Project White Boy - Page 13

[H]@RD5TUFF · Oct 30, 2012, 02:35 PM

So after no sleep and a bit of thinking, I am 100% sure only one of the cables is a problem, however, this puts me in a difficult place, as I am now forced to either RMA it or consider the money I spent lost, and buy a replacement which is likely my only option for timely replacement.

Just really bothered and frustrated atm.

Wrigleyvillain · Oct 30, 2012, 02:51 PM

Can you see the actual defect? Not really clear on what is wrong with it or why it won't connect properly exactly.

As for my radiator, as I said earlier, I want to install my blu ray burner so can't fit a dual 120MM or 240. Frankly, never thought I'd be buying one that wasn't at least a 120x2.

I had my own annoyance last night but it was my dumb ass fault. I forgot to mount my bay res in it's proper orientation with screws before re-doing my tubing in my P55 rig and I ending up cutting them about an inch too short. So the res is not flush with the front case panel once installed. Now I have to buy more and re-do the whole loop. And my rad already shipped so could not include with that order and shipping cost.

[H]@RD5TUFF · Oct 30, 2012, 06:07 PM

Quote:

Originally Posted by Wrigleyvillain

Can you see the actual defect? Not really clear on what is wrong with it or why it won't connect properly exactly.

The very base of the molex is too small for the PSU molex to fit into it , and when I force it the wire pops out of the molex.

PopcornMachine · Oct 30, 2012, 06:30 PM

I recently got some Bitfenix extension cables for PCI-E and 8-pin EPS.

Didn't have a problem with the PCI-E, but almost gave up on the EPS as one of my 4-pin connectors just would not go in. After a while of pushing real hard it finally connected. Not going to remove it for fear of not getting it back on.

Interesting that you are having a similar problem.

Wrigleyvillain · Oct 30, 2012, 08:09 PM

Hmm...

Random Murderer · Oct 30, 2012, 08:11 PM

Quote:

Originally Posted by PopcornMachine

I recently got some Bitfenix extension cables for PCI-E and 8-pin EPS.

Didn't have a problem with the PCI-E, but almost gave up on the EPS as one of my 4-pin connectors just would not go in. After a while of pushing real hard it finally connected. Not going to remove it for fear of not getting it back on.

Interesting that you are having a similar problem.

Cold Storm had this issue with one of his BitFenix extensions, not sure which though.

PopcornMachine · Oct 30, 2012, 10:09 PM

I should add that I did use a small screwdriver to try and tweak the metal connectors on my source plug or the extension plug, not sure which.

Not sure if that helped or not, it just finally went in.

Cold Storm · Oct 30, 2012, 10:29 PM

Quote:

Originally Posted by Random Murderer

Cold Storm had this issue with one of his BitFenix extensions, not sure which though.

The 24 pin was a pain the the A$$ to do. The white ones.. the black and blue ones I got haven't had a issue what so ever.. White, fought with me for an half an hour one day.

PopcornMachine · Oct 30, 2012, 10:33 PM

^ Mine are black. Seems to random manufacturing problem.

[H]@RD5TUFF · Oct 31, 2012, 12:45 AM

So it would seem, I still haven't decided if I want to try again ot try my luck with some other connectors.

[H]@RD5TUFF · Oct 31, 2012, 03:11 AM

I think I am going to try my luck again from a different retailer, and try these again in the mean time, and see if I can get them to work. Also I am considering wrapping the video card to white it out.

[H]@RD5TUFF · Oct 31, 2012, 07:10 AM

So I recently traded on the forums for a 5750, for my brother, whom was rocking a GTX 430 so this is a sizable upgrade for him.

Before I start yes, it's dirty, yes it's filthy and yes it's dusty! I plan to blow it out tomorrow and do some basic cable management.

So here is before the new card.

here is the new card installed

More to come on both projects . . .

