Guide to running multiple GPU work units - Page 17

Norton · Nov 29, 2012, 12:15 AM

Running the HCC GPU and CPU wu's only seems to be doing well (8 GPU wu's on 4 cores plus 4 CPU wu's on the other 4 cores). I think I can hit close 100k ppd on the rig with this setup!

The 7870 is just a bit laggy when using the TV tuner but otherwise the rig runs fine and is actually 4-5C cooler than running with all CPU wu's

vawrvawerawe · Nov 29, 2012, 02:33 AM

What is WCG and I have crossfire so do I need to do anything special?

WCG website will not load for me.

t_ski · Nov 29, 2012, 03:02 AM

Basically, it's disctributed computing. If you decide to take the plunge, it helps to turn crossfire off for stability.

[Ion] · Nov 29, 2012, 03:10 AM

Quote:

Originally Posted by Norton

Running the HCC GPU and CPU wu's only seems to be doing well (8 GPU wu's on 4 cores plus 4 CPU wu's on the other 4 cores). I think I can hit close 100k ppd on the rig with this setup!

The 7870 is just a bit laggy when using the TV tuner but otherwise the rig runs fine and is actually 4-5C cooler than running with all CPU wu's

Wow--that's awesome!

So basically you're getting the same PPD from 1 GPU that I'm getting from 3

@DIT @ vawrvawerawe: WCG is a project started and partially funded by IBM that uses volunteer computers to do humanitarian scientific research. If you're interested in joining, look at the link in my signature in post in our WCG/BOINC thread

Aquinus · Nov 30, 2012, 09:01 AM

Quote:

Originally Posted by vawrvawerawe

I have crossfire so do I need to do anything special?

Nope, BOINC is intelligent enough to work around CFX being enabled however I did notice a little boost in performance when I disable CFX. I don't like turning it on and off all the time so I just leave it on.

I think it is time for me to run multiple WUs on my 6870s. I have a feeling that I can at least double my output.

Edit: So I reinstalled BOINC, threw my app_info.xml file in and now I'm not getting any projects at all. Communication is being established but it isn't getting anything new. I am getting some "File referenced in app_info.xml does not exist: <name of task>" errors, but I would assume that is because no projects have been downloaded yet?

Edit 2: I should have just read the OP and installed the version off WCG's website. Doh! Now stuff is almost ready to transfer but isn't. :|

Any idea why this is happening?

Code:

[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1
[error] No URL for file transfer of hcckernel.cl.7.05
[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86

My app_info.xml is this:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.33</avg_ncpus> 
		<max_ncpus>1.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.33</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

Another edit: I think I was able to reset the project and it started downloading.

t_ski · Nov 30, 2012, 11:21 AM

Quote:

Originally Posted by Aquinus

Nope, BOINC is intelligent enough to work around CFX being enabled however I did notice a little boost in performance when I disable CFX. I don't like turning it on and off all the time so I just leave it on.

I think it is time for me to run multiple WUs on my 6870s. I have a feeling that I can at least double my output.

Edit: So I reinstalled BOINC, threw my app_info.xml file in and now I'm not getting any projects at all. Communication is being established but it isn't getting anything new. I am getting some "File referenced in app_info.xml does not exist: <name of task>" errors, but I would assume that is because no projects have been downloaded yet?

Edit 2: I should have just read the OP and installed the version off WCG's website. Doh! Now stuff is almost ready to transfer but isn't. :|

Any idea why this is happening?

Code:

[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1
[error] No URL for file transfer of hcckernel.cl.7.05
[error] No URL for file transfer of wcg_hcc1_img_7.05_windows_intelx86

My app_info.xml is this:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.33</avg_ncpus> 
		<max_ncpus>1.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.33</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

Another edit: I think I was able to reset the project and it started downloading.

I believe the issue is that those three files are not installed by default but the app_info file is calling them. Resetting the project without the app_info file will usually take care of it, then suspend/get no more work, close BOINC, insert the file and restart.

stinger608 · Dec 1, 2012, 07:41 PM

Okay, here is the code that I just started running:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.5</avg_ncpus> 
		<max_ncpus>4.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.250</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

I have several WU's showing "Ready to Start" with my video card, however none of them are running. I have 8 WU's running with the CPU with this configuration, however none of the GPU WU's are running.

