Naturally Aspired PC WaterCooling Club

[SirKeldon]

Yeah, i'll try to do that, it's suposed to be under warranty so i should get a replacement, i'll see what i can do. Thank you for the support.

Btw, thanks for the link of the review, really impressive the new Feser radiators, almost as good as TC. Interesting =)

[intel igent]

another enzo bites the dust

glad to hear your hardware didn't get damaged SirKeldon

did you get it sorted out or are you still waiting?

[Cold Storm]

All right, got a question.... Waterblock for a 9800gx2???

[Wile E]

DangerDen has one.

http://www.dangerden.com/store/produ...&cat=48&page=1

[DOM]

Originally Posted by Cold Storm

All right, got a question.... Waterblock for a 9800gx2???

http://www.evga.com/articles/406.asp

[Wile E]

Originally Posted by DOM

http://www.evga.com/articles/406.asp

From what I have heard, the EVGA block is made by DangerDen.

[SirKeldon]

Originally Posted by intel igent

another enzo bites the dust

glad to hear your hardware didn't get damaged SirKeldon

did you get it sorted out or are you still waiting?

intel_igent, i'm still waiting for my new D-Tek Fuzion (DanishDevil sold it to me cause he's getting the v2, thanks zack!) ... should be here tomorrow or thursday, at least, the teflon tape it's doing a good job, i just lost about 2-3mm of liquid (microres) in almost five days on 24/7. And still all hardware is 100% functional though i'm running it with some paper towels.

When the Fuzion arrives, i'll took apart the Enzotech and i'll go to the store, these last days they seem so lazy even for picking up the phone, i call but nobody answers ... grrrrr ... and i don't know what i'll do cause for getting my money back time is over ... and i won't risk again with this specific model of Enzotech ... and neither i'd sell it, i don't want to fuck another circuits neither ... so i don't know if i'll ask for a new Enzo cause really i don't want it.

Any suggestions? Maybe as a decorative object?

Thanks for the support!

[Cold Storm]

Thanks Wile E. and Dom.. Now I just have to see if I want to keep this Max board, or go back to the Striker II board... I know I'm keeping the 9800gx2!

[DOM]

Originally Posted by Wile E

From what I have heard, the EVGA block is made by DangerDen.

http://www.sidewindercomputers.com/ekfucoekgx2s.html

they dont look to much the same but 200-250 kind of hurts

[Cold Storm]

Originally Posted by DOM

http://www.sidewindercomputers.com/ekfucoekgx2s.html

they dont look to much the same but 200-250 kind of hurts

Oh yeah it does! but, I guess its because I spent $650 on the card it self! The 3870x2's where around $150, I believe.... So I can see it being that much... Grr the price for water these days!

[Wile E]

Originally Posted by DOM

http://www.sidewindercomputers.com/ekfucoekgx2s.html

they dont look to much the same but 200-250 kind of hurts

I have no way of confirming. it's just something I saw mentioned on OCN. Don't actually know if it's anywhere near true or not.

And nice find, I forgot about EK for a minute. That's the one I would go for, personally.

[Cold Storm]

I can see the pricing being that much... But, I am for the EK...I just have to start buying it piece by piece...

[intel igent]

@ SirKeldon : they should at LEAST give you a replacement block which you can then sell to re-coup your money

IIRC EK, DangerDen, EvGA, Aquacomputer?? and Koolance have blox for the GX2's

[DOM]

Im thinking of geting a Swiftech MCR320-QP and Swiftech MCR220-QP and a 2nd Swiftech MCP655 12v DC Pump

for my loop im not happy with my cpu temps

so would it be better to have two loops or just run them in one loop

CPU, GPU, NB, SB are the things im cooling

so should I just use the MCR320 for the CPU and MCR220 to cool the GPU, NB & SB ?

I would get ThermoChill but its $160 more over the Swiftech

Cuz right now im running one loop with a PrimoChill Radiator Xtreme Series 360

SO will it be an upgrade ?

[intel igent]

i'd go two loops

CPU on the 220, GPU/NB/SB on the 320

[DOM]

why the 220 on the CPU ?

GPU only tops 45c on fur and CPU on prime on small fft

Im looking at lowering the CPU load temps also for beching

thats why I wanted to use the 320 for the CPU cuz im thinking of taking out the SB off of water I just run it lowest volts setting lol

but the NB is at 1.9v for benching and should be getting a new card to play with going to volt mod it but still waitting

So it might just be CPU NB GPU to Cool and Im trying to get more out of the CPU cuz 480FSB is the most I can get out of it idk if its cuz of temps or what cuz NB was 1.65v but after volt mod most is 1.9v and only got 40 more MHZ

[intel igent]

difference between 220/320 for CPU only would be minimal, both temp + OC

220 will handle CPU easily

320 for the "hot" parts

[DOM]

the cpu is the hot one :P the CPU Temp gets to 51c at 75F room temp at 70F CPU at 48-50

while the GPU droped 5C on load so do you think I should use the 320 on the GPU still

[intel igent]

GPU/NB/SB will give off more heat than CPU only IIRC

[DOM]

well for the NB temp idk whats it at but then SB might just go back to air cuz even uping the volts It doesnt help the OC

plus im thinking about it might just geting the 220 and keep the PrimoChill Radiator Xtreme Series 360

[Cold Storm]

Throw up the PC Probe on the Asus board and you'll be all set on where your temps are right!

[DOM]

Originally Posted by Cold Storm

Throw up the PC Probe on the Asus board and you'll be all set on where your temps are right!

it only reads the CPU temp and mobo temp what ever that is

and it doesnt work any more mobo is unknow idk what happened but it still works lol

[Cold Storm]

Do you have the latest drivers for the board? Have device manager find it and fix it for ya.. PC Probe, even if its not II, should still have the NB readings... I know RM's does and he's working on a 965 chipset

[DOM]

Asus P5W DH Deluxe is 975

[Cold Storm]

oops.. my mistake..So, your is older... but here is the most recent update for you... I hope its the right motherboard... to many P5b's! lol