Naturally Aspired PC WaterCooling Club - Page 20

MKmods · Jul 9, 2008, 11:00 PM

Quote:

Originally Posted by sneekypeet

I was leaning in the direction of laying one on its side and one standing as usual. That will leave 2 barbs up top and two on the side, so the actual "heads" dont clash! Should be able to continue using straight fittings!

do you mean in a cross pattern?

cdawall · Jul 9, 2008, 11:01 PM

Quote:

Originally Posted by sneekypeet

I was leaning in the direction of laying one on its side and one standing as usual. That will leave 2 barbs up top and two on the side, so the actual "heads" dont clash! Should be able to continue using straight fittings!

mine have a fitting at the top and bottom so i could run it with elbows just fine

Quote:

Originally Posted by MKmods

do you mean in a cross pattern?

not happening case isn't big enough

sneekypeet · Jul 9, 2008, 11:06 PM

Something like this if you were to look top down at the sandwich....

cdawall · Jul 9, 2008, 11:09 PM

mine arent set up like that though

http://www.dangerden.com/store/produ...?productid=199

sneekypeet · Jul 9, 2008, 11:12 PM

Oh well you are screwed without 90* fittings then. You will see when you try to connect the hoses straight on with a fan and a header from another rad they you wont have the room to attach it!

Even with this rad....http://www.jab-tech.com/xcart/produc...led/d_2527.jpg

Unless one rad is 90* from the other you have to use 90*'s...not the best plan IMHO!

Edit: The link you posted it to a 2X120 rad...you are laying 2 of those in your case?

cdawall · Jul 9, 2008, 11:16 PM

Quote:

Originally Posted by sneekypeet

Oh well you are screwed without 90* fittings then. You will see when you try to connect the hoses straight on with a fan and a header from another rad they you wont have the room to attach it!

Even with this rad....http://www.jab-tech.com/xcart/produc...led/d_2527.jpg

Unless one rad is 90* from the other you have to use 90*'s...not the best plan IMHO!

Edit: The link you posted it to a 2X120 rad...you are laying 2 of those in your case?

yep here is my DD cart right now

cdawall · Jul 9, 2008, 11:19 PM

wait no im doing this tubing

http://www.jab-tech.com/Tygon-R-3400...2-pr-3958.html

sneekypeet · Jul 9, 2008, 11:25 PM

^^^ does that seem more relevant now?

cdawall · Jul 9, 2008, 11:27 PM

Quote:

Originally Posted by sneekypeet

^^^ does that seem more relevant now?

it should work fine like i have it with 90 degree fittings

sneekypeet · Jul 9, 2008, 11:29 PM

Quote:

Originally Posted by cdawall

it should work fine like i have it with 90 degree fittings

Im just saying the way I have it flow would have to be better. It is you party tho....play it how you want to!

cdawall · Jul 9, 2008, 11:30 PM

Quote:

Originally Posted by sneekypeet

Im just saying the way I have it flow would have to be better. It is you party tho....play it how you want to!

lol maybe ill try this and if all else fails ill try something else i mean shit idc whats in the loop its a MCP655

i tihnk she can pump enough to keep my safe

MKmods · Jul 9, 2008, 11:34 PM

I think if you rotate the rads 180 deg you will be fine without the 90s.
(and the masterclear is not very flexible)

cdawall · Jul 9, 2008, 11:36 PM

Quote:

Originally Posted by MKmods

I think if you rotate the rads 180 deg you will be fine without the 90s.
(and the masterclear is not very flexible)

that would work so i only needed 2 90s and those would be on the front rad short of punching the tubing out the front i cant get around it

swapped for some tygon R-3400

sneekypeet · Jul 9, 2008, 11:36 PM

Quote:

Originally Posted by MKmods

I think if you rotate the rads 180 deg you will be fine without the 90s.
(and the masterclear is not very flexible)

If you rotate the rad 180* it will be in the exact position you started...the rad is a mirror image of itself on a 45* cut through it.

EDIT: or do you mean in a back to back sort of arrangement?

cdawall · Jul 9, 2008, 11:47 PM

Quote:

Originally Posted by sneekypeet

If you rotate the rad 180* it will be in the exact position you started...the rad is a mirror image of itself on a 45* cut through it.

im thinking take my original image and face the front rad so the fittings faced the other rad. on the front rad put a 90 degree fitting to the side of the case and run the inside most rads top fitting to it and on the bottom fitting a 90 again but point it out to the side and run it towards the mobo tray and run it up to my cpu block

Quote:

Originally Posted by sneekypeet

EDIT: or do you mean in a back to back sort of arrangement?

i think thats what he meant but it wont fit in the front of my case

SirKeldon · Jul 9, 2008, 11:48 PM

Get the Tygon R-3603 ... is a pleasure to bend it and see that no crushes appear

sneekypeet · Jul 9, 2008, 11:52 PM

Quote:

Originally Posted by SirKeldon

Get the Tygon R-3603 ... is a pleasure to bend it and see that no crushes appear

IDK i payed through my teeth ($3.50 a foot) for Tygon...6 months later its cloudy. Also I agree it wont kink, but I have tried to make a couple of turns ion SLI that it flattened right out on.

