Naturally Aspired PC WaterCooling Club - Page 22

cdawall · Jul 12, 2008, 04:05 PM

Quote:

Originally Posted by sneekypeet

That 1300 only pumps about 60GPH more with 4 feet less head , and uses more power(heat added to loop). Also even when my 110V pump was quiet running the PC ICE coolant, the vibration on my desk was still there, so take that into account also!

Just some food for thought!

woops good point hehe 2300 or 2600 look good?

calvary1980 · Jul 12, 2008, 04:16 PM

didn't you just read my post you banana head

- Christine

sneekypeet · Jul 12, 2008, 04:19 PM

Quote:

Originally Posted by calvary1980

didn't you just read my post you banana head

- Christine

Thanks for the laugh Christine!

@ cd I think she means you would need the 3600 or better. But thats over 1000GPH...lol

DaMulta · Jul 13, 2008, 07:29 AM

I have a 120GTX with it's own pump ready to be installed.
Been waiting on a res, and a few other things. But I think I'm going to rig it out anyway

DD-CPX1 12V Pump--Small pump
DD12V-D5 Pump Fixed Speed by Laing
Danger Den Single 5 1/4" Bay Reservoir
DangerDen - 9800GTX blocks

DaMulta · Jul 13, 2008, 03:40 PM

Well I'm going to start on my runs in a few hours.

SirKeldon · Jul 13, 2008, 03:42 PM

Quote:

Originally Posted by DaMulta

I have a 120GTX with it's own pump ready to be installed.
Been waiting on a res, and a few other things. But I think I'm going to rig it out anyway

DD-CPX1 12V Pump--Small pump
DD12V-D5 Pump Fixed Speed by Laing
Danger Den Single 5 1/4" Bay Reservoir
DangerDen - 9800GTX blocks

Bad boy's style! even on sketch

It's a lil bit hard to undertand for me though, i'm the only one?

Anyway ... post pics when you're done man & good luck!

DaMulta · Jul 13, 2008, 03:48 PM

Res 1/2 into a T, then into one pump that is 1/2 and the other 3/8.

The video cards from the 1/2 will go to 3/8 and back to 1/2 for the rad and then into a T back to the res.

The chipset is from the 3/8s pump, and into the 3/8s rad, and back into the T to the res.

SirKeldon · Jul 13, 2008, 03:54 PM

In what loop will you be cooling your CPU, chipset or graph one?

DaMulta · Jul 13, 2008, 04:08 PM

No cpu in my loop at all

Video cards/Chipset, one loop, with 2 pumps.

SirKeldon · Jul 13, 2008, 04:21 PM

Oh ok, i understand better now

DaMulta · Jul 13, 2008, 04:23 PM

It's all listed in my paint work lol

cdawall · Jul 13, 2008, 05:24 PM

my tygon showed up today just waiting on the maze4 from POS

DaMulta · Jul 13, 2008, 05:50 PM

On a Sunday?

Loving my temps on my cpu

cdawall · Jul 13, 2008, 05:52 PM

it showed up yesterday i just went to the mailbox today

Cold Storm · Jul 14, 2008, 05:52 AM

You gotta love water! Just got done setting up my loop. Damn Jab-tech sent me a faulty 3/8th barb.. good thing I bought two extra for whatever... The treading on it was only done once, instead of 3 times around... I almost thought that My block was bad in threading!

loving the temps also. At load at stock, I get what I got with the Xig and Delta's on it! lol

DaMulta · Jul 14, 2008, 05:55 AM

Quote:

Originally Posted by Cold Storm

You gotta love water! Just got done setting up my loop. Damn Jab-tech sent me a faulty 3/8th barb.. good thing I bought two extra for whatever... The treading on it was only done once, instead of 3 times around... I almost thought that My block was bad in threading!

loving the temps also. At load at stock, I get what I got with the Xig and Delta's on it! lol

video?

cpu?

sneekypeet · Jul 14, 2008, 05:56 AM

Welcome to watercooling!!!!! May your pump always continue to flow, and may all your OC's be chilly.

@ DM its just a CPU loop for now!

Cold Storm · Jul 14, 2008, 05:59 AM

Quote:

Originally Posted by DaMulta

video?

cpu?

I went with just one loop. A Swifty 655 with controller, 360 rad, with 3 80cfm blue fans, a Swifty micro res, and some, should be blue, tubing. I"ll have pictures once I get home from my trip. I was the Whor3 that I am and did around 100... lol

Edit: I wasn't going to go Video because of the fact I will be getting a GTX 280 come the end of this week if not early next... I just really didn't want to by a loop for the GX2... NOt with me giving it up to EVGA this week

DaMulta · Jul 14, 2008, 07:02 AM

Clean up time lol

Sneak peek at just one of the many pics.

