TPU's WCG/BOINC Team - Page 873

ThE_MaD_ShOt · Feb 21, 2013, 06:57 PM

Yes it's not the watts but the amps that are getting you. Each "side" of your dorm room (yours then your roomates) are probably on a 15 to 20 amp breaker. You may want to check the amps your pulling at the plug on each rig. I usually limit my rigs to 2 rigs per breaker. I like to leave head room so it doesn't heat up the breaker.

Oh and 1800 watts is about the max on one line/side/breaker of your dorm room at standard amp draw in a perfect world.

[Ion] · Feb 21, 2013, 07:34 PM

There's no way to do two rigs/breaker--that would limit me to a total of four systems. I've moved the Xeon DP/dual-GPU system and the i3/HD7950 to the roommate's breaker, so that should even things up a bit.

Norton · Feb 21, 2013, 07:49 PM

Quote:

Originally Posted by [Ion]

There's no way to do two rigs/breaker--that would limit me to a total of four systems. I've moved the Xeon DP/dual-GPU system and the i3/HD7950 to the roommate's breaker, so that should even things up a bit.

Time to start upgrading your psu's to 80+ silver/gold (bronze at a minimum) you could drop your load on the circuit by about 10% even if you just upgrade 2 or 3 of your rigs with the heaviest loads.

and no that does not mean you can run even MOAR rigs once that's done

ThE_MaD_ShOt · Feb 21, 2013, 08:00 PM

Also you need to be mindful of the other things in the room on the lines. That refridge can easily spike 8 to 10 amps when the compressor starts. Also pulling to many amps can heat the breaker and doing that for a prolong period has the possibility of ending very bad for you or others in the building. Also the wire in the wall to the outlets also has a rating on it and you could be overheating it. Think of it like the Christmas light commercial where the people had a crap ton of light plugged into one outlet with all the splitters. Didn't end very well as the overheated the outlet and it sparked and caught fire. I had 4 rigs on a power strip for a week or 2. When I moved my rigs around I looked at the outlet and you can see where it started getting dark where the power strip was pluged into it and the power strips plug had heat damage. That was just 4 rigs, 3 where x4's and one was an x2 and this was before the gpu units. All crunching and all out fitted with low power gpu's ( hd3650's, onboard hd4200, and a 7300 gt).

All I am saying is be careful. It's great you want to have as many crunchers as you do, they just need to be spread out across more breakers. I don't want to come in here one day and find out something not good happend to you man.

[Ion] · Feb 21, 2013, 08:04 PM

Quote:

Originally Posted by Norton

Time to start upgrading your psu's to 80+ silver/gold (bronze at a minimum) you could drop your load on the circuit by about 10% even if you just upgrade 2 or 3 of your rigs with the heaviest loads.

and no that does not mean you can run even MOAR rigs once that's done

Yeah, I have a couple systems that are running PSus that aren't even 80+ certified (the 3930k, an i7, a C2D, and the AMD X2). I can start taking the older/less efficient PSUs and using them for sales systems

Quote:

Originally Posted by ThE_MaD_ShOt

Also you need to be mindful of the other things in the room on the lines. That refridge can easily spike 8 to 10 amps when the compressor starts. Also pulling to many amps can heat the breaker and doing that for a prolong period has the possibility of ending very bad for you or others in the building. Also the wire in the wall to the outlets also has a rating on it and you could be overheating it. Think of it like the Christmas light commercial where the people had a crap ton of light plugged into one outlet with all the splitters. Didn't end very well as the overheated the outlet and it sparked and caught fire. I had 4 rigs on a power strip for a week or 2. When I moved my rigs around I looked at the outlet and you can see where it started getting dark where the power strip was pluged into it and the power strips plug had heat damage. That was just 4 rigs, 3 where x4's and one was an x2 and this was before the gpu units. All crunching and all out fitted with low power gpu's ( hd3650's, onboard hd4200, and a 7300 gt).

