AMD Catalyst 12.11 Beta 4 Now Available

btarunr · Oct 23, 2012, 06:42 PM

AMD rolled out two successive quick fixes to issues related to Medal of Honor: Warfighter, when running its performance-optimized Catalyst 12.11 "Never Settle" drivers. An application crash was observed when Medal of Honor: Warfighter is run on systems with Radeon HD 7000 GPUs running in CrossFire configurations, with anti-aliasing enabled at the same time. The company pulled Catalyst 12.11 Beta 3 from its websites, AMD Support and AMD GAME, replacing it with the new Beta 4.

DOWNLOAD: AMD Catalyst 12.11 Beta 4

erocker · Oct 23, 2012, 06:43 PM

I hope this fixes 2D clocks for 7 series reference cards.

brandonwh64 · Oct 23, 2012, 06:44 PM

So is this a driver we could install over our beta 3?

erocker · Oct 23, 2012, 06:45 PM

Quote:

Originally Posted by brandonwh64

So is this a driver we could install over our beta 3?

You can try!

*You're not using a 7 series card, so I don't think it's worth using these betas.

brandonwh64 · Oct 23, 2012, 06:46 PM

Ill do that right now

Boneface · Oct 23, 2012, 07:38 PM

I had that issue with one card lol!

erocker · Oct 23, 2012, 07:42 PM

Quote:

Originally Posted by erocker

I hope this fixes 2D clocks for 7 series reference cards.

The answer is no.

manofthem · Oct 23, 2012, 07:43 PM

@erocker: that sucks, was hoping for it

erocker · Oct 23, 2012, 08:17 PM

Yeah... But I don't mind too much. The performance increase I get in BF3 with these drivers is amazing. I'm seeing about a 10 fps increase all around.

the54thvoid · Oct 23, 2012, 10:11 PM

I only just got in from work in and re-installed but same clocks issue (no biggie) but Afterburner has lost my 2nd cards temp and clock monitoring again

Quick benchie on Unigine at 1050 core with 8x Anisotropic, normal tess, no AA at 1920x1080, used to be about 172, now is 179.

Had to dl these ones tho as I've preloaded MoH

erocker · Oct 23, 2012, 10:16 PM

Quote:

Originally Posted by the54thvoid

I only just got in from work in and re-installed but same clocks issue (no biggie) but Afterburner has lost my 2nd cards temp and clock monitoring again

Quick benchie on Unigine at 1050 core with 8x Anisotropic, normal tess, no AA at 1920x1080, used to be about 172, now is 179.

Had to dl these ones tho as I've preloaded MoH

Did you disable ULPS?

the54thvoid · Oct 23, 2012, 10:23 PM

No, haven't touched the registry.

I like zero-core so I will keep ULPS on. I did have an issue with no zero-core before the 12.9 drivers but 12.9 fixed zero-core for me. But, alas, 12.9 took away the temp and core monitoring from AB. Could find nothing on the web to help me out.

However, 12.11 beta 3 gave me the full monitoring ability, two cards both being monitored for temps, clocks and usage in AB (visible in my G19 display).

But, 12.11 beta 4 has set it back and it's not monitoring the 2nd cards temps or clocks. But it will monitor it's usage (useful) fans speed and fan tachometer (useless, they're under water!).

Still, I'm more than happy with the BF3 increases. A near constant 100fps+ on Kharg island with maximum fx. Simply awesome.

AlienIsGOD · Oct 23, 2012, 10:40 PM

im going to install the beta on my friends pc that I built, a 7770 roughly equaling a 6850 in BF 3 is a great improvement

STCNE · Oct 23, 2012, 11:20 PM

Quote:

Originally Posted by AlienIsGOD

im going to install the beta on my friends pc that I built, a 7770 roughly equaling a 6850 in BF 3 is a great improvement

Yeah, I traded a 6850(with a bad cooler) for a 7770. I don't feel like I downgraded anymore.

No problems with 2D clocks here, must just be with the higher end cards.

Jstn7477 · Oct 23, 2012, 11:36 PM

I don't have any problems with my 7950's clocks either (using the leaked boost BIOS that has the 925MHz 3D clock) on yesterday's drivers. However, I am sick of my card going to 300/150 in the middle of TF2, so is there anyway I can stop that? I use a 120Hz monitor so it goes down to 300/150 and a laggy 60 FPS all the time for about 20 seconds until I look at the ground and it goes back to 120 FPS. Tribes: Ascend also has this weird "rubber-banding" as well where I will be flying through the air and the speed of the graphics randomly slows down intermittently.

exodusprime1337 · Oct 24, 2012, 12:39 AM

Quote:

Originally Posted by the54thvoid

I only just got in from work in and re-installed but same clocks issue (no biggie) but Afterburner has lost my 2nd cards temp and clock monitoring again

Quick benchie on Unigine at 1050 core with 8x Anisotropic, normal tess, no AA at 1920x1080, used to be about 172, now is 179.

