World Community Grid February Team Challenge - Page 14

n3rdf1ght3r · Feb 10, 2013, 06:23 PM

Got a lot of red pocket money today due to Chinese new year =D hopping to get a 7770 to get some more points, or a camera, or a new lens... hmmm decisions :/

AlienIsGOD · Feb 10, 2013, 06:32 PM

Quote:

Originally Posted by n3rdf1ght3r

hopping to get a 7770 to get some more points, or a camera, or a new lens... hmmm decisions :/

go for a 7850/70, MOAR POWAH !!

SirKeldon · Feb 10, 2013, 10:52 PM

Quote:

Originally Posted by Bow

I have 1 WU per card on my 6950's for now, going to try and bump it up to 2 later today.

Quote:

Originally Posted by dude12564

I think n3rdf1ght3r's running 4 WUs on his 6950.

Just for the record, ATM i'm running my 6850 (clocked at 900/1200) with 4 WU's at once, taking 23 minutes approx to complete a WU. Don't know if i'm asking too much out of it, but it's doing a pretty good job.

BUCK NASTY · Feb 10, 2013, 11:06 PM

Quote:

Originally Posted by SirKeldon

Just for the record, ATM i'm running my 6850 (clocked at 900/1200) with 4 WU's at once, taking 23 minutes approx to complete a WU. Don't know if i'm asking too much out of it, but it's doing a pretty good job.

No error's? My 6850 is at 97% load with 2 WU's. Takes about 11 mins each, so our production is about the same. Not a big AMD fan, but how do I break the 850mhz barrier with this card(Overdrive & Afterburner stop @ 850Mhz)?

TRWOV · Feb 10, 2013, 11:08 PM

can't get more than 1 WU working on my 6950, keeps spitting errors if I try to run 2 or more. I see everyone is having success so I guess it's a W8 thing.

Just in case someone can help me these are the details:
HD6950 2GB stock
Core i5-2320 3.0Ghz turbo to 3.5Ghz
Boinc 7.0.44 beta <- W8 can only run 7.0.31beta or higher, there's no stable version compatible with W8
cat 13.2b5

SirKeldon · Feb 10, 2013, 11:15 PM

Quote:

Originally Posted by BUCK NASTY

No error's? My 6850 is at 97% load with 2 WU's. Takes about 11 mins each, so our production is about the same. Not a big AMD fan, but how do I break the 850mhz barrier with this card(Overdrive stops @ 850Mhz)?

I was just having "calculation errors" some weeks ago and thought it was my OC, though the games and all the other apps were running ok (OCCT GPU was not showing any error after 15 min test), retested it all and even @ stock settings i was still having BOINC "calculation errors" randomly within the GPU, but as far as i read in some forums, it was the drivers, i updated them to the 13.1 version and i didn't had any issue since then even reapplying the OC.

The other thing, my AMD Overdrive is not stopping at 850, i can hit 1000 MHz on core and 1250 on memory, came OC'd from factory at 790/1000, has some "voltage tweak" included (it's advertised in the box) ... maybe because of that? I can reboot to Windows and make a screenshot if you want. 935/1235 was the max stable i reached with 1,157V (GPU-Z tells that as i'm not manually tweaking the voltage)

Btw, running Windows 7 Ultimate x64 + BOINC 7.0.44 when GPU crunching

BUCK NASTY · Feb 10, 2013, 11:49 PM

Quote:

Originally Posted by SirKeldon

I was just having "calculation errors" some weeks ago and thought it was my OC, though the games and all the other apps were running ok (OCCT GPU was not showing any error after 15 min test), retested it all and even @ stock settings i was still having BOINC "calculation errors" randomly within the GPU, but as far as i read in some forums, it was the drivers, i updtated them to the 13.1 version and i didn't had any issue since then even reapplying the OC.

The other thing, my AMD Overdrive is not stopping at 850, i can hit 1000 MHz on core and 1250 on memory, came OC'd from factory at 790/1000, has some "voltage tweak" included (it's advertised in the box) ... maybe because of that? I can reboot to Windows and make a screenshot if you want. 935/1235 was the max stable i reached with 1,157V (GPU-Z tells that as i'm not manually tweaking the voltage)

Btw, running Windows 7 Ultimate x64 + BOINC 7.0.44 when GPU crunching

I found the Afterburner Config file adjustment online, so my Afterburner clocks are wide open now. Thanks!

Got her running 950/1200/1.2V @ 49C. Card runs super cool.

Bow · Feb 10, 2013, 11:53 PM

adulaamin · Feb 11, 2013, 12:05 AM

Good day! BOINC only runs 1 WU through the GPU since I set it up.

This is my app_config.xml file. I used the utility to create one.

<app_config>
<app>
<name>hcc1</name>
<max_concurrent>4</max_concurrent>
<gpu_versions>
<gpu_usage>0.250</gpu_usage>
<cpu_usage>1.000</cpu_usage>
</gpu_versions>
</app>
</app_config>

How do I get it to run at least 4 WU through the GPU? The max GPU load I get running 1 WU is 27% so I'd like to utilize more of the GPU

SirKeldon · Feb 11, 2013, 12:09 AM

Quote:

Originally Posted by adulaamin

Good day! BOINC only runs 1 WU through the GPU since I set it up.

http://img.techpowerup.org/130210/WCG2.jpg

This is my app_config.xml file. I used the utility to create one.

