SPDTool: Read, Edit and Flash your Memory's SPD - Page 5

kgp700 · Feb 22, 2007, 09:26 AM

i'm using original 4200ECC SPD file
and edit ram clock 267Mhz to 333Mhz
but verify failad ,too

brite_eye · Mar 11, 2007, 04:03 PM

I was getting incompatible smbus on my MSI 648 (SIS) mob, but running CPU-Z first seems to open the path and allow read and write access to SPD!

Can anyone explain why my motherboard wants to keep using tRAS of 7 even after I bump the SPD value to 8? Only 256MB DDRs with an SPD tRAS of 7 work at 400 MHZ. All the larger sizes have a tRAS of 8 and only work at lower speeds. Any suggestions on how to make the motherboard use the value of 8? Even increasing it to 9 does not work.

W1zzard · Apr 9, 2007, 01:52 AM

updated to 0.60:

nvidia epp support

Frogger · Apr 9, 2007, 02:54 AM

Quote:

Originally Posted by W1zzard

updated to 0.60:

nvidia epp support

Thks... use it at least once a week

mrhelix · Apr 9, 2007, 07:21 AM

Really thanks bro,

Keep it coming

mrhelix · Apr 9, 2007, 11:10 AM

Can I ask a silly question ?

Can we write an EPP profile on a regular stick ?

mrhelix · Apr 10, 2007, 03:01 AM

Oh my Godness!!!

W1zzard · Apr 10, 2007, 12:15 PM

works for you on epp enabled motherboard?

|sWORDs| · Apr 11, 2007, 12:36 AM

Quote:

Originally Posted by mrhelix

Oh my Godness!!!

How the hell did you manage to do that? I've tried with W1zzard almost all night, but it didn't work.

HellasVagabond · Apr 11, 2007, 04:44 AM

"This Driver Has Been Blocked From Loading"

Wizzard this thing aint closer in working in x64 windows is it ?

mrhelix · Apr 11, 2007, 04:54 AM

Quote:

Originally Posted by |sWORDs|

How the hell did you manage to do that? I've tried with W1zzard almost all night, but it didn't work.

I don't know how , I haven't test it yet . I just write on my sticks only.
That I waiting for MOBO shipping a few day

|sWORDs| · Apr 11, 2007, 09:52 AM

Quote:

Originally Posted by mrhelix

I don't know how , I haven't test it yet . I just write on my sticks only.
That I waiting for MOBO shipping a few day

I got it working, but there are a lot of strange things, some settings get selected from SPD (tRC, tRFC), some settings from EPP (CL,tRCD,tRP,tRAS) and some seem selected by bios (CR, tRRD, tWR, tRTW, tWTR).

My board didn't boot because the bios keeps selecting 1T so I loosened the other timings and it works now.

Bios: All AUTO

EPP SPDTOOL:

SPD/EPP Everest:

Chipset timings Everest:

mrhelix · Apr 20, 2007, 12:19 PM

Hey bro , Does it run on Win9X ?

Last night I have a bad flashing , and I got Bluescreen on XP

How to get my SPD back

I think I need a native DOS ver with the basically use
Example ; spdtool -dimm 0 -save my.spd , spdtool -dimm0 -write my.spd

Can it be ?

Zeratul_uy · Apr 29, 2007, 12:07 AM

Quote:

Originally Posted by W1zzard

http://www.techpowerup.com/spdtool/SPDTool_060.zip

Using it you can edit the timings and other settings stored in the SPD of your memory modules.

