GPU-Z v0.0.6 ONLY - BUGS ONLY - Page 2

ziddey · Oct 9, 2007, 05:53 AM

still not resolved for clocks on 7900gs with 2d set to 450/660/20 and 3d at 700/800/60. Maybe that's the problem. My 2d and 3d deltas are different.

Xolair · Oct 9, 2007, 07:12 AM

By the way... is it possible to make GPU-Z show the voltages (core, memory) of a GPU in the future?

ziddey · Oct 9, 2007, 07:41 AM

At least with the 7900, there's only vid+whatever vid definitions in the bios are. So with a voltmod, unless you change the definition in the bios, it won't reflect. And even if you did change it, it could only show the programmed value. And if you're changing your bios to reflect it, then you definitely wouldn't need gpuz to show that. I'm not sure about other cards though, but with nvidia, I'm guessing all up to that point were the same at the very least.

Fuse-Wire · Oct 9, 2007, 09:07 AM

Quote:

Originally Posted by PVTCaboose1337

We need support for S3 and Voodoo!

would be great to see that, c'mon W1zz what can you do??

gareth170 · Oct 9, 2007, 03:21 PM

still the same bug... the gpu-z isn't displaying the gpu clock/memory overclocked and the Pixel Fillrate, Texel Fillrate should increase when overclocking...

cool_recep · Oct 9, 2007, 03:52 PM

Since everybody is telling something I would like to tell my bug too...

A very little bug....

When architecture is unknown...nVidia logo displayed. But the GPU is Intel GMA 915...

BTW an "About" tab would be useful and good.

Kreij · Oct 9, 2007, 08:14 PM

Dell XPS 3.0 GHz P4 / 2 Gig OCZ RAM / ATI X850XT PE / XP Pro SP2

When I run 0.0.6 it immediately locks up the entire computer forcing me to turn off the computer and restart it.

Did not do any version checking on driver revs or anything. Will try to do more testing tomorrow at work.
This is my old PC that I brought to work to upgrade and use for testing stuff ... like non-work related stuff

hemersonmf · Oct 10, 2007, 01:24 AM

Hi, the GPU-Z 0.0.6 dont work at my PC.
When i clicked, the program didnt start. thus, didnt open and nothing happing.

My config is Athlon 64 3700+, Asus a8v-x and XFX 6800Xtreme 256mb / 256bit (agp 8x).

tkx.

Kreij · Oct 10, 2007, 01:35 AM

0.0.6 looks good on my Xfire system.

Validation looks ok, except the GPU and Memory OC sections show a minus sign "-" instead of being blank. The Shader OC is blank.

Not nitpicking, just used to do Software QC on MRI Scanners.

choppy · Oct 10, 2007, 04:08 PM

my bug, with my 6600gt comp bandwidth shows 32.0 gb/s and with my 7600gs (ddr3) it shows 16.0 gb/s so summat is screwed there

also does anybody know are these bandwidths calculated using memory info?

System Name:	The Box
Processor:	DualCore AMD Athlon 64 X2 2300MHz (11.5x200) 4400+
Motherboard:	AsRock N 68-S
Cooling:	Basic 90mm fans
Memory:	OCZ XTC Platinum 2GB DDR-2 800 SDRAM
Video Card:	ATI Saphire x1650 Pro Series
Hard Disk:	Maxtor 6L300R0 (300GB) Maxtors S (250GB)
Optical Drive:	SAMSUNG CD-R/RW SW-240B (40x/12x/40x CD-RW) DVD Burner to be installed
CRT/LCD Model:	19" LCD CTX
Case:	EYE-T
Sound Card:	Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
PSU:	600W colors-IT super quiet
Software:	Microsoft 7 Ultimate

System Name:	No DirectX 11 :(
Processor:	C2D 2.2 Ghz
Motherboard:	Samsung R522-XS04TR
Cooling:	Stock
Memory:	2x2 DDR2 800 MHZ
Video Card:	ATI Mobility Radeon HD 4650
Hard Disk:	WD 500 GB 5000BEVT
Optical Drive:	Slimtyppe
CRT/LCD Model:	Samsung 15.6"
Case:	Samsung Custom
Sound Card:	Realtek 4 Channels HD Audio
PSU:	Adapter
Software:	Windows 7 64 Bit

Oct 9, 2007, 08:14 PM	#32
Kreij Hardcore Monkey Moderator Join Date: Feb 2007 Location: Cheeseland (Wisconsin, USA) Posts: 12,110 (5.28/day) Thanks: 591 Thanked 5,488 Times in 2,932 Posts System Specs	Dell XPS 3.0 GHz P4 / 2 Gig OCZ RAM / ATI X850XT PE / XP Pro SP2 When I run 0.0.6 it immediately locks up the entire computer forcing me to turn off the computer and restart it. Did not do any version checking on driver revs or anything. Will try to do more testing tomorrow at work. This is my old PC that I brought to work to upgrade and use for testing stuff ... like non-work related stuff __________________ Cloud (noun, singular): A dynamic arrangement of multiple potential single points of failure, with a user at one end and their data at the other. Get more tech news on a wide variety of topics at NextPowerUp Last edited by Kreij; Oct 10, 2007 at 01:31 AM.