Cold Storm · Jul 14, 2008, 12:45 PM

Damulta, I've waited forever and a day to get water on EVERYTHING of yours!!! Finish it all ready!

DaMulta · Jul 14, 2008, 04:44 PM

I have been waiting on parts, but I have given up on waiting.
BTW
I'm making a guide

cdawall · Jul 14, 2008, 06:29 PM

im in the same boat waiting on the million things i need to show up but down to block and res

Cold Storm · Jul 15, 2008, 12:01 AM

Yeah, that's why I am just making it a one looper... That way I don't have to wait on parts.. if I want the GPU cooled, I'll grab it..

Cold Storm · Jul 17, 2008, 12:30 AM

I have a question for everyone. Do you guys prefer the one side of fans on the rad, or would you guys do the push and pull on the rad?

calvary1980 · Jul 17, 2008, 12:33 AM

I like Push Pull. sometimes you can't always have it because of radiator placement. nice Tygon Silver i'm looking into that Primoflex LRT Pro cost about the same, has anti-microbacterial coating and comes in transparent or uv.

- Christine

System Name:	Deployment build
Processor:	Phenom II B97@4080mhz 1.6v (24/7 4800mhz max clock)
Motherboard:	Asus Crosshair V Formula
Cooling:	Coolermaster V10 modded to 96w TEC, Scientific Rulian fans
Memory:	4x4GB Wintec ONE@1800 9-10-9 1.62v (24/7)
Video Card:	Sapphire 7950 3GB@1150/1400 1.27v
Hard Disk:	2x32GB STT SSD's raid 0, 1TB Samsung F3's, 1.5TB Seagate 7200.11
CRT/LCD Model:	STi 22"
Case:	Thermaltake Commandar MS-I Epic Edition
Sound Card:	E07K USB DAC->Fischer FA-002W High edition
PSU:	Antec TPQ-850 (Antec TPQ-1200 waiting for it at home)
Software:	windows 7 ultimate x64

Processor:	Intel Core 2 Quad Q6600 Kentsfield L724A629 @ 3.8Ghz 423x9 1.47v
Motherboard:	Abit IP-35 Pro Beta 16.B04 (vDroop)
Cooling:	6x Scythe S-Flex SFF21F, EK Multi Option 2 Port, dB-1 Compact, Swiftech MCR80, Swiftech Apogee GT
Memory:	2x1 OCZ Flex XLC PC-9200 @ 5-5-5-18 1220 2.3v
Video Card:	Inno3D Geforce 8800GTS 320
Hard Disk:	Western Digital Raptor X 150
Optical Drive:	Lite-on 20A1S
CRT/LCD Model:	Samsung Syncmaster 226BW 22"
Case:	Cooler Master RC-690
Sound Card:	Creative SoundBlaster X-Fi Xtreme Gamer 7.1
PSU:	Thermaltake ToughPower 1000

System Name:	His
Processor:	Intel i7 3770K Cooled with Swiftech Apogee Drive II
Motherboard:	Asus Maximus V Extreme
Cooling:	Swiftech MCR-320 Cooled With Corsair SP120 Fans
Memory:	4X4GB Corsair Dominator Platinum 2666 C11
Video Card:	Asus GTX680 Direct Cu II TOP
Hard Disk:	Corsair Force GT 180GB / Samsung Spinpoint F1 1TB
Optical Drive:	- - - - - - -
CRT/LCD Model:	Samsung 40" 120hz LCD
Case:	SilverStone Temjin TJ11
Sound Card:	Realtek on board > Sony receiver > Cerwin Vega's
PSU:	Corsair AX1200
Software:	Windows 7 Ultimate 64

Jul 13, 2008, 07:29 AM	#529
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	I have a 120GTX with it's own pump ready to be installed. Been waiting on a res, and a few other things. But I think I'm going to rig it out anyway DD-CPX1 12V Pump--Small pump DD12V-D5 Pump Fixed Speed by Laing Danger Den Single 5 1/4" Bay Reservoir DangerDen - 9800GTX blocks __________________ ocLIT The Hardware Punishers