[H]@RD5TUFF · Oct 31, 2012, 11:40 AM

Well like 0 sleep again, and I decided to pull the trigger on some more parts.

Wrigleyvillain · Oct 31, 2012, 03:26 PM

Like what? Curious what you still need/could use.

t_ski · Oct 31, 2012, 03:30 PM

Every time I see the thread title I think of this

[H]@RD5TUFF · Oct 31, 2012, 03:52 PM

Quote:

Originally Posted by Wrigleyvillain

Like what? Curious what you still need/could use.

Well the windows still need to go in, I bought some paint, and I'm liking the the front panel less and less as time goes by. Also I'm still waiting for Bit Fenix to release it's white version of the recon fan controller. As well as some other touches and details.

Quote:

Originally Posted by t_ski

Every time I see the thread title I think of this

Could you have possibly found a lower quality grainier video.

t_ski · Oct 31, 2012, 03:57 PM

I was looking, but that's the worst one I could find. Sorry

[H]@RD5TUFF · Oct 31, 2012, 04:00 PM

Quote:

Originally Posted by t_ski

I was looking, but that's the worst one I could find. Sorry

What matters is you tried.

[H]@RD5TUFF · Oct 31, 2012, 04:10 PM

Also my laser cutting guy bailed on me, so I guess I'll be putting the windows in ye olde fashioned way.

Wrigleyvillain · Oct 31, 2012, 06:26 PM

What would be the "old fashioned way" exactly? Dremel? Perhaps I have already made it obvious that I really have no experience with such things as it stands right now. I know there are various methods detailed on certain forums but haven't checked out myself.

t_ski · Oct 31, 2012, 07:05 PM

You could also look up waterjet cutters in the area. I did a Star Wars case with an Imperial logo on the side, and I got a local guy to do it for ~$20.

[H]@RD5TUFF · Oct 31, 2012, 08:16 PM

Quote:

Originally Posted by Wrigleyvillain

What would be the "old fashioned way" exactly? Dremel? Perhaps I have already made it obvious that I really have no experience with such things as it stands right now. I know there are various methods detailed on certain forums but haven't checked out myself.

A dremel.

Quote:

Originally Posted by t_ski

You could also look up waterjet cutters in the area. I did a Star Wars case with an Imperial logo on the side, and I got a local guy to do it for ~$20.

But I do know a friend who own a small flow jet . .. .. hmmm

Wrigleyvillain · Nov 3, 2012, 03:56 PM

Well I've run into my first big problem. With the 120mm rad on top and it's fan inside the case as well the optical drive cannot slide all the way back with it's cables installed. Don't think a thinner fan would be thin enough (besides the lost performance). Really don't want to the fan outside on top either; not quite sure what to do at this point. Putting the rad on the rear has it's own set of issues due to space and proximity to the board/block as well (but that still may be able to work with some further thought and planning).

Still can get it up and running today though.

Athlonite · Nov 3, 2012, 10:03 PM

@wrigleyvillian remind me what case you have so's I can google some images to get an idea of your problem

[H] that's gotta suck about the cable and the cutting guy bailing meanwhile on a lighter note those fans look bloody good

Wrigleyvillain · Nov 4, 2012, 01:19 AM

Prodigy same as what this thread is about (and why I'm posting here essentially...don't want my own build log).

Got a single 120mm rad as you can't fit a full 2x120 on top unless you want to remove optical drive bay. But the fan I have on the single rad doesn't leave enough room for the sata cables on my blu ray burner.

I gotta look at other build logs I guess.