Not all that impressed for the money to be honest...Going with red tubing next, something new!

cdawall · Jul 9, 2008, 11:54 PM

i was looking at the R-3400 mainly because its black

how much comes for that $1 or whatever?

sneekypeet · Jul 9, 2008, 11:59 PM

Quote:

Originally Posted by cdawall

i was looking at the R-3400 mainly because its black

how much comes for that $1 or whatever?

its priced by the foot cd!

cdawall · Jul 10, 2008, 12:01 AM

Quote:

Originally Posted by sneekypeet

its priced by the foot cd!

good cause i wasn't paying attention and didnt want to go oh shit when it showed up

SirKeldon · Jul 10, 2008, 12:08 AM

Quote:

Originally Posted by sneekypeet

IDK i payed through my teeth ($3.50 a foot) for Tygon...6 months later its cloudy. Also I agree it wont kink, but I have tried to make a couple of turns ion SLI that it flattened right out on.

Not all that impressed for the money to be honest...Going with red tubing next, something new!

Sad to hear that, i have two hard bends together on the last rad->res plug and no one kinked never, i can only say good things about Tygon though i never tested a SLI/X-Fire plug, i'll tell you

sneekypeet · Jul 10, 2008, 12:08 AM

Quote:

Originally Posted by cdawall

good cause i wasn't paying attention and didnt want to go oh shit when it showed up

Well on further examination , your "Quantity: 2" will leave that oh shit in place upon arrival. I say around 10ft is usually good. get 15 if you think you may change things up a bit after the initial setup!

@ SirKeldon...if not for the clouding , for my CPU it works great. I love that it stays soft, I have used a lot of tubing before for fishtanks/pumps. It always got rockhard in 6 months. It may have had something to do with the PC ICE coolant I was using as well. Who knows?

MKmods · Jul 10, 2008, 12:30 AM

Quote:

Originally Posted by sneekypeet

If you rotate the rad 180* it will be in the exact position you started...the rad is a mirror image of itself on a 45* cut through it.
EDIT: or do you mean in a back to back sort of arrangement?

Oh yee of little faith
(sorry for the sucky pict)

The end with the nozzles sticks out further than the end without

I have used primochill hose and its cool
http://www.frozencpu.com/products/76...?tl=g30c99s171
http://www.primochill.com/index.php?...ategory_id=257
now in nice colors too

tigger · Jul 10, 2008, 01:19 AM

Is this radiator any good?

http://www.scan.co.uk/Product.aspx?WebProductId=798997

It is pretty cheap.

sneekypeet · Jul 10, 2008, 01:50 AM

Quote:

Originally Posted by MKmods

Oh yee of little faith
(sorry for the sucky pict)

The end with the nozzles sticks out further than the end without

I have used primochill hose and its cool
http://www.frozencpu.com/products/76...?tl=g30c99s171
http://www.primochill.com/index.php?...ategory_id=257
now in nice colors too

That was my first assumption, but you missed the part where he links to his type of rads. They have a barb in opposite corners, no like ours!

Also on the links to the tubing...I am looking to nab the red varient on my next major buy(offsets shipping a bit)!

System Name:	Crossflow III
Processor:	AMD 965 (4.04Ghz)
Motherboard:	Asus Crosshair III
Cooling:	Air
Memory:	4 gigs Mushkin 7-7-7-20@1T
Video Card:	single 9800GT
Hard Disk:	Raptor 150's in Raid0
Optical Drive:	Plextor
CRT/LCD Model:	LG Flatron 24"
Case:	Custom
Sound Card:	AuzenTech X-Raider W/OP637
PSU:	Custom modded Corsair 750HX
Software:	Win 7 64/Solaris Utility
Benchmarks:	3DMark06--21963 so far

System Name:	Deployment build
Processor:	Phenom II B97@4080mhz 1.6v (24/7 4800mhz max clock)
Motherboard:	Asus Crosshair V Formula
Cooling:	Coolermaster V10 96w TEC, Scientific Rulian fans
Memory:	4x4GB Wintec ONE 1800 9-10-9 1.62v (24/7)
Video Card:	Sapphire 7950 3GB 1150/1400 1.27v
Hard Disk:	2x32GB STT SSD's raid 0, 1TB Samsung F3's, 1.5TB Seagate 7200.11
CRT/LCD Model:	STi 22"
Case:	Thermaltake Commandar MS-I Epic Edition
Sound Card:	E07K USB DAC->Fischer FA-002W High edition
PSU:	Antec TPQ-1200
Software:	windows 7 ultimate x64