<app_config>
<app>
<name>hcc1</name>
<max_concurrent>4</max_concurrent>
<gpu_versions>
<gpu_usage>0.250</gpu_usage>
<cpu_usage>1.000</cpu_usage>
</gpu_versions>
</app>
</app_config>

How do I get it to run at least 4 WU through the GPU? The max GPU load I get running 1 WU is 27% so I'd like to utilize more of the GPU

From your image i can see that you're running BOINC Manager 6.10 which i think it was still not compatible with multi-gpu work, if you update to 7.0.40 or above (7.0.44 is available) keeping that config file i think you should be fine and using the 100% of your GPU.

adulaamin · Feb 11, 2013, 12:19 AM

Quote:

Originally Posted by SirKeldon

From your image i can see that you're running BOINC Manager 6.10 which i think it was still not compatible with multi-gpu work, if you update to 7.0.40 or above (7.0.44 is available) keeping that config file i think you should be fine and using the 100% of your GPU.

where do I download the 7.0.40 version? I downloaded the Manager I'm using now from the WCG website 3 days ago.

NVM... FOUND IT!

TRWOV · Feb 11, 2013, 01:14 AM

Octanux is gearing up for some crunching.

Farm pic:

catnipkiller · Feb 11, 2013, 03:57 AM

Rig#2 is now back up and running after all the work load ran out and i had to reset it. I had all 3 rigs going then my fuse blew so i'm sticking with 2 rigs for now lol.

xvi · Feb 11, 2013, 04:34 AM

Having an issue on an i7 860 + HD 5770 machine. CPU WUs start up no problem, but all the GPU WUs instantly fail saying "Computation error". I'd made no changes to any of the settings beyond what I set as my default profile.

Help pls?

Win 7 64-bit
HP Pavilion Elite HPE

Log after the spoiler.

Spoiler

Code:

10/02/2013 7:02:58 PM |  | No config file found - using defaults
10/02/2013 7:02:58 PM |  | Starting BOINC client version 7.0.28 for windows_x86_64
10/02/2013 7:02:58 PM |  | log flags: file_xfer, sched_ops, task
10/02/2013 7:02:58 PM |  | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
10/02/2013 7:02:58 PM |  | Data directory: C:\ProgramData\BOINC
10/02/2013 7:02:58 PM |  | Running under account Bri
10/02/2013 7:02:58 PM |  | Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz [Family 6 Model 30 Stepping 5]
10/02/2013 7:02:58 PM |  | Processor: 256.00 KB cache
10/02/2013 7:02:58 PM |  | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 nx lm vmx smx tm2 popcnt pbe
10/02/2013 7:02:58 PM |  | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00)
10/02/2013 7:02:58 PM |  | Memory: 7.96 GB physical, 15.92 GB virtual
10/02/2013 7:02:58 PM |  | Disk: 920.02 GB total, 738.27 GB free
10/02/2013 7:02:58 PM |  | Local time is UTC -8 hours
10/02/2013 7:02:58 PM |  | ATI GPU 0: ATI Radeon HD 5700 series (Juniper) (CAL version 1.4.1385, 1024MB, 991MB available, 2720 GFLOPS peak)
10/02/2013 7:02:58 PM | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 2292793; resource share 100
10/02/2013 7:02:58 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 7:02:58 PM | World Community Grid | Host location: none
10/02/2013 7:02:58 PM | World Community Grid | General prefs: using your defaults
10/02/2013 7:02:58 PM |  | Reading preferences override file
10/02/2013 7:02:58 PM |  | Preferences:
10/02/2013 7:02:58 PM |  | max memory usage when active: 6113.33MB
10/02/2013 7:02:58 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 7:02:58 PM |  | max disk usage: 10.00GB
10/02/2013 7:02:58 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 7:02:58 PM |  | Not using a proxy
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:13 PM | World Community Grid | Restarting task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:13 PM | World Community Grid | Restarting task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:13 PM | World Community Grid | Restarting task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:03:38 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 suspended by user
10/02/2013 7:03:47 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:48 PM | World Community Grid | Resuming task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:48 PM | World Community Grid | Resuming task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:48 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:04:43 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:04:43 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:04:46 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:04:46 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:06:41 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:06:41 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:06:43 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:06:43 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:10:18 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:10:18 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:10:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:10:20 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:17:45 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:17:45 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:17:48 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:17:48 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:24:12 PM |  | Windows is suspending operations
10/02/2013 7:24:13 PM |  | Suspending computation - requested by operating system
10/02/2013 7:24:13 PM |  | Suspending network activity - requested by operating system
10/02/2013 7:24:23 PM |  | Resuming after OS suspension
10/02/2013 9:17:09 PM |  | Resuming computation
10/02/2013 9:17:09 PM |  | Resuming network activity
10/02/2013 9:17:09 PM |  | Windows is resuming operations
10/02/2013 9:17:09 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 9:17:09 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 9:17:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 9:17:20 PM | World Community Grid | Server error: feeder not running
10/02/2013 9:25:55 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:25:55 PM | World Community Grid | Host location: none
10/02/2013 9:25:55 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:25:55 PM |  | Reading preferences override file
10/02/2013 9:25:55 PM |  | Preferences:
10/02/2013 9:25:55 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:25:55 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:25:55 PM |  | max disk usage: 10.00GB
10/02/2013 9:25:55 PM |  | Number of usable CPUs has changed from 8 to 6.
10/02/2013 9:25:55 PM |  | max CPUs used: 6
10/02/2013 9:25:55 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:25 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:30:25 PM | World Community Grid | Host location: none
10/02/2013 9:30:25 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:30:25 PM |  | Reading preferences override file
10/02/2013 9:30:25 PM |  | Preferences:
10/02/2013 9:30:25 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:30:25 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:30:25 PM |  | max disk usage: 10.00GB
10/02/2013 9:30:25 PM |  | Number of usable CPUs has changed from 6 to 8.
10/02/2013 9:30:25 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:26 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 9:30:26 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7

