GPUz and 7970 Crossfire issue...

EarthDog · Dec 3, 2012, 09:55 PM

Not sure if this has been covered before or if the scope reaches past my PC, however, with at least the 12.10 and 12.11 beta drivers, if I try to open GPUz to capture the score screenshot (after the benchmark of course) it freezes my whole system to a hard reboot. Happens through all 3DMarks, Unigine Heaven (hwbot).

This happened with HIS cards (7850s and 7970s)... Not sure about any other brand.

Help!

drdeathx · Dec 3, 2012, 09:58 PM

Same here. I open GPUZ 1st and then run benchie. It works then.

EarthDog · Dec 3, 2012, 10:00 PM

That is what I have to do... was yours on another brand outside of HIS?

manofthem · Dec 3, 2012, 10:58 PM

Pretty sure this happens to me too, asus and sapphire 7970s reference cards. I haven't used GPUz lately so can't verify te last time this happened.

drdeathx · Dec 3, 2012, 11:27 PM

Quote:

Originally Posted by EarthDog

That is what I have to do... was yours on another brand outside of HIS?

3 x Sapphires Dog.

EarthDog · Dec 5, 2012, 05:33 PM

BUMP!

Is this a known issue that I missed or............?

drdeathx · Dec 5, 2012, 09:57 PM

Quote:

Originally Posted by EarthDog

BUMP!

Is this a known issue that I missed or............?

Looks like it.

W1zzard · Dec 5, 2012, 10:03 PM

Quote:

Originally Posted by EarthDog

Is this a known issue that I missed or............?

This seems to be related to the AMD driver. Can you check if it happens with 12.8 or earlier?

EarthDog · Dec 7, 2012, 04:41 PM

I had 12.8 handy and it showed the same behavior on my PC.

EarthDog · Dec 10, 2012, 09:18 PM

Looks like its on mobile 7970's as well.

http://www.techpowerup.com/forums/sh...d.php?t=175851

alamakluke · Dec 11, 2012, 12:24 AM

Thanks Earth for posting on the other thread.

I've had GPUZ freeze both my rigs. The only thing that is coming between both rigs is Windows 8 and GPUZ 0.6.6 for me. My first rig got 2xSapphire 7970 in CF using 12.11beta 8 drivers, and my 2nd rig is using a MSI 7770 with AMD official 12.10 drivers and both rigs have the problem.

But a way around it is too open GPUZ before you bench, that works all the time.

Hope they fix it shortly.

alamakluke · Dec 11, 2012, 12:46 AM

I want to add something right now. I just open up GPUZ, no problem I was going to start benching but instead I decided to try to save the GPU bios to disk and my rig crashed. So GPUZ is crashing on different situations.

Plug · Jan 15, 2013, 12:16 AM

Has the maker vanished ? lol

this is also happening to me, complete system lockup when running previous and latest GPUz

2x HIS 7950s.

works perfect if i run it after a reboot but if i dont run it and boot system after 10 minutes i decide to run it, it completely locks.

this needs fixed ASAP, i think its the way GPUz detects the cards, something must have changed with 7 series cards.

Plug · Jan 16, 2013, 06:42 PM

well wizzard has been online for quite a wile these past 2 days, and no replys to his gpuz customers
wonder where he is :/

this is a massive issue for lots of people with 7 series cards. the detection is just not quite right

AIDA64 has perfected the detection as there is no issues with that program when it detects our cards or sensors.

but use GPUZ instant lockup.

cadaveca · Jan 16, 2013, 06:43 PM

I don't get lock-ups?

Can you give me a step-by-step rundown of how to make it happen?

W1zzard · Jan 16, 2013, 06:52 PM

confirmed. waiting for 13.1 to check if it fixes the problem or if i have to work around it on my own

Random Murderer · Jan 16, 2013, 06:58 PM

Glad to see it's not just me having this issue.

Plug · Jan 16, 2013, 09:10 PM

Quote:

Originally Posted by W1zzard

confirmed. waiting for 13.1 to check if it fixes the problem or if i have to work around it on my own

Sweet

could you give us all some information on whats causing it to happen.
if i reboot my pc and run GPUz as soon as the pc is booted up, it will load up no problem GPUZ

but if i wait and not use it and try to use it 10-20 minutes later it will instant lock ont he GPUZ startup Logo.

This does not happen with AIDA64 at all might want to get in contact with those guys on there sensor card detection ect as there`s might be different to yours....

Plug · Jan 17, 2013, 11:22 PM

UPDATE : 13.1 still the same system lockup when starting up GPUZ
works after logon but 10 minutes later lockup if you run it again.

