[FS] Swiftech MCW6005-T775 TEC Water Block for Intel LGA 775 - BRAND NEW IN BOX

TheGoat Eater · Apr 23, 2008, 02:52 AM

Delivered yesterday - processor died Friday

so must sell as I will be using money to get a new proc

ASKING $155 shipped via USPS

heat - rleiserowitz01 15-0-0
eBay -rleiseorwitz01 100% positive w/ 203

philbrown23 · Apr 23, 2008, 03:04 AM

wow thats a bummer! does it come with the insulation/dielectric grease/conformal coating needed to actually run the thing?

nflesher87 · Apr 23, 2008, 03:06 AM

Quote:

Originally Posted by philbrown23

wow thats a bummer! does it come with the insulation/dielectric grease/conformal coating needed to actually run the thing?

my question as well

Fitseries3 · Apr 23, 2008, 03:11 AM

LOL!!! i have the same block and it's for sale too! works great. i love it. i just dont use it.

TheGoat Eater · Apr 23, 2008, 03:13 AM

If needed... - you will need to add $27 for this stuff (NO BEER

) and it cost me about $32 and I will ship all for $180 (USPS PRIORITY)

ALL BRAND NEW

the insulation stuff will not be bundled as I need it for starting my DICE runs

If it doesn't sell right away it may tempt me to get an E8500 instead of a naked QX9770 for OCing

Fitseries3 · Apr 23, 2008, 03:18 AM

if this helps any...

DaMulta · Apr 23, 2008, 03:26 AM

fitseries3 what volts are you using?

Fitseries3 · Apr 23, 2008, 03:35 AM

im using a silverstone decathlon 850 watt psu. it's got 65amps on the single 12v rail.

the TEC block is on it's own power cable and the only other thing on the PSU is 3 120mm fans and the laing D5.

DaMulta · Apr 23, 2008, 03:38 AM

So your not getting the full use out of it then. I belive this block takes 15v, and 17v is where is would really start freezeing.

When I tried to run a 180watt tec on a 12v line it would not cut the butter.

You need a meanwell

Quote:

Originally Posted by nflesher87

I'm 90% sure he meant vcore

It's clearly freezing on the table not a cpu...

Fitseries3 · Apr 23, 2008, 03:39 AM

like i said.... i never use it man. i have no use for it. that's why im selling it.

DaMulta · Apr 23, 2008, 03:40 AM

Too bad it's a nice block.

Fitseries3 · Apr 23, 2008, 03:40 AM

i know. i had intended on using it but im too much of a "pussy" lol!!!

rangerone766 · Apr 23, 2008, 03:42 AM

if i didnt need to do all the insulating to use one of those, i'd buy one.

gl with the sale

DaMulta · Apr 23, 2008, 03:43 AM

Don't be scared go get a meanwell, and really watch it freeze.

If you need help getting your board ready I'm here.

Systems running at -30 24/7 isn't that hard to do

.

TheGoat Eater · Apr 24, 2008, 01:54 PM

bump - added a Earthwatts 430 PSU and memory in my new FS thread make an offer on anything...

nflesher87 · Apr 24, 2008, 02:27 PM

Quote:

Originally Posted by TheGoat Eater

bump - added a Earthwatts 430 PSU make an offer on eiither

no you didn't

TheGoat Eater · Apr 24, 2008, 02:29 PM

switched to my new memory thread as the edited title didn't work - will fix...

mrw1986 · Apr 24, 2008, 02:33 PM

Will a D5 + BIXII be enough to cool the TEC on a Q6600 / QX9650?

TheGoat Eater · Apr 24, 2008, 02:37 PM

I would recommend a bigger TEC - as per Damulta - as a 226 would be best for a dual or single core - also a Meanwell would be recommended for the PSU for it - also a Criticool unit ... if I sell my memory I may take this off the block as I see the E8500s in stock... a 65nm quad and even a 45nm quad will be too much loa for a 226watt TEC - though you could mod it with a bigger TEC

mrw1986 · Apr 24, 2008, 02:39 PM

Well, I know about the Meanwell. I'll look into a bigger TEC. My main question is if the D5 + BIXII is enough to cool the hot side of a TEC...I know if you don't take heat away from them fast enough bad things happen.

EDIT: Actually just read some info that might not make me use TEC. The fact that you generally don't want to push higher voltage on the CPU when using TEC.