I did see the "Down for maintenance message" entry, but why do I have a big list of WUs that all failed?
Also, in the screenshot, I have yet to apply the "100% of CPU cores" setting, so only 6 threads are active. Eight are active now.

Edit: Derp. Trying new drivers.

Second edit: Latest drivers, getting this:

Code:

10/02/2013 10:01:20 PM | World Community Grid | Sending scheduler request: Requested by user.
10/02/2013 10:01:20 PM | World Community Grid | Requesting new tasks for CPU and ATI
10/02/2013 10:01:22 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 10:01:22 PM | World Community Grid | Server error: feeder not running

Norton · Feb 11, 2013, 05:03 AM

Quote:

Originally Posted by xvi

Having an issue on an i7 860 + HD 5770 machine. CPU WUs start up no problem, but all the GPU WUs instantly fail saying "Computation error". I'd made no changes to any of the settings beyond what I set as my default profile.

Help pls?

Win 7 64-bit
HP Pavilion Elite HPE

Log after the spoiler.

Spoiler

Code:

10/02/2013 7:02:58 PM |  | No config file found - using defaults
10/02/2013 7:02:58 PM |  | Starting BOINC client version 7.0.28 for windows_x86_64
10/02/2013 7:02:58 PM |  | log flags: file_xfer, sched_ops, task
10/02/2013 7:02:58 PM |  | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
10/02/2013 7:02:58 PM |  | Data directory: C:\ProgramData\BOINC
10/02/2013 7:02:58 PM |  | Running under account Bri
10/02/2013 7:02:58 PM |  | Processor: 8 GenuineIntel Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz [Family 6 Model 30 Stepping 5]
10/02/2013 7:02:58 PM |  | Processor: 256.00 KB cache
10/02/2013 7:02:58 PM |  | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 nx lm vmx smx tm2 popcnt pbe
10/02/2013 7:02:58 PM |  | OS: Microsoft Windows 7: Home Premium x64 Edition, Service Pack 1, (06.01.7601.00)
10/02/2013 7:02:58 PM |  | Memory: 7.96 GB physical, 15.92 GB virtual
10/02/2013 7:02:58 PM |  | Disk: 920.02 GB total, 738.27 GB free
10/02/2013 7:02:58 PM |  | Local time is UTC -8 hours
10/02/2013 7:02:58 PM |  | ATI GPU 0: ATI Radeon HD 5700 series (Juniper) (CAL version 1.4.1385, 1024MB, 991MB available, 2720 GFLOPS peak)
10/02/2013 7:02:58 PM | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 2292793; resource share 100
10/02/2013 7:02:58 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 7:02:58 PM | World Community Grid | Host location: none
10/02/2013 7:02:58 PM | World Community Grid | General prefs: using your defaults
10/02/2013 7:02:58 PM |  | Reading preferences override file
10/02/2013 7:02:58 PM |  | Preferences:
10/02/2013 7:02:58 PM |  | max memory usage when active: 6113.33MB
10/02/2013 7:02:58 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 7:02:58 PM |  | max disk usage: 10.00GB
10/02/2013 7:02:58 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 7:02:58 PM |  | Not using a proxy
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:13 PM | World Community Grid | Restarting task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:13 PM | World Community Grid | Restarting task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:13 PM | World Community Grid | Restarting task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:13 PM | World Community Grid | Restarting task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:03:38 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 suspended by user
10/02/2013 7:03:39 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 suspended by user
10/02/2013 7:03:47 PM | World Community Grid | task DSFL_00050-43_0000021_0508_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0903_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0777_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000022_0833_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0464_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0070_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0061_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0104_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0601_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073885_0092_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073883_0043_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0114_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0079_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_1031_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task SN2S_CAA67208_0000096_0182_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | task DSFL_00050-43_0000021_0876_1 resumed by user
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0508_1 using dsfl version 625 in slot 0
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0070_1 using dsfl version 625 in slot 1
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000022_0833_1 using dsfl version 625 in slot 2
10/02/2013 7:03:48 PM | World Community Grid | Resuming task SN2S_CAA67208_0000096_0903_1 using sn2s version 620 in slot 3
10/02/2013 7:03:48 PM | World Community Grid | Resuming task E211774_604_C.33.C28H15N3O2.01322587.4.set1d06_1 using cep2 version 640 in slot 4
