TechPowerup IC Diamond Results Thread - Page 3

hat · Aug 26, 2012, 03:26 AM

Yeah I didn't even try with the case standing up.

VulkanBros · Aug 26, 2012, 09:08 AM

Update test result with Arctic MX-4:

Picture 1
Artic MX-4
Ambient Temp:20,1
Idle Temp:28
Load Temp:32

Will now conduct all tests again with OC (from 3.6 GHz to 4.2 GHz)

Quote:

Originally Posted by VulkanBros

ASUS Chrosshair Formula IV
Antec KÜHLER H2O 920 with 2 x 120 mm push/pull
AMD FX 8150 BE (Everything at stock for this test)

Tomorrow I will conduct a overclocked test.

Cure times are 2 hours with OCCT LinX pack.

Will test these three compounds: (Picture one)
1. Antec Formula 7 Nano Diamond
2. IC Diamond
3. Arctic MX-4 (will test this tomorrow)

Test method:
1. Heat sink unmounted and cleaned with acetone and at last isopropyl-alcohol.
2. Take pressure test with pressure paper (Picture one)
3. Appy TIM (center dot)

Picture 2
Antec Formula 7 Nano Diamond
Ambient Temp:21,8
Idle Temp:30
Load Temp:35

Picture 3
IC Diamond
Ambient Temp:21,7
Idle Temp:31
Load Temp:34

SonDa5 · Aug 26, 2012, 10:33 AM

prolimatech pk-1

Ambient Temps: 21C

IC Diamond 24

LinX testing in diagnostic mode.

Ambient Temps 21C.

Contact Pressure testing with DT Sniper Water Block with IB 3570k.

DT SNIPER Block

Waiting on some new Tygon Tubing and a different back plate for my DT Sniper block and will test again for contact pressure with the paper and do another temp comparison.

Right now PK-1 and IC Diamond look close to the same in terms of thermal performance but the contact paper shows that I got a good mount.

SonDa5 · Aug 26, 2012, 10:41 AM

Quote:

Originally Posted by IC Diamond

I will post a colour chart as soon as I find it on their site so you can estimate within about 10% your total pressure.

http://www.sensorprod.com/prescale/p...ructions-2.pdf

Looks like the only color that my paper is revealing is a hot redish pink color. There has to be other colors that are missing.

t_ski · Aug 26, 2012, 12:06 PM

No, pink is all that should show. It's just how much pink is showing. Take a look at some of the other posts in the thread.

Frogger · Aug 26, 2012, 01:46 PM

Quote:

Originally Posted by SonDa5

Looks like the only color that my paper is revealing is a hot redish pink color. There has to be other colors that are missing.

http://innovationcooling.com/Indepan...les/samttl.jpg
amount of 'pink' = pressure in the above chart note the pressure scale on side of each inprint, translate that to the dregree of pink

SonDa5 · Aug 26, 2012, 06:08 PM

Quote:

Originally Posted by Frogger

http://innovationcooling.com/Indepan...les/samttl.jpg
amount of 'pink' = pressure in the above chart note the pressure scale on side of each inprint, translate that to the dregree of pink

I saw that and it shows other colors. There has to be a color code for this paper. Pink is showing a certain amount of pressure. I'm sure there are other pieces of paper like this that pick up other pressures that would show a different color.

SonDa5 · Aug 26, 2012, 06:34 PM

Opt33 at overclock.net stated that my contact pressure mount results are nearly perfect.

http://www.overclock.net/t/1268070/d...#post_18024755

I'm going top turn the block 90 degrees so that the contact pressure marks are parallel with the cpu die.

Frogger · Aug 26, 2012, 11:47 PM

Quote:

Originally Posted by IC Diamond

If you would do a C/P test I will send it out to sensor products for a full lab analysis.

