Asus crosshair v formula club

[Super XP]

WOW, 8-9-9-24 at 1866 is super tight, those should easily blow away my 2133's. Try to run them at 1T Command Rate. Should gain you approx: 3% to 6% Boost in performance, especially in CPU intensive tasks.

Post some benches

[os2wiz]

Originally Posted by Super XP

WOW, 8-9-9-24 at 1866 is super tight, those should easily blow away my 2133's. Try to run them at 1T Command Rate. Should gain you approx: 3% to 6% Boost in performance, especially in CPU intensive tasks.

Post some benches

They should arrive Monday in the mail (DHL linked with US Post Office). I was really impressed with the timings also. You know I had to pay $108 for those 2 8GB dimms. But I think it is a good idea. It may take some additional stress off the IMC running in 2 banks only and that might allow a slightly higher overclock??? Just guessing. If not at east my performance shoudl improve on some applications like you said. I will try 1T command rate as you suggested. That is almost a rarity now with high speed dimms (1T command rate that is).
I probably wouldn't have popped for the memory. Just got a bummer letter from social security that their not sending me a check for December because when after I retired I had work income ( That is not allowed on early retirements before age 65-66. That income came from my last paycheck that was paid after m,y retirement date and from 6 days of unused vacation pay. They are so ridiculous it makes me sick. I have no savings to live off and my job pension covers my mortgage, heating bill, and a small portion of my credit card debt. Now I will have bad credit for paying my bills next month late. You have no idea how humiliating this is. Social Security Administration is so inept and so poor about communicating their rules it is criminal. Another capitalist bureaucracy that must be destroyed with an egalitarian revolution.

[skellattarr]

well just ordered my fx 8350 from the tiger cant wait tel it comes 4.8 ghz here i come.

[os2wiz]

Originally Posted by skellattarr

well just ordered my fx 8350 from the tiger cant wait tel it comes 4.8 ghz here i come.

I'm happy for you. How have you been? It's been a while since you posted here last.

[os2wiz]

Originally Posted by Super XP

WOW, 8-9-9-24 at 1866 is super tight, those should easily blow away my 2133's. Try to run them at 1T Command Rate. Should gain you approx: 3% to 6% Boost in performance, especially in CPU intensive tasks.

Post some benches

With new ram installed and change in fsb from 230 to 233 =4.68 GHZ
New cinebench 64 bit test results also lowered cpu core voltage to 1.425 v.

[Mathragh]

Originally Posted by os2wiz

With new ram installed and change in fsb from 230 to 233 =4.68 GHZ
New cinebench 64 bit test results also lowered cpu core voltage to 1.425 v.

Awesome results dude!

[Steevo]

My spec Z just showed up.

Tonight............

[skellattarr]

Originally Posted by os2wiz

I'm happy for you. How have you been? It's been a while since you posted here last.

been doing ok going to have eye surgery soon a bit nerves over that. how are you?

[Super XP]

Originally Posted by skellattarr

been doing ok going to have eye surgery soon a bit nerves over that. how are you?

Good Luck

Originally Posted by os2wiz

With new ram installed and change in fsb from 230 to 233 =4.68 GHZ
New cinebench 64 bit test results also lowered cpu core voltage to 1.425 v.

Very Nice Results

Originally Posted by os2wiz

They should arrive Monday in the mail (DHL linked with US Post Office). I was really impressed with the timings also. You know I had to pay $108 for those 2 8GB dimms. But I think it is a good idea. It may take some additional stress off the IMC running in 2 banks only and that might allow a slightly higher overclock??? Just guessing. If not at east my performance shoudl improve on some applications like you said. I will try 1T command rate as you suggested. That is almost a rarity now with high speed dimms (1T command rate that is).
I probably wouldn't have popped for the memory. Just got a bummer letter from social security that their not sending me a check for December because when after I retired I had work income ( That is not allowed on early retirements before age 65-66. That income came from my last paycheck that was paid after m,y retirement date and from 6 days of unused vacation pay. They are so ridiculous it makes me sick. I have no savings to live off and my job pension covers my mortgage, heating bill, and a small portion of my credit card debt. Now I will have bad credit for paying my bills next month late. You have no idea how humiliating this is. Social Security Administration is so inept and so poor about communicating their rules it is criminal. Another capitalist bureaucracy that must be destroyed with an egalitarian revolution.

Capitalism is OK, the issue is Government Deregulation to ensure the Rich stay Rich, the Rich become Richer and the middle class become poor. This is called Vulture Capitalism. Those same individuals that wrecked the world's economy are the same people that control the Governments hence DE-REGULATION.

[os2wiz]

Originally Posted by skellattarr

been doing ok going to have eye surgery soon a bit nerves over that. how are you?

A little nerves myself, I go to court tomorrow to see if they drop the political charges against me for organizing hospital workers against cutbacks and closings. They are based on a perjured criminal complaint. If the 2 perjurers fail to submit detailed affidavits to back up their complaint the charges will be dropped. They should have submitted those affidavits weeks ago. I believe they are afraid toi perjure themselves in open court and that is why they are reluctant. I have some 240 signatures on petitions from hospital workers demanding that the charges be dismissed. Tomorrow lets me know if they dismiss or go to trial. It's been a trying 3 months for me My stress levels have been above normal. Not the same fellow I was when I was a young rebel. The will is still there but the body is weaker.