Oct 30, 2012, 02:35 PM	#301
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	So after no sleep and a bit of thinking, I am 100% sure only one of the cables is a problem, however, this puts me in a difficult place, as I am now forced to either RMA it or consider the money I spent lost, and buy a replacement which is likely my only option for timely replacement. Just really bothered and frustrated atm. __________________ Stuff 4 Sale! Heat Ware ebay

System Name:	White Boy
Processor:	Core i7 3770k @4.6 Ghz
Motherboard:	ASUS P8Z77-I Deluxe
Cooling:	CORSAIR H100
Memory:	CORSAIR Vengeance 16GB @ 2177
Video Card:	EVGA GTX 680 CLASSIEFIED @ 1250 Core
Hard Disk:	2 Samsung 830 256 GB (Raid 0) 1 Hitachi 4 TB
Optical Drive:	none
CRT/LCD Model:	1 Dell 30U11 30"
Case:	BIT FENIX Prodigy
Sound Card:	none
PSU:	SeaSonic X750 Gold 750W Modular
Software:	Windows Pro 7 64 bit \|\| Ubuntu 64 Bit
Benchmarks:	2017 Unigine Heaven :: P37239 3D Mark Vantage

Oct 30, 2012, 02:51 PM	#302
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	Can you see the actual defect? Not really clear on what is wrong with it or why it won't connect properly exactly. As for my radiator, as I said earlier, I want to install my blu ray burner so can't fit a dual 120MM or 240. Frankly, never thought I'd be buying one that wasn't at least a 120x2. I had my own annoyance last night but it was my dumb ass fault. I forgot to mount my bay res in it's proper orientation with screws before re-doing my tubing in my P55 rig and I ending up cutting them about an inch too short. So the res is not flush with the front case panel once installed. Now I have to buy more and re-do the whole loop. And my rad already shipped so could not include with that order and shipping cost. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

System Name:	DarkStar
Processor:	i5 3570K
Motherboard:	Asrock Z77E-ITX
Cooling:	Apogee HD White/AC Nexxos 120/XSPC H2O 750
Memory:	8GB Samsung Green 1600
Video Card:	MSI HD 7950 TF3
Hard Disk:	OCZ Agility 3 240GB
Optical Drive:	Asus Blu Ray burner
CRT/LCD Model:	23" Apple Cinema Display HD Aluminum
Case:	Bit Fenix Prodigy (Yang)
PSU:	NZXT Hale82 650W
Software:	Windows 7 x64

System Name:	White Boy
Processor:	Core i7 3770k @4.6 Ghz
Motherboard:	ASUS P8Z77-I Deluxe
Cooling:	CORSAIR H100
Memory:	CORSAIR Vengeance 16GB @ 2177
Video Card:	EVGA GTX 680 CLASSIEFIED @ 1250 Core
Hard Disk:	2 Samsung 830 256 GB (Raid 0) 1 Hitachi 4 TB
Optical Drive:	none
CRT/LCD Model:	1 Dell 30U11 30"
Case:	BIT FENIX Prodigy
Sound Card:	none
PSU:	SeaSonic X750 Gold 750W Modular
Software:	Windows Pro 7 64 bit \|\| Ubuntu 64 Bit
Benchmarks:	2017 Unigine Heaven :: P37239 3D Mark Vantage

Oct 30, 2012, 06:30 PM	#304
PopcornMachine Join Date: Aug 2009 Location: Los Angeles/Orange County CA Posts: 1,144 (0.82/day) Thanks: 2,027 Thanked 383 Times in 308 Posts System Specs	I recently got some Bitfenix extension cables for PCI-E and 8-pin EPS. Didn't have a problem with the PCI-E, but almost gave up on the EPS as one of my 4-pin connectors just would not go in. After a while of pushing real hard it finally connected. Not going to remove it for fear of not getting it back on. Interesting that you are having a similar problem.

