Guide to running multiple GPU work units - Page 25

AlienIsGOD · Jan 19, 2013, 10:35 PM

so any idea how a 6870 would fare with multiple work units? My rig should be together soon and i want to have my old rig set up to crunch 24/7 on the i5 2400/HD 6870 combo.

manofthem · Jan 19, 2013, 10:37 PM

Quote:

Originally Posted by HammerON

I don't think those drivers liked my oc of 1100 on the cards. That is the only thing I can think of....

Quote:

Originally Posted by mstenholm

1100 MHz should be a safe OC. I ran my at 1102 until 10 min ago with no other errors then the sync thing. Now it is 1125 (one Asus and one XFX) at auto fan. The Asus is still at 10% and 50 C. I just love that HS.

This talk makes me want to try to get my cards over 1000 core clocks. Before anything above that crashed, but I'm going to try again; perhaps on the new drivers I will have some better stability

.

for your handsome overclocks boys

Norton · Jan 19, 2013, 10:42 PM

Quote:

Originally Posted by AlienIsGOD

so any idea how a 6870 would fare with multiple work units? My rig should be together soon and i want to have my old rig set up to crunch 24/7 on the i5 2400/HD 6870 combo.

My 6870 Hawk is doing single wu's on a 1045T and the rig gets 12-15k ppd. You should be able to get at least 2 or 3 going at once and get 20-25k ppd. Watch the temps though 6xxx cards run hotter than 7xxx cards....

ThE_MaD_ShOt · Jan 19, 2013, 11:00 PM

Also my 6850's are running one each and they get right at 10 to 12k ppd per card.

m&m's · Jan 19, 2013, 11:17 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Also my 6850's are running one each and they get right at 10 to 12k ppd per card.

My 5770 get 8k ppd with 2 WU on it. You should put at least 2WU per card! You would do like 15K+ ppd per card...

AlienIsGOD · Jan 19, 2013, 11:35 PM

Quote:

Originally Posted by Norton

Watch the temps though 6xxx cards run hotter than 7xxx cards....

6870 Sapphire with Dual X cooling before they named it as such. My 6870 never went hotter than 60C in BF3 so i pretty much expect the same temps from WCG on it.

Norton · Jan 19, 2013, 11:52 PM

Quote:

Originally Posted by AlienIsGOD

6870 Sapphire with Dual X cooling before they named it as such. My 6870 never went hotter than 60C in BF3 so i pretty much expect the same temps from WCG on it.

http://www.techscreens.com/wp-conten...01-575x447.jpg

My 6870 Hawk has the Twin Frozr III on it which is a little beefier than your cooler and it runs in the low 60's, which is 5-10C higher than the 7770/7870's I'm running and they have lower budget coolers.

In either case, yes they run hotter but nothing to really worry about...

ThE_MaD_ShOt · Jan 19, 2013, 11:55 PM

Quote:

Originally Posted by m&m's

My 5770 get 8k ppd with 2 WU on it. You should put at least 2WU per card! You would do like 15K+ ppd per card...

I was actually thinking of doing that.

Once I have my new main rig done ( ordered more parts today for it) Then this rig will be a dedicated crunching rig.

johnspack · Jan 20, 2013, 12:22 AM

My gpu buffer is really getting loaded! Check your buffers gentlemen, we have a lot of crunching to do!
Edit: got my eighth star!!!

ThE_MaD_ShOt · Jan 20, 2013, 12:48 AM

I upped my buffer today on the 7850 rig. It added about 1.5k more units to my buffer.

mstenholm · Jan 20, 2013, 08:44 AM

Quote:

Originally Posted by manofthem

This talk makes me want to try to get my cards over 1000 core clocks. Before anything above that crashed, but I'm going to try again; perhaps on the new drivers I will have some better stability

.

for your handsome overclocks boys

We are talking about 7700s which are born as 1000 MHz GPUs. My 7970s are running at 1024 MHz. I had to put then next to each other so one is running hot (+65 C)....

Norton · Jan 20, 2013, 10:12 AM

Quote:

Originally Posted by mstenholm

We are talking about 7700s which are born as 1000 MHz GPUs. My 7970s are running at 1024 MHz. I had to put then next to each other so one is running hot (+65 C)....