Had to dl these ones tho as I've preloaded MoH

I had to disable ulps again after the driver install, if you haven't found that out yet.. I think that will solve your issue with not seeing clocks in msi afterburner

erocker · Oct 24, 2012, 01:29 AM

Quote:

Originally Posted by exodusprime1337

I had to disable ulps again after the driver install, if you haven't found that out yet.. I think that will solve your issue with not seeing clocks in msi afterburner

Regedit, CTRL+F, type in "ulps" and change the two instances of Enable ULPS (in the 0001 and 0002 folders) from a 1 to 0. Restart.

TheGuruStud · Oct 24, 2012, 04:04 AM

Is no one else having the problem with screen flickering (image bouncing up and down with lines) and distortion when trying to apply ANY OC and moving the mouse/scrolling?

Left at stock settings, nothing happens. Literally. 3D clocks will never engage.
Apply OC and crap goes haywire. Start rendering in 3D and the crazy crap stops, 3D clocks engage and all is normal.

This occurs with 12.9-12.11. What a joke. ULPS has exactly zero effect.
Reverting back to 12.8 is an instant fix :| This is a gigabyte 7950 reference PCB (afaik).

erocker · Oct 24, 2012, 04:24 AM

Quote:

Originally Posted by TheGuruStud

Is no one else having the problem with screen flickering (image bouncing up and down with lines) and distortion when trying to apply ANY OC and moving the mouse/scrolling?

Left at stock settings, nothing happens. Literally. 3D clocks will never engage.
Apply OC and crap goes haywire. Start rendering in 3D and the crazy crap stops, 3D clocks engage and all is normal.

This occurs with 12.9-12.11. What a joke. ULPS has exactly zero effect.
Reverting back to 12.8 is an instant fix :| This is a gigabyte 7950 reference PCB (afaik).

You could try using ATiMan Uninstaller. I know the AMD rep on another forum suggested using it before installing the 12.9 beta's. I used version 7.0.2 and it worked great. Also, try installing the latest CAP if you haven't.

Widjaja · Oct 24, 2012, 07:31 AM

Reluctant to try these.
It appears Skyrim gets black triangles, flickering, trees popping up and then disappearing while my character stands in one spot.

If I move a couple of steps away for the area, it stops.
But then a few steps more and I will encounter another area where the same thing happens.

Tested other games with the 12.11 beta only to find Skyrim affected.
Can only assume that AMD had not realized or tested Skyrim at my low res 1440X900.

Prima.Vera · Oct 24, 2012, 08:22 AM

Are those any good for 5xxx series?? Anyone with those card installed this yet?

the54thvoid · Oct 24, 2012, 08:24 AM

Ah, IT problem solving 101.

After re-installing the beta 4's last night I had that Afterburner issue with monitoring.

This morning when i switched on PC, problem gone. If in doubt, reboot.

doh!

Prima.Vera · Oct 24, 2012, 09:10 AM

LOL. I always reboot after installing drivers...just to be safe.

TheGuruStud · Oct 24, 2012, 04:55 PM

Quote:

Originally Posted by erocker

You could try using ATiMan Uninstaller. I know the AMD rep on another forum suggested using it before installing the 12.9 beta's. I used version 7.0.2 and it worked great. Also, try installing the latest CAP if you haven't.

I wish it were that simple (I tried everything)

I could format and reinstall and it won't fix it.

Prima.Vera · Oct 27, 2012, 07:43 PM

Anyone else having problem running Dishonored with those drivers? It keep crashes the game...