System Name:	Green-Blooded Vulcan
Processor:	I5 2500K @ 4.6 GHz
Motherboard:	Asus Maximus Gene-Z
Cooling:	XSPC Rasa 750 RS240 Kit & EK 6970 Water Block
Memory:	G.Skill 8GB DDR3 1600
Video Card:	Sapphire HD 6950 (900/1400)
Hard Disk:	Samsung Spinpoint F3 1TB
Case:	NZXT Vulcan
Sound Card:	On Board
PSU:	CORSAIR 650HX
Software:	Win 7 64-bit

Oct 30, 2012, 08:09 PM	#305
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	Hmm... __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

System Name:	Shut up and take my money! \| Fatal Error
Processor:	Core i7 3820 @ 4.9GHz \| AMD FX-8350
Motherboard:	Asus ROG Rampage IV Extreme \| Gigabyte GA-990FXA-UD5
Cooling:	Corsair H100i \| Stock for now
Memory:	4x 4GB Samsung 30nm LP HYK0 DDR3-1600 @ 2400 1T \| G.Skill Ripjaws X 2x 4GB 1866 Cas 8
Video Card:	2x AMD HD7970 flashed to XFX Black Editions, EVGA GTS250 for Physx \| AMD HD7970
Hard Disk:	Samsung SSD 830 256GB \| Too many, lol.
CRT/LCD Model:	In Limbo \| HP w2207h 1680x1050
Case:	Silverstone Kublai 04 \| Chenming 601ae-BLU
Sound Card:	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650
PSU:	Cooler Master Silent Pro Gold 1200w \| Corsair CX750M
Software:	Win 7 64
Benchmarks:	9001 BungholioMarks, "Bitchin' Fast"

Oct 30, 2012, 10:09 PM	#307
PopcornMachine Join Date: Aug 2009 Location: Los Angeles/Orange County CA Posts: 1,144 (0.82/day) Thanks: 2,027 Thanked 383 Times in 308 Posts System Specs	I should add that I did use a small screwdriver to try and tweak the metal connectors on my source plug or the extension plug, not sure which. Not sure if that helped or not, it just finally went in.

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

Oct 30, 2012, 10:33 PM	#309
PopcornMachine Join Date: Aug 2009 Location: Los Angeles/Orange County CA Posts: 1,144 (0.82/day) Thanks: 2,027 Thanked 383 Times in 308 Posts System Specs	^ Mine are black. Seems to random manufacturing problem.

Oct 31, 2012, 12:45 AM	#310
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	So it would seem, I still haven't decided if I want to try again ot try my luck with some other connectors. __________________ Stuff 4 Sale! Heat Ware ebay

Oct 31, 2012, 03:11 AM	#311
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	I think I am going to try my luck again from a different retailer, and try these again in the mean time, and see if I can get them to work. Also I am considering wrapping the video card to white it out. __________________ Stuff 4 Sale! Heat Ware ebay

Oct 31, 2012, 07:10 AM	#312
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	side project So I recently traded on the forums for a 5750, for my brother, whom was rocking a GTX 430 so this is a sizable upgrade for him. Before I start yes, it's dirty, yes it's filthy and yes it's dusty! I plan to blow it out tomorrow and do some basic cable management. So here is before the new card. here is the new card installed More to come on both projects . . . __________________ Stuff 4 Sale! Heat Ware ebay

Oct 31, 2012, 11:40 AM	#313
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	Well like 0 sleep again, and I decided to pull the trigger on some more parts. __________________ Stuff 4 Sale! Heat Ware ebay

Oct 31, 2012, 03:26 PM	#314
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	Like what? Curious what you still need/could use. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

Oct 31, 2012, 03:30 PM	#315
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,893 (3.39/day) Thanks: 3,094 Thanked 3,349 Times in 2,552 Posts System Specs	Every time I see the thread title I think of this __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

Oct 31, 2012, 03:57 PM	#317
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,893 (3.39/day) Thanks: 3,094 Thanked 3,349 Times in 2,552 Posts System Specs	I was looking, but that's the worst one I could find. Sorry __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

Oct 31, 2012, 04:10 PM	#319
[H]@RD5TUFF Eligible for custom title Join Date: Nov 2009 Location: San Diego, CA Posts: 5,595 (4.26/day) Thanks: 1,825 Thanked 1,711 Times in 1,432 Posts System Specs	Also my laser cutting guy bailed on me, so I guess I'll be putting the windows in ye olde fashioned way. __________________ Stuff 4 Sale! Heat Ware ebay