All I am saying is be careful. It's great you want to have as many crunchers as you do, they just need to be spread out across more breakers. I don't want to come in here one day and find out something not good happend to you man.

All good suggestions. I'll check with the maintenance staff and make sure that the wires are certified for this. And I have things split out a lot at the wall--the rigs on my side of the wall are using all six plugs across three outlets and the ones on my roommate's side are using two more

I may relocate a system or two to a friend's room--I can offer them use of an i7 in exchange for letting it run there and heat up a different space

ThE_MaD_ShOt · Feb 21, 2013, 08:33 PM

Quote:

Originally Posted by [Ion]

I may relocate a system or two to a friend's room--I can offer them use of an i7 in exchange for letting it run there and heat up a different space

Actually thats a great Idea. If you can find a couple different friends that would do it you can move 4 or 6 rigs.

[Ion] · Feb 21, 2013, 08:50 PM

Quote:

Originally Posted by ThE_MaD_ShOt

Actually thats a great Idea. If you can find a couple different friends that would do it you can move 4 or 6 rigs.

Well, there's no easy way to relocate the caseless systems, but I can still relocate two of the i7/GPU systems--and I can get more cases to box up more.

t_ski · Feb 22, 2013, 02:35 AM

Quote:

Originally Posted by [Ion]

Oh, I'm sure I can replace the fan, but that would involve voiding the warranty--which I'd rather not do, given a choice. So I may just send it back to them and decommission the AMD X2 for a week again

You could time it with spring break since you may have to shut rigs down anyways

[Ion] · Feb 22, 2013, 02:47 AM

Quote:

Originally Posted by t_ski

You could time it with spring break since you may have to shut rigs down anyways

My thought exactly. I'm going to talk to the RA on duty to see if I can leave at least some of the systems going (even just the i7s w/ GPUs would be awesome), but I expect to shut down the 4P and my older systems to keep the heat manageable. Currently I have an 80mm fan forcing air through the PSU and that's working fine, but it's not an elegant solution

Chevalr1c · Feb 22, 2013, 04:47 AM

I would leave the one with the wonky PSU off if you won't be there, and lower the amount of utilised cores of those systems you keep running (you can set that on the WCG site in your profile settings).

okidna · Feb 22, 2013, 01:07 PM

Finally, entering Big 100 @ TPU :

Norton · Feb 22, 2013, 01:12 PM

Quote:

Originally Posted by okidna

Finally, entering Big 100 @ TPU :

http://i.imgur.com/8q15nLG.png

Very Cool!

okidna · Feb 22, 2013, 01:18 PM

Quote:

Originally Posted by Norton

Very Cool!

Thanks Norton

Little by little, point by point, getting closer to millionaire's club

mstenholm · Feb 22, 2013, 01:21 PM

Quote:

Originally Posted by okidna

Finally, entering Big 100 @ TPU :

http://i.imgur.com/8q15nLG.png

That was my first goal too. You just did it in way less time then I did

Top 10 in team? Top 10 in country? There are still some milestones left to persuade

okidna · Feb 22, 2013, 01:32 PM

Quote:

Originally Posted by mstenholm

That was my first goal too. You just did it in way less time then I did

Top 10 in team? Top 10 in country? There are still some milestones left to persuade

Thank you for the kind words

Top 10 in team? That would be really hard, THE REAL milestone

But who knows? Little by little, point by point

Norton · Feb 22, 2013, 01:38 PM

Quote:

Originally Posted by okidna

Thank you for the kind words

Top 10 in team? That would be really hard, THE REAL milestone

But who knows? Little by little, point by point

You will reach your goals if you set yourself to do.... one step at a time

You're already #2 for points today in your country

You're sharing the top 2 spots with one of your TPU Team members.

ThE_MaD_ShOt · Feb 22, 2013, 01:42 PM

Agreed. set small personal goals and it will keep you hungry for more. Right now my next goal is 15 mil.

okidna · Feb 22, 2013, 01:59 PM

Quote:

Originally Posted by Norton

You will reach your goals if you set yourself to do.... one step at a time

You're already #2 for points today in your country

You're sharing the top 2 spots with one of your TPU Team members.