AlienIsGOD · Jan 17, 2013, 11:33 PM

Quote:

Originally Posted by alamakluke

I want to add something right now. I just open up GPUZ, no problem I was going to start benching but instead I decided to try to save the GPU bios to disk and my rig crashed. So GPUZ is crashing on different situations.

i've had this happen as well on my Sapphire

W1zzard · Jan 18, 2013, 06:41 PM

After spending half the day crashing the card and resetting the system, it seems that the hang is caused when GPU-Z tries to read the BIOS of the slave card.

GPU-Z asks the driver "is this card in ULPS?" and if yes, then skips BIOS reading. But the AMD driver tells me "no no you can go ahead", and boom system crashed.

Now trying to figure out how to work around this. Not having high hopes. I might just disable BIOS reading completely for all slave cards.

Quote:

Originally Posted by Plug

This does not happen with AIDA64

aida64 never touches the slave bios when ulps is enabled

AlienIsGOD · Jan 18, 2013, 07:13 PM

i run a single card tho, and the freeze/crash happens to me

W1zzard · Jan 18, 2013, 07:20 PM

Quote:

Originally Posted by AlienIsGOD

i run a single card tho, and the freeze/crash happens to me

are you sure it's the same problem?

gpuz will work perfectly fine, you can start it as often as you want. but once you've run a 3d app and then start gpuz the system will hang

AlienIsGOD · Jan 18, 2013, 07:28 PM

Quote:

Originally Posted by W1zzard

gpuz will work perfectly fine, you can start it as often as you want. but once you've run a 3d app and then start gpuz the system will hang

so i should restart the PC if i want to save the BIOS? I've tried 2 times to get GPU Z to read the BIOS of my card and the system freezes/crashes.

W1zzard · Jan 18, 2013, 07:41 PM

Quote:

Originally Posted by AlienIsGOD

so i should restart the PC if i want to save the BIOS? I've tried 2 times to get GPU Z to read the BIOS of my card and the system freezes/crashes.

does this only happen after running a 3d app?

Dec 3, 2012, 09:55 PM	#1
EarthDog Join Date: Dec 2009 Posts: 2,052 (1.66/day) Thanks: 246 Thanked 349 Times in 303 Posts System Specs	GPUz and 7970 Crossfire issue...(GPUz freezes system) Not sure if this has been covered before or if the scope reaches past my PC, however, with at least the 12.10 and 12.11 beta drivers, if I try to open GPUz to capture the score screenshot (after the benchmark of course) it freezes my whole system to a hard reboot. Happens through all 3DMarks, Unigine Heaven (hwbot). This happened with HIS cards (7850s and 7970s)... Not sure about any other brand. Help! Last edited by EarthDog; Dec 10, 2012 at 09:18 PM.

System Name:	People really name their PC? Oye...
Processor:	3570K / 3770K
Motherboard:	Giga Z77X UD5H / Asrock OC Formula
Cooling:	Tt Water 2.0 Extr/ MCW320 + PA120.2 + Apogee XT
Memory:	16GB DDR3 1600Mhz / 8GB DDR3 2666 CL11
Video Card:	ECGA GTX 690 / HIS 7970 X
Hard Disk:	256GB OCZ Vector, 640GB Caviar Black / 60GB Vertex 3
Optical Drive:	DVD-RW
CRT/LCD Model:	Yamakasi 27" 2560x1440 / Acer 23" 1920x1080
Case:	HAF XB / Benching station
PSU:	Seasonic X560 / X1000P

System Name:	Halloween Boo!
Processor:	Intel Core i7 3770K
Motherboard:	Gigabyte Z77-Up7
Cooling:	Custom Water/ Thermalchill TA 120.3/ Swiftech Apogeee XT/ MCP655/ Swiftech M icrores/ XSPC RX 240
Memory:	16G G.Skill trident 2400MHz
Video Card:	3 x Radeon 7970
Hard Disk:	OCZ Revo Drive 240G
Optical Drive:	Asus
CRT/LCD Model:	24 inch Viewsonic
Case:	Phobia WayCoolIt Test Bench
PSU:	Nexus 1100 watt

System Name:	People really name their PC? Oye...
Processor:	3570K / 3770K
Motherboard:	Giga Z77X UD5H / Asrock OC Formula
Cooling:	Tt Water 2.0 Extr/ MCW320 + PA120.2 + Apogee XT
Memory:	16GB DDR3 1600Mhz / 8GB DDR3 2666 CL11
Video Card:	ECGA GTX 690 / HIS 7970 X
Hard Disk:	256GB OCZ Vector, 640GB Caviar Black / 60GB Vertex 3
Optical Drive:	DVD-RW
CRT/LCD Model:	Yamakasi 27" 2560x1440 / Acer 23" 1920x1080
Case:	HAF XB / Benching station
PSU:	Seasonic X560 / X1000P

