Need some help with timings

driver66 · Jun 9, 2007, 11:50 PM

Okay so I have this

http://www.newegg.com/Product/Produc...AFC-C8Junction

My bios settings look like this all just say auto

CAS latency time=auto
DRAM RAS# to CAS# delay=auto
DRAM RAS# precharge=auto
Precharge delay TRAS=auto
Command rate=auto
Refresh recycle time=auto

I think my bios is setting my timings too tight but im not sure where to put the values of 5*5*5*18 ?

Can a mem guru plz explain the above settings to me? THX u all

driver66 · Jun 9, 2007, 11:52 PM

This may help?

Click image for larger version

Name: 05Jun2007_192529.jpg
Views: 71
Size: 115.4 KB
ID: 8141

DOM · Jun 10, 2007, 12:08 AM

they are at 5-5-5-18

these are the only one I know

CAS latency time=5
DRAM RAS# to CAS# delay=5
DRAM RAS# precharge=5
Precharge delay TRAS=and I think 18
Command rate=and I think 5
Refresh recycle time=and I think 23

check what there settings are like 3-6, 3-45 etc.

driver66 · Jun 10, 2007, 12:23 AM

Thx

What i'm wanting to do is loosen them up alittle bit to go higher on my FSB lol

CPUZ has lied to me before lol

DOM · Jun 10, 2007, 12:41 AM

cuz whats the most you got out of them what are you stuck at

did you see I edited my post

driver66 · Jun 10, 2007, 12:51 AM

check what there settings are like 3-6, 3-45 etc.[/QUOTE]

What does that mean^^^?

vdimm is at 2.1
highest I can get it to go is 410 FSB which doesnt seem right thats only ddr2 820

Specs are in my sig

Kursah · Jun 10, 2007, 12:52 AM

What range does each setting have is what he means.

driver66 · Jun 10, 2007, 12:54 AM

Quote:

Originally Posted by Kursah

What range does each setting have is what he means.

ME SO STUPID LOL

All the specs go from 1-22 except for command rate

Kursah · Jun 10, 2007, 12:58 AM

Do you have your RAM at a 1:1 ratio? At stock speeds you should have your ram strapped to 533 (266x2) speeds since the 6300's bus is 266 (X4 = 1066 FSB). What strap is your memory at? And to get higher, you may need to go the next step up in voltage, but verify what strap speed you're at. I'm not familiar with that board, but my P5B has 4-5 different settings and the first one (also the lowest speed) is 1:1 ratio.

driver66 · Jun 10, 2007, 01:03 AM

Quote:

Originally Posted by Kursah

Do you have your RAM at a 1:1 ratio? At stock speeds you should have your ram strapped to 533 (266x2) speeds since the 6300's bus is 266 (X4 = 1066 FSB). What strap is your memory at? And to get higher, you may need to go the next step up in voltage, but verify what strap speed you're at. I'm not familiar with that board, but my P5B has 4-5 different settings and the first one (also the lowest speed) is 1:1 ratio.

My CPU strap is on 1066
My memory SPD is set on 533

So I believe it's 1:1

Kursah · Jun 10, 2007, 01:06 AM

That sounds right to me. And you still can't get over 410 FSB? I'd research a little more on your setup/components and see what settings/timings/voltages/bios others are using to get higher OC's.

When OC-ing you're also increasing FSBv, NB/MCHv etc? At least enough for a stable oc?

driver66 · Jun 10, 2007, 01:11 AM

Yes very stable have tried uping the voltages

mch 1.4
ihchio??? 1.6
vcore 1.38

NADA no can do

Thx for your help

Kursah · Jun 10, 2007, 05:32 AM

Go into Bios find, copy and list all of your CPU/Memory/OC/Bus Speed related stuff here, Someone's got that board and can tell you what kind of OC you can get from it.

Here's a link to AnandTech's P965 Roundup about your very board, this is the OC section link:
http://www.anandtech.com/mb/showdoc.aspx?i=2860&p=4

Hope that helps.

Jun 9, 2007, 11:50 PM	#1
driver66 Join Date: Jun 2007 Location: indiana Posts: 789 (0.36/day) Thanks: 439 Thanked 113 Times in 109 Posts System Specs	Need some help with timings Okay so I have this http://www.newegg.com/Product/Produc...AFC-C8Junction My bios settings look like this all just say auto CAS latency time=auto DRAM RAS# to CAS# delay=auto DRAM RAS# precharge=auto Precharge delay TRAS=auto Command rate=auto Refresh recycle time=auto I think my bios is setting my timings too tight but im not sure where to put the values of 555*18 ? Can a mem guru plz explain the above settings to me? THX u all __________________ “cheap hooker can be sold cheaper, being a low-end product, you could probably give her a smaller cut? effectively increasing your revenue percentage. now all you need is to increase your absolute number of sales to make more money.” -W1zzard “you had a pedobear called mohammed as avatar .. should i go ahead and post your ip at al-qaeda forums?” -W1zzard

