z77 mobo for $400, so I might do that in a month or two).

EDIT: I re-enabled FAH this afternoon, and it still seems to be holding strong, I'll see how it does this evening

I should have paid more attention

Norton · Aug 14, 2012, 10:12 PM

FYI- WCG is accepted uploads and reporting atm.... you may need to hit retry on the transfers tab to get them to upload though.

Just sent in about 50 wu's a few minutes ago

stinger608 · Aug 14, 2012, 11:34 PM

Got the i7 2600K chip in last night, put it in, and it popped right up to 4.2ghz!!!

The 2500K was great, however with the 2600K chip it will run 8 threads crunching.

JrRacinFan · Aug 14, 2012, 11:51 PM

what core volt stinger?

ThE_MaD_ShOt · Aug 14, 2012, 11:57 PM

When I got home I had about 30 waiting. All have uploaded since

Chicken Patty · Aug 15, 2012, 12:02 AM

Yeah I was able to upload on both rigs completely.

...and KieX, I bet $20.

ThE_MaD_ShOt · Aug 15, 2012, 12:10 AM

My numbers are gonna be low due to this today.

Chicken Patty · Aug 15, 2012, 12:27 AM

mine too, but tomorrow we both might have a very good day.

ThE_MaD_ShOt · Aug 15, 2012, 12:28 AM

That would be cool to get back into the swing of things.

Chicken Patty · Aug 15, 2012, 12:29 AM

Quote:

Originally Posted by ThE_MaD_ShOt

That would be cool to get back into the swing of things.

Indeed, I get my 2nd rig up and it can't upload. I was looking forward to seeing what my #'s looked like.

mjkmike · Aug 15, 2012, 02:11 AM

@F150 You will get work soon. Trucks are the way we get food here, and all the toys.

Still don't post much, but it is good to see the team growing.

@Norton More hot pics. Hammer must be so pissed at me for this. Pie is for hot chicks and not the kind with feathers.

Chicken Patty · Aug 15, 2012, 02:14 AM

^^^ "not the kind with feathers"

That got me, sorry.

[Ion] · Aug 15, 2012, 02:18 AM

Well, I've been offered an incredible deal on a CPU & mobo from KieX, this might be hard to pass up....

stinger608 · Aug 15, 2012, 02:21 AM

Quote:

Originally Posted by JrRacinFan

what core volt stinger?

Hmm, its showing 1.3461 currently at 4.2ghz.

And got a smoking deal, as some of you know, on a combo the other night. Waiting on that to arrive and just fired up the ole 4x4 system so currently crunching 24 threads. :-)

Norton · Aug 15, 2012, 02:24 AM

Quote:

Originally Posted by mjkmike

@F150 You will get work soon. Trucks are the way we get food here, and all the toys.

Still don't post much, but it is good to see the team growing.

@Norton More hot pics. Hammer must be so pissed at me for this. Pie is for hot chicks and not the kind with feathers.

I'll get them in but will still mix it up a bit... so yes some chicks will have feathers

hat · Aug 15, 2012, 10:12 AM

I passed 20 passes of LinX at 3.8GHz using 1.175v (cpu-z reads 1.177). I'd say that's pretty good yeah? Maybe too good to be true... like that time I ran 9 hours of occt linpack at 1.275v for 4GHz and got a BSOD with a x101 code while playing a game. Anyway it seems I found the sweet spot for sure if this is indeed stable. 3.8GHz isn't bad at all... and at 1.175v temps and power usage stay relatively low. 62c load right now, though it's only 72f in here. Almost 4800ppd being reported by Ion's estimator for 3.8GHz.

(FIH) The Don · Aug 15, 2012, 11:00 AM

i dont care much for these so called stress programs, bc 8/10 times they dont hold true in everyday usage

do some crunching, do some gaming, do some everyday use, if it doesnt bsod with that, you got yourself a stable machine

hat · Aug 15, 2012, 11:06 AM

True, at the end of the day actually using the computer seems to be a better test. I figure if I can survive 20 passes of LinX, which seems to be the industry standard among many overclockers, it should be able to survive anything else I can throw at it. Then again, like I said, 9 hours OCCT Linpack stable but then I got a BSOD during supcom2 while crunching. Stress test programs aren't to be 100% trusted, but it's a good indicator of whether you are stable or not. Save that one occurance I just mentioned, I've never had a computer pass a good stability test and crash in something else.