Jul 9, 2008, 11:06 PM	#478
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,987 (7.31/day) Thanks: 3,035 Thanked 5,482 Times in 3,948 Posts System Specs	Something like this if you were to look top down at the sandwich.... __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

Jul 9, 2008, 11:09 PM	#479
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.43/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	mine arent set up like that though http://www.dangerden.com/store/produ...?productid=199 __________________

Jul 9, 2008, 11:12 PM	#480
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,987 (7.31/day) Thanks: 3,035 Thanked 5,482 Times in 3,948 Posts System Specs	Oh well you are screwed without 90* fittings then. You will see when you try to connect the hoses straight on with a fan and a header from another rad they you wont have the room to attach it! Even with this rad....http://www.jab-tech.com/xcart/produc...led/d_2527.jpg Unless one rad is 90* from the other you have to use 90*'s...not the best plan IMHO! Edit: The link you posted it to a 2X120 rad...you are laying 2 of those in your case? __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Jul 9, 2008, 11:19 PM	#482
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.43/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	wait no im doing this tubing http://www.jab-tech.com/Tygon-R-3400...2-pr-3958.html __________________

Jul 9, 2008, 11:25 PM	#483
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 18,987 (7.31/day) Thanks: 3,035 Thanked 5,482 Times in 3,948 Posts System Specs	^^^ does that seem more relevant now? __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Jul 9, 2008, 11:34 PM	#487
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.47/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	I think if you rotate the rads 180 deg you will be fine without the 90s. (and the masterclear is not very flexible) __________________ Buy tin snips FIRST!

Jul 9, 2008, 11:48 PM	#491
SirKeldon Join Date: Feb 2008 Location: Barcelona, Catalonia (Spain) Posts: 426 (0.22/day) Thanks: 167 Thanked 155 Times in 92 Posts System Specs	Get the Tygon R-3603 ... is a pleasure to bend it and see that no crushes appear __________________ "I have no special talents, i'm just passionately curious" - Albert Einstein

System Name:	macJuiced Pro (LiquidMac i5)
Processor:	Intel Core i5 2500K @ 4.11 GHz (1,260V idle - 1,248V load)
Motherboard:	Gigabyte GA-Z68XP-UD4 (F6 BIOS)
Cooling:	Phobya DC12-400 + Swiftech Apogee XT rev2 + MCW82 GPU + MCR-220XP (push->pull) + Micro Res v2
Memory:	16GB (4x4GB) Kingston HyperX DDR3 @ 1600Mhz (9-9-9-24 @ 1.65V)
Video Card:	Asus Radeon EAH6850 1GB DDR5 DirectCU (OC'd from factory @ 790MHz/1000MHz)
Hard Disk:	WD Caviar Black (1x1TB SATA3) + Seagate Barracuda (1x1TB SATA II + 1x2TB eSATA III)
Optical Drive:	Hitachi LG DVDRAM GH20NS10
CRT/LCD Model:	LG IPS231 1920x1080 @ 60Hz
Case:	PowerMac G5 Modded (Late 2005 version)
Sound Card:	Realtek ALC889 w/ Tritton PC510HDa // Native Instruments Audio Kontrol 1 w/ Logitech Speakers
PSU:	Thermaltake Toughpower XT 775W
Software:	MacOS X 10.7.5 "Lion" // Windows 7 Ultimate

Jul 9, 2008, 11:54 PM	#493
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.43/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	i was looking at the R-3400 mainly because its black how much comes for that $1 or whatever? __________________

Jul 10, 2008, 01:19 AM	#499
tigger I'm the only one Join Date: Mar 2006 Location: HU5 1LL Posts: 7,194 (2.75/day) Thanks: 469 Thanked 942 Times in 775 Posts System Specs	Is this radiator any good? http://www.scan.co.uk/Product.aspx?WebProductId=798997 It is pretty cheap. __________________ http://img.techpowerup.org/110324/v6351cpuzvalj197.jpg ]Monster E6300 oc http://www.techpowerup.com/gallery/2163.html

System Name:	poor little craptop (HP Pavillion G6)
Processor:	AMD E2-3000M 1.8ghz
Motherboard:	3566 21.3A
Cooling:	stock
Memory:	ADATA 4gb 1333mhz SODIMM
Video Card:	ATI Radeon HD 6380G 512MB
Hard Disk:	Seagate ST950032 5AS 500GB sata
Optical Drive:	HP 208BB DVD R/CDRW sata
CRT/LCD Model:	15.6" 1366x768 widescreen+17" 1440x900 widescreen
Case:	hp laptop
Sound Card:	onboard
Software:	windows 7 home premium x64 genuine (for once)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Club X1950 xt 512 ram	cookiemonster	Graphics Cards	0	Apr 2, 2007 01:41 PM
Does Watercooling Suck?	Acer	Overclocking & Cooling	8	Mar 24, 2007 04:43 AM
Corsair Nautilus500 External Watercooling Kit	W1zzard	News	0	Feb 22, 2006 07:25 PM