10/02/2013 7:03:48 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0777_1 using dsfl version 625 in slot 6
10/02/2013 7:03:48 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7
10/02/2013 7:04:43 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:04:43 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:04:46 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:04:46 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:06:41 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:06:41 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:06:43 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:06:43 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:10:18 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:10:18 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:10:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:10:20 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:17:45 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 7:17:45 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 7:17:48 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 7:17:48 PM | World Community Grid | Project is temporarily shut down for maintenance
10/02/2013 7:24:12 PM |  | Windows is suspending operations
10/02/2013 7:24:13 PM |  | Suspending computation - requested by operating system
10/02/2013 7:24:13 PM |  | Suspending network activity - requested by operating system
10/02/2013 7:24:23 PM |  | Resuming after OS suspension
10/02/2013 9:17:09 PM |  | Resuming computation
10/02/2013 9:17:09 PM |  | Resuming network activity
10/02/2013 9:17:09 PM |  | Windows is resuming operations
10/02/2013 9:17:09 PM | World Community Grid | Sending scheduler request: To fetch work.
10/02/2013 9:17:09 PM | World Community Grid | Reporting 20 completed tasks, requesting new tasks for CPU and ATI
10/02/2013 9:17:20 PM | World Community Grid | Scheduler request completed: got 0 new tasks
10/02/2013 9:17:20 PM | World Community Grid | Server error: feeder not running
10/02/2013 9:25:55 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:25:55 PM | World Community Grid | Host location: none
10/02/2013 9:25:55 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:25:55 PM |  | Reading preferences override file
10/02/2013 9:25:55 PM |  | Preferences:
10/02/2013 9:25:55 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:25:55 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:25:55 PM |  | max disk usage: 10.00GB
10/02/2013 9:25:55 PM |  | Number of usable CPUs has changed from 8 to 6.
10/02/2013 9:25:55 PM |  | max CPUs used: 6
10/02/2013 9:25:55 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:25 PM | World Community Grid | General prefs: from World Community Grid (last modified 08-Feb-2013 12:29:53)
10/02/2013 9:30:25 PM | World Community Grid | Host location: none
10/02/2013 9:30:25 PM | World Community Grid | General prefs: using your defaults
10/02/2013 9:30:25 PM |  | Reading preferences override file
10/02/2013 9:30:25 PM |  | Preferences:
10/02/2013 9:30:25 PM |  | max memory usage when active: 6113.33MB
10/02/2013 9:30:25 PM |  | max memory usage when idle: 7336.00MB
10/02/2013 9:30:25 PM |  | max disk usage: 10.00GB
10/02/2013 9:30:25 PM |  | Number of usable CPUs has changed from 6 to 8.
10/02/2013 9:30:25 PM |  | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager)
10/02/2013 9:30:26 PM | World Community Grid | Resuming task GFAM_x1Z6B_LoopsNotAdded_PfFabZ_0073884_0217_1 using gfam version 612 in slot 5
10/02/2013 9:30:26 PM | World Community Grid | Resuming task DSFL_00050-43_0000021_0464_1 using dsfl version 625 in slot 7

I did see the "Down for maintenance message" entry, but why do I have a big list of WUs that all failed?
Also, in the screenshot, I have yet to apply the "100% of CPU cores" setting, so only 6 threads are active. Eight are active now.

Edit: Derp. Trying new drivers.

Make sure the OpenCl driver is selected with the driver package installation- confirm installation with GPUZ

Check this and post back

xvi · Feb 11, 2013, 05:07 AM

Quote:

Originally Posted by Norton

Make sure the OpenCl driver is selected with the driver package installation- confirm installation with GPUZ

Check this and post back

Wait.. Apparently there's a scheduled outage?

I did the "Custom" install and made sure any sort of accelerated computing options were checked. Checked in GPU-z and OpenCL is checked. I tried resetting the project, so now I have no WUs.

Norton · Feb 11, 2013, 05:11 AM

Quote:

Originally Posted by xvi

Wait.. Apparently there's a scheduled outage?

I did the "Custom" install and made sure any sort of accelerated computing options were checked. Checked in GPU-z and OpenCL is checked. I tried resetting the project, so now I have no WUs.

The outage should be done in about 2 or 3 hours (maybe sooner) so you will need to wait a bit to see if the problem is still there.

What driver are you using? Note- I use 12.6, they are very stable for me but YMMV

xvi · Feb 11, 2013, 05:27 AM

Quote:

Originally Posted by Norton

The outage should be done in about 2 or 3 hours (maybe sooner) so you will need to wait a bit to see if the problem is still there.