I had one of mine doing the same (75C). A single 140mm fan in front of the cards brought it back down to the mid 50's

mstenholm · Jan 20, 2013, 12:17 PM

Quote:

Originally Posted by Norton

I had one of mine doing the same (75C). A single 140mm fan in front of the cards brought it back down to the mid 50's

I already have a 120 mm fan laying on top of them. I decided to swap cards with another rigs cards since two 7700 doesn't produce much heat and hence would have less problem being placed next to each other but gave up since I got driver stops all the time with the 7700s when I swapped. I guess that I will swap the two 7970s around from time to time. The other (identical) one is running at 45 C. 20 degree difference is a lot.

stinger608 · Jan 20, 2013, 04:31 PM

I am actually thinking about selling my 6870 to grab a 7770 instead. The 7xxx series of cards crunch soooooooo much better than anything else.

ThE_MaD_ShOt · Jan 20, 2013, 06:27 PM

Quote:

Originally Posted by mstenholm

I already have a 120 mm fan laying on top of them. I decided to swap cards with another rigs cards since two 7700 doesn't produce much heat and hence would have less problem being placed next to each other but gave up since I got driver stops all the time with the 7700s when I swapped. I guess that I will swap the two 7970s around from time to time. The other (identical) one is running at 45 C. 20 degree difference is a lot.

I was getting the driver stops and crashes with my rig that has the 6850's in it. I disabled crossfire under Amd vision and the stops and crashes went away. I left the bridge connected to the cards so all I have to do is toggle on crossfire in the software when I need it.

mstenholm · Jan 20, 2013, 08:44 PM

Quote:

Originally Posted by ThE_MaD_ShOt

I was getting the driver stops and crashes with my rig that has the 6850's in it. I disabled crossfire under Amd vision and the stops and crashes went away. I left the bridge connected to the cards so all I have to do is toggle on crossfire in the software when I need it.

Thank you for the advice but as far as I know Crossfire is of. I blame it on the ATI drivers in general. Before WGC opened up for GPU I was 100 % in the other camp and never had a driver problem. Now I have problems everyday. I think that I still have one PC (retired but just waiting for me to put in a NVIDIA GPU into it) that newer say a ATI driver. I might test it tomorrow.

m&m's · Jan 24, 2013, 04:53 AM

Utility Update

What's new in Version 1.2.0?
Create the .xml file on desktop if BOINC is NOT installed in the default directory

Version 1.1.0

Spoiler

The utility now support Windows XP/Vista/Server 2008/Server 2008 R2/7/Server 2012/8
Please note that server versions are reported as desktop (Server 2012 is reported as 8, etc).
Require .NET Framework 4
I may also add Windows 2000 support if someone asks for it!
Please report any bug!

[Ion] · Jan 24, 2013, 02:14 PM

Cool, that's a great utility you've put together!

Win2k support seems useless---I don't think that anyone would be running an OS that is now 14 years old on a GPU that supports WCG

oldDirty · Feb 1, 2013, 11:28 PM

Try the tool several times, only get one working gpu Wu @ 7950..Win7 boinc client up to date.

Norton · Feb 1, 2013, 11:38 PM

Quote:

Originally Posted by oldDirty

Try the tool several times, only get one working gpu Wu @ 7950..Win7 boinc client up to date.

How long did you run it? Sometimes it needs to finish up a cpu task or two before it kicks in. You could also try:

- reboot
- expand the work buffer a little more (0.5 days or so)
- reset project (this should be a last resort)

oldDirty · Feb 2, 2013, 04:22 AM

Now boinc pass a very few CPU Wu last hours ago.
Anybody have the same Problem before?
Do i need change some settings in the manager?

[Ion] · Feb 2, 2013, 04:25 AM

What version of BOINC are you running? IIRC you need the 7.0.40+ version, not 7.0.28...
Can we see a screenshot of your BOINC manager and the text of the event log (Ctrl+Shift+E)?

oldDirty · Feb 2, 2013, 04:45 AM

Quote:

Originally Posted by [Ion]

What version of BOINC are you running? IIRC you need the 7.0.40+ version, not 7.0.28...
Can we see a screenshot of your BOINC manager and the text of the event log (Ctrl+Shift+E)?