Any ideas? Shouldn't there be 4 GPU WU's running?

mstenholm · Dec 1, 2012, 08:03 PM

Quote:

Originally Posted by stinger608

Okay, here is the code that I just started running:

Code:

<app_info> 
	<app> 
		<name>hcc1</name> 
		<user_friendly_name>Help Conquer Cancer</user_friendly_name> 
	</app> 
	<file_info> 
		<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</name> 
		<executable/> 
	</file_info> 
	<file_info> 
		<name>hcckernel.cl.7.05</name> 
		<executable/> 
	</file_info> 
	<file_info>
		<name>wcg_hcc1_img_7.05_windows_intelx86</name>
		<executable/>
   </file_info>
	<app_version> 
		<app_name>hcc1</app_name> 
		<version_num>705</version_num> 
		<platform>windows_intelx86</platform> 
		<plan_class>ati_hcc1</plan_class> 
		<avg_ncpus>0.5</avg_ncpus> 
		<max_ncpus>4.0</max_ncpus> 
			<coproc> 
				<type>ATI</type> 
				<count>.250</count> 
			</coproc> 
		<file_ref> 
			<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1</file_name> 
			<main_program/> 
		</file_ref> 
		<file_ref> 
			<file_name>hcckernel.cl.7.05</file_name> 
			<open_name>hcckernel.cl</open_name> 
		</file_ref> 
	</app_version>
	<app_version>
		<app_name>hcc1</app_name>
		<version_num>705</version_num>
		<platform>windows_intelx86</platform>
		<avg_ncpus>1.000000</avg_ncpus>
		<max_ncpus>1.000000</max_ncpus>
		<api_version>6.13.0</api_version>
		<file_ref>
			<file_name>wcg_hcc1_img_7.05_windows_intelx86</file_name>
			<main_program/>
		</file_ref>
	</app_version>
</app_info>

I have several WU's showing "Ready to Start" with my video card, however none of them are running. I have 8 WU's running with the CPU with this configuration, however none of the GPU WU's are running.

Any ideas? Shouldn't there be 4 GPU WU's running?

I marked a few things in your file that differs from mine. Did you allow GPU work (Activities, Always allow GPU work or something like that, I have a Danish version). The file below works for me for 6 GPU (just change from 0.16 to 0.25) and no other work (i.e. CPU)

<app_info>
<app>
<name>hcc1</name>
<user_friendly_name>Help Conquer Cancer</user_friendly_name>
</app>
<file_info>
<name>wcg_hcc1_img_7.05_windows_intelx86__ati_hcc1 </name>
<executable/>
</file_info>
<file_info>
<name>hcckernel.cl.7.05</name>
<executable/>
</file_info>
<app_version>
<app_name>hcc1</app_name>
<version_num>705</version_num>
<platform>windows_intelx86</platform>
<plan_class>ati_hcc1</plan_class>
<avg_ncpus>1.0</avg_ncpus>
<max_ncpus>1.0</max_ncpus>
<coproc>
<type>ATI</type>
<count>0.16</count>
</coproc>
<file_ref>
<file_name>wcg_hcc1_img_7.05_windows_intelx86__ati _hcc1</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>hcckernel.cl.7.05</file_name>
<open_name>hcckernel.cl</open_name>
</file_ref>
</app_version>
</app_info>

stinger608 · Dec 1, 2012, 09:24 PM

Okay what does this refer to? "[error]No application found for task: windwos_intelx86 640; discarding"??????????

I have a bunch of these.

KieX · Dec 1, 2012, 09:34 PM

Quote:

Originally Posted by stinger608

Okay what does this refer to? "[error]No application found for task: windwos_intelx86 640; discarding"??????????

I have a bunch of these.