System Name:	Gamer+Cruncher \| Acer 5551g
Processor:	A6-3500 APU @ 3 GHz \| Phenom II X3 N830 @ 1,5 GHz
Motherboard:	Gigabyte GA-A75M-S2V \| Acer JE50_DN
Cooling:	AC Freezer 7 Pro R2, 3 cabinet fans \| Stock laptop with cooling pad
Memory:	24GB 933MHz DDR3 CL9 @ 907 MHz \| 22GB 667MHz DDR3 CL9
Video Card:	Radeon HD 6530D APU @ 604 MHz \| Mobility Radeon HD 5650 @ 550 MHz
Hard Disk:	500GB WD Blue Caviar \| Hitachi 500GB 5400RPM
Optical Drive:	None \| TSSTcorp CDDVDW TS-L633C
CRT/LCD Model:	ASUS VH242H \| Internal 15,6"
Case:	Thermaltake V3 BE \| Laptop
Sound Card:	Realtek \| Realtek, Audio 2 DJ
PSU:	SeaSonic SS-520FL² F3 \| 90W 19V Power brick
Software:	Windows 7 Home Premium \| Windows 7 Home Premium

System Name:	My Fortress/Trish (WCG-1)/Julia (WCG-2)/Junior (WCG-3)/Norton3 (WCG-4)/Lil' Ella (WCG-5)/Mr Foldy
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/i7-920/Xeon (6c/12t)
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill 1600/2x4GB Corsair 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/IGP/HD 7870/2xHD 7770's/2x GTX 580's
Hard Disk:	All Western Digital
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/Fractal XL Rev 2
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/X Gold 750
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

System Name:	Gamer+Cruncher \| Acer 5551g
Processor:	A6-3500 APU @ 3 GHz \| Phenom II X3 N830 @ 1,5 GHz
Motherboard:	Gigabyte GA-A75M-S2V \| Acer JE50_DN
Cooling:	AC Freezer 7 Pro R2, 3 cabinet fans \| Stock laptop with cooling pad
Memory:	24GB 933MHz DDR3 CL9 @ 907 MHz \| 22GB 667MHz DDR3 CL9
Video Card:	Radeon HD 6530D APU @ 604 MHz \| Mobility Radeon HD 5650 @ 550 MHz
Hard Disk:	500GB WD Blue Caviar \| Hitachi 500GB 5400RPM
Optical Drive:	None \| TSSTcorp CDDVDW TS-L633C
CRT/LCD Model:	ASUS VH242H \| Internal 15,6"
Case:	Thermaltake V3 BE \| Laptop
Sound Card:	Realtek \| Realtek, Audio 2 DJ
PSU:	SeaSonic SS-520FL² F3 \| 90W 19V Power brick
Software:	Windows 7 Home Premium \| Windows 7 Home Premium

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

System Name:	My Fortress/Trish (WCG-1)/Julia (WCG-2)/Junior (WCG-3)/Norton3 (WCG-4)/Lil' Ella (WCG-5)/Mr Foldy
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/i7-920/Xeon (6c/12t)
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill 1600/2x4GB Corsair 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/IGP/HD 7870/2xHD 7770's/2x GTX 580's
Hard Disk:	All Western Digital
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/Fractal XL Rev 2
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/X Gold 750
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Aug 14, 2012, 09:03 PM	#17851
agent00skid Join Date: May 2012 Location: Denmark Posts: 374 (0.92/day) Thanks: 18 Thanked 156 Times in 89 Posts System Specs	No disassembling possible for my overpriced piece of plastic. Or do you have another thought?

Aug 14, 2012, 09:14 PM	#17853
agent00skid Join Date: May 2012 Location: Denmark Posts: 374 (0.92/day) Thanks: 18 Thanked 156 Times in 89 Posts System Specs	Unfortunately it works... Like a blender. :S Microsoft cooling pad.

Aug 14, 2012, 09:40 PM	#17856
agent00skid Join Date: May 2012 Location: Denmark Posts: 374 (0.92/day) Thanks: 18 Thanked 156 Times in 89 Posts System Specs	Seems to only be a 70mm fan. And practically knew where the screws were when you said there should be some. But still don't have access to a screwdriver... :S Edit: Not the one you found. This one: http://www.amazon.com/Microsoft-Z3C-...QU?ref=prid-20

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

Aug 14, 2012, 10:12 PM	#17859
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,384 (9.86/day) Thanks: 5,628 Thanked 10,656 Times in 3,325 Posts System Specs	FYI- WCG is accepted uploads and reporting atm.... you may need to hit retry on the transfers tab to get them to upload though. Just sent in about 50 wu's a few minutes ago __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's/Radeon 7870 Helping the world one digit at a time...stop by our WCG Team thread and see what we do!**

Aug 14, 2012, 11:34 PM	#17860
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,515 (3.28/day) Thanks: 7,938 Thanked 2,554 Times in 1,792 Posts System Specs	Got the i7 2600K chip in last night, put it in, and it popped right up to 4.2ghz!!! The 2500K was great, however with the 2600K chip it will run 8 threads crunching. __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

Aug 14, 2012, 11:51 PM	#17861
JrRacinFan Served 5k and counting ... Join Date: Mar 2007 Location: Youngstown, OH Posts: 16,121 (7.05/day) Thanks: 4,149 Thanked 4,552 Times in 4,027 Posts System Specs	what core volt stinger? __________________ Graphics Artists United™ Request Thread Low Cache CPU Club Solaris Utility DVD 3.0 DanishDevil's Logitech Soundroom TPU Video Gallery Sciencemark Revisited

