HyperSLI (Enabling SLI on non-sli motherboards)

[d1nky]

thank f**** for that the last ones well ooooomgggg!!

[gerard2500]

Hello,
I update to hypersli 0.96 but can't start sli with any of 310 driver i obtain a bsod on my P5q-E.

i return to 306.23 and no problem.

When i install hypersli 0.96 i have to stop my bitdefender.
with bitdefender stopped i can install it but there is always bsod after sli activated.

[hartsickdisciple]

I'm having some major issues with Hyper SLI 0.96 and Nvidia 310.90 drivers. I had the same issue with 306.9something (former version) as well. When I reboot my computer and try to boot into HyperSLI mode, I get a BSOD and my computer restarts. Here are my specs-

3570k @ 4.5ghz
Gigabyte Z77-D3H motherboard
2x BFG 9600GT's in SLI (I have a 560 Ti as my main GPU, I have the 9600's to test SLI on my board)
8GB Corsair DDR3-1600
Samsung 830 series 128GB SSD boot drive
WD Caviar Black 1TB storage drive
Windows Vista 64-bit SP2

Any ideas?

Update- HyperSLI works for me when I turn off virtualization in my BIOS. I get BSOD and system reset with virtualization turned on. Crysis Warhead isn't working (massive graphics corruption), but I was able to play Crysis 2.

[Mykee36]

Just downloaded and installed the 313.95 beta drivers. (for the Crysis 3 beta)
Ran a couple of games and benchmarks, no problems at bootup or with gameplay.
I have HyperSLI 9.6 installed.
Run HyperSli in hardware mode

i7 2600k
Windows 7
Motherboard: ASROCK P67 Pro3 SE
GTX 560ti SLI

[anatolymik]

Originally Posted by gerard2500

i obtain a bsod on my P5q-E

what BSOD do you get?

[anatolymik]

Originally Posted by hartsickdisciple

HyperSLI works for me when I turn off virtualization in my BIOS. I get BSOD and system reset with virtualization turned on. Crysis Warhead isn't working (massive graphics corruption), but I was able to play Crysis 2.

what BSOD. please take a shot.

[gerard2500]

hello anatolymik,

My system spec are :
Asus P5q-E P45 chipset
Core2Quad Q6600 @ 3.2Ghz
2 GTX 260-216 in sli with sli bridge (all ok until 306.23 included)
8 Go Ram
SSD and HDD
Windows 7 SP1 64bit
This is the bsod after new install of 310.90 drivers after 306.23 with hypersli 0.9 same result with 0.96. I install all includes 3d vision.
I noticed that this morning after this bsod when i reboot on non sli windows 7 i have a bsod too, until i reinstall 306.23.

Thks for your job and your reply anatolymik !!!

[anatolymik]

Originally Posted by gerard2500

hello anatolymik,

My system spec are :
Asus P5q-E P45 chipset
Core2Quad Q6600 @ 3.2Ghz
2 GTX 260-216 in sli with sli bridge (all ok until 306.23 included)
8 Go Ram
SSD and HDD
Windows 7 SP1 64bit
This is the bsod after new install of 310.90 drivers after 306.23 with hypersli 0.9 same result with 0.96. I install all includes 3d vision.
I noticed that this morning after this bsod when i reboot on non sli windows 7 i have a bsod too, until i reinstall 306.23.

Thks for your job and your reply anatolymik !!!

what did you try to solve the problem? did you try 306.97 and 310.33 drivers? what did you see?

[Manijak]

Here is my current status with HyperSLI 0.96

HyperSLi: 0.96
OS: Windows 8
Nvidia driver: 310.90
2x GeForce GTX 460


Works fine on most games. But I have noticed one thing: When booting for the first time, the PC hangs at the Windows 8 logo, right before you have to choose boot type (hypersli or normal). After restart, it boots properly. Then I get a dialog to send report to microsoft.

I also had to disable sleep mode in windows, the pc never woke up from it, had to restart.

[gerard2500]

To anatolymik.

This evening i try this.
I install hyper sli 0.96 on 306.23
try sli, works fine
sli off in nvidia control panel then install 306.97 in new install without 3d vision
Sli on, works fine
sli off then install 310.33 in new install without 3dvision
Sli on, works fine
sli off then install 310.90 in new install without 3dvision
Sli on, works fine.

It seem's to be 3dvision on my config.

I have to confirm however that i have to disconnect bitdefender to install hyper sli 0.96

[DiogoCDS19]

Originally Posted by Manijak

Here is my current status with HyperSLI 0.96

HyperSLi: 0.96
OS: Windows 8
Nvidia driver: 310.90
2x GeForce GTX 460


Works fine on most games. But I have noticed one thing: When booting for the first time, the PC hangs at the Windows 8 logo, right before you have to choose boot type (hypersli or normal). After restart, it boots properly. Then I get a dialog to send report to microsoft.

I also had to disable sleep mode in windows, the pc never woke up from it, had to restart.

That happened to myself before as well.
Go to page 58 of this thread and check RiC@RDOC post, thats the fix for that issue.

[dccorona]

I have hyperSLI running on windows 8 (0.96 version), and everything works perfectly fine...except for when the computer goes to sleep. It is very frequent but not 100% persistent, but if the computer has been asleep for long enough (usually after a half hour to an hour), it just shuts down.

Anyone else seeing this issue? I've tried to find it in this thread to no avail

[hartsickdisciple]

Originally Posted by anatolymik

what BSOD. please take a shot.

The BSOD is only onscreen for a split second and then the computer restarts. I don't know how I can take a shot of it.

[anatolymik]

Originally Posted by gerard2500

To anatolymik.

This evening i try this.
I install hyper sli 0.96 on 306.23
try sli, works fine
sli off in nvidia control panel then install 306.97 in new install without 3d vision
Sli on, works fine
sli off then install 310.33 in new install without 3dvision
Sli on, works fine
sli off then install 310.90 in new install without 3dvision
Sli on, works fine.

It seem's to be 3dvision on my config.

I have to confirm however that i have to disconnect bitdefender to install hyper sli 0.96

some antiviruses (avast for example) specially break the system when detect HyperSLI presence

[anatolymik]

Originally Posted by hartsickdisciple

The BSOD is only onscreen for a split second and then the computer restarts. I don't know how I can take a shot of it.

you have to choose "disable automatic restart on system failure" by pressing F8 key on HyperSLI boot option

[gerard2500]

anatolymik
i have to say that after hypersli 0.96 was installed. i could set bitdefender without problem it s just for install.
now my system seem stable if i don t install 3dvision no more bsod.
my set of gtx 260-216 was made of one 65nm and one 55 nm perhaps the problem.
i try farcry 3 and i have 98% use off each gpu and double my frame rate over 306.23i
thanks for your good work.

[SaZ]

Nvidia 313.96 Beta is out

Im running 313.96 Beta and HyperSli 0.96 everything seems fine

[Sukram]

Originally Posted by anatolymik

some antiviruses (avast for example) specially break the system when detect HyperSLI presence

My opinion:
... Avast Free: actual 0 (in words: sero!) problems :-)
... Avira Free: sometimes the CP was gone in the wide open digital universe, after restart sometimes was back again :-0

=> Are you sure with Avast?

BTW: Any news with virtual machines and HyperSLI?

Greetinx,

Sukram.

[red_stapler]

Gigabyte GA-MA790FXT-UD5P & GeForce 550Ti pair, using .96, 310.xx, and Windows 8 Pro x64 - working no problems!

[anatolymik]

Originally Posted by Sukram

My opinion:
... Avast Free: actual 0 (in words: sero!) problems :-)
... Avira Free: sometimes the CP was gone in the wide open digital universe, after restart sometimes was back again :-0

=> Are you sure with Avast?

BTW: Any news with virtual machines and HyperSLI?

Greetinx,

Sukram.

there was some version of avast which down the system when it detects HyperSLI. About virtual machines, i'm starting to work on this.

[gerard2500]

hello, anatolymik, today when i start my computer i have the same bsod with 310.90

I thinks there is perhaps a problem with bitdefender or my config with hypersli 0.96.

[anatolymik]

You boots ok if you have bitdefender off?

[gerard2500]

anatolymik , i try this
i disable antivirus of bitdefender total security 2012
i install 310.90 with new install without 3dvision
all ok. I activate SLI. all ok. I reboot first time no problem.
I reboot a second time, the same bsod
I restart in no hypersli windows, desactivate firewall of bidefender, reboot and bsod again
another reboot bsod again.
I install 306.97 run fine no bsod.
I will try to install new bitdefender 2013 to see if i have the same problem.

[gerard2500]

i install bitdefender 2013 same thing always bsod with 310.90 after reboot

i install the 313.96 drivers but i obtain the same bsod but during install and after reboot nvidia drivers are not installed.

here i turn on 306.97 no problem but no good sli in farcry 3

[anatolymik]

what HyperSLI mode you use?