That means the server is sending you work that your app_info file isn't setup to do. You should log into the WCG page and make sure the profile you set for your computer has only the projects you setup in the app_info (which in this case I imagine is HCC). Whilst there, under the projects list there should be an option to process work on GPU (maybe that's why you weren't receiving GPU WU to crunch?)

stinger608 · Dec 1, 2012, 09:56 PM

Quote:

Originally Posted by KieX

That means the server is sending you work that your app_info file isn't setup to do. You should log into the WCG page and make sure the profile you set for your computer has only the projects you setup in the app_info (which in this case I imagine is HCC). Whilst there, under the projects list there should be an option to process work on GPU (maybe that's why you weren't receiving GPU WU to crunch?)

Okay, now I know that the different work can be added to the app_info, but where is that added in the code?

KieX · Dec 1, 2012, 10:10 PM

Quote:

Originally Posted by stinger608

Okay, now I know that the different work can be added to the app_info, but where is that added in the code?

Well, the format of the file is explained here, if you want to add something else to it: http://boinc.berkeley.edu/wiki/Anonymous_platform

This thread on XS has the code for the other projects: http://www.xtremesystems.org/forums/...app_info-files

I've not dabbed into it myself, but Norton I believe has set it up though with some problems on GFAM. Might be worth shooting him a PM?

Norton · Dec 1, 2012, 10:17 PM

Quote:

Originally Posted by KieX

Well, the format of the file is explained here, if you want to add something else to it: http://boinc.berkeley.edu/wiki/Anonymous_platform

This thread on XS has the code for the other projects: http://www.xtremesystems.org/forums/...app_info-files

I've not dabbed into it myself, but Norton I believe has set it up though with some problems on GFAM. Might be worth shooting him a PM?

I did try it out but the errors were pretty extreme and I don't know enough about the files yet to be able to fix them. The rig ran fine but WCG showed a couple of hundred GFAM errors in less than 24 hrs

KieX · Dec 1, 2012, 10:21 PM

Quote:

Originally Posted by Norton

I did try it out but the errors were pretty extreme and I don't know enough about the files yet to be able to fix them. The rig ran fine but WCG showed a couple of hundred GFAM errors in less than 24 hrs

Did it work fine without GFAM?

Norton · Dec 1, 2012, 10:26 PM

Quote:

Originally Posted by KieX

Did it work fine without GFAM?

Couldn't get it working. Tried a couple of times but I stepped away from it for a little while so I wouldn't keep throwing errors into my WCG file.

Switched to HCC cpu and gpu for now but I have an early Xmas gift coming that will allow me to keep my output up and try the All app_info again early next week

stinger608 · Dec 1, 2012, 10:29 PM

okay, added the app_info file from xtremesystems. I tweaked the HCC file. Seems to be working so far. Probably too early to tell for sure.

Under the projects tab though, my "work done" number does not seem to be changing or gaining? Even though it has completed about 20 or so work units. Is that normal?

KieX · Dec 1, 2012, 10:38 PM

Quote:

Originally Posted by Norton

Couldn't get it working. Tried a couple of times but I stepped away from it for a little while so I wouldn't keep throwing errors into my WCG file.

Switched to HCC cpu and gpu for now but I have an early Xmas gift coming that will allow me to keep my output up and try the All app_info again early next week

Look forward to whatever it is.

Quote:

Originally Posted by stinger608

okay, added the app_info file from xtremesystems. I tweaked the HCC file. Seems to be working so far. Probably too early to tell for sure.

Under the projects tab though, my "work done" number does not seem to be changing or gaining? Even though it has completed about 20 or so work units. Is that normal?

Can happen sometimes. Best thing to do is check on the WCG page under "Results status" see if you can find recent WU's in Pending Validation list. If it's not coming up might be worth just hitting the updated button a few times and perhaps reboot.

stinger608 · Dec 1, 2012, 10:46 PM

Quote:

Originally Posted by KieX

Can happen sometimes. Best thing to do is check on the WCG page under "Results status" see if you can find recent WU's in Pending Validation list. If it's not coming up might be worth just hitting the updated button a few times and perhaps reboot.

Okay, I see what that is now. Took me a minute.

Yea, I have 13 pages of "Pending Validation" going on! About 10 pages are from today alone.