Indeed, good sir. One step at a time

Ah yes, mauriek is usually get the top spot for daily points, he got better GPU I guess.
Just wait until I get back my 8120 and add another 7850

[Ion] · Feb 22, 2013, 10:50 PM

Quote:

Originally Posted by Chevalr1c

I would leave the one with the wonky PSU off if you won't be there, and lower the amount of utilised cores of those systems you keep running (you can set that on the WCG site in your profile settings).

I'm thinking I might bring it home, as it's sub-100w ATm and could hold three GPUs and still be reasonably low power. And I'd certainly turn off all of the dual cores and probably the i7-860 and down-clock the 2700k/920 a bit.

Quote:

Originally Posted by okidna

Finally, entering Big 100 @ TPU :

http://i.imgur.com/8q15nLG.png

You've done well!

Quote:

Originally Posted by okidna

Thank you for the kind words

Top 10 in team? That would be really hard, THE REAL milestone

But who knows? Little by little, point by point

I never thought I'd make it to top-10 in the team, but it's happened

Don't say that you can't accomplish something

I've talked with one of my friends here and the plan is to re-locate the i7-920 to his room--provided it doesn't irritate him, I may also move the i3 there too. I'm going to see if I can find someone who will host the 2700k as well

manofthem · Feb 23, 2013, 04:00 AM

So I'm putting together a PC for my brother, just ordered most of the parts last night and should be here next week. He's getting a 7850 and I'm hoping to get it running WCG for a day or 2 while it's here with me, as I get it all ready for him. Hopefully it'll be a little boost for 24-48 hours

[Ion] · Feb 23, 2013, 04:08 AM

Quote:

Originally Posted by manofthem

So I'm putting together a PC for my brother, just ordered most of the parts last night and should be here next week. He's getting a 7850 and I'm hoping to get it running WCG for a day or 2 while it's here with me, as I get it all ready for him. Hopefully it'll be a little boost for 24-48 hours

Why not leave WCG on and tell it to crunch while the computer isn't in use? You build him a computer, and then it crunches--seems fair to me

manofthem · Feb 23, 2013, 04:09 AM

Quote:

Originally Posted by [Ion]

Why not leave WCG on and tell it to crunch while the computer isn't in use? You build him a computer, and then it crunches--seems fair to me

I did think about that

They never leave the pc on, so it really wouldn't do any good. What I think I'll do is subtly encourage him to leave it running all the time, and then I could squeeze it in, maybe tell him it's better for the pc to run continually than to keep turning it on and off

t_ski · Feb 23, 2013, 04:12 AM

Quote:

Originally Posted by manofthem

So I'm putting together a PC for my brother, just ordered most of the parts last night and should be here next week. He's getting a 7850 and I'm hoping to get it running WCG for a day or 2 while it's here with me, as I get it all ready for him. Hopefully it'll be a little boost for 24-48 hours

Tell him you need it for at least a week to do some "stability testing."

manofthem · Feb 23, 2013, 04:15 AM

Quote:

Originally Posted by t_ski

Tell him you need it for at least a week to do some "stability testing."

Absolutely, I'll be doing some mild overclocking before handing it over, so I'll have to test it to ensure stability. Sounds good to me

Norton · Feb 23, 2013, 04:37 AM

I'll just leave this here

Woot!

Feb 21, 2013, 06:57 PM	#21801
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,751 (6.94/day) Thanks: 2,543 Thanked 2,449 Times in 1,473 Posts System Specs	Yes it's not the watts but the amps that are getting you. Each "side" of your dorm room (yours then your roomates) are probably on a 15 to 20 amp breaker. You may want to check the amps your pulling at the plug on each rig. I usually limit my rigs to 2 rigs per breaker. I like to leave head room so it doesn't heat up the breaker. Oh and 1800 watts is about the max on one line/side/breaker of your dorm room at standard amp draw in a perfect world. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo Last edited by ThE_MaD_ShOt; Feb 21, 2013 at 07:03 PM.