[os2wiz]

Originally Posted by Super XP

Good Luck

Very Nice Results

Capitalism is OK, the issue is Government Deregulation to ensure the Rich stay Rich, the Rich become Richer and the middle class become poor. This is called Vulture Capitalism. Those same individuals that wrecked the world's economy are the same people that control the Governments hence DE-REGULATION.

You got a point there. A basis for further discujssion in a dfferent forum:general nonsense.

[Steevo]

So I got 32GB of G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DD...

To boot and run at 2133 at 9.10.9.28 timings @ 1.6 volts.

Why do they hate me and have the SATA ports laid out by untrained monkeys?

[os2wiz]

Originally Posted by Steevo

So I got 32GB of G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DD...

To boot and run at 2133 at 9.10.9.28 timings @ 1.6 volts.

Why do they hate me and have the SATA ports laid out by untrained monkeys?

Time to update your systemspecs Steevo! Congratulations!
To day has been a glorious day for me. The low-life knaves who had me falsely arrested and
defamed my character, had not the courage to file a legal affidavit which would have amounted to felonious perjury. So all charges are dropped in my criminal case. A weight has been lifted off my spirit. I have so many people to thank who stood by me and signed petitions on my behalf. Love them all.

[Steevo]

Not mine actually, its a server.

9TB of RAID 5 on a dedicated card, 512GB of RAID 0 SSD on the board.



Of course it will be running F@H, and I will need to get a new cooler for the 8350 since I plan on running it hard.

[skellattarr]

my friend just ordered the crosshair v formula-z and the fx 8350 with mushkin 994092 2400 memory. i hope it all works together we got the memory because it was 16gb at 2400 mhz for 139.99 bucks on the egg

[os2wiz]

Originally Posted by Super XP

That is the same volts I am using. My HT is @ 2.60GHz. The only time I get stability issues is if I try to OC my RAM.

Bye the way if you like a little vulgar satire check in the TPU UK club. That is if it hasn't been moderated before you read it. Just posted a mild criticism of somebody's profanity.It is hilarious.

[skellattarr]

i got my 8350 today i installed it tried overclocking it to 4.6ghz it was unstable on prime so i clocked it at 4.5ghz so far so good. i guess 4.5 is as high as it will go

[Super XP]

Question, now that I am only using 2 of the 4 DIMMs, which 2 should I be using for max OC? The black or red Checked online but did not find anything about it.

Nevermind, its the RED slots according to the manual.

[os2wiz]

Originally Posted by skellattarr

i got my 8350 today i installed it tried overclocking it to 4.6ghz it was unstable on prime so i clocked it at 4.5ghz so far so good. i guess 4.5 is as high as it will go

You might be able to be stable higher. What is your core voltage set at when you are at 4.5 GHZ?

[os2wiz]

Originally Posted by Super XP

Question, now that I am only using 2 of the 4 DIMMs, which 2 should I be using for max OC? The black or red Checked online but did not find anything about it.

I believe it is bank 1 and 2. Not sure which color but it is the first 2 banks I believe.

[Super XP]

Originally Posted by os2wiz

I believe it is bank 1 and 2. Not sure which color but it is the first 2 banks I believe.

Currently I have them in the two Black Slots, the manual says to use the two Red for max stability and OC.

[os2wiz]

Originally Posted by Super XP

Question, now that I am only using 2 of the 4 DIMMs, which 2 should I be using for max OC? The black or red Checked online but did not find anything about it.

Nevermind, its the RED slots according to the manual.

Yes are the red slots the 2 front slots or the two rear slots?? I just was going to tell you I read the manual.

[os2wiz]

Well guys I always had run a 4 dimm memory configuration in the past until I just changed to 2 8GB dimms. Never thought of checking color codes. I had my ram in a red and a black slot. i am sure that was causing some lock ups I recently got in my browser. it wasn't a voltage issue so that must be the reason why. Also probably inhibited my overclocks. Thanks for bringing it up Super XP. I would never had checked otherwise. Now I'll give one more run of testing o.c. limits Thanks guys.

[os2wiz]

Originally Posted by os2wiz

Well guys I always had run a 4 dimm memory configuration in the past until I just changed to 2 8GB dimms. Never thought of checking color codes. I had my ram in a red and a black slot. i am sure that was causing some lock ups I recently got in my browser. it wasn't a voltage issue so that must be the reason why. Also probably inhibited my overclocks. Thanks for bringing it up Super XP. I would never had checked otherwise. Now I'll give one more run of testing o.c. limits Thanks guys.

Just upped the GHZ on the processor to about 4.86 I am uploading all the tests and voltage and temp values I can. Note that I had a couple of lockups in 3D Mark 11 so I upped the volatge all the way to 1.50 v. The Cinebench 64 scores are impressive though.

[skellattarr]

Originally Posted by os2wiz

You might be able to be stable higher. What is your core voltage set at when you are at 4.5 GHZ?

i have the vcore at 1.4v