Changes in 0.4:
Added NVIDIA chipset support
Added Compare function

Changes in 0.52:
Added Upload function to submit SPDs to SPD database
Fixed nForce400 writes
Fixed a few minor bugs
Added a few minor features

Changes in 0.53:
Fixed minor issue with Mfgr Id detection
Fixed URL for Memory Database upload

Changes in 0.55:
Fixed Timing Summary rounding error
Changed minor cosmetic details

Changes in 0.60:
NVIDIA EPP Support added for DDR2

I don't understand how it works hahaha xD i'm really n00b in matters of overclocking

i want to learn plzzz somebody helpmeeee xD

HellasVagabond · Apr 29, 2007, 09:10 AM

Still wont work on x64 windows

FabioMC · May 13, 2007, 05:30 PM

I have two sticks (2x 512) of OCZ PC3200 GOLD VX PC3200 (winbond utt). Then I bought 2x512 of Mushkin PC3200 Blue CL2 but my system detected only 1gb. I searched in the forums and discovered that both sticks have to be the same CAS SPD in the firmware(ocz was 3 and mushkin 2). So I downloaded SPDTOOL and changed mushkin to 3. Finally the system booted with 2gb. But the two modules from mushkin dissapeared from everest and now there´s a module 7 in SPDTOOL. What went wrong ? How can I solve it ?

kgp700 · May 13, 2007, 10:44 PM

Never work in hynix ddr2 rams,,,(4200,5300,6400)

because verify error

please solve it

Ketxxx · May 17, 2007, 07:08 PM

/ket hangs head in sadness. What did I say some pages back now? dont mess with SPD tool unless you know EXACTLY what your doing, otherwise you will probably fudge your SPD data, and that makes ket sad

Zeratul_uy · May 17, 2007, 10:41 PM

Quote:

Originally Posted by Ketxxx

/ket hangs head in sadness. What did I say some pages back now? dont mess with SPD tool unless you know EXACTLY what your doing, otherwise you will probably fudge your SPD data, and that makes ket sad

Ketxxx!! Zera~ wants to become your padawan

can it be? xD

Ketxxx · May 17, 2007, 10:44 PM

Perhaps

over time I've had many a youngling request to become my padawan. Maybe its time I found someone worthy by pitting their brain with some tasks

Zeratul_uy · May 17, 2007, 10:47 PM

Quote:

Originally Posted by Ketxxx

Perhaps

over time I've had many a youngling request to become my padawan. Maybe its time I found someone worthy by pitting their brain with some tasks

Me! Me!!11oneone Pick meeeee!!11oneone
plz? xD

Ketxxx · May 17, 2007, 10:49 PM

I'll start a thread in the general area in a bit

Zeratul_uy · May 17, 2007, 10:56 PM

Quote:

Originally Posted by Ketxxx

I'll start a thread in the general area in a bit

WOWOWOWOWOWWW!!! Yer da best!!!1oneone

Ketxxx · May 17, 2007, 11:35 PM

link

W1zzard · May 24, 2007, 04:42 PM

updated to 0.61

Mar 11, 2007, 04:03 PM	#102
brite_eye Join Date: Mar 2007 Location: Michigan Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Incompatible smbus I was getting incompatible smbus on my MSI 648 (SIS) mob, but running CPU-Z first seems to open the path and allow read and write access to SPD! Can anyone explain why my motherboard wants to keep using tRAS of 7 even after I bump the SPD value to 8? Only 256MB DDRs with an SPD tRAS of 7 work at 400 MHZ. All the larger sizes have a tRAS of 8 and only work at lower speeds. Any suggestions on how to make the motherboard use the value of 8? Even increasing it to 9 does not work. Last edited by brite_eye; Mar 13, 2007 at 01:52 PM.