Oct 31, 2012, 06:26 PM	#320
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	What would be the "old fashioned way" exactly? Dremel? Perhaps I have already made it obvious that I really have no experience with such things as it stands right now. I know there are various methods detailed on certain forums but haven't checked out myself. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

Oct 31, 2012, 07:05 PM	#321
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,893 (3.39/day) Thanks: 3,094 Thanked 3,349 Times in 2,552 Posts System Specs	You could also look up waterjet cutters in the area. I did a Star Wars case with an Imperial logo on the side, and I got a local guy to do it for ~$20. __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

Nov 3, 2012, 03:56 PM	#323
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	Well I've run into my first big problem. With the 120mm rad on top and it's fan inside the case as well the optical drive cannot slide all the way back with it's cables installed. Don't think a thinner fan would be thin enough (besides the lost performance). Really don't want to the fan outside on top either; not quite sure what to do at this point. Putting the rad on the rear has it's own set of issues due to space and proximity to the board/block as well (but that still may be able to work with some further thought and planning). Still can get it up and running today though. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper

Nov 3, 2012, 10:03 PM	#324
Athlonite Join Date: Jan 2010 Location: Napier, New Zealand Posts: 1,393 (1.13/day) Thanks: 286 Thanked 443 Times in 347 Posts System Specs	@wrigleyvillian remind me what case you have so's I can google some images to get an idea of your problem [H] that's gotta suck about the cable and the cutting guy bailing meanwhile on a lighter note those fans look bloody good __________________

System Name:	Xtreme PC's AMDx4
Processor:	AMD Phenom II x4 965BE @ 3.41GHz NB/HT @ 2.4GHz
Motherboard:	Asus Crosshair IV Formula
Cooling:	ThermoLab Baram 1x 120mm SS Air Penartrator 1x SS generic case fan
Memory:	8GB Corsair Vengence LP 1600MHz 9-9-9-24CR1
Video Card:	Sapphire Radeon HD7850 2GB 920/1250MHz
Hard Disk:	2x Samsung HD501IJ Raid0 boot / 1x Samsung HD501IJ + 1x WD 250GB storage
Optical Drive:	1xSATA Pioneer DVR212S 18x
CRT/LCD Model:	Alienware OptX AW2210 22" LCD 1920x1080p
Case:	SilverStone Raven RV02B-W + 3x SS AP181
Sound Card:	Creative SB X-Fi Xtreme PCIe + Pioneer VSX-D457 amp
PSU:	SilverStone ST75F-P Modular 750W
Software:	Windows 7 X64 RTM
Benchmarks:	it sucks much

Nov 4, 2012, 01:19 AM	#325
Wrigleyvillain Join Date: Oct 2007 Location: Chicago Posts: 4,552 (2.19/day) Thanks: 1,539 Thanked 1,595 Times in 1,136 Posts System Specs	Prodigy same as what this thread is about (and why I'm posting here essentially...don't want my own build log). Got a single 120mm rad as you can't fit a full 2x120 on top unless you want to remove optical drive bay. But the fan I have on the single rad doesn't leave enough room for the sata cables on my blu ray burner. I gotta look at other build logs I guess. __________________ “i dont care what consoles have they dont have mouse and keyboard” -crazyeyesreaper Last edited by Wrigleyvillain; Nov 4, 2012 at 05:40 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Case Gallery] PROJECT: WHITE	Squadd	Case Mod Gallery	6	Aug 1, 2012 09:44 AM
[Case Gallery] Project White	alain-s	Case Mod Gallery	23	Mar 6, 2012 03:29 PM
Boy or Girl?	HiddenStupid	Games	4	Sep 27, 2007 11:19 AM