System Name:	Mine; Hers; Our HTPC; NAS Box
Processor:	i7 2600k : i3 2120 : Celeron G440 : P4 2.6Ghz Nwood
Motherboard:	Asrock Z68 Extreme4 : Asus P8P67 Pro : Asrock H61M/U3S3 : Dell
Cooling:	CM 212+ w/ scythe jyuni : Stock : Stock :Stock
Memory:	2x4GB Ripjawx 1866 cl9 : 2x2GB Corsair 1600 cl9 : 2x2GB Ridgebacks 1066 cl5 : 768MB PC3200
Video Card:	Palit GTX560Ti 2Gb : XFX HD5770 : Integrated : Integrated
Hard Disk:	2x 750GB Raid 0 + Maxtor 500GB : WD Black 1TB+Corsair Nova 2 64GB : Toshiba 750GB : Leftover ATA133
Optical Drive:	Lite-On DVD-RW : Samsung DVD-RW : None : None
CRT/LCD Model:	AOC 21" : AOC 20" : Philips 42" HDTV : Headless
Case:	Rocketfish : CM HAF 912 : Bgears Cube Style case : Dell
Sound Card:	X-Fi Xtremegamer : Onboard : Onboard : Onboard
PSU:	Tt 750W Modular : Antec 500W Earthwatts : Corsair CX430 : Dell's OEM

Aug 14, 2012, 11:57 PM	#17862
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.72/day) Thanks: 2,641 Thanked 2,517 Times in 1,506 Posts System Specs	When I got home I had about 30 waiting. All have uploaded since __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

System Name:	Selene / Main / Xp Gaming rig
Processor:	Phenom II x6 1055t @ 3.5 / Phenom II x6 1090t @ 3.6 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	Spire TME III / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 2gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek HD7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 650 watt / Corsair TX 750 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Aug 15, 2012, 12:02 AM	#17863
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,926 (11.78/day) Thanks: 15,179 Thanked 12,324 Times in 7,786 Posts System Specs	Yeah I was able to upload on both rigs completely. ...and KieX, I bet $20. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Aug 15, 2012, 12:10 AM	#17864
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.72/day) Thanks: 2,641 Thanked 2,517 Times in 1,506 Posts System Specs	My numbers are gonna be low due to this today. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

Aug 15, 2012, 12:27 AM	#17865
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,926 (11.78/day) Thanks: 15,179 Thanked 12,324 Times in 7,786 Posts System Specs	mine too, but tomorrow we both might have a very good day. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Aug 15, 2012, 12:28 AM	#17866
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.72/day) Thanks: 2,641 Thanked 2,517 Times in 1,506 Posts System Specs	That would be cool to get back into the swing of things. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

Aug 15, 2012, 02:11 AM	#17868
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,485 (1.22/day) Thanks: 2,699 Thanked 3,755 Times in 983 Posts System Specs	@F150 You will get work soon. Trucks are the way we get food here, and all the toys. Still don't post much, but it is good to see the team growing. @Norton More hot pics. Hammer must be so pissed at me for this. Pie is for hot chicks and not the kind with feathers. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

Aug 15, 2012, 02:14 AM	#17869
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,926 (11.78/day) Thanks: 15,179 Thanked 12,324 Times in 7,786 Posts System Specs	^^^ "not the kind with feathers" That got me, sorry. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Aug 15, 2012, 02:18 AM	#17870
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,783 (7.86/day) Thanks: 8,302 Thanked 9,479 Times in 4,318 Posts System Specs	Well, I've been offered an incredible deal on a CPU & mobo from KieX, this might be hard to pass up.... __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

Aug 15, 2012, 10:12 AM	#17873
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,247 (5.10/day) Thanks: 2,056 Thanked 2,045 Times in 1,555 Posts System Specs	I passed 20 passes of LinX at 3.8GHz using 1.175v (cpu-z reads 1.177). I'd say that's pretty good yeah? Maybe too good to be true... like that time I ran 9 hours of occt linpack at 1.275v for 4GHz and got a BSOD with a x101 code while playing a game. Anyway it seems I found the sweet spot for sure if this is indeed stable. 3.8GHz isn't bad at all... and at 1.175v temps and power usage stay relatively low. 62c load right now, though it's only 72f in here. Almost 4800ppd being reported by Ion's estimator for 3.8GHz. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

Aug 15, 2012, 11:00 AM	#17874
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,407 (3.84/day) Thanks: 3,101 Thanked 2,970 Times in 1,835 Posts System Specs	i dont care much for these so called stress programs, bc 8/10 times they dont hold true in everyday usage do some crunching, do some gaming, do some everyday use, if it doesnt bsod with that, you got yourself a stable machine __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

Aug 15, 2012, 11:06 AM	#17875
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,247 (5.10/day) Thanks: 2,056 Thanked 2,045 Times in 1,555 Posts System Specs	True, at the end of the day actually using the computer seems to be a better test. I figure if I can survive 20 passes of LinX, which seems to be the industry standard among many overclockers, it should be able to survive anything else I can throw at it. Then again, like I said, 9 hours OCCT Linpack stable but then I got a BSOD during supcom2 while crunching. Stress test programs aren't to be 100% trusted, but it's a good indicator of whether you are stable or not. Save that one occurance I just mentioned, I've never had a computer pass a good stability test and crash in something else. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16586	Jun 14, 2013 07:23 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM