Overclocking a FX 6100 Six-Core Black Edition CPU, 3.30 GHz

jgunning · Jul 11, 2012, 02:37 AM

Has anyone done some overclocking for their FX 6100 Six-Core Black Edition 3.30GHz yet?
Thinking of doing mine and interested how far others have taken their overclocking for this cpu =)

Norton · Jul 11, 2012, 02:42 AM

Quote:

Originally Posted by jgunning

Has anyone done some overclocking for their FX 6100 Six-Core Black Edition 3.30GHz yet?
Thinking of doing mine and interested how far others have taken their overclocking for this cpu =)

You should be able to easily get 3.8/4.0 Turbo by just setting your multipliers to 19x and 20x and leaving everything else in auto... just make sure you have a good cpu cooler

Check this thread out for more info (FX-overcloclockers club):
http://www.techpowerup.com/forums/sh...d.php?t=153443

jgunning · Jul 11, 2012, 03:46 AM

Thanks!I thought about 3.8ghz would be a good starting point. Will go from there =)

jgunning · Jul 11, 2012, 03:49 AM

What temps could I run this cpu at safely..?

gopal · Jul 12, 2012, 11:10 AM

Quote:

Originally Posted by jgunning

What temps could I run this cpu at safely..?

55C idle
70C load

I can even get my E5300 at 4.6 Ghz from 2.6 but at then it will be at 90+C which is danger!
So i stick at 3.4 or 3.8 max i will suggest first try a small boost then get bigger ones!

jgunning · Jul 12, 2012, 11:17 AM

Ok.so where do you guys suggest I start?
For someone who is new to overclocking...?

gopal · Jul 12, 2012, 11:27 AM

Quote:

Originally Posted by jgunning

Ok.so where do you guys suggest I start?
For someone who is new to overclocking...?

First I will suggest to read the Stickys in this section they helped me alot!

And after reading them try ocing your CPU!

If you get any Problems Report it here!
We will help you out!

gopal · Jul 12, 2012, 11:31 AM

you can turbo boost it to 3.9 so i will suggest to go to 4.0Ghz and play games and run benchmarks and if it works well then go to 4.1 and repeat the same task as before and this time we will get a bigger one to 4.3 and test and see the temps also!

If you Crash Then Restart and try again!

You will thinking why i am not added oc in my System Specs!
Answer: Well i only oc when i play games! like Portal 2 and Crysis!

And the result i get is:
Before ocing
Portal 2 : 8 fps at minimum settings
Crysis : Can't even play without ocing!
After ocing
Portal 2 15-21 fps
Crysis: 10-12 fps*(which is not playable)

jgunning · Jul 13, 2012, 01:41 AM

Quote:

Originally Posted by gopal

First I will suggest to read the Stickys in this section they helped me alot!

And after reading them try ocing your CPU!

If you get any Problems Report it here!
We will help you out!

The stickys?? :\

Norton · Jul 13, 2012, 01:48 AM

Quote:

Originally Posted by jgunning

The stickys?? :\

The threads in the top of a forum section that are kept on page 1 (i.e. "stickied") regardless of the post history.

Examples from the section that may help you:
http://www.techpowerup.com/forums/forumdisplay.php?f=13

lindy · Jul 13, 2012, 02:08 AM

Quote:

Originally Posted by jgunning

What temps could I run this cpu at safely..?

AMD states the max temp. for the FX chips is 61deg. C, but admits that there is a good safety margin built into that number.

pantherx12 · Jul 13, 2012, 03:36 AM

Quote:

Originally Posted by lindy

AMD states the max temp. for the FX chips is 61deg. C, but admits that there is a good safety margin built into that number.

The 6 and 4 core ones are good for 70c

gopal · Jul 13, 2012, 10:01 AM

Well i oced my P4 631 to 3.3GHz which is very difficult !
So 0.3 GHz increase in that old CPU so you can get 4.5 Ghz easily

EDIT: THE TEMPS ARE AT 41C at idle(which is normal)the same temps without oc too!
THE TEMPS ARE AT 48-65C at 95%+ load

The benchmark used BONIC MANAGER(allowed to use 100% cpu) + 1080p video playing at the same time + internet explorer 9

I used SetFSB 2.2.134.98

jgunning · Nov 21, 2012, 03:27 AM

Quote:

Originally Posted by Norton

You should be able to easily get 3.8/4.0 Turbo by just setting your multipliers to 19x and 20x and leaving everything else in auto... just make sure you have a good cpu cooler

Check this thread out for more info (FX-overcloclockers club):
http://www.techpowerup.com/forums/sh...d.php?t=153443

I think I will start with this. =) Have been away and then too busy to get back into overclocking but I just re-read over this thread and Im going to give it a go!

thanks for all your help guys!

Norton · Nov 21, 2012, 03:47 AM

I run mine @ 3.6Ghz (CnQ off, Turbo off) all cores at 100% load for crunching- has been running 24/7 for around 6 months straight now w/o issues. I could run at 3.8 for other things (gaming, etc..) but for crunching it's best to back off from a gaming grade clock for overall stability.

It's using a Xig Gaia with a single fan and temps have been fine

jgunning · Nov 21, 2012, 08:41 PM

Quote:

Originally Posted by Norton

I run mine @ 3.6Ghz (CnQ off, Turbo off) all cores at 100% load for crunching- has been running 24/7 for around 6 months straight now w/o issues. I could run at 3.8 for other things (gaming, etc..) but for crunching it's best to back off from a gaming grade clock for overall stability.

It's using a Xig Gaia with a single fan and temps have been fine

So you think I should just start with the multipliers..? I would be happy if it were running at 3.8 with good temps. and if i just run the multipliers up I have to increase the voltage accordingly yes? Feel like such a noob..

Norton · Nov 21, 2012, 09:28 PM

Quote:

Originally Posted by jgunning

So you think I should just start with the multipliers..? I would be happy if it were running at 3.8 with good temps. and if i just run the multipliers up I have to increase the voltage accordingly yes? Feel like such a noob..

Should work fine just by setting the multipliers 19x/20x Turbo all else in Auto. I was just stating the clocks I used and why

Just keep an eye on/report back on the voltage @ load in auto (you may be able to adjust voltage a bit from the auto settings)

jgunning · Nov 21, 2012, 11:08 PM

Quote:

Originally Posted by Norton

Should work fine just by setting the multipliers 19x/20x Turbo all else in Auto. I was just stating the clocks I used and why

Just keep an eye on/report back on the voltage @ load in auto (you may be able to adjust voltage a bit from the auto settings)

Ok I will do that and report back!

Exeodus · Nov 22, 2012, 03:43 PM

I don't normally post a link to another forum, but this thread helped me overclock mine to 4.3GHZ

http://www.overclock.net/t/1140459/b...results-coming

jgunning · Nov 22, 2012, 08:51 PM

Quote:

Originally Posted by Exeodus

I don't normally post a link to another forum, but this thread helped me overclock mine to 4.3GHZ

http://www.overclock.net/t/1140459/b...results-coming

Thanks mate, appreciate it

will take a look

Jul 11, 2012, 02:37 AM	#1
jgunning Join Date: Jul 2012 Location: Australia Posts: 309 (0.88/day) Thanks: 380 Thanked 81 Times in 58 Posts System Specs	Overclocking a FX 6100 Six-Core Black Edition CPU, 3.30 GHz Has anyone done some overclocking for their FX 6100 Six-Core Black Edition 3.30GHz yet? Thinking of doing mine and interested how far others have taken their overclocking for this cpu =)

Processor:	FX 6100 Six-Core Black Edition, 3.20GHz
Motherboard:	Asus M5A97-EVO
Cooling:	Cooler Master Hyper 212 Evo,4x120mm Corsair Fans
Memory:	Corsair Vengeance 16GB (4x4GB) DDR3 9-9-9-24 1600mhz
Video Card:	Sapphire ATI HD 7870XT Edition 2GB 256-bit DDR5
Hard Disk:	128GB OCZ Vertex 4 SSD (OS)WD Green 1TB x2(storage),
Optical Drive:	LG
CRT/LCD Model:	LG 24" LED
Case:	Corsair obsidian 550D
PSU:	FSP 700W
Software:	Windows 7 Pro x64

System Name:	My Fortress/Trish (WCG-1)/Julia (WCG-2)/Junior (WCG-3)/Norton3 (WCG-4)/Lil' Ella (WCG-5)/Mr Foldy
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/i7-920/Xeon (6c/12t)
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill 1600/2x4GB Corsair 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/IGP/HD 7870/2xHD 7770's/2x GTX 580's
Hard Disk:	All Western Digital
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/Fractal XL Rev 2
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/X Gold 750
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Processor:	FX 6100 Six-Core Black Edition, 3.20GHz
Motherboard:	Asus M5A97-EVO
Cooling:	Cooler Master Hyper 212 Evo,4x120mm Corsair Fans
Memory:	Corsair Vengeance 16GB (4x4GB) DDR3 9-9-9-24 1600mhz
Video Card:	Sapphire ATI HD 7870XT Edition 2GB 256-bit DDR5
Hard Disk:	128GB OCZ Vertex 4 SSD (OS)WD Green 1TB x2(storage),
Optical Drive:	LG
CRT/LCD Model:	LG 24" LED
Case:	Corsair obsidian 550D
PSU:	FSP 700W
Software:	Windows 7 Pro x64

Processor:	FX 6100 Six-Core Black Edition, 3.20GHz
Motherboard:	Asus M5A97-EVO
Cooling:	Cooler Master Hyper 212 Evo,4x120mm Corsair Fans
Memory:	Corsair Vengeance 16GB (4x4GB) DDR3 9-9-9-24 1600mhz
Video Card:	Sapphire ATI HD 7870XT Edition 2GB 256-bit DDR5
Hard Disk:	128GB OCZ Vertex 4 SSD (OS)WD Green 1TB x2(storage),
Optical Drive:	LG
CRT/LCD Model:	LG 24" LED
Case:	Corsair obsidian 550D
PSU:	FSP 700W
Software:	Windows 7 Pro x64

Jul 11, 2012, 03:46 AM	#3
jgunning Join Date: Jul 2012 Location: Australia Posts: 309 (0.88/day) Thanks: 380 Thanked 81 Times in 58 Posts System Specs	Thanks!I thought about 3.8ghz would be a good starting point. Will go from there =)

Jul 11, 2012, 03:49 AM	#4
jgunning Join Date: Jul 2012 Location: Australia Posts: 309 (0.88/day) Thanks: 380 Thanked 81 Times in 58 Posts System Specs	What temps could I run this cpu at safely..?

System Name:	Oldtimer(Always Crunching)
Processor:	Intel P4 631 @ 3.2 GHz [Stock 3.0 GHz]
Motherboard:	Intel D945GCPE
Memory:	512 MB x2 DDR2 (533MHZ and 366 MHZ)
Hard Disk:	160GB Sata1 7200rpm
Optical Drive:	Samsung DVD+-ROM
CRT/LCD Model:	ViewSonic VA703m
PSU:	Normal 450W PSU
Software:	Windows 7 Ultimate 32bit

Jul 12, 2012, 11:17 AM	#6
jgunning Join Date: Jul 2012 Location: Australia Posts: 309 (0.88/day) Thanks: 380 Thanked 81 Times in 58 Posts System Specs	Ok.so where do you guys suggest I start? For someone who is new to overclocking...?

Jul 12, 2012, 11:31 AM	#8
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (2.76/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	you can turbo boost it to 3.9 so i will suggest to go to 4.0Ghz and play games and run benchmarks and if it works well then go to 4.1 and repeat the same task as before and this time we will get a bigger one to 4.3 and test and see the temps also! If you Crash Then Restart and try again! You will thinking why i am not added oc in my System Specs! Answer: Well i only oc when i play games! like Portal 2 and Crysis! And the result i get is: Before ocing Portal 2 : 8 fps at minimum settings Crysis : Can't even play without ocing! After ocing Portal 2 15-21 fps Crysis: 10-12 fps*(which is not playable)

System Name:	Infernal Contraption
Processor:	AMD FX 8150
Motherboard:	Gigabyte 990XA-UD3
Cooling:	Antec Kuhler H20 620
Memory:	16 gig. Corsair Vengance DDR3 1600 LP
Video Card:	Galaxy/Nvidia GTX 560 2gb
Hard Disk:	OCZ 60g. SSD/Seagate 2Tb. 7200rpm
Optical Drive:	Samsung
CRT/LCD Model:	Asus
Case:	Lian Li PC-60FN
Sound Card:	Onboard HD
PSU:	Seasonic X750
Software:	Win. 7 Ult. 64/ SUSE 12.1 64

System Name:	Panther's PC
Processor:	FX8120 4.5 ghz + 0.125 volts over stock
Motherboard:	Gigabyte 990fxa ud3
Cooling:	Ek Supreme, Coolingking Tripple Thick Copper Radiator
Memory:	Hyperx 4x2gb 1600mhz
Video Card:	460 768mb : [
Hard Disk:	WD blue 500gb
CRT/LCD Model:	AOC HD
Case:	Mountain Mods U2-UFO
Sound Card:	Audigy z2
PSU:	Powercool 750w modular PSU ( GAMBLING YAY!)
Software:	Windows SEVEN
Benchmarks:	Pffft benchmarking for me is for the lulz only!

Jul 13, 2012, 10:01 AM	#13
gopal Join Date: Jun 2012 Location: Patna, Bihar, India, Asia, Earth, Terron System, Milky way Galaxy, And Beyond Posts: 990 (2.76/day) Thanks: 240 Thanked 121 Times in 94 Posts System Specs	Well i oced my P4 631 to 3.3GHz which is very difficult ! So 0.3 GHz increase in that old CPU so you can get 4.5 Ghz easily EDIT: THE TEMPS ARE AT 41C at idle(which is normal)the same temps without oc too! THE TEMPS ARE AT 48-65C at 95%+ load The benchmark used BONIC MANAGER(allowed to use 100% cpu) + 1080p video playing at the same time + internet explorer 9 I used SetFSB 2.2.134.98 Last edited by gopal; Jul 13, 2012 at 10:12 AM.

Nov 21, 2012, 03:47 AM	#15
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,390 (9.87/day) Thanks: 5,631 Thanked 10,667 Times in 3,328 Posts System Specs	I run mine @ 3.6Ghz (CnQ off, Turbo off) all cores at 100% load for crunching- has been running 24/7 for around 6 months straight now w/o issues. I could run at 3.8 for other things (gaming, etc..) but for crunching it's best to back off from a gaming grade clock for overall stability. It's using a Xig Gaia with a single fan and temps have been fine __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's/Radeon 7870 Helping the world one digit at a time...stop by our WCG Team thread and see what we do!**

Nov 22, 2012, 03:43 PM	#19
Exeodus Join Date: Oct 2005 Location: A suburb of Chicago, IL Posts: 581 (0.21/day) Thanks: 196 Thanked 156 Times in 88 Posts System Specs	I don't normally post a link to another forum, but this thread helped me overclock mine to 4.3GHZ http://www.overclock.net/t/1140459/b...results-coming __________________ http://www.fquick.com/exeodus Heatware

System Name:	The W.O.P.R.
Processor:	Core i7 920 D0 @ 4.0GHz 1.24 vcore
Motherboard:	ASUS P6T
Cooling:	Xigmatek S1283 with push\pull fan configuration.
Memory:	6GB Mushkin DDR3 1600MHz 7-8-7-20
Video Card:	2 - ASUS EAH5850 CrossfireX
Hard Disk:	1TB WD Black
Optical Drive:	NEC DVD Burner
CRT/LCD Model:	I-INC 28" 1920x1200 HDMI
Case:	Ultra M998
Sound Card:	Realtek HD
PSU:	Corsair TX750W
Software:	Windows 7 Enterprise 64-bit

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Releases Six New Athlon II, Phenom II Black Edition Processor Models	btarunr	News	19	Sep 22, 2010 02:59 PM
Intel to Release Core i7 990X Extreme Edition Six-Core Processor in Q4 2010	btarunr	News	33	Jun 14, 2010 06:35 AM
[FS] AMD Athlon 64 X2 2.7 GHz Socket AM2+ CPU (Retail) Black Edition $50 shipped	hv43082	Buy/Sell/Trade/Giveaway Forum	4	Mar 30, 2009 07:18 PM
[FS] AMD Athlon 64 X2 Kuma Black Edition 2.7 GHz Socket AM2+ CPU $50 shipped.	hv43082	Buy/Sell/Trade/Giveaway Forum	1	Mar 26, 2009 11:56 PM
3/3.5 ghz CPU for R.B six Las Vegas	technicks	Games	42	Dec 19, 2006 09:59 PM