Oct 23, 2012, 06:42 PM	#1
btarunr Editor & Senior Moderator Join Date: Oct 2007 Location: Hyderabad, India Posts: 14,984 (7.29/day) Thanks: 788 Thanked 12,911 Times in 5,655 Posts System Specs	AMD Catalyst 12.11 Beta 4 Now Available AMD rolled out two successive quick fixes to issues related to Medal of Honor: Warfighter, when running its performance-optimized Catalyst 12.11 "Never Settle" drivers. An application crash was observed when Medal of Honor: Warfighter is run on systems with Radeon HD 7000 GPUs running in CrossFire configurations, with anti-aliasing enabled at the same time. The company pulled Catalyst 12.11 Beta 3 from its websites, AMD Support and AMD GAME, replacing it with the new Beta 4. DOWNLOAD: AMD Catalyst 12.11 Beta 4

System Name:	Blackbox
Processor:	Intel Core i7-950
Motherboard:	Intel Extreme Series DX58OG
Cooling:	Xigmatek Aegir SD128264 with IC Diamond 24 Thermal Compound
Memory:	12GB ADATA Premier (3x 4GB) DDR3-1333 MHz
Video Card:	Palit GeForce GTX 680 JetStream 2GB outfitted with IC Diamond 24 TIM
Hard Disk:	Samsung 840 Series 250GB, Random 8 TB storage
Optical Drive:	HT-LG DVD-RW
CRT/LCD Model:	ViewSonic VX2450wm-LED
Case:	Cooler Master CM690 Window
Sound Card:	Creative SB Recon3D
PSU:	Corsair HX850W
Software:	Windows 8 Pro 64-bit

Processor:	Intel i7 3770K @ 4.6ghz 1.256v
Motherboard:	Asus Maximus V Formula
Cooling:	Water
Memory:	2x4gb Patriot Viper 2133mhz 10-11-10-25 2T 1.55v
Video Card:	Sapphire HD 7970 1125/1575 1.14v
Hard Disk:	Crucial M4 128Gb / Corsair Force 3 120Gb / Samsung 240Gb / 2Tb Seagate
Optical Drive:	None
CRT/LCD Model:	Acheiva Shimian 27" IPS 2560x1440
Case:	Corsair 500R White
Sound Card:	Onboard
PSU:	NZXT Hale90 1Kw
Software:	Windows 8 x64

Oct 23, 2012, 06:44 PM	#3
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,572 (10.00/day) Thanks: 2,149 Thanked 5,342 Times in 3,697 Posts System Specs	So is this a driver we could install over our beta 3? __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

System Name:	The StarCrunch Defender!
Processor:	I7 2600K @ 4.5ghz 1.32V
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair A70 Push/Pull
Memory:	G-Skill Ripjaws 2x4GB DDR3 1866mhz
Video Card:	Gigabyte 7970 3GB Reference Card at boost clocks
Hard Disk:	2x 500GB WD Blue Raid 0 / 1TB WD Black
Optical Drive:	Samsung DVD/R/RW SATA
CRT/LCD Model:	ViewSonic VG2227wm 1080P
Case:	NZXT Tempest 410 Elite
Sound Card:	Onboard Realtek (Azalia)
PSU:	Corsair 750TX
Software:	Windows 7 Home X64

Oct 23, 2012, 06:43 PM	#2
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,961 (12.77/day) Thanks: 2,793 Thanked 12,322 Times in 7,833 Posts System Specs	I hope this fixes 2D clocks for 7 series reference cards.

Oct 23, 2012, 06:46 PM	#5
brandonwh64 Addicted to Bacon and StarCrunches!!! Join Date: Sep 2009 Location: Chatsworth, GA Posts: 13,572 (10.00/day) Thanks: 2,149 Thanked 5,342 Times in 3,697 Posts System Specs	Ill do that right now __________________ Cruncher's: All GPU's GPU's: 7970 3GB Unlocked = 8 Threads 5770 1GB OCed = 2 Threads

Oct 23, 2012, 07:38 PM	#6
Boneface Join Date: Jan 2006 Location: Windsor, Ontario, Canada Posts: 1,335 (0.50/day) Thanks: 75 Thanked 78 Times in 44 Posts System Specs	I had that issue with one card lol!

System Name:	Bones Beast
Processor:	Intel Core i5 2500k@4.8ghz@1.4v
Motherboard:	Gigabyte Z68 X-UD3H-B3
Cooling:	Corsair H100 4x120mm fans!
Memory:	2x4gigs Corsair Vengence 1600mhz
Video Card:	Gigabyte Windforce 7970
Hard Disk:	Samsung 120gig 840s Raid 0/500gig SG/320
Optical Drive:	lg dvd burner
CRT/LCD Model:	Samsung S27A950D 27in 3D 120hz monitor
Case:	Coolermaster Haf XB
Sound Card:	Asus Zonar d1/logitech X540 5.1 Speakers
PSU:	Coolermaster GX750watt PSU
Software:	Windows 7 ultimate 64bit