Dec 3, 2012, 10:58 PM	#4
manofthem Join Date: Jan 2011 Location: WPB, FL Posts: 3,341 (3.86/day) Thanks: 2,093 Thanked 2,516 Times in 1,278 Posts System Specs	Pretty sure this happens to me too, asus and sapphire 7970s reference cards. I haven't used GPUz lately so can't verify te last time this happened. __________________ My Heatware "P.S. Why buy from Newegg...when you can buy from Sneeky!" -LiNKiN

Dec 3, 2012, 09:58 PM	#2
drdeathx Join Date: May 2009 Location: Chicago burbs Posts: 1,514 (1.03/day) Thanks: 39 Thanked 335 Times in 275 Posts System Specs	Same here. I open GPUZ 1st and then run benchie. It works then.

Dec 3, 2012, 10:00 PM	#3
EarthDog Join Date: Dec 2009 Posts: 2,052 (1.66/day) Thanks: 246 Thanked 349 Times in 303 Posts System Specs	That is what I have to do... was yours on another brand outside of HIS?

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

Dec 5, 2012, 05:33 PM	#6
EarthDog Join Date: Dec 2009 Posts: 2,052 (1.66/day) Thanks: 246 Thanked 349 Times in 303 Posts System Specs	BUMP! Is this a known issue that I missed or............?

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

Dec 7, 2012, 04:41 PM	#9
EarthDog Join Date: Dec 2009 Posts: 2,052 (1.66/day) Thanks: 246 Thanked 349 Times in 303 Posts System Specs	I had 12.8 handy and it showed the same behavior on my PC.

Dec 10, 2012, 09:18 PM	#10
EarthDog Join Date: Dec 2009 Posts: 2,052 (1.66/day) Thanks: 246 Thanked 349 Times in 303 Posts System Specs	Looks like its on mobile 7970's as well. http://www.techpowerup.com/forums/sh...d.php?t=175851

Dec 11, 2012, 12:24 AM	#11
alamakluke Join Date: Jul 2012 Posts: 4 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Thanks Earth for posting on the other thread. I've had GPUZ freeze both my rigs. The only thing that is coming between both rigs is Windows 8 and GPUZ 0.6.6 for me. My first rig got 2xSapphire 7970 in CF using 12.11beta 8 drivers, and my 2nd rig is using a MSI 7770 with AMD official 12.10 drivers and both rigs have the problem. But a way around it is too open GPUZ before you bench, that works all the time. Hope they fix it shortly.

Dec 11, 2012, 12:46 AM	#12
alamakluke Join Date: Jul 2012 Posts: 4 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	I want to add something right now. I just open up GPUZ, no problem I was going to start benching but instead I decided to try to save the GPU bios to disk and my rig crashed. So GPUZ is crashing on different situations. Last edited by alamakluke; Dec 12, 2012 at 08:00 PM.

Jan 15, 2013, 12:16 AM	#13
Plug Join Date: Feb 2005 Posts: 107 (0.04/day) Thanks: 3 Thanked 11 Times in 9 Posts System Specs	Has the maker vanished ? lol this is also happening to me, complete system lockup when running previous and latest GPUz 2x HIS 7950s. works perfect if i run it after a reboot but if i dont run it and boot system after 10 minutes i decide to run it, it completely locks. this needs fixed ASAP, i think its the way GPUz detects the cards, something must have changed with 7 series cards.

System Name:	5870 Xtreme Xfire System SpeC
Processor:	Intel I7 920 @ 4.2 HT
Motherboard:	Biostar Tpower X58
Cooling:	Thermal Right Extreme 120 - Push Pull Config
Memory:	3x2 Ocz Blades 7.7.7.21
Video Card:	2x Sapphire 5870 Xfire @1000/1300 \| PhysX 8800GTS
Hard Disk:	1TB Samsung F3 32 + 1TB Samsung F1 32 + 3x Misc HDD`s
Optical Drive:	LG Bluray & HDDVD Player Optical Drive
CRT/LCD Model:	24" Nec Multisync 24WMGX3 LCD
Case:	Coolmaster Staker Monster Case Custom
Sound Card:	XFI Azuntech Prelude 7.1 HD
PSU:	PC Power & Cooling 910w Monster Single Rail 75a Killer
Software:	Windows 7 Ultimate Edition x64
Benchmarks:	Vantage, 31k With PhysX

Jan 16, 2013, 06:42 PM	#14
Plug Join Date: Feb 2005 Posts: 107 (0.04/day) Thanks: 3 Thanked 11 Times in 9 Posts System Specs	well wizzard has been online for quite a wile these past 2 days, and no replys to his gpuz customers wonder where he is :/ this is a massive issue for lots of people with 7 series cards. the detection is just not quite right AIDA64 has perfected the detection as there is no issues with that program when it detects our cards or sensors. but use GPUZ instant lockup.