Quote:

Originally Posted by SonDa5

I saw that and it shows other colors. There has to be a color code for this paper

think the other colors are a result of " full lab analysis"

Frogger · Aug 26, 2012, 11:56 PM

first run pics
results for GPU run
from rig in specs
GPU:core 1070 mem 1400 stk voltage stk fan profile
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp:38c
Load Temp:92c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:36c
Load Temp:76c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

GPU_o/c 1100core/1500mem stk voltage fan 95%
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp: 35c
Load Temp:84c FurMarkv1.9.1 [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:35c
Load Temp:78c FurMarkv1.9.1 [avg 3 runs]

CPU:
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp:39c @stk
Load Temp:59c @stk IntelBurnTest v2.54

ICD
Ambient Temp:26c 28/8/12 7pm
Idle Temp:31C
Load Temp:46c IntelBurnTest v2.54

CPU_o/c 4536.9MHz @ 1.4v core
Before Compound: MX4
Ambient Temp:30c 10/8/12 9pm
Idle Temp:32c
Load Temp:70c IntelBurnTest v2.54

ICD
Ambient Temp:26c 28/8/12 7pm
Idle Temp:31c
Load Temp:69c IntelBurnTest v2.54

will up pics of C/P paper
MSI Twin Frozr IV had to lap some of the nickel pate off to get it flat
Intel Q2600K IHS high top,bottom,right side lapped to flat mirror finish

SonDa5 · Aug 27, 2012, 12:03 AM

Frogger looks like ICD stomped all over MX4 from your tests.

SonDa5 · Aug 27, 2012, 12:06 AM

Quote:

Originally Posted by Frogger

think the other colors are a result of " full lab analysis"

Wonder what the full lab analysis process is.

t_ski · Aug 27, 2012, 12:43 AM

Quote:

Originally Posted by SonDa5

I saw that and it shows other colors. There has to be a color code for this paper. Pink is showing a certain amount of pressure. I'm sure there are other pieces of paper like this that pick up other pressures that would show a different color.

Quote:

Originally Posted by SonDa5

Opt33 at overclock.net stated that my contact pressure mount results are nearly perfect.

http://www.overclock.net/t/1268070/d...#post_18024755

I'm going top turn the block 90 degrees so that the contact pressure marks are parallel with the cpu die.

Quote:

Originally Posted by Frogger

think the other colors are a result of " full lab analysis"

Quote:

Originally Posted by Frogger

first run pics
results for GPU run
from rig in specs
GPU:core 1070 mem 1400 stk voltage stk fan profile
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp:38c
Load Temp:92c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:36c
Load Temp:76c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

GPU_o/c 1100core/1500mem stk voltage fan 95%
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp: 35c
Load Temp:84c FurMarkv1.9.1 [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:35c
Load Temp:78c FurMarkv1.9.1 [avg 3 runs]

will up pics of C/P paper when i can get @ the scanner on the other rig

Quote:

Originally Posted by SonDa5

Frogger looks like ICD stomped all over MX4 from your tests.

Quote:

Originally Posted by SonDa5

Wonder what the full lab analysis process is.

Please use the "multi-quote" button or edit your posts instead of posting multiple times in a row.

IC Diamond · Aug 27, 2012, 03:15 PM

Quote:

Originally Posted by Frogger

first run pics
results for GPU run
from rig in specs
GPU:core 1070 mem 1400 stk voltage stk fan profile
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp:38c
Load Temp:92c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:36c
Load Temp:76c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs]

GPU_o/c 1100core/1500mem stk voltage fan 95%
Before Compound: MX4
Ambient Temp:30c 08/8/12 9pm
Idle Temp: 35c
Load Temp:84c FurMarkv1.9.1 [avg 3 runs]

ICD
Ambient Temp:29c 26/08/12 7pm
Idle Temp:35c
Load Temp:78c FurMarkv1.9.1 [avg 3 runs]

will up pics of C/P paper
MSI Twin Frozr IV had to lap some of the nickel pate off to get it flat

Nice progression on the lapping - so what do you think of the paper?

Frogger · Aug 27, 2012, 04:22 PM

Quote:

Originally Posted by IC Diamond

Nice progression on the lapping - so what do you think of the paper?

Excelent product, showed just where to lap the Twin Frozr IV. Just goes to show that mass production of the coolers will always yield some that just arn't flat

. Going to order a sheet from SP to have around for client custom builds.
In the middle of a rebuild now, But going to try & do the CPU on the Game [specs] Rig later today.

Brusfantomet · Aug 27, 2012, 09:41 PM

Got the set with contact pressure paper today, the CP paper did not give any pink color tho, only different amounts of opaqueness, rather similar to sample 19A and 20A on the pressure test, but with a small speck about 0,5 cm2 in size at the center. will do some temp test tomorrow.