Oct 23, 2012, 07:43 PM	#8
manofthem Join Date: Jan 2011 Location: WPB, FL Posts: 3,345 (3.85/day) Thanks: 2,095 Thanked 2,520 Times in 1,281 Posts System Specs	@erocker: that sucks, was hoping for it __________________ My Heatware "P.S. Why buy from Newegg...when you can buy from Sneeky!" -LiNKiN

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

Oct 23, 2012, 08:17 PM	#9
erocker Senior Moderator Join Date: Jul 2006 Location: Milwaukee, WI. Posts: 31,961 (12.77/day) Thanks: 2,793 Thanked 12,322 Times in 7,833 Posts System Specs	Yeah... But I don't mind too much. The performance increase I get in BF3 with these drivers is amazing. I'm seeing about a 10 fps increase all around.

Oct 23, 2012, 10:11 PM	#10
the54thvoid Join Date: Dec 2009 Location: Scotland Posts: 2,069 (1.64/day) Thanks: 332 Thanked 874 Times in 508 Posts System Specs	I only just got in from work in and re-installed but same clocks issue (no biggie) but Afterburner has lost my 2nd cards temp and clock monitoring again Quick benchie on Unigine at 1050 core with 8x Anisotropic, normal tess, no AA at 1920x1080, used to be about 172, now is 179. Had to dl these ones tho as I've preloaded MoH __________________ My Heatware: http://www.heatware.com/eval.php?id=75854

System Name:	Dulie.
Processor:	i7 3930k @ 4.2GHz
Motherboard:	Asus P9 X79 PRO
Cooling:	Dual Loop with 2 D5's, gpu on 120.4 rad, cpu on 120.2
Memory:	16Gb 1600MHz Corsair Vengeance
Video Card:	GTX Titan @ 1.5GHz
Hard Disk:	2x120GB SSD - Corsair Force Series 3, OCZ Vertex II
Optical Drive:	Removed for radiator
CRT/LCD Model:	Dell Ultrasharp 27" (2560x1440)
Case:	Silverstone TJ07 (modded black interior)
Sound Card:	On Board
PSU:	Seasonic Platinum 1000W
Software:	W7

Oct 23, 2012, 10:23 PM	#12
the54thvoid Join Date: Dec 2009 Location: Scotland Posts: 2,069 (1.64/day) Thanks: 332 Thanked 874 Times in 508 Posts System Specs	No, haven't touched the registry. I like zero-core so I will keep ULPS on. I did have an issue with no zero-core before the 12.9 drivers but 12.9 fixed zero-core for me. But, alas, 12.9 took away the temp and core monitoring from AB. Could find nothing on the web to help me out. However, 12.11 beta 3 gave me the full monitoring ability, two cards both being monitored for temps, clocks and usage in AB (visible in my G19 display). But, 12.11 beta 4 has set it back and it's not monitoring the 2nd cards temps or clocks. But it will monitor it's usage (useful) fans speed and fan tachometer (useless, they're under water!). Still, I'm more than happy with the BF3 increases. A near constant 100fps+ on Kharg island with maximum fx. Simply awesome. __________________ My Heatware: http://www.heatware.com/eval.php?id=75854

Oct 23, 2012, 10:40 PM	#13
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,616 (1.49/day) Thanks: 4,335 Thanked 1,115 Times in 636 Posts System Specs	im going to install the beta on my friends pc that I built, a 7770 roughly equaling a 6850 in BF 3 is a great improvement __________________ Crunching Hardware CPU: i5 3570K and i5 2400 = 8 cores GPU: 7870 (8 wu's) and 7770 (4 wu's) = 1920 GCN cores (no GPU wu's atm)

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 @ 3.4 ghz 1.17 vcore \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

System Name:	Lycanthropy
Processor:	i5 2500K
Motherboard:	ECS p67-h2a2
Memory:	8GB Muskin Radioactive Series
Video Card:	MSI R7770
Case:	Lancool K62
Sound Card:	Ultra-Fi Dac41, Vintage Sherwood amp, STAX SR-5 Headphones
PSU:	XFX 850W
Software:	Win 7 64-Bit(Tried Win8 and never going back)
Benchmarks:	Reboots in 35 seconds flat, with a standard HDD. I'm a bit of an OCD tweaker. Using less than 100GB