TheGoat Eater · Apr 24, 2008, 02:43 PM

BIXII = Black Ice Extreme II right?
That is what i was going to use, I would say yes should be enough if just a CPU loop.. or a triple... D5 is also what i was going to use

mrw1986 · Apr 24, 2008, 02:52 PM

Right!

DaMulta · Apr 24, 2008, 02:59 PM

That should be what you need to cool it. Just keep the fans a moven.

I cooled two 180wtt tecs with that rad just fine.

It will work on a quad it just will not be freezing when the voltage starts to get up there. It will be better than just water tho.

Morgoth · Apr 24, 2008, 04:39 PM

where do you live and how mutch watt is that tec? mybe i buy it

philbrown23 · Apr 24, 2008, 06:00 PM

hey Damulta, my tec setup is coming soon, would you be able to help me set up my board for it? I have all the grease and coating etc. but am a little unsure how exactly to do it all.

Apr 23, 2008, 02:52 AM	#1
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	[FS] Swiftech MCW6005-T775 TEC Water Block Delivered yesterday - processor died Friday so must sell as I will be using money to get a new proc ASKING $155 shipped via USPS heat - rleiserowitz01 15-0-0 eBay -rleiseorwitz01 100% positive w/ 203 __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600 Last edited by TheGoat Eater; Apr 24, 2008 at 02:14 PM.

Apr 23, 2008, 03:04 AM	#2
philbrown23 Join Date: Dec 2007 Location: vermont Posts: 1,050 (0.53/day) Thanks: 197 Thanked 150 Times in 133 Posts System Specs	wow thats a bummer! does it come with the insulation/dielectric grease/conformal coating needed to actually run the thing? __________________ CPU-Z validation sig pics temporarily blocked

System Name:	Dominator
Processor:	INTEL C2Q Q6600 FTW!!
Motherboard:	ASUS P5Q-E!!!
Cooling:	TEC cooled cpu, everything else is under water :D
Memory:	4GB CELL SHOCK D9GMH 1066MHZ/4GB CRUCIAL REDS
Video Card:	4850 (VT)/ 4850 IN CROSSFIRE!
Hard Disk:	western digital= 1X 250GB, 1X 500GB, IDE 160GB (BOOT DRIVE ONLY). SEAGATE FREE AGENT 500GB EHDD
Optical Drive:	2X dvdrw w/lightscribe
CRT/LCD Model:	viewsonic 19" hd widescreen
Case:	ROCKETFISH FOR NOW :(
Sound Card:	ONBOARD WORKS JUST FINE FOR ME :p
PSU:	ULTRA X3 1KW MODULAR
Software:	win vista ultimate 64 TWEAKED!!!
Benchmarks:	http://valid.x86-secret.com/show_oc.php?id=434759 3dm06: http://service.futuremark.com/compare?3dm0

System Name:	Chameleon
Processor:	i7 920 D0 B Batch
Motherboard:	eVGA E-757 X58 SLI
Cooling:	Laing D5 Vario + Swiftech MCR320 + D-Tek Fuzion + 3x120mmx38mm Panaflo
Memory:	G.Skill 3x2GB DDR3 1333MHz
Video Card:	HIS HD6870
Hard Disk:	3x 320GB 7200.10 16MB RAID 0
CRT/LCD Model:	2x Dell Ultrasharp 2208WFP TFT @ 3360x1050
Case:	Personally-Modded Rocketfish
PSU:	Corsair HX1000 Modular

System Name:	Craigslist-nickle-and-dime
Processor:	i5 655k
Motherboard:	Gigabyte H55M-UD2H
Cooling:	poop
Memory:	3x2gb OCZ Platinum 1600mhz
Video Card:	Asus 6950 2gb DCII
Hard Disk:	WD 640GB,1TB Black
Optical Drive:	Samsung 22x DL DVD-RW
CRT/LCD Model:	Sammy 55in LED TV
Software:	WIN 7 x64

Apr 23, 2008, 03:11 AM	#4
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.31/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	LOL!!! i have the same block and it's for sale too! works great. i love it. i just dont use it.

Apr 23, 2008, 03:13 AM	#5
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	If needed... - you will need to add $27 for this stuff (NO BEER) and it cost me about $32 and I will ship all for $180 (USPS PRIORITY) ALL BRAND NEW the insulation stuff will not be bundled as I need it for starting my DICE runs If it doesn't sell right away it may tempt me to get an E8500 instead of a naked QX9770 for OCing __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600 Last edited by TheGoat Eater; Apr 23, 2008 at 03:21 AM.

