The AMD Phenom II OC'ers Club

[PHaS3]

Originally Posted by JrRacinFan

It happens bro.

Lol yeah stupidity leak :|

Thanks for understanding hahaha

[JrRacinFan]

Originally Posted by PHaS3

Thanks for understanding hahaha

Nah, you're just lucky I'm in a good mood today.

[PHaS3]

Haha I shall count myself lucky then :P

[JrRacinFan]

Originally Posted by PHaS3

Haha I shall count myself lucky then :P

LOL Yup

@ Stanmen

What's your current clocks at?

@ VelvetWafer

I see you lurking

[Velvet Wafer]

Originally Posted by JrRacinFan

@ VelvetWafer

I see you lurking

Well, Well!
There is a Reason for that!

Its Done,finally!

[JrRacinFan]

Originally Posted by Velvet Wafer

Well, Well!
There is a Reason for that!

Its Done,finally!

http://img.techpowerup.org/120612/5%20cores192.jpg

Congrats on the unlock. You see what I got!?

[Velvet Wafer]

Originally Posted by JrRacinFan

Congrats on the unlock. You see what I got!?
http://img.techpowerup.org/120612/Capture037.jpg

2600k it seems? Or maybe a BD?

[JrRacinFan]

Originally Posted by Velvet Wafer

2600k it seems?

Mmmhmm. Got a fabulous deal. Will be setting up crunching on it here in next couple days.

[Velvet Wafer]

Originally Posted by JrRacinFan

Mmmhmm. Got a fabulous deal. Will be setting up crunching on it here in next couple days.

sounds majorly fine, gratz on that!

[StanMen]

Originally Posted by JrRacinFan

LOL Yup

@ Stanmen

What's your current clocks at?

my Corent clock for CPU and RAM ? bud i have all stock for the moment but my ram is running at 1600Mhz is down pick take a look my speeds buddy





i will get new cooler ant then i OC this machine he i allrady have settings from you guys to get the OC for start and my start wold be CPU 3.6Ghz idle and on Turbo mod 4.0Ghz and my ram is 1600 stock but i will get HT for is 2600 if i'm not rong hehe

[JrRacinFan]

Originally Posted by StanMen

my Corent clock for CPU and RAM ? bud i have all stock for the moment but my ram is running at 1600Mhz is down pick take a look my speeds buddy

http://www.techpowerup.com/forums/at...1&d=1339512690



i will get new cooler ant then i OC this machine he i allrady have settings from you guys to get the OC for start and my start wold be CPU 3.6Ghz idle and on Turbo mod 4.0Ghz and my ram is 1600 stock but i will get HT for is 2600 if i'm not rong hehe

Yeah get you some cooling and we will get you running

[StanMen]

Originally Posted by JrRacinFan

Yeah get you some cooling and we will get you running

hehehe thanks bud !! u guys are amazing ! thanks

[Athlonite]

Originally Posted by StanMen

And NB multi for 14x to get 2600Mhz and this is for ram ? or CPU, also if i put NB for 2600Mhz i get HT 2600Mhz for CPU i'm a right ?

It's for the CPUs NB where the internal memory controller resides (IMC) and if it changes the the HT aswell then don't worry about it it wont harm it

[Athlonite]

Originally Posted by PHaS3

CPU to 3400MHz (17x200) @ 1.36V - Tried for higher? should get 3.6 - 3.8 I reckon

NB to 2600MHz (13x200) @ 1.4V - careful with this, make sure you are setting the voltage of the CPU-NB and not the motherboard north bridge. Otherwise 2600 on the CPU-NB is decent

HTT to 2600MHz (13x200) @ 1.1V - HT can stay at 2000 or 2200 if needed, doesnt really have that much of an effect on performance

I know which voltages I'm setting thanks for the concern tho and 1.4V was what I was told in here to use as I use 4 x 1GB dimms and less than 1.4V is unstable even at stock clocks

as for getting 3.6 or 3.8 I would go that high but I'm on air not water after 3.5 the PII 940 gets mighty hot when pushed and stays abit to warm for my liking at idle the difference between 3.4 > 3.6 is around 15c idle and 35c extra when loaded

currently it sits at 28c idle and 47c 100% load so I'm happy with that and with the extra on the HT and NB it makes up for the small lack of overall clock speed

[Mordecai Walfish]

Okay so I finally got my M5A99x EVO up and fully running with my previous processor, an AMD Phenom II 555BE that was tested completely stable on air @ 3.6ghz with all 4 cores unlocked.

I would like to get a similar result on this board but the layout of the OC options are truly unlike any I have dealt with before. I also have DDR3-1600 ram that is only running @ 1333, I understand that I will probably have to manually set a bunch of timings, but there is a screen in that shows me the two timing profiles for the memory: the basic 1333 one that is currently in, and then next to it, it lists the correct "XMB" profile that has the timings for my memory listed clear as day. Is there a place I can go in the BIOS to just have the memory follow that second "XMB" profile or do I have to set these all manually? I read the manual front to back and am unsure of this.

The 99x EVO is an amazing motherboard, but it's just a bit alien with the touchscreen-looking interface for the bios and the sheer range of options i'm just not used to.

Paired this with a GTX-480 so I know that every bit of O/C I can get will definitely help my cause here ^_^ I would like to just start by getting back to the known good settings I had for that CPU/RAM, which was 3600mhz on all 4 cores, 2400mhz on the NB (with a bump in voltage to 1.0125 i believe.. i'll have to research a bit up it's been a while =), and the ram tightened from timings of 9-9-9-24-2t to 8-9-8-24-1t @ DDR3-1600 speed (800mhz)

Any 99xEVO owners want to help lead me in the right direction here?

Thanks!!
-Morde





EDIT: D'oh! G-skill to the rescue: http://www.gskill.us/forum/showthread.php?t=7688

I guess the main thing I'd like to know is about the voltages on this motherboard and whether I should be setting as many as I can manually, or if I should use any of the EPU/VRM+, etc features on the motherboard while overclocking for the best results.

I remembered to disable CPU Spread Spectrum, Cool&Quiet & C1E, but with all of the other options on this board I cant help but wonder if I'm missing anything I should be switching on/off for the 4 core unlock/oc/memOC. For example, VRM Spread Spectrum and PCIE Spread Spectrum, should those also be disabled? So much going on with this board and that suite of software is just massive.. is it recommended to install the "AI Suite" in windows for this motherboard, or will I be not be missing much by only modifying the stuff included in the bios?

Sorry for all the questions.. just a bit overwhelmed and looking for some experienced users ^_^ -Thanks again!

[Norton]

Originally Posted by Mordecai Walfish

Okay so I finally got my M5A99x EVO up and fully running with my previous processor, an AMD Phenom II 555BE that was tested completely stable on air @ 3.6ghz with all 4 cores unlocked.

I would like to get a similar result on this board but the layout of the OC options are truly unlike any I have dealt with before. I also have DDR3-1600 ram that is only running @ 1333, I understand that I will probably have to manually set a bunch of timings, but there is a screen in that shows me the two timing profiles for the memory: the basic 1333 one that is currently in, and then next to it, it lists the correct "XMB" profile that has the timings for my memory listed clear as day. Is there a place I can go in the BIOS to just have the memory follow that second "XMB" profile or do I have to set these all manually? I read the manual front to back and am unsure of this.

The 99x EVO is an amazing motherboard, but it's just a bit alien with the touchscreen-looking interface for the bios and the sheer range of options i'm just not used to.

Paired this with a GTX-480 so I know that every bit of O/C I can get will definitely help my cause here ^_^ I would like to just start by getting back to the known good settings I had for that CPU/RAM, which was 3600mhz on all 4 cores, 2400mhz on the NB (with a bump in voltage to 1.0125 i believe.. i'll have to research a bit up it's been a while =), and the ram tightened from timings of 9-9-9-24-2t to 8-9-8-24-1t @ DDR3-1600 speed (800mhz)

Any 99xEVO owners want to help lead me in the right direction here?

Thanks!!
-Morde

The setting are in there but the UEFI interface is a little confusing... I still have trouble finding stuff in there. Double check the manual to see if it shows you where the sub-menus are within each page.

There are a few of us here with that board so I hope one of the other users can help you out with it.

[Mordecai Walfish]

Originally Posted by Norton

There are a few of us here with that board so I hope one of the other users can help you out with it.