Edit: Here are the results:

AS5 idle: 38C 39C 40C 39C average: 39C
ICD idle: 35C 34C 36C 34C average: 35C
improvement: 4 degrees C

AS5 load: 71C 72C 70C 70C average: 70,75C (at 35 GFlops)
ICD load: 65C 66C 63C 64C average: 64,5C (at 35.5 GFlops)
improvement: 6,25C

pics for the different run.
thank you for the clearly superior TIM.

SonDa5 · Aug 27, 2012, 11:12 PM

Quote:

Originally Posted by Brusfantomet

Got the set with contact pressure paper today, the CP paper did not give any pink color tho, only different amounts of opaqueness, rather similar to sample 19A and 20A on the pressure test, but with a small speck about 0,5 cm2 in size at the center. will do some temp test tomorrow.

Photos?

t_ski · Aug 28, 2012, 02:36 AM

Sounds like maybe the sheets were not lined up right. Should be shiney side out for each.

IC Diamond · Aug 28, 2012, 05:00 PM

Here is the sensor product manual for analyzing (roughly) your pressure results

Prescale - Color Correlation Manual.pdf

Nokiron · Aug 28, 2012, 07:19 PM

Just ran some tests. Will update with results after the paste has cured. Will do a higher overclock aswell.
Might try applying some ICD on a 580 reference just for the heck of it.

i7 3820 4.4Ghz
1.28V
1.6PLL
NH-D14 with only 140mm fan - ~900rpm

Before Compound: Noctua NT-H1
Ambient Temp: 27
Idle Temp: 33
Load Temp: 65 - 62 -62 - 65

ICD
Ambient Temp: 27
Idle Temp: 32
Load Temp: 65 - 61 - 61 -64

brandonwh64 · Aug 28, 2012, 08:07 PM

i7 920
Stock Volts
Stock PLL
Evercool Transformer 4 with 120mm fan 85CFM - 2000pm

Before Compound: AS5
Ambient Temp: 25
Idle Temp: 36
Load Temp: 66 - 63 -61 - 64

IC-D7
Ambient Temp: 25
Idle Temp: 35
Load Temp: 64 - 61 -62 - 62

About a 2-3 degree difference which was to be expected. The contact paper has shown that I have a great contact between the CPU and Cooler. This is one thing I was worrying about using this older cooler.

Protagonist · Aug 28, 2012, 09:11 PM

Tested The ICD 24 On My

i7-3770
Stock Volts
Stock Intel Cooler

I have listed the Temps in this order (Current) - (Minimum) - (Maximum)

Stock Thermal Compound That Comes with Intel Cooler
Ambient Temp: 18C
Idle Temp: 29C
Load Temp: 70C - 67C - 73C

ICD Test Sample
Ambient Temp: 18C
Idle Temp: 28C
Load Temp: 68C - 65C - 70C

IC Diamond · Aug 28, 2012, 09:23 PM

Building library of WB Contact images from our facebook page -Larkcooler CPU WB 500 Water block contact/pressure test. Note this block has a round , rather than a square base - looks like just a couple cm contact

xspc RASA block with its backing plate.

IC Diamond · Aug 28, 2012, 09:30 PM

Quote:

Originally Posted by SonDa5

prolimatech pk-1

Ambient Temps: 21C

http://minidriven.com/BlacknBlueforI...R/PK1vsICD.jpg

IC Diamond 24

LinX testing in diagnostic mode.

Ambient Temps 21C.

http://minidriven.com/BlacknBlueforI...OND4point5.jpg

Contact Pressure testing with DT Sniper Water Block with IB 3570k.

DT SNIPER Block

http://minidriven.com/BlacknBlueforI...ITHOUTNUTS.jpg

http://minidriven.com/BlacknBlueforI...ER/DTSCT1s.jpg

http://minidriven.com/BlacknBlueforI...SCT1Papers.jpg

Waiting on some new Tygon Tubing and a different back plate for my DT Sniper block and will test again for contact pressure with the paper and do another temp comparison.

Right now PK-1 and IC Diamond look close to the same in terms of thermal performance but the contact paper shows that I got a good mount.