Apr 23, 2008, 03:18 AM	#6
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.31/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	if this helps any... Attached Thumbnails

Apr 23, 2008, 03:26 AM	#7
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.17/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	fitseries3 what volts are you using? __________________ ocLIT The Hardware Punishers

System Name:	Work in progress
Processor:	AMD 955---4Ghz
Motherboard:	MSi GD70
Cooling:	OcZ Phase/water
Memory:	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card:	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Hard Disk:	SSD 64GB
Optical Drive:	DVD-L 16x
CRT/LCD Model:	Envision 24'' 1920x1200
Case:	Using the desk ATM
Sound Card:	Sucky onboard for now :(
PSU:	1000W TruePower Quattro

Apr 23, 2008, 03:35 AM	#8
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.31/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	im using a silverstone decathlon 850 watt psu. it's got 65amps on the single 12v rail. the TEC block is on it's own power cable and the only other thing on the PSU is 3 120mm fans and the laing D5.

Apr 23, 2008, 03:39 AM	#10
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.31/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	like i said.... i never use it man. i have no use for it. that's why im selling it.

Apr 23, 2008, 03:40 AM	#11
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.17/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	Too bad it's a nice block. __________________ ocLIT The Hardware Punishers

Apr 23, 2008, 03:42 AM	#13
rangerone766 Join Date: Aug 2007 Location: cincinnati, ohio Posts: 958 (0.46/day) Thanks: 140 Thanked 105 Times in 88 Posts System Specs	if i didnt need to do all the insulating to use one of those, i'd buy one. gl with the sale __________________ i want to thank Palit_Guy for hooking me up http://www.heatware.com/eval.php?id=59811

System Name:	mine
Processor:	2600k @ 5.0
Motherboard:	msi Z68A-GD65
Cooling:	pa120.3, apogee HD, mcp655 pump
Memory:	16gigs ddr3 1600mhz sammy's @ 1886
Video Card:	evga gtx470 under water
Hard Disk:	3x74 gig raptor raid0, 500gig and 2x 1TB for storage
Optical Drive:	yes(lol)
CRT/LCD Model:	HP 2511x 25inch led
Case:	none ATM
Sound Card:	onboard
PSU:	seasonic x-1250watt
Software:	win 7 pro 64bit

Apr 23, 2008, 03:43 AM	#14
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.17/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	Don't be scared go get a meanwell, and really watch it freeze. If you need help getting your board ready I'm here. Systems running at -30 24/7 isn't that hard to do. __________________ ocLIT The Hardware Punishers

Apr 24, 2008, 01:54 PM	#15
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	bump - added a Earthwatts 430 PSU and memory in my new FS thread make an offer on anything... __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600 Last edited by TheGoat Eater; Apr 24, 2008 at 02:30 PM.

Apr 24, 2008, 02:29 PM	#17
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	switched to my new memory thread as the edited title didn't work - will fix... __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600

Apr 24, 2008, 02:33 PM	#18
mrw1986 Join Date: May 2007 Location: Wallingford, CT Posts: 1,997 (0.91/day) Thanks: 122 Thanked 338 Times in 260 Posts System Specs	Will a D5 + BIXII be enough to cool the TEC on a Q6600 / QX9650? __________________ Visit TechFuzion.net My Heatware

System Name:	Teh Pew Pew
Processor:	Intel i5-2500k 5ghz @ 1.41v
Motherboard:	ASRock P67 Extreme4 Gen3
Cooling:	XSPC RayStorm, BIP III, MCP655 w/ Alphacool Plexi Top, EK-Multioption RES X2 100 Basic
Memory:	2x8gb Patriot Viper 3 DDR3-1600
Video Card:	Asus GTX570 DCII 1280mb
Hard Disk:	1x Plextor PX-256M3 SSD, 2x WD 320gb SATA II (RAID 0), 1x WD 750gb SATA II, 2x Samsung 1TB SATA II
Optical Drive:	LG 20X Super-Multi DVD/CD Burner
CRT/LCD Model:	Dell U2312HM 23" LED Backlit IPS
Case:	Cooler Master HAF 932 Black Edition
Sound Card:	Creative X-Fi Titanium Fatal1ty Professional
PSU:	Corsair HX620W
Software:	Windows 8 Professional x64