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

System Name:	MONEY PIT
Processor:	i7-3770K @ 4800 1.20v batch #3231B415
Motherboard:	ASrock Z77 OC Formula w onboard waterblocks
Cooling:	Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory:	G,skill Trident X F3-2400C10D-16GTX
Video Card:	MSI R7970 PE @1150/1700 LIGHTING bios Wcooled
Hard Disk:	2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
CRT/LCD Model:	eyefinity 3 Samsung2343bwx
Case:	NZXT Phantom White w/red
Sound Card:	ReCon3d fatal1ty pro, Logitech z906 THX
PSU:	corsair AX860i
Software:	64bit ++++ win 7

Processor:	Intel Core i7-2600K @ 3.4 GHz
Motherboard:	ASUS P8Z68-V Pro
Memory:	3x 2048 MB Mushkin DDR3
Video Card:	ASUS GeForce GTX 670 Direct CU II TOP
Hard Disk:	Crucial C300 128 GB, WD6400AAKS 640 GB, WD15EADS 1.5 TB
Optical Drive:	BenQ DW1640
CRT/LCD Model:	Dell U3011 30", 2560x1600 + 19" 1280x1024
Case:	NZXT H2
Sound Card:	On-board Realtek HD
PSU:	Kingwin Absolute Platinum 550 W
Software:	Windows 7 64-bit

System Name:	SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor:	i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard:	Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling:	CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory:	12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card:	XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Hard Disk:	1550GB / 6TB SAS - SSD / 160GB SSD
Optical Drive:	PLEXTOR 750A / PLEXTOR DVDRW 820A / NEC 7173S
CRT/LCD Model:	NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case:	COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Sound Card:	Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
PSU:	CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software:	Windows 7 x64 / Windows 7 x64 / Windows 7 x64

Feb 22, 2007, 09:26 AM	#101
kgp700 Join Date: Feb 2007 Posts: 3 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	i'm using original 4200ECC SPD file and edit ram clock 267Mhz to 333Mhz but verify failad ,too

Apr 9, 2007, 01:52 AM	#103
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,861 (4.17/day) Thanks: 184 Thanked 10,441 Times in 3,213 Posts System Specs	updated to 0.60: nvidia epp support

Apr 9, 2007, 07:21 AM	#105
mrhelix Join Date: May 2006 Location: Thailand Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Really thanks bro, Keep it coming

Apr 9, 2007, 11:10 AM	#106
mrhelix Join Date: May 2006 Location: Thailand Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Can I ask a silly question ? Can we write an EPP profile on a regular stick ?

Apr 10, 2007, 03:01 AM	#107
mrhelix Join Date: May 2006 Location: Thailand Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Oh my Godness!!!

Apr 10, 2007, 12:15 PM	#108
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,861 (4.17/day) Thanks: 184 Thanked 10,441 Times in 3,213 Posts System Specs	works for you on epp enabled motherboard?

Apr 11, 2007, 04:44 AM	#110
HellasVagabond Join Date: Jan 2007 Location: Athens , GREECE Posts: 2,695 (1.15/day) Thanks: 14 Thanked 168 Times in 140 Posts System Specs	"This Driver Has Been Blocked From Loading" Wizzard this thing aint closer in working in x64 windows is it ?

Apr 20, 2007, 12:19 PM	#113
mrhelix Join Date: May 2006 Location: Thailand Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Hey bro , Does it run on Win9X ? Last night I have a bad flashing , and I got Bluescreen on XP How to get my SPD back I think I need a native DOS ver with the basically use Example ; spdtool -dimm 0 -save my.spd , spdtool -dimm0 -write my.spd Can it be ? __________________ [img disabled]http://www.vmodtech.com/files/mrhelixsig07_376.jpg[/IMG] fare che cosa tu credere , credere che cosa tu fare faire quoi tu croire , croire quoi tu faire tun was du glauben , glauben was du tun

System Name:	EMMA <3
Processor:	AMD Athlon X2 3600+ Brisbane @ Stock
Motherboard:	GigaByte GA-M57SLI-s4 (I also hate it -.-)
Cooling:	Stock and many Fans :D
Memory:	2GB G.Skill (2 x 1GB DDR-2 800 CL5-5-5-15) @ Stock
Video Card:	ECS 8600GT @ Stock
Hard Disk:	Samsung (120GB IDE)
Optical Drive:	DVDRW LG Dual Layer
CRT/LCD Model:	Compaq V70 (Plz Viewsonic 1903w hurry up!!!)
Case:	Case xD
Sound Card:	Realtek dunnowat 7.1 onboard
PSU:	Eurocase 450w
Software:	Vista Ultimate x32
Benchmarks:	Poor, horrible xD