That is what i see last minutes, i run the Beta before. Now it works, thx. solved.

[Ion] · Feb 2, 2013, 03:00 PM

Quote:

Originally Posted by oldDirty

That is what i see last minutes, i run the Beta before. Now it works, thx. solved.

Awesome!

Let us know if we can help you in any other manner

mstenholm · Feb 2, 2013, 03:32 PM

Quote:

Originally Posted by oldDirty

That is what i see last minutes, i run the Beta before. Now it works, thx. solved.

So are we going to see 100K per day (10 GPU units at the time)?

You got an better CPU then me and I can do 95K in average.

I managed to duplicate t_ski yesterday by running the most productive host. I think that all of the 3x7970 rigs had an off day but still my little workshop open box rig did come out on top.

Edit: Bangkok Crunching Team, well it all goes in the same pot.

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 @ 3.4 ghz 1.17 vcore \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Pro 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

System Name:	My Fortress/Trish (WCG-1)/Julia (WCG-2)/Junior (WCG-3)/Norton3 (WCG-4)/Lil' Ella (WCG-5)/Mr Foldy
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/i7-920/Xeon (6c/12t)
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill 1600/2x4GB Corsair 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/IGP/HD 7870/2xHD 7770's/2x GTX 580's
Hard Disk:	All Western Digital
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/Fractal XL Rev 2
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/X Gold 750
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Jan 19, 2013, 11:00 PM	#604
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.71/day) Thanks: 2,641 Thanked 2,518 Times in 1,507 Posts System Specs	Also my 6850's are running one each and they get right at 10 to 12k ppd per card. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

System Name:	Selene / Main / Xp Gaming rig
Processor:	Phenom II x6 1055t @ 3.5 / Phenom II x6 1090t @ 3.6 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	Spire TME III / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 2gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek HD7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 650 watt / Corsair TX 750 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Jan 19, 2013, 10:35 PM	#601
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,696 (1.52/day) Thanks: 4,438 Thanked 1,170 Times in 669 Posts System Specs	so any idea how a 6870 would fare with multiple work units? My rig should be together soon and i want to have my old rig set up to crunch 24/7 on the i5 2400/HD 6870 combo.

Jan 20, 2013, 12:22 AM	#609
johnspack Join Date: Oct 2007 Location: Nelson B.C. Canada Posts: 3,750 (1.80/day) Thanks: 283 Thanked 754 Times in 519 Posts System Specs	My gpu buffer is really getting loaded! Check your buffers gentlemen, we have a lot of crunching to do! Edit: got my eighth star!!! __________________ Heatware: http://www.heatware.com/eval.php?id=73875 Clan !! The Fighting 24th !! http://fxxiv.forumotion.ca/ Buy the games you like! Boycott the garbage! Cruncher: P6T Xeon ES W3570 6Gbs Ram 1xgtx285 1xgtx260 Last edited by johnspack; Jan 20, 2013 at 12:33 AM.

System Name:	Blacknet
Processor:	i7 950@ 4.1GHz
Motherboard:	Asus Rampage II Gene
Cooling:	Noctua NH-D14, 8 case fans
Memory:	24GB gskill ripjaws@ 1800mhz
Video Card:	Evga GTX480 + GTX285 Physx + TrackIR 5
Hard Disk:	WD Black 1TB 64mb cache + Spinpoint F1 750g backup + 2TB Seagate backup + 320GB Seagate backup
Optical Drive:	LG BH12LS38 Blu Ray burner
CRT/LCD Model:	Syncmaster 2443BW 1920x1200 Lcd + 19" ViewSonic Lcd
Case:	Antec 1200
Sound Card:	Onboard
PSU:	Silverstone 850Watt Strider+ Modular
Software:	Win7 x64 SP1 Ultimate
Benchmarks:	Time to upgrade to 680s....

