![]() |
|
|
#15926 |
![]() Join Date: Oct 2007
Location: Nelson B.C. Canada
Posts: 3,731 (1.81/day)
Thanks: 283
Thanked 750 Times in 516 Posts
|
Life is never fair. I wanted that 2nd 480 so bad. Waited many years for sli 4880s while using my sli 285s... finally I get one, now just one more.... all stock sold out.... now daddy needs a 680/ 670... bah.... for xmas
__________________
Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260 |
|
|
|
| The Following User Says Thank You to johnspack For This Useful Post: |
|
|
#15927 |
![]() Join Date: May 2011
Location: Connecticut
Posts: 345 (0.46/day)
Thanks: 1,217
Thanked 727 Times in 232 Posts
|
|
|
|
|
|
|
#15928 |
![]() Join Date: Oct 2010
Location: Quebec city, canada. +30 july to -30 in january!
Posts: 500 (0.53/day)
Thanks: 445
Thanked 235 Times in 153 Posts
|
The board boots ok with one card in the first pci-e slot. Anything other than that (and believe me i've tried numerous cards and/or jumpers configuration) equals no boot. Hangs at B8 iirc.
__________________
CPU-Z validation sig pics temporarily blocked |
|
|
|
|
|
#15929 |
![]() Join Date: May 2011
Location: Connecticut
Posts: 345 (0.46/day)
Thanks: 1,217
Thanked 727 Times in 232 Posts
|
Did you try to plug in the 6 pin power for the pci express slots? Are the red lights on below each pci express slot?
|
|
|
|
|
|
#15930 |
![]() Join Date: Oct 2010
Location: Quebec city, canada. +30 july to -30 in january!
Posts: 500 (0.53/day)
Thanks: 445
Thanked 235 Times in 153 Posts
|
Each red led under the pci-e slot did light up when a card was installed. Did plug the other two 6 pin in addition to EPS 8 pin. A second or two of post, then it hangs. Tried stock clocks, 5 different cards. Each works fine alone in slot 1, add anyone into any other slot. Again,
__________________
CPU-Z validation sig pics temporarily blocked |
|
|
|
|
|
#15931 |
![]() Join Date: May 2011
Location: Connecticut
Posts: 345 (0.46/day)
Thanks: 1,217
Thanked 727 Times in 232 Posts
|
There's a third 6 pin just above the first PC express slot, below and to the left of the CPU 8 and 6 pin connectors. That one is for the PC express slots. The red leds are always suppose to be on even without a card in, unless it's disabled.
|
|
|
|
|
|
#15932 |
|
F@H Mod & 4P Enthusiust
Join Date: Aug 2007
Location: Tallahassee, FL. U.S.A.
Posts: 4,047 (1.91/day)
Thanks: 3,379
Thanked 2,907 Times in 1,474 Posts
|
And I thought my SuperMicro H8QGL-IF+ mobo's were complicated. WTF, Is there enough 6-pins on that board?
__________________
“I'll finally be able to drool over 8 gpu in one rig... And get sued by my wallet for violent physical damage...” -Feanor
|
|
|
|
|
|
#15933 |
|
F@H&WCG addict
Join Date: May 2007
Location: Newark ohio
Posts: 9,916 (4.48/day)
Thanks: 3,158
Thanked 2,215 Times in 1,685 Posts
|
Has anyone been able to get a non fermi GPU to fold in the same rig as a fermi GPU?
I have been trying but can't figure it out. I'm trying to fold on a gtx460 and a 8800gts g80
__________________
![]() crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come |
|
|
|
|
|
#15934 |
|
WCG Team Captain
Join Date: Nov 2007
Location: Miami, Florida
Posts: 23,896 (11.91/day)
Thanks: 15,156
Thanked 12,315 Times in 7,779 Posts
|
How well do 6850's fold fellas?
|
|
|
|
|
|
#15935 | |
![]() Join Date: Jan 2010
Location: Napier, New Zealand
Posts: 1,386 (1.14/day)
Thanks: 283
Thanked 441 Times in 345 Posts
|
Quote:
Intel® TurboMode Tech Select Enabled to use the Turbo Mode to boost system performance. The options are Enabled and Disabled.
__________________
|
|
|
|
|
|
|
#15936 |
|
WCG Team Assistant
Join Date: Sep 2009
Location: North Carolina, US
Posts: 10,676 (7.92/day)
Thanks: 8,254
Thanked 9,351 Times in 4,267 Posts
|
According to Buck it doesn't work well. For that reason, I passed up a G92 card a couple months back...
__________________
Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4
|
|
|
|
|
|
#15937 | |
|
F@H&WCG addict
Join Date: May 2007
Location: Newark ohio
Posts: 9,916 (4.48/day)
Thanks: 3,158
Thanked 2,215 Times in 1,685 Posts
|
Quote:
Even if it doesn't work well, is it possible to do at all?
__________________
![]() crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come |
|
|
|
|
|
|
#15938 | |
|
WCG Team Assistant
Join Date: Sep 2009
Location: North Carolina, US
Posts: 10,676 (7.92/day)
Thanks: 8,254
Thanked 9,351 Times in 4,267 Posts
|
Quote:
EDIT: I have the GTX470s up and folding P8057s
__________________
Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4
Last edited by [Ion]; Nov 21, 2012 at 03:38 AM. |
|
|
|
|
| The Following 2 Users Say Thank You to [Ion] For This Useful Post: |
|
|
#15939 |
|
F@H Mod & 4P Enthusiust
Join Date: Aug 2007
Location: Tallahassee, FL. U.S.A.
Posts: 4,047 (1.91/day)
Thanks: 3,379
Thanked 2,907 Times in 1,474 Posts
|
G80 cards will not fold with GF100/GF104. I do not know why, but there is a conflict between the clients. It's one of those weird F@H things.
__________________
“I'll finally be able to drool over 8 gpu in one rig... And get sued by my wallet for violent physical damage...” -Feanor
|
|
|
|
| The Following User Says Thank You to BUCK NASTY For This Useful Post: |
|
|
#15940 | |
|
F@H&WCG addict
Join Date: May 2007
Location: Newark ohio
Posts: 9,916 (4.48/day)
Thanks: 3,158
Thanked 2,215 Times in 1,685 Posts
|
Quote:
![]() can a 8600GT GPU2 client fold with a gf100/gf104 or is it all nonfermi Nividia GPUs cant fold in the same system?
__________________
![]() crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come |
|
|
|
|
|
|
#15941 | |
|
WCG Team Assistant
Join Date: Sep 2009
Location: North Carolina, US
Posts: 10,676 (7.92/day)
Thanks: 8,254
Thanked 9,351 Times in 4,267 Posts
|
Quote:
It's looking like GPU folding won't be something I can sustain when I'm actually in the dorm. With the fans on the GTX470s at 75%, they were both pushing nearly 110C. With the fans at 100%, it's a more manageable just-under-85C. But the noise of the fans like this is unbelievable.
__________________
Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4
|
|
|
|
|
|
|
#15942 | |
|
F@H&WCG addict
Join Date: May 2007
Location: Newark ohio
Posts: 9,916 (4.48/day)
Thanks: 3,158
Thanked 2,215 Times in 1,685 Posts
|
Quote:
also i know its a gtx460 not a gtx470 but just to rub it in....(not sure why it shows GPU MHZ change,as they have been at 750 for 2 days stright now) also my actual fan speed doesn't show on there, as its controlled by a 3pin on the mobo but its running at 1200rpms and can't even hear it over my xiggy fan thats running ~1k rpm
__________________
![]() crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come |
|
|
|
|
|
|
#15943 |
![]() Join Date: Oct 2007
Location: Nelson B.C. Canada
Posts: 3,731 (1.81/day)
Thanks: 283
Thanked 750 Times in 516 Posts
|
No. Just will not. Bummer.
__________________
Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260 |
|
|
|
| The Following User Says Thank You to johnspack For This Useful Post: |
|
|
#15944 |
![]() Join Date: Aug 2009
Location: Sarasota, Florida, USA
Posts: 3,145 (2.31/day)
Thanks: 389
Thanked 1,195 Times in 807 Posts
|
Thank you Buck for PMing me details on the QRB WUs the other day. I set up my P55 machine (running 3x 460s) and it's reading 130K PPD. One of the cards is working on a huge 16975pt 8057 WU while the other two are doing 2387pt 8054s. Didn't get to my other clients yet but I hope to get at least the other 470, 465 and 460 on the betas when I get my computers settled again.
__________________
Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE |
|
|
|
| The Following User Says Thank You to Jstn7477 For This Useful Post: |
|
|
#15945 |
|
F@H&WCG addict
Join Date: May 2007
Location: Newark ohio
Posts: 9,916 (4.48/day)
Thanks: 3,158
Thanked 2,215 Times in 1,685 Posts
|
how are you getting so many points from a gtx460 jstn? I am only getting about 9k ppd from mine.
I assume i am missing something i need to setup to get the WU's that you are gettting. Would you mind PMing me(you or anyone that can help) with details of the setup or a link to giving info on how to do it?
__________________
![]() crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come |
|
|
|
|
|
#15946 | |
![]() Join Date: Aug 2009
Location: Sarasota, Florida, USA
Posts: 3,145 (2.31/day)
Thanks: 389
Thanked 1,195 Times in 807 Posts
|
Dunno if the PM I just sent went through, but here's the info for all:
Quote:
__________________
Intel Crunchers (27 threads): 2x 3770K 4.3G (14t), 2600K 4G (7t), X3210 (3t), P-M 735A, P4 HT 3G AMD Crunchers (11 cores):1100T 3.6G (3t), 1045T 3.4G (2t), X3 8550 2.5G, X2 4200+, T64 ML-37 AMD Folders (6272 GCN cores): 2x 7950 1125/1475, 7970 1150/1650, 7770 1100/1200 NV Folders (2336 GF10x + 1344 GK104 cores):GTX 470 & 465 720/1715, 4x 460 768MB 825/2000, GTS 450, 660Ti 1228/6000 HEATWARE |
|
|
|
|
| The Following User Says Thank You to Jstn7477 For This Useful Post: |
|
|
#15947 |
|
WCG Team Assistant
Join Date: Sep 2009
Location: North Carolina, US
Posts: 10,676 (7.92/day)
Thanks: 8,254
Thanked 9,351 Times in 4,267 Posts
|
Well, it looks like the 2 GTX470s pull about 150k PPD or so. A bit less than I was expecting, but still awesome. I managed to get in 3 WUs (~45k points) before either power was cut or the RAs unplugged everything (all of my remote rigs were off when I woke up this morning).
__________________
Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4
|
|
|
|
|
|
#15948 |
|
Eligible for custom title
|
I may have to break down and buy a 580 for a system or two.
I added about 20 cores today to SMP. Will add another 12 next week.
__________________
“it would have been perfect....its got trains and the line"tech your kids not to do what iv done"(or similar) because i had obviously done something to warrent 2 e-thugs to come 4000miles out of their way and kill me.” -Solaris17 “yeah i failed. i noticed the "coming soon" part after i posted.” -Mussels
“people are just stupid.” -W1zzard
Yes I am evil, yes you can have some.
|
|
|
|
| The Following User Says Thank You to Steevo For This Useful Post: |
|
|
#15949 | |
![]() Join Date: Jul 2008
Location: Portland, OR USA
Posts: 2,143 (1.20/day)
Thanks: 1,559
Thanked 884 Times in 628 Posts
|
Quote:
__________________
I got this because I am a fan of the simplistic sleek look of a computer case that doesn't look like Optimus Prime just threw up on my desk with enough LED's to land a commercial airliner. review P280 Newegg.com |
|
|
|
|
|
|
#15950 |
|
WCG Team Assistant
Join Date: Sep 2009
Location: North Carolina, US
Posts: 10,676 (7.92/day)
Thanks: 8,254
Thanked 9,351 Times in 4,267 Posts
|
Well, the systems have gone offline now--I'll check on Sunday.
__________________
Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4
|
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|