Oct 23, 2012, 11:36 PM	#15
Jstn7477 Join Date: Aug 2009 Location: Sarasota, Florida, USA Posts: 3,146 (2.31/day) Thanks: 389 Thanked 1,195 Times in 807 Posts System Specs	I don't have any problems with my 7950's clocks either (using the leaked boost BIOS that has the 925MHz 3D clock) on yesterday's drivers. However, I am sick of my card going to 300/150 in the middle of TF2, so is there anyway I can stop that? I use a 120Hz monitor so it goes down to 300/150 and a laggy 60 FPS all the time for about 20 seconds until I look at the ground and it goes back to 120 FPS. Tribes: Ascend also has this weird "rubber-banding" as well where I will be flying through the air and the speed of the graphics randomly slows down intermittently. __________________ Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE

System Name:	Awesomesauce \| Laptop (Toshiba A665D-S6091) \| "The Shoebox"
Processor:	Intel Core i7-3770K @ 4.3GHz/1.18v \| AMD PII Mobile X4 X920 @ 2.3GHz\|AMD E-350 APU
Motherboard:	ASRock Z77 Extreme6 \| NWQAE S1G4 (880G/SB850) \| Gigabyte E350N-USB3
Cooling:	Thermaltake Water 2.0 Performer, 2x Cougar CF-V12HB + 5 Rosewill RFA-120-RL
Memory:	G.Skill RJ-X 16GB DDR3-2000 CL11 \| Stock 2*2GB DDR3-1066 CL7 \| 4GB DDR3-1333
Video Card:	XFX DD HD7950 3GB 1175/1500 1.2v w/ Accelero Xtreme 7970 \| ATI MR 5650 1GB DDR3 @ 550/900 \| 6310 IGP
Hard Disk:	Mushkin Chronos 240GB + Seagate Green 2TB \| WD Scorpio Black 750GB \| Samsung F1 1TB
Optical Drive:	ASUS 24x SATA \| Sony Optiarc AD-7703S 8x Labelflash \| Samsung Writemaster 22x SATA
CRT/LCD Model:	ASUS VG236HE 23" 120Hz 1080p \| 16.0" 1366*768 LED laptop glossy LCD \| Samsung 940BW
Case:	NZXT Source 210 \| Toshiba A665D \| Rosewill MI-01-BK ITX "shoebox"
Sound Card:	Realtek ALC898 \| Realtek ALC269 with harman/kardon speakers \| Realtek ALC892
PSU:	Rosewill CAPSTONE 550w (80Plus Gold) \| 75W 19.5v brick \| Seasonic 350w ITX
Software:	Windows 7 Pro x64 + Ubuntu 12.10 \| Windows 8 Pro x64 (laptop)
Benchmarks:	120FPS in the games I play? :P

System Name:	obsidian is big and black--- no pun intended
Processor:	Intel i7-2700k @ 4.8Ghz 100x48 1.40v
Motherboard:	Asrock Extreme7 Gen3 z68
Cooling:	XSPC raystorm, XSPC rx360, swiftech mcp655b, XSPC dual bay res w/mcp655b mount
Memory:	8GB G.Skill sniper ddr3 1866 8,8,8,20,1t 1.55v
Video Card:	Diamond 7970 @ 1200/1675 in crossfire
Hard Disk:	1x wd velocirapter 150 for os, 2xwd caviarblack 1tb in raid 0 for everything else
Optical Drive:	samsung writemaster dvdr sata
CRT/LCD Model:	LG 27" LED 1920x1080, samsung syncmaster 2494 24" lcd
Case:	Corsair Obsidian 800D full tower(effin awsome case)
Sound Card:	onboard
PSU:	coolermaster silent pro 1000watt!!!
Software:	Windows 8 pro
Benchmarks:	i'm working on that

Oct 24, 2012, 04:04 AM	#18
TheGuruStud Join Date: Sep 2007 Location: Police/Nanny State of America Posts: 1,394 (0.67/day) Thanks: 45 Thanked 142 Times in 109 Posts System Specs	Is no one else having the problem with screen flickering (image bouncing up and down with lines) and distortion when trying to apply ANY OC and moving the mouse/scrolling? Left at stock settings, nothing happens. Literally. 3D clocks will never engage. Apply OC and crap goes haywire. Start rendering in 3D and the crazy crap stops, 3D clocks engage and all is normal. This occurs with 12.9-12.11. What a joke. ULPS has exactly zero effect. Reverting back to 12.8 is an instant fix :\| This is a gigabyte 7950 reference PCB (afaik). __________________

Processor:	OCed 8350
Motherboard:	Sabertooth R2.0
Cooling:	Mugen 2 rev B push/pull
Memory:	16GB Gskill
Video Card:	1200 MHz 7950
Hard Disk:	Kingston 3K 120s raid 0, Sammy, WDs
Optical Drive:	flashed pioneer
CRT/LCD Model:	Auria 27" 2560x1440
Case:	cooler master HAF 932
Sound Card:	X-fi Titanium HD - Onkyo HT-RC360 Receiver - BIC America custom 5.1 set up (and extra Klipsch sub)
PSU:	Corsair 850W V2
Software:	I wish I could kill myself instead of using windows (OSX can suck it too).