Jan 20, 2013, 12:48 AM	#610
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,810 (6.71/day) Thanks: 2,641 Thanked 2,518 Times in 1,507 Posts System Specs	I upped my buffer today on the 7850 rig. It added about 1.5k more units to my buffer. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo “Feels like I am being punished by a team of dumbasses for being slighty more intelligent than a waffle!” -Arjai

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Jan 20, 2013, 04:31 PM	#614
stinger608 Eligible for custom title Join Date: Nov 2008 Location: Wyoming Posts: 5,516 (3.28/day) Thanks: 7,938 Thanked 2,556 Times in 1,794 Posts System Specs	I am actually thinking about selling my 6870 to grab a 7770 instead. The 7xxx series of cards crunch soooooooo much better than anything else. __________________ #3 Forever A Fan! Just Because I Don't Care Doesn't Mean I Don't Understand My HeatWare Check our team Status on Free-DC

System Name:	Sniper
Processor:	Intel Ivy Bridge i7 3770K
Motherboard:	Biostar TZ77A
Cooling:	total liquid cooling
Memory:	16GB Crucial Ballistix Tactical DDR3 1866
Video Card:	HIS HD7870 Turbo
Hard Disk:	2x Western Digital 300gb VRaptor HLFS Enterprise RAID 0
Optical Drive:	LG Super Multi Blue/Blue Ray burner
CRT/LCD Model:	HannsG HH231 23" & HP W2338H 23"
Case:	Cooler Master Sniper with side window
Sound Card:	On board
PSU:	Seasonic X series 750 watt total modular
Software:	Windows 7 Ultimate 64bit

Jan 24, 2013, 02:14 PM	#618
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,793 (7.86/day) Thanks: 8,305 Thanked 9,487 Times in 4,321 Posts System Specs	Cool, that's a great utility you've put together! Win2k support seems useless---I don't think that anyone would be running an OS that is now 14 years old on a GPU that supports WCG __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Feb 1, 2013, 11:28 PM	#619
oldDirty Join Date: Dec 2010 Posts: 16 (0.02/day) Thanks: 7 Thanked 11 Times in 5 Posts System Specs	Try the tool several times, only get one working gpu Wu @ 7950..Win7 boinc client up to date.

Processor:	3570K @ 4Ghz Air
Motherboard:	msi Z77-MPower
Cooling:	EKL Alpenföhn Matterhorn
Memory:	2x 4Gb Gskill RipjawsX 1333 @ 1866
Video Card:	HD7970 Crossfire HIS & Sapphire 1100/1700
Hard Disk:	Plextor M5Pro 128Gb & HD103SJ
Optical Drive:	LG HD-DVD-BD Read, DVD Burn
CRT/LCD Model:	Samsung 245B 24"
Case:	Lian Li B25F
Sound Card:	Sony MDR-DS6500
PSU:	Enermax Modu 87+ 600w
Software:	Win7 x64

Feb 2, 2013, 04:22 AM	#621
oldDirty Join Date: Dec 2010 Posts: 16 (0.02/day) Thanks: 7 Thanked 11 Times in 5 Posts System Specs	Now boinc pass a very few CPU Wu last hours ago. Anybody have the same Problem before? Do i need change some settings in the manager?

Feb 2, 2013, 04:25 AM	#622
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,793 (7.86/day) Thanks: 8,305 Thanked 9,487 Times in 4,321 Posts System Specs	What version of BOINC are you running? IIRC you need the 7.0.40+ version, not 7.0.28... Can we see a screenshot of your BOINC manager and the text of the event log (Ctrl+Shift+E)? __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is anyone have problems with invalid/inconclusive/error work units?	twilyth	World Community Grid (WCG)	10	Aug 26, 2010 08:26 PM
Laptop locks up when running multiple programs	Thrall	General Hardware	4	Jan 15, 2010 03:50 PM
CC config File Mod to report Work Units automatically	dustyshiv	World Community Grid (WCG)	17	Oct 14, 2009 05:39 PM
New Nvidia Work Units 5787-5798 released	BUCK NASTY	Folding@Home	9	Aug 21, 2009 09:57 AM
GPU-Z and multiple GPU's	[Daniel]	GPU-Z	8	Mar 30, 2009 04:55 PM