Processor:	Intel Core 2 Quad QX9650 Extreme @ 3.0 GHz
Motherboard:	Asus Rampage Formula
Cooling:	ZeroTherm Nirvana NV120 Premium
Memory:	8GB (4 x 2GB) Corsair Dominator PC2-8500
Video Card:	2 x Sapphire Radeon HD6970
Hard Disk:	2 x Seagate Barracuda 320GB in RAID 0
Optical Drive:	Sony DRU-120C DVD-RW
CRT/LCD Model:	Dell 3007WFP 30" LCD (2560 x 1600)
Case:	Thermaltake Armor w/ 250mm Side Fan
Sound Card:	SupremeFX 8ch Audio
PSU:	Thermaltake Toughpower 750W Modular
Software:	Win8 Pro x64 / Cat 12.10

Oct 10, 2007, 01:24 AM	#33
hemersonmf Join Date: Oct 2007 Posts: 3 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Dont load. Hi, the GPU-Z 0.0.6 dont work at my PC. When i clicked, the program didnt start. thus, didnt open and nothing happing. My config is Athlon 64 3700+, Asus a8v-x and XFX 6800Xtreme 256mb / 256bit (agp 8x). tkx.

Oct 9, 2007, 05:53 AM	#26
ziddey Join Date: Jan 2007 Posts: 13 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	still not resolved for clocks on 7900gs with 2d set to 450/660/20 and 3d at 700/800/60. Maybe that's the problem. My 2d and 3d deltas are different.

Oct 9, 2007, 07:12 AM	#27
Xolair Join Date: Jun 2007 Location: Finland. Posts: 269 (0.12/day) Thanks: 6 Thanked 3 Times in 3 Posts	By the way... is it possible to make GPU-Z show the voltages (core, memory) of a GPU in the future?

Oct 9, 2007, 07:41 AM	#28
ziddey Join Date: Jan 2007 Posts: 13 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	At least with the 7900, there's only vid+whatever vid definitions in the bios are. So with a voltmod, unless you change the definition in the bios, it won't reflect. And even if you did change it, it could only show the programmed value. And if you're changing your bios to reflect it, then you definitely wouldn't need gpuz to show that. I'm not sure about other cards though, but with nvidia, I'm guessing all up to that point were the same at the very least.

Oct 9, 2007, 03:21 PM	#30
gareth170 Join Date: Oct 2007 Posts: 39 (0.02/day) Thanks: 0 Thanked 1 Time in 1 Post System Specs	still the same bug... the gpu-z isn't displaying the gpu clock/memory overclocked and the Pixel Fillrate, Texel Fillrate should increase when overclocking...

Oct 9, 2007, 03:52 PM	#31
cool_recep Join Date: Oct 2005 Location: Istanbul/Turkey Posts: 353 (0.13/day) Thanks: 43 Thanked 64 Times in 38 Posts System Specs	Since everybody is telling something I would like to tell my bug too... A very little bug.... When architecture is unknown...nVidia logo displayed. But the GPU is Intel GMA 915... BTW an "About" tab would be useful and good.

Oct 10, 2007, 01:35 AM	#34
Kreij Hardcore Monkey Moderator Join Date: Feb 2007 Location: Cheeseland (Wisconsin, USA) Posts: 12,110 (5.28/day) Thanks: 591 Thanked 5,488 Times in 2,932 Posts System Specs	0.0.6 looks good on my Xfire system. Validation looks ok, except the GPU and Memory OC sections show a minus sign "-" instead of being blank. The Shader OC is blank. Not nitpicking, just used to do Software QC on MRI Scanners. __________________ Cloud (noun, singular): A dynamic arrangement of multiple potential single points of failure, with a user at one end and their data at the other. Get more tech news on a wide variety of topics at NextPowerUp

Oct 10, 2007, 04:08 PM	#35
choppy Join Date: Jul 2007 Location: UK Posts: 1,114 (0.52/day) Thanks: 77 Thanked 154 Times in 142 Posts System Specs	my bug, with my 6600gt comp bandwidth shows 32.0 gb/s and with my 7600gs (ddr3) it shows 16.0 gb/s so summat is screwed there also does anybody know are these bandwidths calculated using memory info?

Processor:	Intel Core 2 Duo E7200 3.40GHz (400x8.5)
Motherboard:	Gigabyte GA-EP45-UD3P Rev 1.1
Cooling:	Xigmatek HDT-S1283
Memory:	2x Crucial Ballistix DDR2 2GB 4:5 @ 500MHz 5-5-5-15
Video Card:	Asus GTX 560Ti 1GB TOP Edition
Hard Disk:	Crucial M4 128GB SSD + WD Black 500GB WD5001AALS
Optical Drive:	Samsung SH-S203D/BEBN DVD-RW
CRT/LCD Model:	Samsung P2370HD @ 1920x1080 60Hz
Case:	Antec 300
Sound Card:	Soundblaster Live! 24-bit w/ Creative Inspire T6060 5.1 200W
PSU:	CoolerMaster Silent Pro Gold 600w
Software:	Windows 7 Professional Edition SP1 64-bit

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)