ThE_MaD_ShOt · Dec 2, 2012, 12:01 AM

Cool Stinger you set man.

agent00skid · Dec 3, 2012, 10:02 PM

Decided to test 2 WU's on my laptop.
So far worked fine, even on client 7.0.28.

manofthem · Dec 3, 2012, 11:34 PM

I'm still waiting for a fix to get multi WUs working on Windows 8. If someone finds a fix, I hope they post it.

Norton · Dec 3, 2012, 11:53 PM

Quote:

Originally Posted by manofthem

I'm still waiting for a fix to get multi WUs working on Windows 8. If someone finds a fix, I hope they post it.

If I found one I would definitely post it for you

Will be bringing an early Xmas gift online later tonight.....

manofthem · Dec 4, 2012, 12:09 AM

Quote:

Originally Posted by Norton

If I found one I would definitely post it for you

Will be bringing an early Xmas gift online later tonight.....

You are the Pimp indeed, no jokes

hat · Dec 4, 2012, 03:13 AM

I may have discovered my problem:

hat · Dec 4, 2012, 06:20 AM

Well, I got it working properly. It seems that you need to let the manager download at least one of all of the types of work units mentioned in the app_info file before you actually put the file into place.

Nov 29, 2012, 12:15 AM	#401
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,174 (9.95/day) Thanks: 5,415 Thanked 10,142 Times in 3,191 Posts System Specs	Running the HCC GPU and CPU wu's only seems to be doing well (8 GPU wu's on 4 cores plus 4 CPU wu's on the other 4 cores). I think I can hit close 100k ppd on the rig with this setup! The 7870 is just a bit laggy when using the TV tuner but otherwise the rig runs fine and is actually 4-5C cooler than running with all CPU wu's __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Team thread- crunch for our Team/see what we do...**

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Nov 29, 2012, 02:33 AM	#402
vawrvawerawe Join Date: Nov 2012 Posts: 501 (2.59/day) Thanks: 269 Thanked 24 Times in 22 Posts	What is WCG and I have crossfire so do I need to do anything special? WCG website will not load for me. __________________ MSI Z77A-G45 \| Sapphire HD 7950 3GB GDDR5 x2 CROSSFIRE \| Intel Core i7-3770K \| Patriot Viper 3 16GB 1866 CORSAIR CMPSU-750TX \| OCZ Agility 4 256GB SATAIII \| Xbt \| 10TB WD SATAIII HDDs \| Rosewill Challenger Case Selling 2x HD 7950 3GB: http://www.techpowerup.com/forums/sh...d.php?t=182118

Nov 29, 2012, 03:02 AM	#403
t_ski Staff Join Date: Apr 2006 Location: Illinois, USA Posts: 8,841 (3.40/day) Thanks: 3,001 Thanked 3,306 Times in 2,528 Posts System Specs	Basically, it's disctributed computing. If you decide to take the plunge, it helps to turn crossfire off for stability. __________________ t_ski's stuff for sale ~ TPU Eyefinity Club ~ Heatware Silverstone TJ07 build ~ Mini ITX Home Server build Intel i7 3930K ~ Asus P9X79 Pro ~ 4 x 8GB Corsair Dominator Platinum 1866 C9 ~ Triple 7970's with EK FC-7970 CSQ ~ Triple Asus VW246H LCD's ~ 2 x 120 GB Corsair Force 3 (Raid 0) ~ 500GB WD ~ Lite-On BluRay ~ Nickel-plated Heatkiller 3.0 CU ~ D5 with EK X-top ~ BIX Quad Rad ~ Corsair AX1200 ~ Silverstone TJ07

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

System Name:	Kratos
Processor:	Intel Core i7 3820 @ 4.37Ghz (128.6x34) 1.384-1.395v (LLC)
Motherboard:	ASUS P9X79 Deluxe
Cooling:	Zalman CPNS9900MAX 130mm
Memory:	G.Skill DDR3-2400, 16gb (4x4gb) @ 10-12-11-30-108-1T 1.65v
Video Card:	2x AMD (MSI branded) Radeon HD 6870 (Crossfire)
Hard Disk:	2x120Gb SATA3 Corsair Force GT Raid-0, 3x1Tb SATA2 RAID-5
Optical Drive:	Asus DVD Burner on Marval SATA3 Controller
CRT/LCD Model:	28" Hanspree, 22" MAG Innovision. Both DVI
Case:	Antec 1200
Sound Card:	Realtek® ALC898 8-Channel High Definition Audio
PSU:	Seasonic 1000-watt 80 PLUS Platinum
Software:	Windows 7 x64 Professional

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Dec 1, 2012, 09:24 PM	#409
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,481 (3.31/day) Thanks: 7,859 Thanked 2,529 Times in 1,775 Posts System Specs	Okay what does this refer to? "[error]No application found for task: windwos_intelx86 640; discarding"?????????? I have a bunch of these. __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

Dec 1, 2012, 10:29 PM	#416
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,481 (3.31/day) Thanks: 7,859 Thanked 2,529 Times in 1,775 Posts System Specs	okay, added the app_info file from xtremesystems. I tweaked the HCC file. Seems to be working so far. Probably too early to tell for sure. Under the projects tab though, my "work done" number does not seem to be changing or gaining? Even though it has completed about 20 or so work units. Is that normal? __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

Dec 2, 2012, 12:01 AM	#419
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,753 (6.94/day) Thanks: 2,546 Thanked 2,450 Times in 1,474 Posts System Specs	Cool Stinger you set man. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Dec 3, 2012, 10:02 PM	#420
agent00skid Join Date: May 2012 Location: Denmark Posts: 355 (0.93/day) Thanks: 18 Thanked 154 Times in 87 Posts System Specs	Decided to test 2 WU's on my laptop. So far worked fine, even on client 7.0.28.

System Name:	Gamer+Cruncher \| Acer 5551g
Processor:	A6-3500 APU @ 3 GHz \| Phenom II X3 N830 @ 1,5 GHz
Motherboard:	Gigabyte GA-A75M-S2V \| Acer JE50_DN
Cooling:	AC Freezer 7 Pro R2, 3 cabinet fans \| Stock laptop with cooling pad
Memory:	24GB 933MHz DDR3 CL9 @ 907 MHz \| 22GB 667MHz DDR3 CL9
Video Card:	Radeon HD 6530D APU @ 604 MHz \| Mobility Radeon HD 5650 @ 550 MHz
Hard Disk:	500GB WD Blue Caviar \| Hitachi 500GB 5400RPM
Optical Drive:	None \| TSSTcorp CDDVDW TS-L633C
CRT/LCD Model:	ASUS VH242H \| Internal 15,6"
Case:	Thermaltake V3 BE \| Laptop
Sound Card:	Realtek \| Realtek, Audio 2 DJ
PSU:	SeaSonic SS-520FL² F3 \| 90W 19V Power brick
Software:	Windows 7 Home Premium \| Windows 7 Home Premium

Dec 3, 2012, 11:34 PM	#421
manofthem Join Date: Jan 2011 Location: WPB, FL Posts: 3,338 (3.86/day) Thanks: 2,089 Thanked 2,515 Times in 1,277 Posts System Specs	I'm still waiting for a fix to get multi WUs working on Windows 8. If someone finds a fix, I hope they post it. __________________ My Heatware "P.S. Why buy from Newegg...when you can buy from Sneeky!" -LiNKiN

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

Dec 4, 2012, 03:13 AM	#424
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	I may have discovered my problem: __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

Dec 4, 2012, 06:20 AM	#425
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Well, I got it working properly. It seems that you need to let the manager download at least one of all of the types of work units mentioned in the app_info file before you actually put the file into place. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is anyone have problems with invalid/inconclusive/error work units?	twilyth	World Community Grid (WCG)	10	Aug 26, 2010 08:26 PM
Laptop locks up when running multiple programs	Thrall	General Hardware	4	Jan 15, 2010 03:50 PM
CC config File Mod to report Work Units automatically	dustyshiv	World Community Grid (WCG)	17	Oct 14, 2009 05:39 PM
New Nvidia Work Units 5787-5798 released	BUCK NASTY	Folding@Home	9	Aug 21, 2009 09:57 AM
GPU-Z and multiple GPU's	[Daniel]	GPU-Z	8	Mar 30, 2009 04:55 PM