Jan 16, 2013, 06:43 PM	#15
cadaveca My name is Dave Join Date: Apr 2006 Location: The Great White North Posts: 10,773 (4.14/day) Thanks: 4,496 Thanked 5,234 Times in 3,211 Posts System Specs	I don't get lock-ups? Can you give me a step-by-step rundown of how to make it happen? __________________ Gadgets, Phones, Tablets, Cameras, TVs, HiFi...NextPowerUp -Only real men play games THIS way.

System Name:	Eyefinity Gamer
Processor:	Intel i5 3570K @ 4.6 GHz
Motherboard:	ASUS Maximmus V Formula
Cooling:	Corsair H100
Memory:	16 GB G.Skill F3-2666C11Q-16GTXD
Video Card:	AMD Radeon HD7950 3GB x2 w/AMD Catalyst 12.10
Hard Disk:	OCZ Nocti 60GB mSATA, Crucial M4 120GB x2
Optical Drive:	LG BluRay/HD-DVD
CRT/LCD Model:	3x Dell U2412M
Case:	LianLi T60
Sound Card:	N/A
PSU:	Silverstone Strider 750W GOLD
Software:	Windows 8 Pro
Benchmarks:	Benchmarking is for suckers. ;)

Jan 16, 2013, 06:52 PM	#16
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,790 (4.18/day) Thanks: 184 Thanked 10,283 Times in 3,175 Posts System Specs	confirmed. waiting for 13.1 to check if it fixes the problem or if i have to work around it on my own

Jan 16, 2013, 06:58 PM	#17
Random Murderer Join Date: Dec 2006 Location: Florida, where it's hot as hell. Posts: 4,094 (1.73/day) Thanks: 1,003 Thanked 677 Times in 507 Posts System Specs	Glad to see it's not just me having this issue. __________________ “People just need a reason to live. Some peoples reason is to bitch on the Internet. W1zz is just giving these sad souls a reason to live. Hes like a saint. Saint W1zzard.” -TheMailMan78 Mars: Apparently I have been there before, but I don't recall. Not all who wander are lost...

System Name:	Shut up and take my money! \| Fatal Error
Processor:	Core i7 3820 @ 4.9GHz, 129 x 38 \| Core2 Duo E8400 E0
Motherboard:	Asus ROG Rampage IV Extreme \| EVGA 790i Ultra SLI
Cooling:	Corsair H100i \| Q6600 Stock cooler
Memory:	4x 4GB Samsung 30nm LP HYK0 DDR3-1600 @ 2408 1T \| 2x 2GB A-Data DDR3-2000
Video Card:	2x AMD HD7970 flashed to XFX Black Editions, EVGA GTS250 for Physx \| Zotac 9800GTX+
Hard Disk:	Samsung SSD 830 256GB \| Too many, lol.
CRT/LCD Model:	Achieva Shimian QH270-IPSI 27" 2560x1440 \| HP w2207h 1680x1050
Case:	Silverstone Kublai 04 \| Chenming 601ae-BLU
Sound Card:	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650
PSU:	Cooler Master Silent Pro Gold 1200w \| Enermax Liberty 620W
Software:	Win 7 64
Benchmarks:	9001 BungholioMarks, "Bitchin' Fast"

Jan 17, 2013, 11:22 PM	#19
Plug Join Date: Feb 2005 Posts: 107 (0.04/day) Thanks: 3 Thanked 11 Times in 9 Posts System Specs	UPDATE : 13.1 still the same system lockup when starting up GPUZ works after logon but 10 minutes later lockup if you run it again.

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 @ 3.4 ghz 1.17 vcore \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

Jan 18, 2013, 07:13 PM	#22
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,607 (1.49/day) Thanks: 4,327 Thanked 1,110 Times in 633 Posts System Specs	i run a single card tho, and the freeze/crash happens to me

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Asus Direct CU 2 7970 Voltage issue	Iactus	AMD / ATI	63	Oct 16, 2012 03:55 AM
Cold boot issue with 7970	hoedownjack23	AMD / ATI	8	Aug 11, 2012 06:13 AM
crossfire 2x6970 or 1 7970?	tilldeath	AMD / ATI	72	Feb 23, 2012 07:58 PM
Crossfire 7970's and power question	Aceman.au	AMD / ATI	27	Jan 28, 2012 06:09 PM
7970 Crossfire Review	mypg0306	AMD / ATI	21	Dec 28, 2011 01:32 AM