Missing contact images? I would like to add to our WB library

SonDa5 · Aug 29, 2012, 01:24 AM

Quote:

Originally Posted by IC Diamond

Missing contact images? I would like to add to our WB library

It is in the links. Just save as image. It is of the DT Sniper Water block.

Aug 26, 2012, 03:26 AM	#51
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Yeah I didn't even try with the case standing up. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

System Name:	The Skeleton Build
Processor:	i5 3570K @ 4.4 GHz 24/7 (CooLaboratory Liquid Ultra)(BIOS 1707)
Motherboard:	ASUS Maximus V Gene
Cooling:	KÜHLER H2O 920 with 2 x 120 mm push/pull
Memory:	4x4 GB DDR3 1866 MHz Dominator Platinum
Video Card:	GTX 670 DirectCU II (ThermalTake TG-1)
Hard Disk:	OS: Vector 256 GB / DATA: Vector 256 GB / GAMES: Vertex4 256 GB
Optical Drive:	Wasn´t that in 1980?
CRT/LCD Model:	24" SyncMaster P2450 (1920x1080)
Case:	Antec Skeleton
Sound Card:	SupremeFX III (Realtek ALC898 chip)
PSU:	Corsair Pro Series Gold AX850
Software:	Win 8 Pro x64 w/StarDock Start 8 & KIS 2013

Aug 26, 2012, 10:33 AM	#53
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	prolimatech pk-1 Ambient Temps: 21C IC Diamond 24 LinX testing in diagnostic mode. Ambient Temps 21C. Contact Pressure testing with DT Sniper Water Block with IB 3570k. DT SNIPER Block Waiting on some new Tygon Tubing and a different back plate for my DT Sniper block and will test again for contact pressure with the paper and do another temp comparison. Right now PK-1 and IC Diamond look close to the same in terms of thermal performance but the contact paper shows that I got a good mount. Last edited by SonDa5; Aug 27, 2012 at 12:00 AM.

System Name:	Black Killing Machine
Processor:	Delidded NO IHS mount Intel i7-3770k
Motherboard:	MSI Z77 MPower
Cooling:	Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory:	30nm Wonder Green 8GB Sammy set
Video Card:	SAPPHIRE HD7950 OC 950mhz Edition
Hard Disk:	2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Optical Drive:	LG 12X BD burner
CRT/LCD Model:	Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case:	SilverStone Raven rv-02
Sound Card:	Audio Technica AD700 headphones, Topping D2 DAC/Headphone AMP
PSU:	Seasonic Platinum 860
Software:	Windows 7 Pro 64bit
Benchmarks:	http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/show_oc.php?id=25793

Aug 26, 2012, 12:06 PM	#55
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,841 (3.40/day) Thanks: 3,001 Thanked 3,306 Times in 2,528 Posts System Specs	No, pink is all that should show. It's just how much pink is showing. Take a look at some of the other posts in the thread. __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

System Name:	MONEY PIT
Processor:	i7-3770K @ 4800 1.20v batch #3231B415
Motherboard:	ASrock Z77 OC Formula w onboard waterblocks
Cooling:	Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory:	G,skill Trident X F3-2400C10D-16GTX
Video Card:	MSI R7970 PE @1150/1700 LIGHTING bios Wcooled
Hard Disk:	2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
CRT/LCD Model:	eyefinity 3 Samsung2343bwx
Case:	NZXT Phantom White w/red
Sound Card:	ReCon3d fatal1ty pro, Logitech z906 THX
PSU:	corsair AX860i
Software:	64bit ++++ win 7

Aug 26, 2012, 06:34 PM	#58
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Opt33 at overclock.net stated that my contact pressure mount results are nearly perfect. http://www.overclock.net/t/1268070/d...#post_18024755 I'm going top turn the block 90 degrees so that the contact pressure marks are parallel with the cpu die. Last edited by SonDa5; Aug 26, 2012 at 07:51 PM.