What driver are you using? Note- I use 12.6, they are very stable for me but YMMV

13.1. We'll see. I won't have direct physical access to this computer for a while after tonight, but I can give orders through the phone. At worst, 8 threads a crunchin' is nothing to scoff at.

This machine was originally using the drivers pre-installed from HP. Thinking about it now, I'm not surprised it failed.

EDIT: CRUNCHING ON GPU! Drivers were it.

HammerON · Feb 11, 2013, 06:50 AM

Both rigs have updated

Looks like the outage is over

mauriek · Feb 11, 2013, 11:30 AM

Finally finished with the cruncher rig assembly and installation, just sit back and watch, i wonder how much FX8320 + GTX670 (4WU GPU) and Phenom II X4 + 7870 (2WU GPU) will give me point.

I'm going to buy new 550w PSU tomorrow for the 7870 and try 4 WU, because i plan to keep it crunching for a long time after the contest over.

Norton · Feb 11, 2013, 11:42 AM

Quote:

Originally Posted by mauriek

Finally finished with the cruncher rig assembly and installation, just sit back and watch, i wonder how much FX8320 + GTX670 (4WU GPU) and Phenom II X4 + 7870 (2WU GPU) will give me point.

I'm going to buy new 550w PSU tomorrow for the 7870 and try 4 WU, because i plan to keep it crunching for a long time after the contest over.

You should be able to get 8-10 gpu wu's out of a 7870... both of mine are running 10 atm

[Ion] · Feb 11, 2013, 12:28 PM

Quote:

Originally Posted by Norton

You should be able to get 8-10 gpu wu's out of a 7870... both of mine are running 10 atm

Ten?? I do ten with the HD7950

Once i get more CPU cores available, I guess I'll try a dozen on the Tahiti cards and eight on the HD7850

Norton · Feb 11, 2013, 12:31 PM

Quote:

Originally Posted by [Ion]

Ten?? I do ten with the HD7950

Once i get more CPU cores available, I guess I'll try a dozen on the Tahiti cards and eight on the HD7850

FX-8 chips are pretty decent work horses for this sort of thing

EDIT-

Quick tip for any new crunchers.....

If you enable "show hosts" in your WCG profile you can monitor the performance of your systems (each rig) through sites like FreeDC or BOINCStats

This setting from the WCG profile (last selection on the page):

It's off by default but most of us turn it on to be able to watch our output with a little better detail.

KrisC · Feb 11, 2013, 01:58 PM

Wow getting 25k was a breeze.

TRWOV · Feb 11, 2013, 02:29 PM

Is there a way to restrict what kind of work a device gets? My CPU cruncher is getting several HCC units and they take about 3 hours to complete. I'd rather do CPU-only units there.

EDIT: NVM, I found it. Had to setup a custom profile.

Feb 10, 2013, 06:23 PM	#326
n3rdf1ght3r Join Date: Feb 2012 Location: Toronto, Ontario, Canada Posts: 213 (0.46/day) Thanks: 134 Thanked 157 Times in 63 Posts System Specs	Got a lot of red pocket money today due to Chinese new year =D hopping to get a 7770 to get some more points, or a camera, or a new lens... hmmm decisions :/ __________________ CPU crunchers- (12 Cores + 18 Threads) i7 960/i5 3210m/C2Q QX6700/PD 935 GPU crunchers- (864 CUDA cores + 1408 Shaders) GTX 570/GTX 650m/Radeon 6950 FREE ARMA III KEYS!

System Name:	Spartan / Crunch (WCG #1) / MT-N56VZ
Processor:	Intel I7 960 OC @ 4GHz / Intel Core 2 Quad QX6700 @ 3GHz / Intel Core i5 3210M
Motherboard:	Gigabyte G.1 Guerilla / ASUS P5N-D / IDK its a laptop /
Cooling:	Coolermaster V8 / Coolermaster Hyper 101i / Laptop
Memory:	12gb G.Skill DDR3 1333MHz / 2 x 2GB Partiot DDR2 800MHzMHz / 8GB some brand 1333MHz
Video Card:	ASUS Geforce GTX570 Direct CU II / Gigabyte Radeon 6950 2GB / NVIDIA GTX 650M
Hard Disk:	Kingston SSDnow V100 128GB, Seagate barracuda 1TB, Seagate barracuda 750GB / 250GB Western Digital /
Optical Drive:	LG 24x RW / LG 24X RW / ASUS blu-ray read only
CRT/LCD Model:	2X ACER S232HL / none / ASUS 15.6" IPS
Case:	Thermaltake Amour A90(modded) / InWin Griffin / NA
Sound Card:	Creative X-Fi sound blaster / Onboard / Bang & Olufsen ICEpower
PSU:	600W OCZ MODXSTREAM PRO / 600W Corsair Builder / LAPTOP
Software:	Windows 7 Ultimate x64 / Windows 8 Pro x64 / Windows 7 Pro x64

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 @ 3.4 ghz 1.17 vcore \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

System Name:	macJuiced Pro (LiquidMac i5)
Processor:	Intel Core i5 2500K @ 4.11 GHz (1,260V idle - 1,248V load)
Motherboard:	Gigabyte GA-Z68XP-UD4 (F6 BIOS)
Cooling:	Phobya DC12-400 + Swiftech Apogee XT rev2 + MCW82 GPU + MCR-220XP (push->pull) + Micro Res v2
Memory:	16GB (4x4GB) Kingston HyperX DDR3 @ 1600Mhz (9-9-9-24 @ 1.65V)
Video Card:	Asus Radeon EAH6850 1GB DDR5 DirectCU (OC'd from factory @ 790MHz/1000MHz)
Hard Disk:	WD Caviar Black (1x1TB SATA3) + Seagate Barracuda (1x1TB SATA II + 1x2TB eSATA III)
Optical Drive:	Hitachi LG DVDRAM GH20NS10
CRT/LCD Model:	LG IPS231 1920x1080 @ 60Hz
Case:	PowerMac G5 Modded (Late 2005 version)
Sound Card:	Realtek ALC889 w/ Tritton PC510HDa // Native Instruments Audio Kontrol 1 w/ Logitech Speakers
PSU:	Thermaltake Toughpower XT 775W
Software:	MacOS X 10.7.5 "Lion" // Windows 7 Ultimate

System Name:	Main Rig
Processor:	AMD Phenom II x4 B93 @ 3.82Ghz
Motherboard:	ASUS M5A99X Evo
Cooling:	Coolermaster Hyper 212+
Memory:	8GB GSkill DDR3 1600
Video Card:	ASUS GTX460 Top DirectCU
Hard Disk:	Corsair Force 90gb SSD
Optical Drive:	ASUS CD/DVD RW
CRT/LCD Model:	ASUS 24" LCD
Case:	Coolermaster Centurion 590
Sound Card:	Onboard
PSU:	Antec TP750 80+
Software:	Windows 7 Ultimate 64

Feb 10, 2013, 11:08 PM	#330
TRWOV Join Date: Aug 2011 Location: Mexico Posts: 2,064 (3.16/day) Thanks: 797 Thanked 1,071 Times in 556 Posts System Specs	can't get more than 1 WU working on my 6950, keeps spitting errors if I try to run 2 or more. I see everyone is having success so I guess it's a W8 thing. Just in case someone can help me these are the details: HD6950 2GB stock Core i5-2320 3.0Ghz turbo to 3.5Ghz Boinc 7.0.44 beta <- W8 can only run 7.0.31beta or higher, there's no stable version compatible with W8 cat 13.2b5 __________________ My other rigs: OCTANUX - Conroe865PE - QX6800 - 4GB OCZ Platinum EL - HIS HD4670 AGP - SB Audigy 2 ZS - BFG PPU phenomenal - AM2NF3-VSTA - 965BE - 8GB OCZ Platinum LV - HIS HD3850 AGP - SB X-Fi - Asus PPU - WIP Green Tea - 939A8X-M - FX60 - 4GB OCZ Platinum EL - 7950GT AGP Re-build - CT-6VTA2 - PIII 600E - 384MB PC133 - Voodoo 5500 AGP - SB16 ISA BLUELINE - H61M-GE - PDC G645 - 8GB DDR3-1333 - Powercolor HD7750 - 2xTV Wonder 650

System Name:	Sandy Bridged 3rd Take
Processor:	Core i5-2320 @ 3.5Ghz
Motherboard:	GYGABYTE GA-Z77X-UD3H
Cooling:	Antec Kuhler H2O 620
Memory:	2x4GB A-DATA XPG 1600GS
Video Card:	ATi RADEON HD7870 2GB / Zotac GT430
Hard Disk:	500GB WD / 64GB Samsung SSD (SRT cache) / 2TB Seagate
Optical Drive:	Samsung SH-B123A Blu-ray/DVD-RW
CRT/LCD Model:	Acer V223W 22" LCD 1680x1050
Case:	Cooler Master Gladiator 600
PSU:	Cooler Master Silent Pro M 700w
Software:	Windows 8 Pro with Media Center
Benchmarks:	3dmark11 7925, IBT 90Gflops

Feb 10, 2013, 11:53 PM	#333
Bow Join Date: Jul 2008 Location: South Colton, New York Posts: 1,658 (0.94/day) Thanks: 757 Thanked 664 Times in 401 Posts System Specs	__________________ "I didn't want my Mom to know I was drag racing for 20 years so I told her I was in prison."

System Name:	SLO-MO-SHUN
Processor:	AMD Phenom II X6 1100T 3.97ghz
Motherboard:	MSI 990FXA-GD80 AM3+ AMD 990FX
Cooling:	CORSAIR CWCH50-1 High Performance Water Cooler
Memory:	G.Skill Ripjaws 8 GB (2 x 4 GB) DDR3 1600
Video Card:	SAPPHIRE HD 7970 3GB GDDR5 Twin Fan
Hard Disk:	SEAGATE Barracuda 7200 RPM 1TB, OCZ Vertex2 60GB SSD
Optical Drive:	ASUS DRW 24B1ST SATA 24X DVD Burner
CRT/LCD Model:	ASUS VH238H 24" 1080P 2MS HDMI LCD
Case:	AZZA Hurrican 2000
Sound Card:	MSI Onboard/Realtek
PSU:	XFX Black Edition XPS-850W 80 Plus Silver
Software:	MICROSOFT Windows 7, 64 Bit

Feb 11, 2013, 12:05 AM	#334
adulaamin Join Date: Aug 2009 Location: Philippines Posts: 397 (0.28/day) Thanks: 1,004 Thanked 99 Times in 67 Posts System Specs	Good day! BOINC only runs 1 WU through the GPU since I set it up. This is my app_config.xml file. I used the utility to create one. <app_config> <app> <name>hcc1</name> <max_concurrent>4</max_concurrent> <gpu_versions> <gpu_usage>0.250</gpu_usage> <cpu_usage>1.000</cpu_usage> </gpu_versions> </app> </app_config> How do I get it to run at least 4 WU through the GPU? The max GPU load I get running 1 WU is 27% so I'd like to utilize more of the GPU

System Name:	hmmm...
Processor:	i7 3770K
Motherboard:	Asus Maximus V Gene
Cooling:	CM Hyper 212 EVO w/ AP-29s in push/pull
Memory:	4x4gb DDR3 1600mhz G-Skill Ripjaws-X
Video Card:	PowerColor HD7970
Hard Disk:	OCZ Vertex 4 256gb + 2x1tb WD10EARS + 1x2tb WD10EARS
Optical Drive:	None
CRT/LCD Model:	Samsung Syncmaster 226BW
Case:	Fractal Design Define Mini w/ 3 AP-30s intake and 1 AP-30 outtake
Sound Card:	Onboard+Logitech Z623
PSU:	Corsair AX650
Software:	Windows 7 Professional x64

Feb 11, 2013, 01:14 AM	#337
TRWOV Join Date: Aug 2011 Location: Mexico Posts: 2,064 (3.16/day) Thanks: 797 Thanked 1,071 Times in 556 Posts System Specs	Octanux is gearing up for some crunching. Farm pic: __________________ My other rigs: OCTANUX - Conroe865PE - QX6800 - 4GB OCZ Platinum EL - HIS HD4670 AGP - SB Audigy 2 ZS - BFG PPU phenomenal - AM2NF3-VSTA - 965BE - 8GB OCZ Platinum LV - HIS HD3850 AGP - SB X-Fi - Asus PPU - WIP Green Tea - 939A8X-M - FX60 - 4GB OCZ Platinum EL - 7950GT AGP Re-build - CT-6VTA2 - PIII 600E - 384MB PC133 - Voodoo 5500 AGP - SB16 ISA BLUELINE - H61M-GE - PDC G645 - 8GB DDR3-1333 - Powercolor HD7750 - 2xTV Wonder 650

Feb 11, 2013, 03:57 AM	#338
catnipkiller Join Date: Apr 2010 Location: canada Posts: 1,059 (0.93/day) Thanks: 340 Thanked 474 Times in 326 Posts System Specs	Rig#2 is now back up and running after all the work load ran out and i had to reset it. I had all 3 rigs going then my fuse blew so i'm sticking with 2 rigs for now lol. __________________ MyHeatWare My FS/FT

System Name:	INTEL/AMD
Processor:	I7 920@3.8GHZ / 1100T@3.8GHZ(on air)
Motherboard:	ASROCK Extream x58 / GIGABYTE GA-990FXA-UD3
Cooling:	Rasa 450 RS120 with dcc pump / zalmen 9900 cooler
Memory:	2x4 gb 1600 / 4x4gb 1600
Video Card:	XFX 7950 DD / XFX 5750
Hard Disk:	2xcorsair ssd 120gb raid0 /2x adata ssd 120gb
Optical Drive:	lg
CRT/LCD Model:	50 inch plasma / 22inch acer
Case:	Bitfenix Merc Beta / Anteck 900 moded
Sound Card:	ASUS xomar DGX
PSU:	Enermax 800EWT / 750 zalman
Software:	win 7 64bit untimate pro edtion ftw

System Name:	Phoenix
Processor:	AMD Phenom II X6 1100T @ 3.7GHz
Motherboard:	DFI LanParty DK 790FXB-M3H5
Cooling:	Xigmatek S-1283 Push/Pull
Memory:	G.SKILL 2x2GB DDR3-1600//G.SKILL 2x4GB DDR3-1600
Video Card:	ASUS OEM Radeon HD 5870
Hard Disk:	2x Segate Barracuda 7200.10 250GB in RAID0
Optical Drive:	Sony DVD+-RW
CRT/LCD Model:	Samsung SyncMaster 2343 (23" 2048x1152)
Case:	Thermaltake Xaser II (Ancient)
Sound Card:	Realtek ALC-885 driving a Logitech z-5500
PSU:	BFG LS-550 (Never buying from them again)
Software:	Windows 7 Ultimate

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Feb 11, 2013, 06:50 AM	#344
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,371 (2.83/day) Thanks: 3,987 Thanked 2,883 Times in 1,546 Posts System Specs	Both rigs have updated Looks like the outage is over

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Feb 11, 2013, 11:30 AM	#345
mauriek Join Date: Jan 2007 Location: Mataram-Indonesia Posts: 132 (0.06/day) Thanks: 42 Thanked 48 Times in 28 Posts System Specs	Finally finished with the cruncher rig assembly and installation, just sit back and watch, i wonder how much FX8320 + GTX670 (4WU GPU) and Phenom II X4 + 7870 (2WU GPU) will give me point. I'm going to buy new 550w PSU tomorrow for the 7870 and try 4 WU, because i plan to keep it crunching for a long time after the contest over.

System Name:	Folding System
Processor:	AMD FX 8150 4.2Ghz \| Intel 2600K Sandy Bridge
Motherboard:	MSI 990FXA GD80 \| Asrock Z68 Extreme7 Gen3
Cooling:	Corsair H100 \| EK Supremacy WB + EK CoolStream RAD XTX 360 + EK GTX670 Full Cover WB
Memory:	4 x 4 GB DDR3 GSkill Ripjaws F3 17000 GBZL \| 4 x 4GB DDR3 Corsair Dominator
Video Card:	PowerColor AMD 7870 Myst 2GB \| 2 x Leadtek WinFast GeForce GTX 670 2GB SLI
Hard Disk:	2x Patriot Pyro 240GB Raid 0 \| 4x Hitachi 1TB Raid 0 \| 4x Seagate 2TB Raid 0
Optical Drive:	DVDRW Benq DW1800/Samsung DVDRW Sata
CRT/LCD Model:	Viewsonic LCD VP171b 17" / BenQ LCD G925HD 18,5" / Dell U2312HM 23" IPS Panel
Case:	Xigmatek Elysium + 3 NZXT 14cm Fan, 3 Coolermaster 12cm, 3 Scythe Jyunii Slim 12cm, 3 Gelid 12cm
Sound Card:	Audiotrak Prodigy X-Fi 7.1 + Sennheiser HD600 + Beyerdynamics XP3
PSU:	Enermax NAXN 450 + Thermaltake Power Express 650w \| Seasonic P-860 Platinum
Software:	Windows 7 Ultimate 64

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Feb 11, 2013, 01:58 PM	#349
KrisC Join Date: Mar 2009 Location: Sault Ste Marie Ont. Canada Posts: 26 (0.02/day) Thanks: 0 Thanked 13 Times in 9 Posts	Wow getting 25k was a breeze.

System Name:	The Dutch Rudder
Processor:	i5 3570k @ 4.6ghz
Motherboard:	MSI Z77IA-E53
Cooling:	Corsair H80i
Memory:	2x8gb Kingtson HyperX 1600mhz
Video Card:	Galaxy GTX 680
Hard Disk:	120gb OCZ Agility 3, 240gb Corsair Neutron, 500gb WD black Scorpio/60gb Vertex 2 SSD Cache
Optical Drive:	who needs one?
CRT/LCD Model:	Asus 25.5"
Case:	Coolermast Elite 120 Advanced mITX
Sound Card:	Onboard
PSU:	Corsair HX1050
Software:	Windows 7 Ultimate

Feb 11, 2013, 02:29 PM	#350
TRWOV Join Date: Aug 2011 Location: Mexico Posts: 2,064 (3.16/day) Thanks: 797 Thanked 1,071 Times in 556 Posts System Specs	Is there a way to restrict what kind of work a device gets? My CPU cruncher is getting several HCC units and they take about 3 hours to complete. I'd rather do CPU-only units there. EDIT: NVM, I found it. Had to setup a custom profile. __________________ My other rigs: OCTANUX - Conroe865PE - QX6800 - 4GB OCZ Platinum EL - HIS HD4670 AGP - SB Audigy 2 ZS - BFG PPU phenomenal - AM2NF3-VSTA - 965BE - 8GB OCZ Platinum LV - HIS HD3850 AGP - SB X-Fi - Asus PPU - WIP Green Tea - 939A8X-M - FX60 - 4GB OCZ Platinum EL - 7950GT AGP Re-build - CT-6VTA2 - PIII 600E - 384MB PC133 - Voodoo 5500 AGP - SB16 ISA BLUELINE - H61M-GE - PDC G645 - 8GB DDR3-1333 - Powercolor HD7750 - 2xTV Wonder 650

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
February World Community Grid Team Challenge Planning!	[Ion]	World Community Grid (WCG)	55	Feb 4, 2013 04:58 AM
TechPowerUp World Community Grid Team Among World Top 20	btarunr	News	32	Dec 9, 2012 04:50 AM
TechPowerUp Announces November World Community Grid Challenge	btarunr	News	9	Nov 1, 2012 06:25 AM
TechPowerUp World Community Grid Team Contest Announcement	btarunr	News	49	Sep 14, 2009 07:25 PM
Team page at World Community Grid	Paulieg	World Community Grid (WCG)	14	Aug 20, 2009 02:36 PM