Apr 29, 2007, 09:10 AM	#115
HellasVagabond Join Date: Jan 2007 Location: Athens , GREECE Posts: 2,695 (1.15/day) Thanks: 14 Thanked 168 Times in 140 Posts System Specs	Still wont work on x64 windows

May 13, 2007, 05:30 PM	#116
FabioMC Join Date: May 2007 Posts: 10 (0.00/day) Thanks: 1 Thanked 0 Times in 0 Posts	Problem after changing firmware I have two sticks (2x 512) of OCZ PC3200 GOLD VX PC3200 (winbond utt). Then I bought 2x512 of Mushkin PC3200 Blue CL2 but my system detected only 1gb. I searched in the forums and discovered that both sticks have to be the same CAS SPD in the firmware(ocz was 3 and mushkin 2). So I downloaded SPDTOOL and changed mushkin to 3. Finally the system booted with 2gb. But the two modules from mushkin dissapeared from everest and now there´s a module 7 in SPDTOOL. What went wrong ? How can I solve it ?

May 13, 2007, 10:44 PM	#117
kgp700 Join Date: Feb 2007 Posts: 3 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Never work in hynix ddr2 rams,,, Never work in hynix ddr2 rams,,,(4200,5300,6400) because verify error please solve it

May 17, 2007, 07:08 PM	#118
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,452 (2.42/day) Thanks: 35 Thanked 589 Times in 421 Posts System Specs	/ket hangs head in sadness. What did I say some pages back now? dont mess with SPD tool unless you know EXACTLY what your doing, otherwise you will probably fudge your SPD data, and that makes ket sad __________________ I'm BACK!

System Name:	Prowler. V9.
Processor:	Intel i5 3570k @ 4.6GHz 1.2v
Motherboard:	Asrock Z77 Extreme6
Cooling:	Modded CoolIT ECO ALC, 3x 120mm Coolermaster Sickleflow fans
Memory:	2x4GB G.Skill Ripjaws @ 2133MHz 10-10-10-25 1N (T)
Video Card:	HD7950 Vapor-X @ 1.25GHz 1.05v, 6GHz 1.5v
Hard Disk:	WD Caviar Black 640GB, 32MB cache, SATA
Optical Drive:	2x Sony Optiarc DVD-RW, SATA
CRT/LCD Model:	22" LG Flatron W2242S
Case:	NZXT Apollo
Sound Card:	Asus Xonar DX 7.1 PCI-E
PSU:	Corsair HX850w modular
Software:	Windows 7 x64

May 17, 2007, 10:44 PM	#120
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,452 (2.42/day) Thanks: 35 Thanked 589 Times in 421 Posts System Specs	Perhaps over time I've had many a youngling request to become my padawan. Maybe its time I found someone worthy by pitting their brain with some tasks __________________ I'm BACK!

May 17, 2007, 10:49 PM	#122
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,452 (2.42/day) Thanks: 35 Thanked 589 Times in 421 Posts System Specs	I'll start a thread in the general area in a bit __________________ I'm BACK!

May 17, 2007, 11:35 PM	#124
Ketxxx Eligible for custom title Join Date: Mar 2006 Location: Kingdom of gods Posts: 6,452 (2.42/day) Thanks: 35 Thanked 589 Times in 421 Posts System Specs	link __________________ I'm BACK!

May 24, 2007, 04:42 PM	#125
W1zzard Benevolent Dictator Join Date: May 2004 Location: Stuttgart, Germany Posts: 13,861 (4.17/day) Thanks: 184 Thanked 10,441 Times in 3,213 Posts System Specs	updated to 0.61

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)