Processor:	c2d e8400@ 3.8ghz 24/7
Motherboard:	Abit IP-35e 80$ lol
Cooling:	zalman cnps9700 led
Memory:	2 x 2 gig patriot viper
Video Card:	evga Gtx 285 oc
Hard Disk:	2 x 300gig sata seagate 7200.10 in raid 0/ 1.5TB for backup
Optical Drive:	samsung writemaster sata dual layer 16x dvd lightscribe
CRT/LCD Model:	acer 24" TFT LCD AL2416WBSD
Case:	Antec 902
Sound Card:	XtremeGamer Fatal1ty Pro series
PSU:	ocz gamextreme 700w
Software:	windows 7 ultimate

Jun 9, 2007, 11:52 PM	#2
driver66 Join Date: Jun 2007 Location: indiana Posts: 789 (0.36/day) Thanks: 439 Thanked 113 Times in 109 Posts System Specs	This may help? __________________ “cheap hooker can be sold cheaper, being a low-end product, you could probably give her a smaller cut? effectively increasing your revenue percentage. now all you need is to increase your absolute number of sales to make more money.” -W1zzard “you had a pedobear called mohammed as avatar .. should i go ahead and post your ip at al-qaeda forums?” -W1zzard

Processor:	c2d e8400@ 3.8ghz 24/7
Motherboard:	Abit IP-35e 80$ lol
Cooling:	zalman cnps9700 led
Memory:	2 x 2 gig patriot viper
Video Card:	evga Gtx 285 oc
Hard Disk:	2 x 300gig sata seagate 7200.10 in raid 0/ 1.5TB for backup
Optical Drive:	samsung writemaster sata dual layer 16x dvd lightscribe
CRT/LCD Model:	acer 24" TFT LCD AL2416WBSD
Case:	Antec 902
Sound Card:	XtremeGamer Fatal1ty Pro series
PSU:	ocz gamextreme 700w
Software:	windows 7 ultimate

Jun 10, 2007, 12:08 AM	#3
DOM Eligible for custom title Join Date: May 2006 Location: TX, USA Posts: 6,464 (2.54/day) Thanks: 292 Thanked 790 Times in 706 Posts System Specs	they are at 5-5-5-18 these are the only one I know CAS latency time=5 DRAM RAS# to CAS# delay=5 DRAM RAS# precharge=5 Precharge delay TRAS=and I think 18 Command rate=and I think 5 Refresh recycle time=and I think 23 check what there settings are like 3-6, 3-45 etc. __________________ Last edited by DOM; Jun 10, 2007 at 12:24 AM.

System Name:	Daily Rig/Bench Rig
Processor:	Intel i7 3770K/Intel i7 3770K
Motherboard:	ASUS Maximus V GENE/Asrock OC Formula
Cooling:	Water/SS-LN2
Memory:	G.SKILL RipjawsX/Team Xtreem LV-2400
Video Card:	EK Full WB HD7970/To Many XD
CRT/LCD Model:	Asus VE248H 24"/LG 22"
Case:	Danger Den Torture Rack/Table XD
Sound Card:	Onboard/None
PSU:	ENERMAX REVOLUTION85+ 1050W /CORSAIR Professional Series Gold AX1200
Software:	W7 64Bit/XP/W7 64Bit

Jun 10, 2007, 12:23 AM	#4
driver66 Join Date: Jun 2007 Location: indiana Posts: 789 (0.36/day) Thanks: 439 Thanked 113 Times in 109 Posts System Specs	Thx What i'm wanting to do is loosen them up alittle bit to go higher on my FSB lol CPUZ has lied to me before lol __________________ “cheap hooker can be sold cheaper, being a low-end product, you could probably give her a smaller cut? effectively increasing your revenue percentage. now all you need is to increase your absolute number of sales to make more money.” -W1zzard “you had a pedobear called mohammed as avatar .. should i go ahead and post your ip at al-qaeda forums?” -W1zzard

Jun 10, 2007, 12:41 AM	#5
DOM Eligible for custom title Join Date: May 2006 Location: TX, USA Posts: 6,464 (2.54/day) Thanks: 292 Thanked 790 Times in 706 Posts System Specs	cuz whats the most you got out of them what are you stuck at did you see I edited my post __________________

Jun 10, 2007, 12:51 AM	#6
driver66 Join Date: Jun 2007 Location: indiana Posts: 789 (0.36/day) Thanks: 439 Thanked 113 Times in 109 Posts System Specs	check what there settings are like 3-6, 3-45 etc.[/QUOTE] What does that mean^^^? vdimm is at 2.1 highest I can get it to go is 410 FSB which doesnt seem right thats only ddr2 820 Specs are in my sig __________________ “cheap hooker can be sold cheaper, being a low-end product, you could probably give her a smaller cut? effectively increasing your revenue percentage. now all you need is to increase your absolute number of sales to make more money.” -W1zzard “you had a pedobear called mohammed as avatar .. should i go ahead and post your ip at al-qaeda forums?” -W1zzard