System Name:	Work in progress
Processor:	AMD 955---4Ghz
Motherboard:	MSi GD70
Cooling:	OcZ Phase/water
Memory:	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card:	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Hard Disk:	SSD 64GB
Optical Drive:	DVD-L 16x
CRT/LCD Model:	Envision 24'' 1920x1200
Case:	Using the desk ATM
Sound Card:	Sucky onboard for now :(
PSU:	1000W TruePower Quattro

Jul 12, 2008, 04:16 PM	#527
calvary1980 Banned Join Date: Dec 2007 Location: Toronto, CA Posts: 1,602 (0.81/day) Thanks: 1,948 Thanked 319 Times in 286 Posts System Specs	didn't you just read my post you banana head - Christine

Jul 13, 2008, 03:40 PM	#530
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	Well I'm going to start on my runs in a few hours. __________________ ocLIT The Hardware Punishers

System Name:	macJuiced Pro (LiquidMac i5)
Processor:	Intel Core i5 2500K @ 4.11 GHz (1,260V idle - 1,248V load)
Motherboard:	Gigabyte GA-Z68XP-UD4 (F6 BIOS)
Cooling:	Phobya DC12-400 + Swiftech Apogee XT rev2 + MCW82 GPU + MCR-220XP (push->pull) + Micro Res v2
Memory:	16GB (4x4GB) Kingston HyperX DDR3 @ 1600Mhz (9-9-9-24 @ 1.65V)
Video Card:	Asus Radeon EAH6850 1GB DDR5 DirectCU (OC'd from factory @ 790MHz/1000MHz)
Hard Disk:	WD Caviar Black (1x1TB SATA3) + Seagate Barracuda (1x1TB SATA II + 1x2TB eSATA III)
Optical Drive:	Hitachi LG DVDRAM GH20NS10
CRT/LCD Model:	LG IPS231 1920x1080 @ 60Hz
Case:	PowerMac G5 Modded (Late 2005 version)
Sound Card:	Realtek ALC889 w/ Tritton PC510HDa // Native Instruments Audio Kontrol 1 w/ Logitech Speakers
PSU:	Thermaltake Toughpower XT 775W
Software:	MacOS X 10.7.5 "Lion" // Windows 7 Ultimate

Jul 13, 2008, 03:48 PM	#532
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	Res 1/2 into a T, then into one pump that is 1/2 and the other 3/8. The video cards from the 1/2 will go to 3/8 and back to 1/2 for the rad and then into a T back to the res. The chipset is from the 3/8s pump, and into the 3/8s rad, and back into the T to the res. __________________ ocLIT The Hardware Punishers

Jul 13, 2008, 03:54 PM	#533
SirKeldon Join Date: Feb 2008 Location: Barcelona, Catalonia (Spain) Posts: 426 (0.22/day) Thanks: 167 Thanked 155 Times in 92 Posts System Specs	In what loop will you be cooling your CPU, chipset or graph one? __________________ "I have no special talents, i'm just passionately curious" - Albert Einstein

Jul 13, 2008, 04:08 PM	#534
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	No cpu in my loop at all Video cards/Chipset, one loop, with 2 pumps. __________________ ocLIT The Hardware Punishers

Jul 13, 2008, 04:21 PM	#535
SirKeldon Join Date: Feb 2008 Location: Barcelona, Catalonia (Spain) Posts: 426 (0.22/day) Thanks: 167 Thanked 155 Times in 92 Posts System Specs	Oh ok, i understand better now __________________ "I have no special talents, i'm just passionately curious" - Albert Einstein

Jul 13, 2008, 04:23 PM	#536
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	It's all listed in my paint work lol __________________ ocLIT The Hardware Punishers

Jul 13, 2008, 05:24 PM	#537
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.42/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	my tygon showed up today just waiting on the maze4 from POS __________________

Jul 13, 2008, 05:50 PM	#538
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	On a Sunday? Loving my temps on my cpu __________________ ocLIT The Hardware Punishers

Jul 13, 2008, 05:52 PM	#539
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.42/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	it showed up yesterday i just went to the mailbox today __________________ Last edited by cdawall; Jul 13, 2008 at 06:00 PM.

Jul 14, 2008, 05:52 AM	#540
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.14/day) Thanks: 4,239 Thanked 3,047 Times in 2,493 Posts System Specs	You gotta love water! Just got done setting up my loop. Damn Jab-tech sent me a faulty 3/8th barb.. good thing I bought two extra for whatever... The treading on it was only done once, instead of 3 times around... I almost thought that My block was bad in threading! loving the temps also. At load at stock, I get what I got with the Xig and Delta's on it! lol __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

System Name:	Haru
Processor:	i7 3770k @ 4.5ghz
Motherboard:	Biostar Tz77xme4
Cooling:	Koolance C370si loop
Memory:	8gb G. Skill Trident X 2400mhz at 10-11-11-28
Video Card:	XFX Double D 7950 / Zotac 620 for physx
Hard Disk:	Samsung 830 128gb (os)Muskin Chronos 120gb, Pyro 120gb
Optical Drive:	Asus Blu-Ray (SBW-06C1S-U)
CRT/LCD Model:	Testing: Vizio 37" lcd tv / Viewsonic VX2450WM-LED 24" & Hanns G 28"
Case:	Cooler Master Cosmos II
Sound Card:	Auzentech X-fi Forte 7.1 Opamp modded
PSU:	Silverstone Strider Plus 1000w pp05 cables
Software:	Win7 Pro64
Benchmarks:	i5 750 4.62ghz pi runs // Evga FTW p55

Jul 14, 2008, 05:56 AM	#542
sneekypeet Unpaid Babysitter Join Date: Apr 2006 Posts: 19,003 (7.32/day) Thanks: 3,035 Thanked 5,487 Times in 3,950 Posts System Specs	Welcome to watercooling!!!!! May your pump always continue to flow, and may all your OC's be chilly. @ DM its just a CPU loop for now! __________________ Hers: ASUS Maximus V Gene / i7 3770K / Swiftech H220 / 4X8GB Corsair Dominators / ASUS GTX660 / Corsair AX-760 / Windows 7 64bit / Fractal Design ARC Midi R2 Test: Gigabyte Z68X-UD4-B3 / i7 2600K / A lot Of Coolers / Ripjaws Currently / HIS HD7950 IceQ Turbo / Silverstone SST-ST85F-G / Windows 7 64bit / InWin D-Frame Limited Edition

Jul 14, 2008, 07:02 AM	#544
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	Clean up time lol Sneak peek at just one of the many pics. __________________ ocLIT The Hardware Punishers

Jul 14, 2008, 12:45 PM	#545
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.14/day) Thanks: 4,239 Thanked 3,047 Times in 2,493 Posts System Specs	Damulta, I've waited forever and a day to get water on EVERYTHING of yours!!! Finish it all ready! __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

Jul 14, 2008, 04:44 PM	#546
DaMulta My stars went supernova Join Date: Aug 2006 Location: Oklahoma T-Town Posts: 10,337 (4.16/day) Thanks: 1,449 Thanked 1,477 Times in 1,113 Posts System Specs	I have been waiting on parts, but I have given up on waiting. BTW I'm making a guide __________________ ocLIT The Hardware Punishers

Jul 14, 2008, 06:29 PM	#547
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,021 (6.42/day) Thanks: 457 Thanked 2,753 Times in 2,222 Posts System Specs	im in the same boat waiting on the million things i need to show up but down to block and res __________________

Jul 15, 2008, 12:01 AM	#548
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.14/day) Thanks: 4,239 Thanked 3,047 Times in 2,493 Posts System Specs	Yeah, that's why I am just making it a one looper... That way I don't have to wait on parts.. if I want the GPU cooled, I'll grab it.. __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

Jul 17, 2008, 12:30 AM	#549
Cold Storm Battosai Join Date: Oct 2007 Location: In a library somewhere on this earth Posts: 10,566 (5.14/day) Thanks: 4,239 Thanked 3,047 Times in 2,493 Posts System Specs	I have a question for everyone. Do you guys prefer the one side of fans on the rad, or would you guys do the push and pull on the rad? __________________ The only way success is before work, is in the dictionary Support for the mind. Support for your hardware

Jul 17, 2008, 12:33 AM	#550
calvary1980 Banned Join Date: Dec 2007 Location: Toronto, CA Posts: 1,602 (0.81/day) Thanks: 1,948 Thanked 319 Times in 286 Posts System Specs	I like Push Pull. sometimes you can't always have it because of radiator placement. nice Tygon Silver i'm looking into that Primoflex LRT Pro cost about the same, has anti-microbacterial coating and comes in transparent or uv. - Christine

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Club X1950 xt 512 ram	cookiemonster	Graphics Cards	0	Apr 2, 2007 01:41 PM
Does Watercooling Suck?	Acer	Overclocking & Cooling	8	Mar 24, 2007 04:43 AM
Corsair Nautilus500 External Watercooling Kit	W1zzard	News	0	Feb 22, 2006 07:25 PM