Oct 24, 2012, 07:31 AM	#20
Widjaja Join Date: Jun 2007 Location: Wangas, New Zealand Posts: 4,024 (1.85/day) Thanks: 242 Thanked 617 Times in 534 Posts System Specs	Reluctant to try these. It appears Skyrim gets black triangles, flickering, trees popping up and then disappearing while my character stands in one spot. If I move a couple of steps away for the area, it stops. But then a few steps more and I will encounter another area where the same thing happens. Tested other games with the 12.11 beta only to find Skyrim affected. Can only assume that AMD had not realized or tested Skyrim at my low res 1440X900.

System Name:	Darth Obsidious
Processor:	Intel i5 2500K
Motherboard:	ASUS P8Z68-V/Gen3
Cooling:	Cooler Master Hyper 212+ in Push Pull
Memory:	2X4GB Corsair Vengeance DDR3 1600
Video Card:	ASUS HD7870 Direct CU II
Hard Disk:	128GB Samsung 830 SSD, 1TB WD Black, 2TB WD Green
Optical Drive:	ASUS BC-12B1ST 12X Blu-ray Combo
CRT/LCD Model:	LG IPS234V-PN
Case:	Corsair Obsidian 650D
Sound Card:	Infrasonic Quartet
PSU:	Corsair HX650w
Software:	Windows 7 64bit and Windows XP Home
Benchmarks:	2cm mark on bench with a razor blade.

Oct 24, 2012, 08:22 AM	#21
Prima.Vera Join Date: Sep 2011 Location: Antagonia Posts: 1,367 (2.21/day) Thanks: 228 Thanked 179 Times in 120 Posts System Specs	Are those any good for 5xxx series?? Anyone with those card installed this yet? __________________ *The richest man is not he who has the most, but he who needs the least.*

System Name:	Fluffy
Processor:	Intel 486DX4-100Mhz
Memory:	16MB EDO RAM
Video Card:	S3 Vige GX2-4MB + 3Dfx VooDoo2
Hard Disk:	60GB WD
Sound Card:	Creative SB AWE 32

Oct 24, 2012, 08:24 AM	#22
the54thvoid Join Date: Dec 2009 Location: Scotland Posts: 2,069 (1.64/day) Thanks: 332 Thanked 874 Times in 508 Posts System Specs	Ah, IT problem solving 101. After re-installing the beta 4's last night I had that Afterburner issue with monitoring. This morning when i switched on PC, problem gone. If in doubt, reboot. doh! __________________ My Heatware: http://www.heatware.com/eval.php?id=75854

Oct 24, 2012, 09:10 AM	#23
Prima.Vera Join Date: Sep 2011 Location: Antagonia Posts: 1,367 (2.21/day) Thanks: 228 Thanked 179 Times in 120 Posts System Specs	LOL. I always reboot after installing drivers...just to be safe. __________________ *The richest man is not he who has the most, but he who needs the least.*

Oct 27, 2012, 07:43 PM	#25
Prima.Vera Join Date: Sep 2011 Location: Antagonia Posts: 1,367 (2.21/day) Thanks: 228 Thanked 179 Times in 120 Posts System Specs	Anyone else having problem running Dishonored with those drivers? It keep crashes the game... __________________ *The richest man is not he who has the most, but he who needs the least.*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Catalyst 12.9 Beta's available	t_ski	AMD / ATI	44	Oct 4, 2012 03:50 PM
AMD Catalyst 12.9 Beta Driver Available for Download	Cristian_25H	News	23	Sep 28, 2012 09:25 AM
AMD Catalyst 12.6 Beta and AMD Catalyst Feature Preview for Windows 8 Available	btarunr	News	20	Jun 5, 2012 03:15 PM
Catalyst Caps 12.3 - Cap 1 now available from AMD.	Stu @ MSD	AMD / ATI	1	Mar 30, 2012 12:31 AM
AMD Catalyst 12.2 WHQL Now Available	btarunr	News	22	Mar 9, 2012 02:56 AM