Aug 26, 2012, 11:56 PM	#60
Frogger Join Date: Feb 2006 Location: ONTARIO CANADA Posts: 1,932 (0.73/day) Thanks: 324 Thanked 242 Times in 216 Posts System Specs	first run pics results for GPU run from rig in specs GPU:core 1070 mem 1400 stk voltage stk fan profile Before Compound: MX4 Ambient Temp:30c 08/8/12 9pm Idle Temp:38c Load Temp:92c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs] ICD Ambient Temp:29c 26/08/12 7pm Idle Temp:36c Load Temp:76c @stk_FurMarkv1.9.1 fan profile Auto [avg 3 runs] GPU_o/c 1100core/1500mem stk voltage fan 95% Before Compound: MX4 Ambient Temp:30c 08/8/12 9pm Idle Temp: 35c Load Temp:84c FurMarkv1.9.1 [avg 3 runs] ICD Ambient Temp:29c 26/08/12 7pm Idle Temp:35c Load Temp:78c FurMarkv1.9.1 [avg 3 runs] CPU: Before Compound: MX4 Ambient Temp:30c 08/8/12 9pm Idle Temp:39c @stk Load Temp:59c @stk IntelBurnTest v2.54 ICD Ambient Temp:26c 28/8/12 7pm Idle Temp:31C Load Temp:46c IntelBurnTest v2.54 CPU_o/c 4536.9MHz @ 1.4v core Before Compound: MX4 Ambient Temp:30c 10/8/12 9pm Idle Temp:32c Load Temp:70c IntelBurnTest v2.54 ICD Ambient Temp:26c 28/8/12 7pm Idle Temp:31c Load Temp:69c IntelBurnTest v2.54 will up pics of C/P paper MSI Twin Frozr IV had to lap some of the nickel pate off to get it flat Intel Q2600K IHS high top,bottom,right side lapped to flat mirror finish Attached Thumbnails __________________ You can't be a real country unless you have a beer and an airline-it helps if you have some kind of a football team,or some nuclear weapons,BUT at the very least you need a BEER!-Frank Zappa Last edited by Frogger; Aug 28, 2012 at 11:54 PM. Reason: UPDATE RESULTS

Aug 27, 2012, 12:03 AM	#61
SonDa5 Join Date: Aug 2008 Posts: 1,405 (0.80/day) Thanks: 209 Thanked 282 Times in 182 Posts System Specs	Frogger looks like ICD stomped all over MX4 from your tests.

Aug 27, 2012, 09:41 PM	#66
Brusfantomet Join Date: Mar 2012 Location: Norway Posts: 58 (0.14/day) Thanks: 5 Thanked 9 Times in 9 Posts System Specs	Got the set with contact pressure paper today, the CP paper did not give any pink color tho, only different amounts of opaqueness, rather similar to sample 19A and 20A on the pressure test, but with a small speck about 0,5 cm2 in size at the center. will do some temp test tomorrow. Edit: Here are the results: AS5 idle: 38C 39C 40C 39C average: 39C ICD idle: 35C 34C 36C 34C average: 35C improvement: 4 degrees C AS5 load: 71C 72C 70C 70C average: 70,75C (at 35 GFlops) ICD load: 65C 66C 63C 64C average: 64,5C (at 35.5 GFlops) improvement: 6,25C pics for the different run. thank you for the clearly superior TIM. Attached Thumbnails Last edited by Brusfantomet; Aug 28, 2012 at 08:15 PM.

Processor:	I7 920 @ 4.2 GHz
Motherboard:	MSI X58 Pro-e
Cooling:	custom water loop
Memory:	12 GiB corsair XMS
Video Card:	2 x Radeon HD 6950 CF
Hard Disk:	3 x OCZ vertex 2 128 GB & 2 x 2 TB Samsung F4
Optical Drive:	NEC dvd burner
CRT/LCD Model:	Dell WFP 3008
Case:	Caselabs Magnum M8
Sound Card:	Asus Xonar DSX
PSU:	corsair AX850

Aug 28, 2012, 02:36 AM	#68
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,841 (3.40/day) Thanks: 3,001 Thanked 3,306 Times in 2,528 Posts System Specs	Sounds like maybe the sheets were not lined up right. Should be shiney side out for each. __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

Aug 28, 2012, 05:00 PM	#69
IC Diamond Innovation Cooling Rep Join Date: Aug 2012 Posts: 119 (0.42/day) Thanks: 0 Thanked 91 Times in 43 Posts	Here is the sensor product manual for analyzing (roughly) your pressure results Prescale - Color Correlation Manual.pdf

Aug 28, 2012, 07:19 PM	#70
Nokiron Join Date: Feb 2012 Posts: 12 (0.03/day) Thanks: 0 Thanked 5 Times in 4 Posts System Specs	Just ran some tests. Will update with results after the paste has cured. Will do a higher overclock aswell. Might try applying some ICD on a 580 reference just for the heck of it. i7 3820 4.4Ghz 1.28V 1.6PLL NH-D14 with only 140mm fan - ~900rpm Before Compound: Noctua NT-H1 Ambient Temp: 27 Idle Temp: 33 Load Temp: 65 - 62 -62 - 65 ICD Ambient Temp: 27 Idle Temp: 32 Load Temp: 65 - 61 - 61 -64

Processor:	Intel Core i7 2600K
Motherboard:	Asus Maximus IV Extreme P67
Cooling:	Be-quiet Dark Rock Pro C1
Memory:	G.Skill RipjawsX 7-8-7-24 1600Mhz
Video Card:	EVGA GTX 580 SC
Hard Disk:	EVGA GTX 580 SC
Case:	Silverstone Fortress FT02-BW
PSU:	Corsair AX1200

Aug 28, 2012, 08:07 PM	#71
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,562 (10.02/day) Thanks: 2,146 Thanked 5,341 Times in 3,696 Posts System Specs	i7 920 Stock Volts Stock PLL Evercool Transformer 4 with 120mm fan 85CFM - 2000pm Before Compound: AS5 Ambient Temp: 25 Idle Temp: 36 Load Temp: 66 - 63 -61 - 64 IC-D7 Ambient Temp: 25 Idle Temp: 35 Load Temp: 64 - 61 -62 - 62 About a 2-3 degree difference which was to be expected. The contact paper has shown that I have a great contact between the CPU and Cooler. This is one thing I was worrying about using this older cooler. __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Aug 28, 2012, 09:11 PM	#72
Protagonist Join Date: Sep 2010 Posts: 674 (0.68/day) Thanks: 18 Thanked 112 Times in 86 Posts System Specs	Tested The ICD 24 On My i7-3770 Stock Volts Stock Intel Cooler I have listed the Temps in this order (Current) - (Minimum) - (Maximum) Stock Thermal Compound That Comes with Intel Cooler Ambient Temp: 18C Idle Temp: 29C Load Temp: 70C - 67C - 73C ICD Test Sample Ambient Temp: 18C Idle Temp: 28C Load Temp: 68C - 65C - 70C

Processor:	Intel Core i7-3770
Motherboard:	Intel Desktop Board DZ68BC Extreme
Cooling:	Intel Stock Cooler
Memory:	Corsair Vengeance LP 16GB (2 x 8GB @ 1600MHz)
Video Card:	EVGA GTX 670 FTW 2GB
Hard Disk:	Samsung 128GB SSD + WD 500GB HDD
Optical Drive:	LG DVD Writer
CRT/LCD Model:	Dell SX2210 1920x1080 22 Inch
Case:	In Win F430
Sound Card:	On Board
PSU:	Seasonic X-660 (SS-660KM Active PFC F3)
Software:	Windows 7 Ultimate x64

Aug 28, 2012, 09:23 PM	#73
IC Diamond Innovation Cooling Rep Join Date: Aug 2012 Posts: 119 (0.42/day) Thanks: 0 Thanked 91 Times in 43 Posts	Building library of WB Contact images from our facebook page -Larkcooler CPU WB 500 Water block contact/pressure test. Note this block has a round , rather than a square base - looks like just a couple cm contact xspc RASA block with its backing plate.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TechPowerUp! Official IC Diamond Test	stinger608	Overclocking & Cooling	559	Apr 4, 2013 02:47 PM
TechPowerUp and ASUS Hardware Giveaway Results for June 2010 Announced	btarunr	News	14	Jul 3, 2010 01:46 PM
TechPowerUp and ASUS Hardware Giveaway Results for May 2010 Announced	btarunr	News	30	Jun 14, 2010 02:11 PM
TechPowerUp Reader Survey 2008 - Results	W1zzard	Reviews	44	Mar 27, 2008 04:50 PM
WinTune97 TechPowerUp Forums Benchmark results POST	Alec§taar	Overclocking & Cooling	16	Aug 8, 2006 03:55 PM