System Name:	Selene / Yoda / Xp Gaming rig
Processor:	Phenom II x6 1090t @ 3.6 / Phenom II x6 1055t @ 3.2 / Athlon 64 X2 4400+
Motherboard:	Gigabyte 990FXA-UD3 /Gigabyte 890XA-UD3 / Asus A8n Sli Premium
Cooling:	CM Hyper 212+ / CM Hyper 212+ / Koolance W/C'd
Memory:	4x 4gb G.Skill Ripjaws / 4x 4gb G.Skill Ares / 2x 1gb & 2x 512mb Crucial Pc3200
Video Card:	2x Visiontek Hd7850's C'fired / Visiontek and Xfx HD6850's C'fired / 2x Evga 8800gtx's Sli'd
Hard Disk:	2x 1tb / 2x 1tb / 250 gb
Optical Drive:	Samsung Sata dvd burner / Sony dvd burner / Sony dvd burner
CRT/LCD Model:	Hp W2207H 22" LCD / Acer 20" Led/ Viewsonic 19" Lcd
Case:	Chieftec Dragon Blue / Chieftec Dragon Blue / Koolance PC3-720BK
Sound Card:	Onboard Hd Audio / Onboard Hd Audio / Creative Sb Audigy 2 ZS Platinum
PSU:	Corsair TX 750 watt / Corsair TX 650 watt / Apevia 700 watt
Software:	Win 7 pro 64 bit / Win Vista Home prem. 64 bit / Win xp Pro Sp3

Feb 21, 2013, 07:34 PM	#21802
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,666 (7.93/day) Thanks: 8,249 Thanked 9,328 Times in 4,261 Posts System Specs	There's no way to do two rigs/breaker--that would limit me to a total of four systems. I've moved the Xeon DP/dual-GPU system and the i3/HD7950 to the roommate's breaker, so that should even things up a bit. __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

System Name:	My Fortress/Trish (WCG #1)/Julia (WCG #2)/Junior (WCG #3)/Norton3 (WCG #4)/My Niece (WCG #5)/TBA
Processor:	FX-8350/PII 1045T/1045T/FX-6200/FX-8150/Xeon (6c/12t)/i7 920
Motherboard:	ASUS M5A99X Evo/ ASUS M4A79XTD Evo/Biostar A880GZ/Biostar A880GZ/ASUS M5A97 EVO/EVGA X58 SLI 3- x2
Cooling:	Xig Night Hawk/ AMD stock hp/Xig Gaia/Xig Night Hawk/Xig Night Hawk/H70/Phantek
Memory:	2x4GB G.Skill Ares DDR31866/2x4GB DDR3 1600/2x2GB DDR31600/2x2GB DDR31600/2x4GB DDR31600/2x3GB/2x3GB
Video Card:	HD 7870/8400GS/IGP/7770/HD 7870/3x HD 7770's
Hard Disk:	2xWD 640(Blue)/WD 80/WD 160/WD 320 (2.5")/WD 160(2.5")/WD VR 150GB/WD 320
Optical Drive:	DVD/RW (if used)
CRT/LCD Model:	Dell 2208WPF, 2409W / Dell 1907FP (shared)
Case:	Silverstone Fortress FT01B/Source 210/Source 210/Fractal Define Mini/Fractal R4/HAF 932/TBA
Sound Card:	on board (All)
PSU:	Corsair HX850/700w (Rosewill)/Antec HCG-620/CX500 v2/TX850/AX1200/TX550M
Software:	Windows 7 HP 64/Win7 Pro 64/ Vista 64bit/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64/Win7 Pro 64
Benchmarks:	Why sit on the Bench when you can get in the game and Crunch!!!