Heres the progress I've made:

ram timings are back to 8-9-8-24-40-1t @ DDR3-1600 speed

CPU/NB is set to 2400mhz, voltage is set to 1.275

HT is set to 2400mhz (this one is strange, as the bios always reports it as being set at 2000, even when I set it to 2400.. does this one require a voltage increase at all to o/c?)

CPU Multiplier set to x17 (3.4 Ghz)

Idle temp: 39
Linpack (High): 59


EDIT - Made a thread in the Overclocking section regarding this, if you care to comment there it would be appreciated: http://www.techpowerup.com/forums/sh...d.php?t=167904

Thanks again!
-Mordecai

[Athlonite]

it would seem that one of the patches MS put out for rhe BD FX is giving me little old 940 a wee bit of a boost

Hotfix for Windows (KB2645594) Install status: Successful

which is the tread ordering one the other one for core parking didn't install (no reason it should I don't have an BD based FX or opteron CPU)

[gmastra100]

Not sure if this is the thread I need to be on, but I have a phenom II and I want to overclock , so here I am , appologies if its the wrong place.
I have a phenom x 2 3GHz Callisto 545 which I use in an unlocked 4x denab 3GHz manner, but cant get more than 3.4GHz stable in x4 mode.
There is a x6 1055T up for sale on a certain web page who might consider a part exchange.
Question, will I get more noticable difference from it ?
I over clocked to 3.6Ghz ( not too stable , temp up at 40deg) but Wei no better. see attached.
I dont want to buy bulldozer as reports are not that flattering, most say phenom 2 is better ( $ vs power)
Any thoughts, should I go for it ?

[Irony]

Originally Posted by gmastra100

Not sure if this is the thread I need to be on, but I have a phenom II and I want to overclock , so here I am , appologies if its the wrong place.
I have a phenom x 2 3GHz Callisto 545 which I use in an unlocked 4x denab 3GHz manner, but cant get more than 3.4GHz stable in x4 mode.
There is a x6 1055T up for sale on a certain web page who might consider a part exchange.
Question, will I get more noticable difference from it ?
I over clocked to 3.6Ghz ( not too stable , temp up at 40deg) but Wei no better. see attached.
I dont want to buy bulldozer as reports are not that flattering, most say phenom 2 is better ( $ vs power)
Any thoughts, should I go for it ?

I have a 1090T, great chip. 1055 doesn't have an unlocked multiplier I dont think. It would be an ok upgrade if you aren't really interested in overclocking very high. If you want to get a massive OC though, bulldozers seem to get to 4.5ghz without much sweat.

Regarding your current overclock though, you're probably using the FSB? Because it affects the speeds of alot of things not just CPU, and hence makes it harder to stabilize. Also, CPU voltage generally needs to be raised when overclocking. Idk, maybe you already know all that.

[cdawall]

Time to wake the thread back up. Got one of those odd ball business class chips. Phenom II B97 clocks pretty damn good for the first try on it.

[eidairaman1]

Originally Posted by cdawall

Time to wake the thread back up. Got one of those odd ball business class chips. Phenom II B97 clocks pretty damn good for the first try on it.

http://img.techpowerup.org/120830/Capture005.jpg

im guessing the multiplier is locked from going higher.

otherwise it be equivalent to the 955 BE or 555 BE Unlocked to B55/955 BE spec

[cdawall]

Originally Posted by eidairaman1

im guessing the multiplier is locked from going higher.

otherwise it be equivalent to the 955 BE or 555 BE Unlocked to B55/955 BE spec

Yup that's the max multi ie a 955 non-BE. I also have fixed any temp issues I had...Just need earplugs now.

[Irony]

Originally Posted by cdawall

Yup that's the max multi ie a 955 non-BE. I also have fixed any temp issues I had...Just need earplugs now.

http://img.techpowerup.org/120830/20120830_190958.jpg

Holy LOL. I have never seen that many fans stacked around a rad lol. Isn't that a lot of stress on that first fan?

[cdawall]

Originally Posted by Irony

Holy LOL. I have never seen that many fans stacked around a rad lol. Isn't that a lot of stress on that first fan?

The clear to fans are hollow. The entire point of them is to remove the dead spot of the fans so they simply act as a shroud. As for stress its not really that heavy.

Seems to be working pretty damn well I must say.