Apr 24, 2008, 02:37 PM	#19
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	I would recommend a bigger TEC - as per Damulta - as a 226 would be best for a dual or single core - also a Meanwell would be recommended for the PSU for it - also a Criticool unit ... if I sell my memory I may take this off the block as I see the E8500s in stock... a 65nm quad and even a 45nm quad will be too much loa for a 226watt TEC - though you could mod it with a bigger TEC __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600

Apr 24, 2008, 02:39 PM	#20
mrw1986 Join Date: May 2007 Location: Wallingford, CT Posts: 1,997 (0.91/day) Thanks: 122 Thanked 338 Times in 260 Posts System Specs	Well, I know about the Meanwell. I'll look into a bigger TEC. My main question is if the D5 + BIXII is enough to cool the hot side of a TEC...I know if you don't take heat away from them fast enough bad things happen. EDIT: Actually just read some info that might not make me use TEC. The fact that you generally don't want to push higher voltage on the CPU when using TEC. __________________ Visit TechFuzion.net My Heatware

Apr 24, 2008, 02:43 PM	#21
TheGoat Eater Join Date: Apr 2008 Location: West Des Moines,IA (USA) Posts: 606 (0.32/day) Thanks: 31 Thanked 108 Times in 87 Posts	BIXII = Black Ice Extreme II right? That is what i was going to use, I would say yes should be enough if just a CPU loop.. or a triple... D5 is also what i was going to use __________________ [Mobile Artillery] MSI GT60 0NE-403USi7-3630QM \| matte 15.6" 1080P \|GTX 680M 4GB w/ custom bios \|750GB 7.2K rpm \| Killer Doubleshot networking \|12GB DDR3 1600

Apr 24, 2008, 02:52 PM	#22
mrw1986 Join Date: May 2007 Location: Wallingford, CT Posts: 1,997 (0.91/day) Thanks: 122 Thanked 338 Times in 260 Posts System Specs	Right! __________________ Visit TechFuzion.net My Heatware

Apr 24, 2008, 02:59 PM	#23
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.17/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	That should be what you need to cool it. Just keep the fans a moven. I cooled two 180wtt tecs with that rad just fine. It will work on a quad it just will not be freezing when the voltage starts to get up there. It will be better than just water tho. __________________ ocLIT The Hardware Punishers

Apr 24, 2008, 04:39 PM	#24
Morgoth Join Date: Aug 2007 Location: Netherlands Posts: 2,650 (1.25/day) Thanks: 80 Thanked 217 Times in 160 Posts System Specs	where do you live and how mutch watt is that tec? mybe i buy it __________________ http://www.moddb.com/mods/biohazard-project http://biohazardproject.net76.net/

System Name:	Skynet
Processor:	Intel Xeon E5520 Intel Xeon E5520 @ stock
Motherboard:	Evga W555 sr-2
Cooling:	2xCPu on water (3 rads 120x120) Swiftech 655 pump, gpu, ram on air
Memory:	24gb ram 1066mhz
Video Card:	amd/ati HD5970
Hard Disk:	2x Seagate Barracuda 7200.11 500GB 32MB Cache SATA2 3gb ramdisk
Optical Drive:	none
CRT/LCD Model:	Samsung 206bw 20inch 16:10
Case:	techbench custom
Sound Card:	Onboard
PSU:	Corsair Powersupply CMPSU-1000HXEU 1000W, Modular
Software:	Windows 7 ultimate 64bit
Benchmarks:	3dmark 2011 P6976 Wprime 32m 6,203 VBCT 10mb final compile 00:02:13

Apr 24, 2008, 06:00 PM	#25
philbrown23 Join Date: Dec 2007 Location: vermont Posts: 1,050 (0.53/day) Thanks: 197 Thanked 150 Times in 133 Posts System Specs	hey Damulta, my tec setup is coming soon, would you be able to help me set up my board for it? I have all the grease and coating etc. but am a little unsure how exactly to do it all. __________________ CPU-Z validation sig pics temporarily blocked

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CoolIT Freezone	djbbenn	Reviews	12	Dec 24, 2008 02:47 PM
Danger Den Maze 5	D_o_S	Reviews	5	Jan 27, 2007 10:23 PM
Thermaltake Bigwater 745	Urlyin	Reviews	37	Dec 1, 2006 01:02 AM
Thermaltake Tai-Chi	Urlyin	Reviews	8	Jun 24, 2006 02:51 AM