Feb 21, 2013, 08:00 PM	#21804
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,751 (6.94/day) Thanks: 2,543 Thanked 2,449 Times in 1,473 Posts System Specs	Also you need to be mindful of the other things in the room on the lines. That refridge can easily spike 8 to 10 amps when the compressor starts. Also pulling to many amps can heat the breaker and doing that for a prolong period has the possibility of ending very bad for you or others in the building. Also the wire in the wall to the outlets also has a rating on it and you could be overheating it. Think of it like the Christmas light commercial where the people had a crap ton of light plugged into one outlet with all the splitters. Didn't end very well as the overheated the outlet and it sparked and caught fire. I had 4 rigs on a power strip for a week or 2. When I moved my rigs around I looked at the outlet and you can see where it started getting dark where the power strip was pluged into it and the power strips plug had heat damage. That was just 4 rigs, 3 where x4's and one was an x2 and this was before the gpu units. All crunching and all out fitted with low power gpu's ( hd3650's, onboard hd4200, and a 7300 gt). All I am saying is be careful. It's great you want to have as many crunchers as you do, they just need to be spread out across more breakers. I don't want to come in here one day and find out something not good happend to you man. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

System Name:	My i7 Beast
Processor:	Intel Core i7 3930K
Motherboard:	Asus P9X79 Pro
Cooling:	Heatkiller 3.0 Nickel, three FC-7970 CSQ with an FC-link , D5 with EK X-top Rev2 & BIX Quad Radiator
Memory:	4 x 8GB Corsair Dominator GT DDR3-1866
Video Card:	Two Sapphire 7970's + Asus 7970
Hard Disk:	2 x 120GB Corsair Force 3 SSDs in Raid 0 + 500GB WD
Optical Drive:	Lite-On BR Reader
CRT/LCD Model:	Three Asus 24" VW246H LCD's
Case:	Silverstone TJ07
Sound Card:	Onboard
PSU:	Corsair AX1200
Software:	Windows 7 x64 Ultimate

Feb 22, 2013, 04:47 AM	#21810
Chevalr1c Join Date: Sep 2010 Location: Tilburg, Netherlands Posts: 2,058 (2.07/day) Thanks: 4,960 Thanked 785 Times in 531 Posts System Specs	I would leave the one with the wonky PSU off if you won't be there, and lower the amount of utilised cores of those systems you keep running (you can set that on the WCG site in your profile settings). __________________ My FS/FT thread (EU only) \| DynMap of the TPU Minecraft server \| Quick monitor calibration guide \| Boot Failure Troubleshooting Chart \| Solar Team Eindhoven Family Car Project Using BOINC I crunch numbers for World Community Grid, Climateprediction, Free Rainbow Tables and POEM@home; hence assisting research.

System Name:	Intel-desk / Asgard-AMD
Processor:	Intel Core 2 Duo E8400 / AMD Athlon II X2 250
Motherboard:	ASRock P45XE/MSI 785GTM-E45
Cooling:	Asus Triton 75 with 120mm Nexus fan / Scythe Shuriken
Memory:	OCZ Platinum 1066MHz (effective), 4 GB / Crucial Ballistix 1066MHz (effective), 2 GB
Video Card:	Sapphire Radeon HD 6670 DDR3 / Onboard graphics (i.e. Radeon 4200)
Hard Disk:	Kingston SSDNow V300 (120GB) + Seagate Baracuda 7200.12 (500 GB) / two laptop drives of WD in RAID0
Optical Drive:	Asus DRW-2014S1T / (none)
CRT/LCD Model:	Acer AL1714 / Acer AL1916
Case:	Cooler Maste Centurion 5 / Xigmatek Asgard
Sound Card:	integrated chip, i.e. Realtek ALC888 / (same)
PSU:	OCZ ModXstream Pro 600w / OCZ ModXStream Pro 400w
Software:	Windows 7 64-bit; Various (and variating) Linux installs
Benchmarks:	Other: Sharkoon USB 3.0 controller card (2x USB 3.0, PCI-e x1 on my second PCI-e x16 slot), fan cont