Jun 10, 2007, 12:52 AM	#7
Kursah Eligible for custom title Join Date: Oct 2006 Location: Missoula, Montana, USA Posts: 6,558 (2.72/day) Thanks: 727 Thanked 1,349 Times in 1,118 Posts System Specs	What range does each setting have is what he means. __________________ Overclocking is Easy! Get Results! - GTX 260/280 Unofficial Support Thread TPU's Gaming Headphone/Headset Thread - Share your experience - My Heat -

System Name:	Kursah's Rig 2011
Processor:	i5-760 2.8Ghz - 4.0Ghz @ 1.29v
Motherboard:	Asus 55i Sabertooth
Cooling:	Xigmatek Balder S1283
Memory:	2x4GB G.Skill Ripjaws DDR3 1600 9.9.9.24 1.5v
Video Card:	XFX HD5870 Rev.2 @ Stock
Hard Disk:	WD Black 1.5Tb, Seagate 1.5Tb LP
Optical Drive:	Asus DRW-24B1ST DVD/CD Burner
CRT/LCD Model:	Samsung 32" LN32D550 LCD TV - 1920x1080
Case:	Lian Li Lancool PC-K62
Sound Card:	Auzen X-Fi Forte 7.1 + FiiO E9 to Denon D2000, JVC HA-DX3 and a Custom Hi-Fi 2.1 setup.
PSU:	Corsair HX750 Modular
Software:	Windows 7 Pro x64 SP1, many games
Benchmarks:	Hi-Fi 2.1 setup: Dayton DTA-100a Class-T Amp to Pioneer SP-BS21-LR Speakers. Dayton Sub-100HT Sub

Jun 10, 2007, 12:58 AM	#9
Kursah Eligible for custom title Join Date: Oct 2006 Location: Missoula, Montana, USA Posts: 6,558 (2.72/day) Thanks: 727 Thanked 1,349 Times in 1,118 Posts System Specs	Do you have your RAM at a 1:1 ratio? At stock speeds you should have your ram strapped to 533 (266x2) speeds since the 6300's bus is 266 (X4 = 1066 FSB). What strap is your memory at? And to get higher, you may need to go the next step up in voltage, but verify what strap speed you're at. I'm not familiar with that board, but my P5B has 4-5 different settings and the first one (also the lowest speed) is 1:1 ratio. __________________ Overclocking is Easy! Get Results! - GTX 260/280 Unofficial Support Thread TPU's Gaming Headphone/Headset Thread - Share your experience - My Heat -

Jun 10, 2007, 01:06 AM	#11
Kursah Eligible for custom title Join Date: Oct 2006 Location: Missoula, Montana, USA Posts: 6,558 (2.72/day) Thanks: 727 Thanked 1,349 Times in 1,118 Posts System Specs	That sounds right to me. And you still can't get over 410 FSB? I'd research a little more on your setup/components and see what settings/timings/voltages/bios others are using to get higher OC's. When OC-ing you're also increasing FSBv, NB/MCHv etc? At least enough for a stable oc? __________________ Overclocking is Easy! Get Results! - GTX 260/280 Unofficial Support Thread TPU's Gaming Headphone/Headset Thread - Share your experience - My Heat -

Jun 10, 2007, 01:11 AM	#12
driver66 Join Date: Jun 2007 Location: indiana Posts: 789 (0.36/day) Thanks: 439 Thanked 113 Times in 109 Posts System Specs	Yes very stable have tried uping the voltages mch 1.4 ihchio??? 1.6 vcore 1.38 NADA no can do Thx for your help __________________ “cheap hooker can be sold cheaper, being a low-end product, you could probably give her a smaller cut? effectively increasing your revenue percentage. now all you need is to increase your absolute number of sales to make more money.” -W1zzard “you had a pedobear called mohammed as avatar .. should i go ahead and post your ip at al-qaeda forums?” -W1zzard

Jun 10, 2007, 05:32 AM	#13
Kursah Eligible for custom title Join Date: Oct 2006 Location: Missoula, Montana, USA Posts: 6,558 (2.72/day) Thanks: 727 Thanked 1,349 Times in 1,118 Posts System Specs	Go into Bios find, copy and list all of your CPU/Memory/OC/Bus Speed related stuff here, Someone's got that board and can tell you what kind of OC you can get from it. Here's a link to AnandTech's P965 Roundup about your very board, this is the OC section link: http://www.anandtech.com/mb/showdoc.aspx?i=2860&p=4 Hope that helps. __________________ Overclocking is Easy! Get Results! - GTX 260/280 Unofficial Support Thread TPU's Gaming Headphone/Headset Thread - Share your experience - My Heat -

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)