Feb 22, 2013, 01:07 PM	#21811
okidna Join Date: Jan 2012 Location: Indonesia Posts: 362 (0.71/day) Thanks: 496 Thanked 271 Times in 151 Posts System Specs	Finally, entering Big 100 @ TPU :

System Name:	Downgrading......
Processor:	AMD FX-4100 @ 4.6 Ghz
Motherboard:	ASRock 970 Extreme3
Cooling:	Xigmatek DK Nighthawk
Memory:	F3-12800CL9D-4GBRL
Video Card:	HIS HD7850 @ 1000/1400
Hard Disk:	80GB WDC + 500 GB WDC GREEN
PSU:	Seasonic SS-650AT 650W
Software:	Windows 7 SP1 x64
Benchmarks:	http://www.techpowerup.com/gpuz/aqppg/ \| http://valid.canardpc.com/2702426

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Feb 22, 2013, 01:42 PM	#21817
ThE_MaD_ShOt Join Date: Nov 2011 Location: Hi! I'm from the Internet Posts: 3,751 (6.94/day) Thanks: 2,543 Thanked 2,449 Times in 1,473 Posts System Specs	Agreed. set small personal goals and it will keep you hungry for more. Right now my next goal is 15 mil. __________________ Crunchers : Phenom II x6 1090t / 2x Phenom II x6 1055t / Phenom II x4 970BE / “I always succed in my mission tho. Beer just delays it!” -ChaoticAtmosphere “TPU is very mild, and I love to tell people I love them when they are being retarded, it makes me feel special in my special places. What was the point of this thread again? Oh well, I love all of you.” -Steevo

Feb 23, 2013, 04:00 AM	#21820
manofthem Join Date: Jan 2011 Location: WPB, FL Posts: 3,338 (3.86/day) Thanks: 2,088 Thanked 2,515 Times in 1,277 Posts System Specs	So I'm putting together a PC for my brother, just ordered most of the parts last night and should be here next week. He's getting a 7850 and I'm hoping to get it running WCG for a day or 2 while it's here with me, as I get it all ready for him. Hopefully it'll be a little boost for 24-48 hours __________________ My Heatware "P.S. Why buy from Newegg...when you can buy from Sneeky!" -LiNKiN

System Name:	Manofthem-PC [] Manofthem-PC2
Processor:	i7 2600k @ 4.5 [] i7 3770k
Motherboard:	Asus P8P67 Pro [] MSI Z68GD55
Cooling:	Water [] Air
Memory:	Samsung 8GB 1866 [] Samsung 8GB 1866
Video Card:	2x 7970's [] 7870 LE
Hard Disk:	2x 830's 256GB / 1.5TB / 2TB [] 500GB
CRT/LCD Model:	Shimian Achieva QH270-Lite [] Acer 27HL
Case:	CM Haf 932 [] Blawkhawk Advanced
Sound Card:	SB X-Fi Titanium [] Onboard
PSU:	Corsair 1000HX [] XFX 550Pro
Software:	Windows 8 Pro x64 [] Windows 7 Ult x64

Feb 23, 2013, 04:37 AM	#21825
Norton WCG Team Assistant Join Date: Dec 2011 Location: Northeast, USA Posts: 5,169 (9.95/day) Thanks: 5,408 Thanked 10,133 Times in 3,189 Posts System Specs	I'll just leave this here Woot! __________________ *Why sit on the Bench* when you can get in the game and Crunch!!!- World Community Grid (FTW) CPU crunchers- FX-8350(4.4)/FX-8150(4.0)/FX-6200(4.0)/ PII 1045T/PII 1045T/i7-920/Xeon (6c/12t)....(44 cores/54 threads) GPU crunchers- no WCG GPU work available Folding@Home- 2x GTX 580's WCG-TPU Team thread- crunch for our Team/see what we do...**

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM